Evaluation of the influence of methane and copper concentration and methane mass transport on the community structure and biodegradation kinetics of methanotrophic cultures

High production of ectoine from methane in genetically engineered Methylomicrobium alcaliphilum 20Z by preventing ectoine degradation

BACKGROUND

Methane is a greenhouse gas with a significant potential to contribute to global warming. The biological conversion of methane to ectoine using methanotrophs represents an environmentally and economically beneficial technology, combining the reduction of methane that would otherwise be combusted and released into the atmosphere with the production of value-added products.

RESULTS

In this study, high ectoine production was achieved using genetically engineered Methylomicrobium alcaliphilum 20Z, a methanotrophic ectoine-producing bacterium, by knocking out doeA, which encodes a putative ectoine hydrolase, resulting in complete inhibition of ectoine degradation. Ectoine was confirmed to be degraded by doeA to N-α-acetyl-L-2,4-diaminobutyrate under nitrogen depletion conditions. Optimal copper and nitrogen concentrations enhanced biomass and ectoine production, respectively. Under optimal fed-batch fermentation conditions, ectoine production proportionate with biomass production was achieved, resulting in 1.0 g/L of ectoine with 16 g/L of biomass. Upon applying a hyperosmotic shock after high-cell-density culture, 1.5 g/L of ectoine was obtained without further cell growth from methane.

CONCLUSIONS

This study suggests the optimization of a method for the high production of ectoine from methane by preventing ectoine degradation. To our knowledge, the final titer of ectoine obtained by M. alcaliphilum 20ZDP3 was the highest in the ectoine production from methane to date. This is the first study to propose ectoine production from methane applying high cell density culture by preventing ectoine degradation.

Zinc and copper supplements enhance trichloroethylene removal by Pseudomonas plecoglossicida in water

The effects of two microelements, zinc and copper, on the aerobic co-metabolic removal of trichloroethylene (10 mg/L) by the isolate Pseudomonas plecoglossicida were investigated. The strain was previously isolated from a petroleum-contaminated site using toluene (150 mg/L) as substrate. Different concentrations (1, 10 and 100 mg/L) of microelements provided with SO42- and Cl- were tested. The results showed the supplement of Zn2+ and Cu2+ at the low concentration (1 mg/L) significantly enhanced cell growth. The removal efficiencies for toluene and trichloroethylene were also enhanced at the low concentration (1 mg/L) of Zn2+ and Cu2+. Compared to the control without zinc supplement, higher concentrations of zinc (10 and 100 mg/L) enhanced the removal efficiencies for both toluene and trichloroethylene in the first three days but showed some inhibitory effect afterward. However, the higher concentrations of Cu2+ (10 and 100 mg/L) always showed inhibitory to the toluene removal while showing inhibitory to the TCE removal after three days. For both Zn2+ and Cu2+, the anions SO42- and Cl- did not show significant difference in their effects on the toluene removal. A possible mechanism for Zn2+ and Cu2+ to enhance the removal of toluene and trichloroethylene would be their involvement in toluene oxygenase-based transformation processes. In addition, high concentrations of Zn2+ and Cu2+ ions could be removed from the liquid by the cells accordingly. The results imply a potential of supplementing low concentrations of zinc and copper to enhance bioremediation of the sites co-contaminated with toluene and trichloroethylene.

Influence of operational conditions on the performance of biogas bioconversion into ectoines in pilot bubble column bioreactors

The application of biogas as a low-priced substrate for the production of ectoines constitutes an opportunity to decrease their production costs and to enhance the viability of anaerobic digestion. The influence of operational conditions on CH₄-biogas biodegradation and on ectoines production yields was assessed in continuous pilot bubble column bioreactors. The rise in biomass concentration from 1 to 3 g L^-1 resulted in a decrease in the specific ectoine content from 42 ± 8 to 30 ± 4 mg_ectoine g_VSS^-1. The concentration of Cu²⁺ and Mg²⁺ did not impact process performance, while the use of ammonium as N source resulted in low CH₄ biodegradation and ectoine yields (13 ± 7 mg_ectoine g_VSS^-1). The increase in CH₄ content from 4.5 to 9 %v·v^-1 enhanced CH₄ removal efficiency. Process operation at NaCl concentrations of 3 %w·w^-1 instead of 6 %w·w^-1 decreased the ectoine yield to 17 mg_ectoine g_VSS^-1. Finally, Methylomicrobiumburyatense was identified as the dominant species.

