Bioremediation for coal-fired power stations using macroalgae

Macroalgal deep genomics illuminate multiple paths to aquatic, photosynthetic multicellularity

Macroalgae are multicellular, aquatic autotrophs that play vital roles in global climate maintenance and have diverse applications in biotechnology and eco-engineering, which are directly linked to their multicellularity phenotypes. However, their genomic diversity and the evolutionary mechanisms underlying multicellularity in these organisms remain uncharacterized. In this study, we sequenced 110 macroalgal genomes from diverse climates and phyla, and identified key genomic features that distinguish them from their microalgal relatives. Genes for cell adhesion, extracellular matrix formation, cell polarity, transport, and cell differentiation distinguish macroalgae from microalgae across all three major phyla, constituting conserved and unique gene sets supporting multicellular processes. Adhesome genes show phylum- and climate-specific expansions that may facilitate niche adaptation. Collectively, our study reveals genetic determinants of convergent and divergent evolutionary trajectories that have shaped morphological diversity in macroalgae and provides genome-wide frameworks to understand photosynthetic multicellular evolution in aquatic environments.

Algal Biochar-Metal Nanocomposite Particles Tailor the Hydration Kinetics and Compressive Strength of Portland Cement Paste

Biochar can improve the mechanical properties of portland cement paste and concrete. In this work, we produced algal biochar-zinc (biochar-Zn) and algal biochar-calcium (biochar-Ca) nanocomposite particles and studied their effect on the hydration kinetics and compressive strength of cement paste. Results show that 3 wt % biochar-Zn delayed peak heat evolution during cement hydration from 8.3 to 10.0 h, while 3 wt % addition of biochar-Ca induced a minor acceleration of peak heat from 8.3 to 8.2 h. Both biochar-Zn and biochar-Ca nanocomposite particles increased the compressive strength of cement paste at 28 days by 22.6 and 17.0%, respectively. Data substantiate that retardation or minor acceleration of the reaction kinetics was due exclusively to the presence of Zn and Ca phases, respectively, while the enhanced strength was attributed to a nucleation effect induced by such phases and the internal curing effect of biochar.

Microalgae are not an umbrella solution for power industry waste abatement but could play a role in their valorization

Microalgae have long been regarded as a promising solution for biological carbon abatement from the power industry, offering renewable biomass without competing for land or water resources used for food crops. In this study, we extensively examined the application of photosynthetic microorganisms for closing carbon, nitrogen, and micronutrient loops in the power industry. Subsequently, we explored the bottom-up integration of algal biorefineries into power industry waste streams for increased economic benefits and reduced environmental impacts. Analysis of the available data indicated that microalgae integration with the power industry is primarily performed using flue-gas-assisted cultivation. This approach allows for carbon sequestration typically below one gram per liter per day, too low to significantly impact carbon abatement at achievable scales of microalgae cultivation. Alternative approaches are also being explored. For example, soluble bicarbonate platforms allow for higher biomass productivity and temporary carbon storage. Meanwhile, the use of ashes and waste heat and thermophilic strains can result in lower cultivation costs and better control of cultivation conditions. These approaches offer further incremental improvement to microalgae-based carbon abatement systems in the power industry but are unlikely to be an umbrella solution for carbon reduction. Consequently, in the near term, microalgae-based carbon valorization systems are likely to be limited to niche applications involving the synthesis of high-value products. For microalgae to truly transform carbon abatement processes radical improvements in both biology and engineering approaches are urgently needed.

