Facile synthesis of Ag-modified manganese oxide for effective catalytic ozone decomposition

Novel Electrolytic Regeneration Method for Cyclic Regeneration of Ozone Decomposition MnOx Catalysts

The deactivation of ozone decomposition catalysts has been a bottleneck in their industrial application. As an efficient catalyst regeneration method, the liquid-phase method has attracted wide attention due to its operability and universality. However, the amount of waste liquid generated by the used regeneration liquid is a major drawback of its application. Therefore, we propose an electrolytic regeneration method for cyclic regeneration of MnOx ozone decomposition catalysts by combining the advantages of the electrolytic process. In this method, NaNO2 solution is used to react with O22- to efficiently regenerate the inactivated MnOx catalysts, while NO2- is oxidized to NO3-, and then the oxidized NO3- can be efficiently reduced to NO2- through the electrolysis process at the cathode with an 88% Faraday efficiency, ultimately realizing the recycling of the NO2-/NO3- regeneration solution. By this method, the regeneration of inactivated MnOx ozone catalysts can be realized only using electricity.

Synthesis Ag-Hollandite by mild route for highly efficient ozone decomposition

Catalytic ozone (O3) decomposition is a promising technology for curbing indoor O3 pollution, whereas its application is limited by the stability and moisture resistance of heterogeneous catalysts. Ag-Hollandite is a capable solution, but its facile synthesis still lacks systematic investigation. In this study, Ag-Hollandite catalysts were prepared using AgMnO4 as the precursor by reflux (AMO-Re), hydrothermal (AMO-HT), and homogeneous (AMO-HR) methods, respectively. The as-prepared samples showed excellent stability under moisture conditions, with the optimal one maintaining an O3 conversion rate of 99.19 % after 100 h. In the characterization results, Ramsdellite (R-MnO2) was identified as an intermediate species in the synthesis. AMO-HR exhibits higher activity due to enhanced active site exposure and weakened adsorption towards *OO species, while reduced surface hydroxyl content was a crucial factor for moisture resistance. This study aims to contribute insights for preparing catalysts by a facile method.

Effect of Interlayer Anions on NiFe Layered Double Hydroxides for Catalytic Ozone Decomposition

NiFe layered double hydroxides (NiFe-LDH) exhibited an outstanding performance and promising application potential for removing ozone. However, the effect of interlayer anions on ozone removal remains ambiguous. Here, a series of NiFe-LDH with different interlayer anions (F-, Cl-, Br-, NO3-, CO32-, and SO42-) were prepared to investigate the effect of the interlayer anion on ozone removal for the first time. It was found that the interlayer anions are a key factor affecting the water resistance of the NiFe-LDH catalyst under moist conditions. NiFe-LDH-CO32- exhibited the best water resistance, which was much better than that of NiFe-LDH containing other interlayer anions. The in situ DIRFTS demonstrates that the carbonates in the interlayer of NiFe-LDH-CO32- will undergo coordination changes through the interaction with water molecules under moist conditions, exposing new metal sites. As a result, the newly exposed metal sites could activate water molecules into hydroxyl groups that act as active sites for catalyzing ozone decomposition. This work provides a new insight into the interlayer anions of LDH, which is important for the design and development of LDH catalysts with excellent ozone removal properties.

Enhanced water resistance mechanism in Ag-Hollandite for catalytic ozone decomposition

Catalytic ozone (O3) decomposition at ambient temperature is an efficient method to mitigate O3 pollution. However, practical application is hindered by the poor water resistance of catalysts. Herein, Ag-Hollandite (Ag-HMO) with varying Ag+ content was synthesized. Catalysts with more Ag+ exhibited improved efficiency and water-resistance, with the optimal one maintaining 98% O3 conversion at 70% relative humidity (RH) within 8 h. Physicochemical characterizations revealed that Ag+ had entered the tunnel of OMS-2, facilitating oxygen species removal. Notably, enhanced H2O desorption and the complete inhibition of chemisorbed water formation on Ag-HMO were the primary reasons for its high-efficiency O3 conversion across a wide humidity range. The underlying mechanism arises from the charge redistribution induced by the Ag-O interaction within the tunnel, which reduces acidity and modulates hydrophilicity. This study aims to contribute insights for designing catalysts with higher water-resistance.

Rapid Ozone Decomposition over Water-activated Monolithic MoO3 /Graphdiyne Nanowalls under High Humidity

Catalytic ozone (O3 ) decomposition at high relative humidity (RH) remains a great challenge due to the catalysts poison and deactivation under high humidity. Here, we firstly elaborate the role of water activation and the corresponding mechanism of the promoted O3 decomposition over the three-dimensional monolithic molybdenum oxide/graphdiyne (MoO3 /GDY) catalyst. The O3 decomposition over MoO3 /GDY reaches up to 100 % under high humid condition (75 % RH) at room temperature, which is 4.0 times as high as that of dry conditions, significantly surpasses other carbon-based MoO3 materials(≤7.1 %). The sp-hybridized carbon in GDY donates electrons to MoO3 along the C-O-Mo bond, facilitating water activation to form hydroxyl species. As a result, hydroxyl species dissociated from water act as new active sites, promoting the adsorption of O3 and the generation of new intermediate species (hydroxyl ⋅OH and superoxo ⋅O2 - ), which significantly lowers the energy barriers of O3 decomposition (0.57 eV lower than dry conditions).

