Preparation of NaNbO3 microcube with abundant oxygen vacancies and its high photocatalytic N2 fixation activity in the help of Pt nanoparticles

Recent progress in defect-engineered metal oxides for photocatalytic environmental remediation

Rapid industrial advancement over the last few decades has led to an alarming increase in pollution levels in the ecosystem. Among the primary pollutants, harmful organic dyes and pharmaceutical drugs are directly released by industries into the water bodies which serves as a major cause of environmental deterioration. This warns of a severe need to find some sustainable strategies to overcome these increasing levels of water pollution and eliminate the pollutants before being exposed to the environment. Photocatalysis is a well-established strategy in the field of pollutant degradation and various metal oxides have been proven to exhibit excellent physicochemical properties which makes them a potential candidate for environmental remediation. Further, with the aim of rapid industrialization of photocatalytic pollutant degradation technology, constant efforts have been made to increase the photocatalytic activity of various metal oxides. One such strategy is the introduction of defects into the lattice of the parent catalyst through doping or vacancy which plays a major role in enhancing the catalytic activity and achieving excellent degradation rates. This review provides a comprehensive analysis of defects and their role in altering the photocatalytic activity of the material. Various defect-rich metal oxides like binary oxides, perovskite oxides, and spinel oxides have been summarized for their application in pollutant degradation. Finally, a summary of existing research, followed by the existing challenges along with the potential countermeasures has been provided to pave a path for the future studies and industrialization of this promising field.

Interconnected Periodic Macroporous NaNbO3 for High-Efficiency Solar-Driven Photocatalytic Hydrogen Evolution

Highly ordered periodic macroporous structures have been extensively utilized to significantly enhance the photocatalytic activity. However, constructing 3D interconnected ordered porous ternary nanostructures with highly crystalline frameworks remains a formidable challenge. Here, we introduce the design and fabrication of 3D interconnected periodic macroporous NaNbO3 (PM NaNbO3) to effectively increase the density of surface-active sites and optimize the photogenerated carrier-transfer efficiency. By incorporating Pt as a cocatalyst, PM NaNbO3 exhibits an exceptional photocatalytic hydrogen generation rate of 10.04 mmol h-1 g-1, which is approximately six and five times higher than those of calcined NaNbO3 (C-NaNbO3) and hydrothermal NaNbO3 (H-NaNbO3), respectively. This outstanding performance can be attributed to the synergistic effects arising from its well-interconnected pore architecture, large surface area, enhanced light absorption capability, and improved charge carrier separation and transport efficiency. The findings presented in this study demonstrate an innovative approach toward designing hierarchically periodic macroporous materials for solar-driven hydrogen production.

Multisite Cocatalysis: Single atomic Pt2+/Pt0 active sites synergistically improve the simulated sunlight driven H2O-to-H2 conversion performance of Sb2S3 nanorods

Single atomic metal (SAM) cocatalysis is a potential strategy to improve the performance of photocatalytic materials. However, the cocatalytic mechanism of SAM sites in different valence states is rarely reported. Herein, single atomic Pt2+/Pt0 active sites were anchored on Sb2S3 nanorods to synergistically improve the photoactivity for hydrogen production under simulated sunlight. Experimental results and density functional theory calculations indicated that the coexistence of single atomic Pt2+/Pt0 sites synergistically improves the broadband light harvesting and promotes the Sb2S3-to-Pt electron transfer following inhibited photoexciton recombination kinetics and enhanced H proton adsorption capacity, resulting higher and more durable photoactivity for hydrogen production. Therefore, the optimal Sb2S3-Pt0.9‰ composite catalyst achieved remarkably enhanced hydrogen evolution rate of 1.37 mmol∙g-1∙h-1 (about 105-fold greater of that of Sb2S3 NRs) under faintly alkaline condition, and about 5.41 % of apparent quantum yield (AQY700 nm) was achieved, which shows obvious superiority in hydrogen production by contrasting with the reported Sb2S3-based photocatalysts and conventional semiconductor photocatalytic materials modified with noble metals. This study elucidate a well-defined mechanism of multisite cocatalysis for photoactivity improvement.