Freshwater Macroalgae, Oedogonium, Grown in Wastewater Reduce Diet-Induced Metabolic Syndrome in Rats

Macroalgae produce compounds with industrial, pharmaceutical and nutritional applications. In this study, biomass from the freshwater macroalgal genus Oedogonium was grown in either treated municipal wastewater (M) or ash dam water from a coal-fired power station (D). The biomass was investigated for its metabolic responses in high-carbohydrate, high-fat diet-fed rats, a model of human metabolic syndrome. The Oedogonium biomass cultured in M contained higher amounts of K, Mg, omega-3 polyunsaturated fatty acids (PUFA), insoluble fibre and β-carotene, while biomass grown in D contained higher amounts of Al, Fe, V, Zn, Mn and As. Biomass from M further increased body weight and inflammation in the heart and colon in high-carbohydrate, high-fat diet-fed rats. In contrast, biomass from D prevented changes in metabolic, cardiovascular and liver parameters without changing tissue histology. We suggest that increased intake of metals and metalloids through macroalgal biomass from D may decrease abdominal fat deposition while polysaccharides, PUFA and carotenoids from M may improve blood glucose responses in an obesogenic diet. Thus, macroalgal biomass grown in different wastewater sources could be acceptable for feed or food applications. This biomass could even provide potential health benefits in diet-induced metabolic syndrome.

Biotechnology of Microorganisms from Coal Environments: From Environmental Remediation to Energy Production

Simple Summary

Despite the wide perception that coal environments are extreme habitats, they harbor resident microbial communities. Coal-associated habitats, such as coal mine areas/drainages, spoil heaps, and coalbeds, are defined as complex ecosystems with indigenous microbial groups and native microecological networks. Resident microorganisms possess rich functional potentials and profoundly shape a range of biotechnological processes in the coal industry, from production to remediation.

Abstract

It was generally believed that coal sources are not favorable as live-in habitats for microorganisms due to their recalcitrant chemical nature and negligible decomposition. However, accumulating evidence has revealed the presence of diverse microbial groups in coal environments and their significant metabolic role in coal biogeochemical dynamics and ecosystem functioning. The high oxygen content, organic fractions, and lignin-like structures of lower-rank coals may provide effective means for microbial attack, still representing a greatly unexplored frontier in microbiology. Coal degradation/conversion technology by native bacterial and fungal species has great potential in agricultural development, chemical industry production, and environmental rehabilitation. Furthermore, native microalgal species can offer a sustainable energy source and an excellent bioremediation strategy applicable to coal spill/seam waters. Additionally, the measures of the fate of the microbial community would serve as an indicator of restoration progress on post-coal-mining sites. This review puts forward a comprehensive vision of coal biodegradation and bioprocessing by microorganisms native to coal environments for determining their biotechnological potential and possible applications.

A holistic zero waste biorefinery approach for macroalgal biomass utilization: A review

The growing concerns over the depleting fossil fuels and increase in the release of greenhouse gas emissions have necessitated the search for the potential biomass source for alternative energy generation. In this context, third generation biomass specifically maroalgae has gained a lot of research interest in the recent years for energy and products generation such as ethanol, butanol, alginates, agars, and carrageenans. There are a few reviews available in scientific domain on macroalgal biomass utilization for bioethanol production but none of them has addressed precisely from phenolic precursor compounds to the entire ethanol production process and its bottlenecks. Here, we explained critically the processes involved in bioethanol, value added products and chemicals production utilizing macroalgal biomass as a feedstock along with its zero waste feasibility approach. Apart from this, we have also summarized the major issues linked to the macroalgae based biofuels and bioproducts generation processes and their possible corrective measures. Biorefinery is a promising way to generate multiple products from a single source with short processing time. Thus, this review also focuses on the recent advancement in the macroalgal biomass scaling up and how this could help in the growth of macroalgal biorefinery industry in the near future.

Bioproduct Potential of Outdoor Cultures of Tolypothrix sp.: Effect of Carbon Dioxide and Metal-Rich Wastewater