Enhancement of Methane Catalysis Rates in Methylosinus trichosporium OB3b

Particulate methane monooxygenase (pMMO), a membrane-bound enzyme having three subunits (α, β, and γ) and copper-containing centers, is found in most of the methanotrophs that selectively catalyze the oxidation of methane into methanol. Active sites in the pMMO of Methylosinus trichosporium OB3b were determined by docking the modeled structure with ethylbenzene, toluene, 1,3-dibutadiene, and trichloroethylene. The docking energy between the modeled pMMO structure and ethylbenzene, toluene, 1,3-dibutadiene, and trichloroethylene was -5.2, -5.7, -4.2, and -3.8 kcal/mol, respectively, suggesting the existence of more than one active site within the monomeric subunits due to the presence of multiple binding sites within the pMMO monomer. The evaluation of tunnels and cavities of the active sites and the docking results showed that each active site is specific to the radius of the substrate. To increase the catalysis rates of methane in the pMMO of M. trichosporium OB3b, selected amino acid residues interacting at the binding site of ethylbenzene, toluene, 1,3-dibutadiene, and trichloroethylene were mutated. Based on screening the strain energy, docking energy, and physiochemical properties, five mutants were downselected, B:Leu31Ser, B:Phe96Gly, B:Phe92Thr, B:Trp106Ala, and B:Tyr110Phe, which showed the docking energy of -6.3, -6.7, -6.3, -6.5, and -6.5 kcal/mol, respectively, as compared to the wild type (-5.2 kcal/mol) with ethylbenzene. These results suggest that these five mutants would likely increase methane oxidation rates compared to wild-type pMMO.

Two-stage integrated process for bio-methanol production coupled with methane and carbon dioxide sequestration: Kinetic modelling and experimental validation

The study demonstrates a two-stage integrated process for bio-methanol production using Methylosinus trichosporium NCIMB 11131, coupled with sequestration of methane and carbon dioxide. The first stage involved generation of methanotrophic biomass via sequestration of methane; which was used as biocatalyst to reduce carbon dioxide into methanol in the second stage. Maximum biomass titer of 3.39 g L^-1 and productivity of 0.60 g L^-1 d^-1 were achieved in semi-batch stirred tank reactor with methane concentration in the inlet gas mixture of 2.5% v/v and gas flow rate of 0.5 vvm. Methane fixation rate was estimated to be 0.32 g L^-1 d^-1. Maximum methanol titer of 0.58 g L^-1 was achieved at headspace carbon dioxide concentration of 50% v/v and liquid to headspace volume ratio 10:90. Subsequently, a kinetic model was developed to predict and understand the system behaviour in terms of dynamic profile of growth, methanol formation, concentration of dissolved methane or carbon dioxide in the aqueous phase and headspace carbon dioxide concentration, in response to varying process parameters. The model can serve as a tool for estimation of process parameters and aid in overall production optimization.