Spinel Phase Engineering Boosted Visible-Light Photocatalytic Activity in Co1-xSrxCr2O4

We synthesized Sr-doped spinel CoCr2O4 using the solution combustion method and characterized the structure, morphology, chemical state, and photocatalytic properties through different techniques such as X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and electrochemical impedance spectroscopy (EIS). 30-50 nm cuboid CoCr2O4 nanocrystals with Sr doping levels ranging from 0 to 0.6% were obtained; the increasing Sr doping deformed the coordination number of Co and Cr, transitioning to octahedral and tetrahedral units, inducing the phase transition from spinel to inverse spinel at 0.6% Sr content. This modification enhanced optical absorption, reduced the energy band gap, increased photoluminescence intensity, and maintained a high-spin state with oxygen vacancies. 0.6% Sr-doped CoCr2O4 demonstrated the highest photocatalytic efficiency at 93%. The XRD structure and photocatalytic activity remained at 87% over 7 cycles after 14 h. Employing degradation pathways and Mott-Schottky curves elucidated the enhancement mechanism.

Macroscopic Spontaneous Piezopolarization and Oxygen-Vacancy Coupled Robust NaNbO3/FeOOH Heterojunction for Pharmaceutical Drug Degradation and O2 Evolution: Combined Experimental and Theoretical Study

Prompt recombination of photoproduced charges in bulk and surface of a photocatalyst significantly impedes catalytic efficiency. To address these challenges, FeOOH nanorods (NRs) anchored NaNbO3 (NNO) piezoelectric microcubes (MCs) have been fabricated for ciprofloxacin (CIP) degradation and oxygen evolution through water splitting by coupling macroscopic spontaneous piezoelectric polarization and a built-in electric field. The local electric field induced by surface oxygen vacancies (Ovs) and orientation of FeOOH NRs over NNO MCs afford the polarization electric field a significant boost, driving the quick separation/migration of charge carriers from bulk to the surface. The polarized NNO/FeOOH composite with ample Ovs demonstrates an outstanding piezophotocatalytic CIP degradation of 93% in 1 h, higher than pristine materials (NNO and FeOOH), and a high O2 evolution rate of 1155 μmol h-1. The effect of piezoelectric polarization on the catalytic activity is supplemented by theoretical simulations. This work offers an avenue for selective pollutant remediation and water splitting through the rational design of piezoelectric polarization-mediated heterostructure systems with surface Ovs.

Structural Regulation of Photocatalyst to Optimize Hydroxyl Radical Production Pathways for Highly Efficient Photocatalytic Oxidation

Ring-opening of phenol in wastewater is the pivotal step in photocatalytic degradation. The highly selective generation of catalytical active species (•OH) to facilitate this process presents a significant scientific challenge. Therefore, a novel approach for designing photocatalysts with single-atom containment in metal-covalent organic frameworks (M-COFs) is proposed. The selection of imine-linked COFs containing abundant N and O-chelate sites provides a solid foundation for anchoring metal atom. These dispersed metal atom possess rapid accumulation and transfer capabilities for photogenerated electrons, while the periodic π-conjugated structure in 2D-COFs establishes an effective platform. Additionally, the Lewis acid properties of imine bonds in COFs can enhance the adsorption capacity toward gases with Lewis base properties, such as O2 and N2 . It is demonstrated that the Pd2+ @Tp-TAPT, designed based on this concept, exhibits efficient oxygen adsorption and follows the reaction pathway of O2 →•O2 - →H2 O2 →•OH with high selectivity, thereby achieving completely degradation of refractory phenol through photocatalysis within 10 min. It is anticipated that the selective generation of catalytic active species via advanced material design concepts will serve as a significant reference for achieving precise material catalysis in the future.