Rising CO2 levels, associated climatic instability, freshwater scarcity and diminishing arable land exacerbate the challenge to maintain food security for the fast growing human population. Although coal-fired power plants generate large amounts of CO2 emissions and wastewater, containing environmentally unsafe concentrations of metals, they ensure energy security. Nitrogen (N2)-fixation by cyanobacteria eliminate nitrogen fertilization costs, making them promising candidates for remediation of waste CO2 and metals from macronutrient-poor ash dam water and the biomass is suitable for phycocyanin and biofertilizer product development. Here, the effects of CO2 and metal mixtures on growth, bioproduct and metal removal potential were investigated for the self-flocculating, N2-fixing freshwater cyanobacterium Tolypothrix sp. Tolypothrix sp. was grown outdoors in simulated ash dam wastewater (SADW) in 500 L vertical bag suspension cultures and as biofilms in modified algal-turf scrubbers. The cultivation systems were aerated with air containing either 15% CO2 (v/v) or not. CO2-fertilization resulted in ∼1.25- and 1.45-fold higher biomass productivities and ∼40 and 27% increased phycocyanin and phycoerythrin contents for biofilm and suspension cultures, respectively. CO2 had no effect on removal of Al, As, Cu, Fe, Sr, and Zn, while Mo removal increased by 37% in both systems. In contrast, Ni removal was reduced in biofilm systems, while Se removal increased by 73% in suspension cultures. Based on biomass yields and biochemical data obtained, net present value (NPV) and sensitivities analyses used four bioproduct scenarios: (1) phycocyanin sole product, (2) biofertilizer sole product, (3) 50% phycocyanin and 50% biofertilizer, and (4) 100% phycocyanin and 100% biofertilizer (residual biomass) for power station co-located and not co-located 10 ha facilities over a 20-year period. Economic feasibility for the production of food-grade phycocyanin either as a sole product or with co-production of biofertilizer was demonstrated for CO2-enriched vertical and raceway suspension cultures raised without nitrogen-fertilization and co-location with power stations significantly increased profit margins.

Bio-fixation of flue gas from thermal power plants with algal biomass: Overview and research perspectives

Rate of energy production is reflecting growth of nations and most of energy produced from the coal and natural gas-based thermal power plants (TPPs). Flue gas (point sources of emission) are main exhaustible form of gases that come from thermal power plants and are continuously promoting climate change and various environmental problems in global scenario. The present available technologies of flue gas treatment are energy and cost-intensive process. Among the available techniques for fixation of flue-gases at sustainable part, microalgal bio-fixation of flue gas is an alternative promising and competent technology with assurance of eco-friendly path of low energy and low-cost solution for pollution abetment with production of value added products. According to mechanism involves during photosynthetic process of microalgae, it utilizes atmospheric CO₂ and CO₂ from flue gases for their growth. Past, present and future treatment technologies for flue gas with their challenges are discussed. Recent experimental studies and commercially available bioreactors are very particular for bio-fixation of flue gas from thermal power plants are also reviewed with their future perspectives. The commercial viability of process with specific microalgal strains and utilized biomass for further value-added products are suggested with future limitations.

Heavy metal bioremediation of coal-fired flue gas using microalgae under different CO2 concentrations

Sustainability assessments have revealed that integration of CO₂ from coal-fired flue gas with microalgae cultivation systems could reduce greenhouse gas emissions. The technical goal of this integration is to utilize exhaust from coal power plants to enhance microalgae cultivation processes by capturing and recycling of carbon dioxide from a more toxic to a less toxic form. However, heavy metals are also introduced along with CO2 to the cultivation system which could contaminate biomass and have deleterious effects on products derived from such systems. The present study aimed at shedding some light on capability of microalgae to sustain their diversity and propagate them under different CO₂ concentrations from coal-fired flue gas. Mixed microalgal culture was grown in nutrient rich medium and heavy metals (Al, Cu, Fe, Mn and Zn) are expected to be introduced from flue gas. Three concentrations (1%, 3% and 5.5%) of CO₂ were evaluated (reference concentrations from flue gas). Comparative studies were carried out by flue gas and control systems in photobioreactors. Under the 3% CO₂ (30% flue gas), the highest fraction of B, Mn and Zn were found to be internalized by the cells (46.8 ±9.45 gL-1, 253.66 ± 40.62 gL-1 and 355.5 ±50.69 gL-1 respectively) during their cultivation period into biomass. Hence, microalgae may offer solution to two major challenges: providing potential biofuel feedstock for energy security and reducing heavy metal pollution to the air.

