Amphiphilicity-adaptable graphene quantum dots to stabilize pH-responsive pickering emulsions at a very low concentration

Carbon-based Flame Retardants for Polymers: A Bottom-up Review

This state-of-the-art review is geared toward elucidating the molecular understanding of the carbon-based flame-retardant mechanisms for polymers via holistic characterization combining detailed analytical assessments and computational material science. The use of carbon-based flame retardants, which include graphite, graphene, carbon nanotubes (CNTs), carbon dots (CDs), and fullerenes, in their pure and functionalized forms are initially reviewed to evaluate their flame retardancy performance and to determine their elevation of the flammability resistance on various types of polymers. The early transition metal carbides such as MXenes, regarded as next-generation carbon-based flame retardants, are discussed with respect to their superior flame retardancy and multifunctional applications. At the core of this review is the utilization of cutting-edge molecular dynamics (MD) simulations which sets a precedence of an alternative bottom-up approach to fill the knowledge gap through insights into the thermal resisting process of the carbon-based flame retardants, such as the formation of carbonaceous char and intermediate chemical reactions offered by the unique carbon bonding arrangements and microscopic in-situ architectures. Combining MD simulations with detailed experimental assessments and characterization, a more targeted development as well as a systematic material synthesis framework can be realized for the future development of advanced flame-retardant polymers.

Insights into the Efficient Release of the Polyacrylamide Drag Reducer via a pH-Responsive Inverse Polymer Emulsion

The enormous demand for petroleum consumption has resulted in the shortage of fossil resources, prompting the need to explore unconventional reservoirs. Polyacrylamide emulsion drag reducers are capable of inhibiting the turbulence of fracturing fluids for enhancing the reservoir stimulation results, but the poor dissolution efficiency of polyacrylamide emulsion drag reducers is the primary limitation to their large-scale application. Here, a pH-responsive ionic liquid surfactant, oleic acid/cyclohexanediamine (HOA/HMDA), is synthesized by using oleic acid (HOA) and cyclohexanediamine (HMDA). HOA/HMDA shows a remarkable pH-responsive behavior due to the pH-induced deconstruction of the HOA/HMDA structure. Interestingly, the HOA/HMDA-stabilized monomer emulsion exhibits an obvious pH-induced emulsion structure transformation behavior. In addition, the HOA/HMDA-stabilized monomer emulsion possesses excellent dynamic and storage stability, supporting the inverse emulsion polymerization of the polymer P(AM/AMPS/AA). The obtained P(AM/AMPS/AA) polymer inverse emulsions maintained stability for 30 days. Our finding proposes that the structure of the P(AM/AMPS/AA) polymer inverse emulsions changes with pH stimulation, which is capable of facilitating the release of polymers. P(AM/AMPS/AA) is released from the P(AM/AMPS/AA) polymer inverse emulsions within 30 s at a pH value of 12.06, along with a drag reduction rate of 62.54%. Obviously, the HOA/HMDA-stabilized P(AM/AMPS/AA) polymer inverse emulsions eliminate the contradiction between the stability and release of polyacrylamide emulsion drag reducers, which is promising for meeting the demands of reservoir stimulation.

Properties of Ophioglossum vulgatum L. extract Pickering emulsion stabilized by carbon dots and its potential use in cosmetics

Ophioglossum vulgatum L. (O. vulgatum) is a species of fern used in traditional Chinese medicine, however, its application in cosmetics has not yet been studied. This study obtained O. vulgatum extract using 70% ethanol solution and evaporation. Fourier Transform Infrared Spectrometer (FTIR) analysis identified many active components in O. vulgatum extract, such as polyols, amino acids, and flavonoids. A Pickering emulsion of O. vulgatum extract was also prepared, stabilized by a type of carbon dot based on l-arginine (CDs-Arg). The prepared Pickering emulsion was characterized by metallographic microscope and contact angle measurement. The results demonstrated that it was a pH-responsive O/W emulsion. Facial cleanser was then created using the prepared Pickering emulsion as the main component. When squeezed onto hands, the cleanser produced many delicate foams and caused no skin irritation. The prepared Pickering emulsion facilitated the use of O. vulgatum in facial cleanser.