In Situ Fabrication of an S-Scheme NaNbO3/Bi2O2CO3 Heterojunction for Enhanced Performance in Photocatalytic Nitrogen Fixation

In this study, NaNbO3 microcubes were introduced during the preparation of Bi2O2CO3 nanosheets to construct a series of NaNbO3/Bi2O2CO3 heterojunctions with varying NaNbO3 content. Their photoactivities for N2 fixation were examined and compared. Results demonstrated that 7.5% NaNbO3/Bi2O2CO3 had the highest photoactivity. The NH3 production rate under simulated solar light is 453.1 μmol L-1 g-1 h-1, representing 2.0 and 3.8-fold increases compared to those of Bi2O2CO3 and NaNbO3, respectively. A comprehensive investigation encompassing the physical and chemical properties of the NaNbO3/Bi2O2CO3 photocatalyst was conducted. Bi2O2CO3 nanosheets were discovered to be distributed on the NaNbO3 microcubes surface. The addition of NaNbO3 exhibited nearly no effect on the photoabsorption performance and specific surface area of the Bi2O2CO3. However, the tight contact between NaNbO3 and Bi2O2CO3 and their appropriate band positions led to the formation of a heterojunction structure between them. The electron drift occurring in the interface region induces the creation of an internal electric field and energy band bending. This facilitates the transfer of photogenerated electrons and holes through an S-scheme mechanism, achieving efficient separation without compromising the redox performance. As a result, the NaNbO3/Bi2O2CO3 composite exhibits exceptional performance in the photocatalytic nitrogen fixation reaction. This study expands the application of S-scheme photocatalysts in the field of N2 reduction and provides insights into the preparation of efficient S-scheme photocatalysts.

Dopant-driven recombination delay and ROS enhancement in nanoporous Cd1-xCuxS heterogeneous photocatalyst for the degradation of DR-23 dye under visible light irradiation

Developing an efficient heterogeneous photocatalyst for environmental remediation and treatment strategies using visible light harvesting processes is promising but challenging. Herein, Cd1-xCuxS materials have been synthesized and characterized by precise analytical tools. Cd1-xCuxS materials exhibited excellent photocatalytic activity for direct Red 23 (DR-23) dye degradation in visible light irradiation. The operational parameters, like dopant concentration, photocatalyst dose, pH, and initial concentration of dye were investigated during the process. The photocatalytic degradation process follows pseudo-first-order kinetics. As compared to other tested materials, 5% Cu doped CdS material revealed superior photocatalytic performance for the degradation of DR-23 (k = 13.96 × 10-3 min-1). Transient absorption spectroscopy, EIS, PL, and transient photocurrent indicated that adding copper to the CdS matrix improved the separation of photo-generated charge carriers by lowering the recombination rate. Spin-trapping experiments recognized the photodegradation primarily based on secondary redox products, i.e., hydroxyl and superoxide radicals. According to by Mott-Schottky curves, photocatalytic mechanism and photo-generated charge carrier density were elucidated regarding dopant-induced valence and conduction bands shifting. Thermodynamic probability of radical formation in line with the altered redox potentials by Cu doping has been discussed in the mechanism. The identification of intermediates by mass spectrometry study also showed a plausible breakdown mechanism for DR-23. Moreover, samples treated with nanophotocatalyst displayed excellent results when tested for water quality metrics such as DO, TDS, BOD, and COD. Developed nanophotocatalyst shows high recyclability with superior heterogeneous nature. 5% Cu-doped CdS also exhibit strong photocatalytic activity for the degradation of colourless pollutant bisphenol A (BPA) under visible light (k = 8.45 × 10-3 min-1). The results of this study offer exciting opportunities to alter semiconductors' electronic band structures for visible-light-induced photocatalytic activity for wastewater treatment.

Facile transfer of surface plasmon electrons of Au-NPs to Zn3V2O8 surfaces: a case study of sunlight driven H2 generation from water splitting

For future energy perspectives, an effective way to produce H2 from water splitting is suggested using Zn3V2O8 photocatalyst as a semiconductor support. Further, to enhance the catalytic efficiency and stability of the catalyst, gold metal was deposited over the Zn3V2O8 surface by a chemical reduction method. For comparison, the Zn3V2O8 and gold-fabricated catalysts (i.e., Au@Zn3V2O8) were used for water splitting reactions. For structural and optical properties, various techniques, including XRD, UV-Vis DRS, FTIR, PL, Raman, SEM, EDX, XPS and EIS were used for the characterizations. The scanning electron microscope revealed the pebble-shaped morphology of the Zn3V2O8 catalyst. The FTIR and EDX results confirmed the purity and structural and elemental composition of the catalysts. Overall, 7.05 mmol g-1 h-1 H2 generation was observed over Au1.0@Zn3V2O8, which was ten times higher than bare Zn3V2O8. The results revealed that the higher H2 activities could be attributed to the Schottky barriers and surface plasmon electrons (SPRs). Thus the Au@Zn3V2O8 catalysts have potential to deliver higher hydrogen generation than Zn3V2O8 by water splitting.