Methanotrophic denitrification in wastewater treatment: microbial aspects and engineering strategies

Anaerobic technologies are consolidated for sewage treatment and are the core processes for mining marketable products from waste streams. However, anaerobic effluents are supersaturated with methane, which represents a liability regarding greenhouse gas emissions. Meanwhile, anaerobic technologies are not capable of nitrogen removal, which is required to ensure environmental protection. Methane oxidation and denitrification processes can be combined to address both issues concurrently. Aerobic methane oxidizers can release intermediate organic compounds that can be used by conventional denitrifiers as electron donors. Alternatively, anoxic methanotrophic species combine methane oxidation with either nitrate or nitrite reduction in the same metabolism. Engineered systems need to overcome the long doubling times and low NO_x consumption rates of anoxic methanotrophic microorganisms. Another commonly reported bottleneck of methanotrophic denitrification relates to gas-liquid mass transfer limitations. Although anaerobic effluents are supersaturated with methane, experimental setups usually rely on methane supply in a gaseous mode. Hence, possibilities for the application of methane-oxidation coupled to denitrification in full scale might be overlooked. Moreover, syntrophic relationships among methane oxidizers, denitrifiers, nitrifiers, and other microorganisms (such as anammox) are not well understood. Integrating mixed populations with various metabolic abilities could allow for more robust methane-driven wastewater denitrification systems. This review presents an overview of the metabolic capabilities of methane oxidation and denitrification and discusses technological aspects that allow for the application of methanotrophic denitrification at larger scales.

Methanotrophs: Discoveries, Environmental Relevance, and a Perspective on Current and Future Applications

Methane is the final product of the anaerobic decomposition of organic matter. The conversion of organic matter to methane (methanogenesis) as a mechanism for energy conservation is exclusively attributed to the archaeal domain. Methane is oxidized by methanotrophic microorganisms using oxygen or alternative terminal electron acceptors. Aerobic methanotrophic bacteria belong to the phyla Proteobacteria and Verrucomicrobia, while anaerobic methane oxidation is also mediated by more recently discovered anaerobic methanotrophs with representatives in both the bacteria and the archaea domains. The anaerobic oxidation of methane is coupled to the reduction of nitrate, nitrite, iron, manganese, sulfate, and organic electron acceptors (e.g., humic substances) as terminal electron acceptors. This review highlights the relevance of methanotrophy in natural and anthropogenically influenced ecosystems, emphasizing the environmental conditions, distribution, function, co-existence, interactions, and the availability of electron acceptors that likely play a key role in regulating their function. A systematic overview of key aspects of ecology, physiology, metabolism, and genomics is crucial to understand the contribution of methanotrophs in the mitigation of methane efflux to the atmosphere. We give significance to the processes under microaerophilic and anaerobic conditions for both aerobic and anaerobic methane oxidizers. In the context of anthropogenically influenced ecosystems, we emphasize the current and potential future applications of methanotrophs from two different angles, namely methane mitigation in wastewater treatment through the application of anaerobic methanotrophs, and the biotechnological applications of aerobic methanotrophs in resource recovery from methane waste streams. Finally, we identify knowledge gaps that may lead to opportunities to harness further the biotechnological benefits of methanotrophs in methane mitigation and for the production of valuable bioproducts enabling a bio-based and circular economy.

Effects of heavy metals on microbial communities in sediments and establishment of bioindicators based on microbial taxa and function for environmental monitoring and management

Heavy metals have always been a research hotspot due to their persistence, hazard and bioaccumulation. Microorganisms are highly sensitive to heavy metal pollution and play an important role in the material cycling and energy flow of the ecosystem. In order to further explore the influence of heavy metals on the diversity, composition, and function of microbial communities in the wetland sediment ecosystem, and to find suitable indicators to reflect heavy metal pollution status, we collected sediments from Huangjinxia nature reserve and determined the physicochemical properties, heavy metal (Cu, Cr, Ni, Pb, Zn, and Mn) concentrations, and microbial information. We found that: the contamination status of the study area stood at a moderate level evaluated by the pollution load index (PLI); heavy metals explained more of microbial community variation than the sediment physicochemical properties; in particular, Cr and Mn negatively affected microbial α-diversity; heavy metals significantly affected the structure of microbial communities, elements Cr, Pb, and Zn showed uniformly negative associations with the relative abundance of bacteria Nitrospirae (including class Nitrospira and order Nitrospirales), Bacteroidetes (including class Bacteroidia), and Verrucomicrobia; moreover, heavy metals affected predicted functions of microbial communities, including metabolic functions, genetic information processes, and functions related to the carbon cycle and the nitrogen cycle. Based on the relative abundance of sensitive microbial taxa and predicted functions, bioindicators [Bacteroidia], 1/[Nitrospira], 1/[Nitrification], and 1/[Aerobic nitrite oxidation] were established to reflect and predict the contamination status of heavy metals in sediments. Our in-depth research on the effects of heavy metals on microorganisms and the establishment of bioindicators provide references and new perspectives for environmental monitoring and management.