The influence of α and α' subunits on SPI Pickering emulsions based on natural hybrid breeding varieties

In this study, food-grade protein nanoparticles (Wild-NPs, α-lack-NPs, α'-lack-NPs, and (α + α')-lack-NPs) were organized as emulsion stabilizers via thermal induction. The effects of α and α' subunits in soybean protein isolate (SPI) on Wild nanoparticle Pickering emulsion (Wild-NPPEs), α-lack nanoparticle Pickering emulsion (α-lack-NPPEs), α'-lack nanoparticle Pickering emulsion (α'-lack-NPPEs) and (α + α')-lack nanoparticle Pickering emulsion ((α + α')-lack-NPPEs) were investigated. The Pickering emulsion stabilization mechanism indicated that the α'-lack-NPs particle size, surface hydrophobicity, and contact angle were mostly comparatively large. Therefore, the absence of the α' subunit made the desorption of protein nanoparticles at the oil and water interface require higher energy. Through the hydrophobic interaction between molecules, the structure and properties of the emulsion were improved, showing good stability. The existence of α'-lack-NPPEs leads to the formation of a gel-like network in the emulsion, which increases the viscosity of the emulsion and makes the network structure of the emulsion more uniform and denser.

Hybrid Data-Driven Discovery of High-Performance Silver Selenide-Based Thermoelectric Composites

Optimizing material compositions often enhances thermoelectric performances. However, the large selection of possible base elements and dopants results in a vast composition design space that is too large to systematically search using solely domain knowledge. To address this challenge, a hybrid data-driven strategy that integrates Bayesian optimization (BO) and Gaussian process regression (GPR) is proposed to optimize the composition of five elements (Ag, Se, S, Cu, and Te) in AgSe-based thermoelectric materials. Data is collected from the literature to provide prior knowledge for the initial GPR model, which is updated by actively collected experimental data during the iteration between BO and experiments. Within seven iterations, the optimized AgSe-based materials prepared using a simple high-throughput ink mixing and blade coating method deliver a high power factor of 2100 µW m-1 K-2 , which is a 75% improvement from the baseline composite (nominal composition of Ag2 Se1 ). The success of this study provides opportunities to generalize the demonstrated active machine learning technique to accelerate the development and optimization of a wide range of material systems with reduced experimental trials.

CO2 responsive self-standing Pickering emulsion gel stabilized with rosin-based surfactant modified cellulose nanofibrils

Emulsion gel was developed to provide desirable texture, palatability and functionality to food products. Tunable stability of emulsions is often desired, as in certain situations, the chemical content release usually relies on emulsion induced destabilization of the droplet. However, the destabilization for emulsion gel is difficult because of the formation of highly entangled networks. To address this issue, a fully biobased Pickering emulsion gel stabilized by cellulose nanofibrils (CNF) modified with a CO2 responsive rosin-based surfactant, maleopimaric acid glycidyl methacrylate ester 3-dimethylaminopropylamine imide (MPAGN) was reported. The emulsification/de-emulsification can be reversibly regulated because this surfactant has sensitive CO2 responsive property. MPAGN can be reversibly between active cationic (MPAGNH+) and inactive nonionic (MPAGN) responsive to CO2 and N2. The microstructure of the emulsion gel was observed and compared before and after the response. The rheological properties of emulsion gel stabilized by different concentrations of MPAGNH+ and different contents of CNF were studied separately. As 0.2 wt% CNF was dispersed in 1 mM MPAGNH+ solution, the obtained emulsion can be self-standing for long duration. The rheology study indicated that these emulsions show typical gel characteristics with shear-thinning behavior. The stabilization mechanism of these gel emulsion is a synergistic effect caused by the combination of CO2 responsive Pickering emulsion and intertwined network caused by the hydrogen-bond interaction among CNF.

Novel use of graphene oxide quantum dots in a pickering emulsion as a Chlamydia trachomatis vaccine adjuvant

Graphene oxide quantum dots (GOQDs), which are graphene-based nanoparticles, are potential surfactant substitutes for stabilizing Pickering emulsions, due to their high surface area, biodegradability, and reasonable biocompatibility. In the present study, GOQDs stabilized Pickering emulsion (GQPE) was prepared by simple sonication and then used as an adjuvant to enhance immune responses to the Chlamydia trachomatis Pgp3 recombinant vaccine. Immunization of mice showed that GQPE robustly activates adaptive immunity by efficiently stimulating IgG, sIgA, IFN-γ, IL-4, and TNF-α production. Controlled release repository of antigens both in vivo and in vitro prolonged the immune response. In addition, GQPE enhanced dendritic cell recruitment at the injection site, ensuring rapid and efficient innate immunity. Safety assessment revealed that GQPE does not cause liver, kidney, and myocardial damage in mice, suggesting its favorable biocompatibility. This study provides evidence for the use of GOPE as a facile, effective, and safe strategy to enhance the immune response to Pgp3 recombinant vaccines.