Functionalized 2D defect g-C3N4 for artificial photosynthesis of H2O2 and synchronizing tetracycline fluorescence detection and degradation

Artificial photosynthesis of H₂O₂ is a clean production technology, which brings the synergistic effect to photodegradation of pollutants. Inspired by defect engineering, 2D defective carbon nitride (g-C₃N₄) photocatalyst was obtained via potassium ion assisted synthesis. Defective g-C₃N₄ is protonated and applied to photosynthesis of H₂O₂, H₂O₂ concentration produced reached 477.7 μM, which was approximately 5.27 times that by pristine g-C₃N₄. Additionally, defective g-C₃N₄ materials are borrowed to synchronizing tetracycline (TC) fluorescence detection and degradation, suggesting the catalyst existed bifunctional characteristics of TC detection and degradation. Meanwhile, metal impregnation engineering (molybdenum) was borrowed enhancing the electron-trapping ability in local region of defective g-C₃N₄, which takes advantages to the efficient degradation of TC. Furthermore, optical and electrical properties of photocatalysts were investigated in details by advanced material characterization testing. This work provides potential applications in the field of artificial photosynthesis and pollution degradation.

Modulating Lewis acidic active sites of Fe doped Bi2MoO6 nanosheets for enhanced electrochemical nitrogen fixation

Electrocatalytic nitrogen reduction reaction (NRR) for artificial ammonia synthesis under mild conditions has been considered as a promising alternative to the conventional Haber-Bosch method. The highly desired efficient NRR still faced with the mulriple challenges of adsorption and activation of N₂ and limited Faraday efficiency. Here, Fe-doped Bi₂MoO₆ nanosheets fabricated by one step synthesis exhibits high NH₃ yield rate of 71.01 μg·h^-1·mg^-1 and Faraday Efficiency of 80.12%. The decreased electron density of Bi in collaboration with Lewis acid active sites on Fe-doped Bi₂MoO₆, jointly enhance the adsorption and activation of Lewis basic N₂. Benefited from surface texture optimization and the superior ability of N₂ adsorption and activation, the increasing density of effective active sites greatly improve the NRR behavior. This work provides new opportunities for developing efficient and highly selective catalysts for NH₃ synthesis via NRR.

Revisiting the roles of dopants in g-C3N4 nanostructures for piezo-photocatalytic production of H2O2: a case study of selenium and sulfur

The sustainable production of hydrogen peroxide (H₂O₂) from oxygen and water has become an exciting research hotspot in the scientific community due to the importance of this fine chemical in various fields. Besides, piezo-photocatalysis is an emerging star for generating H₂O₂ from these green reagents. For developing catalysts for this specific application, doping heteroatoms into carbon-based materials such as graphitic carbon nitrides (g-C₃N₄) is a growing fascination among worldwide scientists. However, systematic study on the effects of doping precursors on the catalytic results is still rare. Herein, we fabricated sulfur (S) and selenium (Se) doped g-C₃N₄ with various doping precursors to evaluate the effects of these agents on the production of H₂O₂ under light and ultrasound irradiation. Based on the results, Se-doped g-C₃N₄ gave an outstanding catalytic performance compared to S-doped g-C₃N₄, even in a significantly low quantity of Se. In order to fully understand the chemical, physical, optical, and electronic properties of pristine g-C₃N₄ and its derivatives, the as-prepared materials were thoroughly analyzed with various tools. Thus, this study would give more profound insights into doping techniques for carbon-based materials and encourage further research on the design and development of piezo-photocatalysts for practical applications.