Environmental and Microbial Interactions Shape Methane-Oxidizing Bacterial Communities in a Stratified Lake

In stratified lakes, methane-oxidizing bacteria (MOB) are strongly mitigating methane fluxes to the atmosphere by consuming methane entering the water column from the sediments. MOB communities in lakes are diverse and vertically structured, but their spatio-temporal dynamics along the water column as well as physico-chemical parameters and interactions with other bacterial species that drive the community assembly have so far not been explored in depth. Here, we present a detailed investigation of the MOB and bacterial community composition and a large set of physico-chemical parameters in a shallow, seasonally stratified, and sub-alpine lake. Four highly resolved vertical profiles were sampled in three different years and during various stages of development of the stratified water column. Non-randomly assembled MOB communities were detected in all compartments. We could identify methane and oxygen gradients and physico-chemical parameters like pH, light, available copper and iron, and total dissolved nitrogen as important drivers of the MOB community structure. In addition, MOB were well-integrated into a bacterial-environmental network. Partial redundancy analysis of the relevance network of physico-chemical variables and bacteria explained up to 84% of the MOB abundances. Spatio-temporal MOB community changes were 51% congruent with shifts in the total bacterial community and 22% of variance in MOB abundances could be explained exclusively by the bacterial community composition. Our results show that microbial interactions may play an important role in structuring the MOB community along the depth gradient of stratified lakes.

Proteinaceous methanotrophs for feed additive using biowaste as carbon and nutrients source

To achieve a sustainable production of food and feed production, inexpensive carbon and nutrient sources are needed. In the present study, biologically upgraded biogas is coupled with electrochemically extracted nitrogen from digested biowaste to cultivate mixed methanotrophs as protein source. Results showed that an increase from less than 5 μgCu²⁺/L to 100 μgCu²⁺/L increased the biomass production by 41%. Microbial analysis revealed that the dominated Methylomonas spp. followed by Methylophilus spp. created a specialized community for high CH₄ assimilation. Moreover, duplicate semi-continuous fermenters run for 120 days validating the efficiency of alternative carbon and nitrogen feedstocks at long-term operation. As for dry cell weight (DCW) production, more than 2.5 g-DCW/L were produced using biologically upgraded biogas and electrochemically extracted nitrogen. Furthermore, the protein content and amino acid profile (>50% of DCW) demonstrated that the microbial biomass pose the characteristics to be used as animal feed additive.

Methane oxidising bacteria to upcycle effluent streams from anaerobic digestion of municipal biowaste

Conventional microbial protein production relies on the usage of pure chemicals and gases. Natural gas, which is a fossil resource, is the common input gas for bacterial protein production. Alternative sources for gas feedstock and nutrients can sufficiently decrease the operational cost and environmental impact of microbial protein production processes. In the present study, the effluents streams of municipal biowaste anaerobic digestion, were used to grow methane oxidising bacteria which can be used as protein source. Results demonstrated that a 40:60 CH₄:O₂ (v/v) gas feeding resulted in microbial biomass production of 0.95 g-DM/L by a Methylophilus dominated community. When raw biogas was used as input for methane corresponding to the same initial methane partial pressure as before, instead of pure methane, the growth was partially hindered (0.61 g-DM/L) due to the presence of H₂S (IC₅₀: 1376 ppm). Hence, desulfurization is suggested before using biogas for microbial protein production. At semi-continuous mode, results showed that the produced biomass had relatively high protein content (>40% of dry weight) and the essential amino acids lysine, valine, leucine and histidine were detected at high levels.