Effect of CO2 and metal-rich waste water on bioproduct potential of the diazotrophic freshwater cyanobacterium, Tolypothrix sp

Continued economic growth is reliant on stable, affordable energy, requiring at present fossil fuel-derived energy production. Coal-fired power stations produce metal-rich but macro-nutrient-poor waste waters and emit flue gas, containing ∼10% CO2. Algae and cyanobacteria remediate metals and CO2, but use of N2-fixing (diazotrophic) cyanobacteria can reduce nitrogen-fertilization costs. The resulting biomass represents a promising source for biofuel and bio-product development. This study investigated the effect of CO2- and trace metals on growth performance, biochemical profiles and metal content of the freshwater diazotrophic cyanobacterium Tolypothrix sp. to assess bioproduct potential. Aerated 2 L batch cultures were grown in simulated ash-dam water (SADW) and BG11 without nitrogen (BG11(-N) controls). Supplied air was supplemented with either 15% CO2 or not (non-CO2 controls). CO2 supplementation resulted in 2.4 and 3.3-fold higher biomass productivities and 1.3 and 1.2-fold higher phycocyanin and phycoerythrin contents, whilst metals (media) had no effect. Al, Cu, Ni and V were more efficiently removed (50-90%) with CO2-addition, while As, Mo, Se and Sr removal was higher (30-87%) for non-CO2 controls. No significant effect on Zn and Fe removal was evident. Calculated biomass metal concentrations, at quantities required to meet N-requirements of wheat, suggests no metal toxicity when applied as a mineral-nitrogen biofertilizer. With a carbohydrate content of 50%, the biomass is also suitable for bioethanol production. In summary, Tolypothrix sp. raised in ash dam waste water supplemented with flue gas CO2 could yield high-value phycobiliproteins, bioethanol or biogas, and mineral-rich nitrogen fertilizer which would offset remediation costs and improve agricultural productivity.

Impact of Flue Gas Compounds on Microalgae and Mechanisms for Carbon Assimilation and Utilization

To shift the world to a more sustainable future, it is necessary to phase out the use of fossil fuels and focus on the development of low-carbon alternatives. However, this transition has been slow, so there is still a large dependence on fossil-derived power, and therefore, carbon dioxide is released continuously. Owing to the potential for assimilating and utilizing carbon dioxide to generate carbon-neutral products, such as biodiesel, the application of microalgae technology to capture CO₂ from flue gases has gained significant attention over the past decade. Microalgae offer a more sustainable source of biomass, which can be converted into energy, over conventional fuel crops because they grow more quickly and do not adversely affect the food supply. This review focuses on the technical feasibility of combined carbon fixation and microalgae cultivation for carbon reuse. A range of different carbon metabolisms and the impact of flue gas compounds on microalgae are appraised. Fixation of flue gas carbon dioxide is dependent on the selected microalgae strain and on flue gas compounds/concentrations. Additionally, current pilot-scale demonstrations of microalgae technology for carbon dioxide capture are assessed and its future prospects are discussed. Practical implementation of this technology at an industrial scale still requires significant research, which necessitates multidisciplinary research and development to demonstrate its viability for carbon dioxide capture from flue gases at the commercial level.

Lignocellulosic waste valorisation strategy through enzyme and biogas production

Lignocellulosic wastes are generally pre-treated to facilitate the hydrolysis stage during the anaerobic digestion process. A process consisting of solid state fermentation carried out by white rot fungi and anaerobic digestion was evaluated on corn stover to produce ligninolytic enzymes and biogas. The enzyme production was quantified every 3d for a month at 30°C, and three fungal strains and two particle sizes of waste were compared. Of the main outcomes, Pleurotus eryngii produced the highest laccase enzyme activity compared with Pleurotus ostreatus and Trametes versicolor. Furthermore, this activity was improved by 16% when copper was used as an enzyme inducer. On the other hand, most of the conditions studied showed a decrease in maximum biogas production compared with untreated waste, the addition of copper decreased biogas production by 20%. Despite the above, Pleurotus eryngii showed promising results allowing a 19% increase of biogas production and high enzyme production values.