pH and Magnetism Dual-Responsive Pickering Emulsion Stabilized by Dynamic Covalent Fe3O4 Nanoparticles

Herein, we describe pH and magnetism dual-responsive liquid paraffin-in-water Pickering emulsion stabilized by dynamic covalent Fe₃O₄ (DC-Fe₃O₄) nanoparticles. On one hand, the Pickerinfigureg emulsions are sensitive to pH variations, and efficient demulsification can be achieved by regulating the pH between 10 and 2 within 30 min. The dynamic imine bond in DC-Fe₃O₄ can be reversibly formed and decomposed, resulting in a pH-controlled amphiphilicity. The Pickering emulsion can be reversibly switched between stable and unstable states by pH at least three times. On the other hand, the magnetic Fe₃O₄ core of DC-Fe₃O₄ allowed rapid separation of the oil droplets from Pickering emulsions under an external magnetic field within 40 s, which was a good extraction system for purifying the aqueous solution contaminated by rhodamine B. The dual responsiveness enables Pickering emulsions to have better control of their stability and to be applied more broadly.

Pickering Emulsion Catalysis: Interfacial Chemistry, Catalyst Design, Challenges, and Perspectives

Pickering emulsions are particle-stabilized surfactant-free dispersions composed of two immiscible liquid phases, and emerge as attractive catalysis platform to surpass traditional technique barrier in some cases. In this review, we have comprehensively summarized the development and the catalysis applications of Pickering emulsions since the pioneering work in 2010. The explicit mechanism for Pickering emulsions will be initially discussed and clarified. Then, summarization is given to the design strategy of amphiphilic emulsion catalysts in two categories of intrinsic and extrinsic amphiphilicity. The progress of the unconventional catalytic reactions in Pickering emulsion is further described, especially for the polarity/solubility difference-driven phase segregation, "smart" emulsion reaction system, continuous flow catalysis, and Pickering interfacial biocatalysis. Challenges and future trends for the development of Pickering emulsion catalysis are finally outlined.

Zwitterionic Graphene Quantum Dots to Stabilize Pickering Emulsions for Controlled-Release Applications

Graphene quantum dots (GQDs) are a subset of the nanocarbon material family, which promise a wide spectrum of applications. Herein, we describe amphiphilic graphene quantum dots with zwitterionic features (ZGQDs), which are able to stabilize the oil/water interface. ZGQDs were fabricated by modifying GQDs with tertiary amine groups and alkyl groups. Moreover, the blocking and unblocking behavior of ZGQDs at the oil/water interface could be tuned by adjusting pH values in the aqueous phase. It would provide a flexible and adjustable method to manipulate interfacial properties of ZGQDs, which enabled a switchable molecular diffusion through a fluid-fluid interface. ZGQDs have shown well-controlled interfacial behavior under different pH conditions, indicating great potential for applications in controlled molecular diffusion based on nanoparticles demonstrated in this work.

Printing thermoelectric inks toward next-generation energy and thermal devices

The ability of thermoelectric (TE) materials to convert thermal energy to electricity and vice versa highlights them as a promising candidate for sustainable energy applications. Despite considerable increases in the figure of merit zT of thermoelectric materials in the past two decades, there is still a prominent need to develop scalable synthesis and flexible manufacturing processes to convert high-efficiency materials into high-performance devices. Scalable printing techniques provide a versatile solution to not only fabricate both inorganic and organic TE materials with fine control over the compositions and microstructures, but also manufacture thermoelectric devices with optimized geometric and structural designs that lead to improved efficiency and system-level performances. In this review, we aim to provide a comprehensive framework of printing thermoelectric materials and devices by including recent breakthroughs and relevant discussions on TE materials chemistry, ink formulation, flexible or conformable device design, and processing strategies, with an emphasis on additive manufacturing techniques. In addition, we review recent innovations in the flexible, conformal, and stretchable device architectures and highlight state-of-the-art applications of these TE devices in energy harvesting and thermal management. Perspectives of emerging research opportunities and future directions are also discussed. While this review centers on thermoelectrics, the fundamental ink chemistry and printing processes possess the potential for applications to a broad range of energy, thermal and electronic devices.