Ammonium influences kinetics and structure of methanotrophic consortia

The literature is conflicted on the influence of ammonium on the kinetics and microbial ecology of methanotrophy. In this study, methanotrophic cultures were enriched, under ammonium concentrations ranging from 0 to 200 mM, from an inoculum comprising leachate and top-cover soil from a landfill. Specific CH₄ biodegradation rates were highest (7.8 × 10^-4 ± 6.0 × 10^-5 gCH₄ g_X^-1 h^-1) in cultures enriched at 4 mM NH₄⁺, which were mainly dominated by type II methanotrophs belonging to Methylocystis spp. Lower specific CH₄ oxidation rates (average values of 1.8-3.6 × 10^-4 gCH₄ g_X^-1 h^-1) were achieved by cultures enriched at higher NH₄⁺ concentrations (20 and 80 mM), and had higher affinity for CH₄ compared to 4 mM enrichments. These lower affinities were attributed to lower diversity dominated by type I methanotrophs, of the Methylosarcina, Methylobacter and Methylomicrobium genera, encountered with increasing concentrations of NH₄⁺. The study indicates that CH₄ oxidation biotechnologies applied at low NH₄⁺ concentrations can support efficient abatement of CH₄ and high diversity of methanotrophic consortia, whilst enriching type II methanotrophs.

Aerobic methane oxidation under copper scarcity in a stratified lake

Aerobic methane-oxidizing bacteria (MOB) substantially reduce methane fluxes from freshwater sediments to the atmosphere. Their metalloenzyme methane monooxygenase (MMO) catalyses the first oxidation step converting methane to methanol. Its most prevalent form is the copper-dependent particulate pMMO, however, some MOB are also able to express the iron-containing, soluble sMMO under conditions of copper scarcity. So far, the link between copper availability in different forms and biological methane consumption in freshwater systems is poorly understood. Here, we present high-resolution profiles of MOB abundance and pMMO and sMMO functional genes in relation to copper, methane and oxygen profiles across the oxic-anoxic boundary of a stratified lake. We show that even at low nanomolar copper concentrations, MOB species containing the gene for pMMO expression are present at high abundance. The findings highlight the importance of copper as a micronutrient for MOB species and the potential usage of copper acquisition strategies, even under conditions of abundant iron, and shed light on the spatial distribution of these microorganisms.

Novel haloalkaliphilic methanotrophic bacteria: An attempt for enhancing methane bio-refinery

Methane bioconversion into products with a high market value, such as ectoine or hydroxyectoine, can be optimized via isolation of more efficient novel methanotrophic bacteria. The research here presented focused on the enrichment of methanotrophic consortia able to co-produce different ectoines during CH₄ metabolism. Four different enrichments (Cow3, Slu3, Cow6 and Slu6) were carried out in basal media supplemented with 3 and 6% NaCl, and using methane as the sole carbon and energy source. The highest ectoine accumulation (∼20 mg ectoine g biomass^-1) was recorded in the two consortia enriched at 6% NaCl (Cow6 and Slu6). Moreover, hydroxyectoine was detected for the first time using methane as a feedstock in Cow6 and Slu6 (∼5 mg g biomass^-1). The majority of the haloalkaliphilic bacteria identified by 16S rRNA community profiling in both consortia have not been previously described as methanotrophs. From these enrichments, two novel strains (representing novel species) capable of using methane as the sole carbon and energy source were isolated: Alishewanella sp. strain RM1 and Halomonas sp. strain PGE1. Halomonas sp. strain PGE1 showed higher ectoine yields (70-92 mg ectoine g biomass^-1) than those previously described for other methanotrophs under continuous cultivation mode (∼37-70 mg ectoine g biomass^-1). The results here obtained highlight the potential of isolating novel methanotrophs in order to boost the competitiveness of industrial CH₄-based ectoine production.

Copper (II) addition to accelerate lactic acid production from co-fermentation of food waste and waste activated sludge: Understanding of the corresponding metabolisms, microbial community and predictive functional profiling

Bio-refinery of food waste and waste activated sludge to high value-added chemicals, such as lactic acid, has attracted particular interest in recent years. In this paper, the effect of copper (II) dosing to the organic waste fermentation system on lactic acid production was evaluated, which proved to be a promising method to stimulate high yield of lactic acid (77.0% higher than blank) at dosage of 15 μM-Cu²⁺/g VSS. As mechanism study suggested, copper addition enhanced the activity of α-glycosidase and glycolysis, which increased the substrate for subsequent acidification; whereas, the high dosage (70 μM-Cu²⁺/g VSS) inhibited the conversion of lactic acid to VFA, thus stabilized lactic acid concentration. Microbial community study revealed that small amount of copper (II) at 15 μM/g VSS resulted in the proliferation of Lactobacillus to 82.6%, which mainly produced lactic acid. Finally, the variation of functional capabilities implied that the proposed homeostatic system II was activated at relatively low concentration of copper. Meanwhile, membrane transport function and carbohydrate metabolism were also strengthened. This study provides insights into the effect of copper (II) on the enhancement of lactic acid production from co-fermentation of food waste and waste activated sludge.

Enrichments of methanotrophic-heterotrophic cultures with high poly-β-hydroxybutyrate (PHB) accumulation capacities

Methanotrophic-heterotrophic communities were selectively enriched from sewage sludge to obtain a mixed culture with high levels of poly-β-hydroxybutyrate (PHB) accumulation capacity from methane. Methane was used as the carbon source, N₂ as sole nitrogen source, and oxygen and Cu content were varied. Copper proved essential for PHB synthesis. All cultures enriched with Cu could accumulate high content of PHB (43.2%-45.9%), while only small amounts of PHB were accumulated by cultures enriched without Cu (11.9%-17.5%). Batch assays revealed that communities grown with Cu and a higher O₂ content synthesized more PHB, which had a wider optimal CH₄:O₂ range and produced a high PHB content (48.7%) even though in the presence of N₂. In all methanotrophic-heterotrophic communities, both methanotrophic and heterotrophic populations showed the ability to accumulate PHB. Although methane was added as the sole carbon source, heterotrophs dominated with abundances between 77.2% and 85.6%. All methanotrophs detected belonged to type II genera, which formed stable communities with heterotrophs of different PHB production capacities.

Effects of copper on expression of methane monooxygenases, trichloroethylene degradation, and community structure in methanotrophic consortia

Copper plays a key role in regulating the expression of enzymes that promote biodegradation of contaminants in methanotrophic consortia (MC). Here, we utilized MC isolated from landfill cover to investigate cometabolic degradation of trichloroethylene (TCE) at nine different copper (Cu²⁺) concentrations. The results demonstrated that an increase in Cu²⁺ concentration from 0 to 15 μM altered the specific first-order rate constant k _1,TCE, the expression levels of methane monooxygenase (pmoA and mmoX) genes, and the specific activity of soluble methane monooxygenase (sMMO). High efficiency TCE degradation (95%) and the expression levels of methane monooxygenase (MMO) were detected at a Cu²⁺ concentration of 0.03 μM. Notably, sMMO-specific activity ranged from 74.41 nmol/(mg_cell h) in 15 μM Cu²⁺ to 654.99 nmol/(mg_cell h) in 0.03 μM Cu²⁺, which contrasts with cultures of pure methanotrophs in which sMMO activity is depressed at high Cu²⁺ concentrations, indicating a special regulatory role for Cu²⁺ in MC. The results of MiSeq pyrosequencing indicated that higher Cu²⁺ concentrations stimulated the growth of methanotrophic microorganisms in MC. These findings have important implications for the elucidation of copper-mediated regulatory mechanisms in MC.