Heterojunctioned CuO/Cu2O catalyst for highly efficient ozone removal

In recent years, near surface ozone pollution, has attracted more and more attention, which necessitates the development of high efficient and low cost catalysts. In this work, CuO/Cu₂O heterojunctioned catalyst is fabricated by heating Cu₂O at high temperature, and is adopted as ozone decomposition catalyst. The results show that after Cu₂O is heated at 180°C conversion of ozone increases from 75.2% to 89.3% at mass space velocity 1,920,000 cm³/(g·hr) in dry air with 1000 ppmV ozone, which indicates that this heterojunction catalyst is one of the most efficient catalysts reported at present. Catalysts are characterized by electron paramagnetic resonance spectroscopy and ultraviolet photoelectron spectroscopy, which confirmed that the heterojunction promotes the electron transfer in the catalytic process and creates more defects and oxygen vacancies in the CuO/Cu₂O interfaces. This procedure of manufacturing heterostructures would also be applicable to other metal oxide catalysts, and it is expected to be more widely applied to the synthesis of high-efficiency heterostructured catalysts in the future.

Enhanced water-resistance of Mn-based catalysts for ambient temperature ozone elimination: Roles of N and Pd modification

Cryptomelane-type MnO₂ catalysts own excellent ozone (O₃) decomposition performance. However, it is urgent to improve their long-term stability at ambient temperature, especially under the presence of water. In the present study, a modification strategy was proposed by N-doping and the successive Pd introduction. The N-doping of MnO₂ by NH₄Cl (NH₄-MnO₂) can increase its activity for O₃ decomposition. And almost 100% O₃ decomposition was achieved within 24 h under water-free atmosphere at ambient temperature (25 °C). Successive Pd addition further promoted the water-resistance of NH₄-MnO₂ catalyst under high humidity (RH > 90%). In combination with detailed characterizations, it indicated that the enhancements on stability and water-resistance were attributed to synergistic effect among acid sites, oxygen defects and Pd clusters. Finally, the decomposition mechanism of gaseous O₃ was proposed based on three decisive active sites above.

Exploring an electric-aid ozone decomposition mode to enhance water resistance over manganese oxide monolith catalyst under high humidity

In this work, a facile, green, and effective reaction mode of electric-aid ozone decomposition (EAOD) was developed over a manganese-based monolith catalyst for eliminating ozone under high humidity. The catalyst was prepared by directly growing α-MnO₂ nanorods on Al honeycomb substrate (MnO₂/Al) via a simple hydrothermal process, and the EAOD mode was performed just by connecting the MnO₂/Al monolith catalyst with a DC power supply during ozone decomposition reaction. In the EAOD mode reaction, the MnO₂/Al catalyst exhibited a stable ozone conversion efficiency of over 82 % and excellent stability over 720 min under a relative humidity of 90%, well beyond the performance of catalyst in the conventional ozone decomposition reaction without the help of electric aid. Here, the water evaporation by the external electric field generated from the EAOD mode hinders the competitive adsorption of water vapor on the active sites of MnO₂/Al catalyst, consequently enhances its water resistance. Moreover, increasing input electric current of the DC power supply could further improve the catalytic activity and stability of the monolith catalyst for ozone decomposition in EAOD mode reaction.

Engineering a Novel AgMn2O4@Na0.55Mn2O4 Nanosheet toward High-Performance Electrochemical Capacitors

Manganese oxides, as a type of two-dimensional (2D) material with high specific area and low cost, are considered promising energy storage materials. Here, we report novel AgMn2O4/Na0.55Mn2O4 nanosheets created by a popular liquid precipitation method with different AgNO3 contents, and their corresponding physical and electrochemical characterizations are performed. The results show that the ultra-thin Na0.55Mn2O4 nanosheets were combined with the AgMn2O4 nanoparticles and an enhancement in their specific capacity was observed compared to the pristine sheets. This electrode material displays a peak specific capacitance of 335.94 F g−1 at 1 A g−1. Using an asymmetric supercapacitor (ASC) assembled using a positive electrode made of AgMn2O4/Na0.55Mn2O4 nanosheets and a reduced graphene oxide (rGO) negative electrode, a high energy density of 65.5 Wh kg−1 was achieved for a power density of 775 W kg−1. The ASC showed good cycling stability with a capacitance value maintained at 90.2% after 10000 charge/discharge cycles. The excellent electrochemical performance of the device was ascribed to the heterostructures and the open space formed by the interconnected manganese oxide nanosheets, which resulted in a rapid and reversible faraday reaction in the interface and further enhanced its electrochemical kinetics.

Layered Double Hydroxide Catalysts for Ozone Decomposition: The Synergic Role of M2+ and M3

In previous work, we successfully prepared a NiFe-layered double hydroxide (LDH) with superior activity and stability for catalytic ozone decomposition, which fundamentally avoids deactivation under high-humidity conditions. However, the role of the metal elements (M²⁺ and M³⁺) in LDH catalysts is not clear. Here, LDH materials containing different metals (NiFe, NiAl, NiMn, CoFe, and MgFe) were prepared by a simple co-precipitation method. It was found that the LDHs containing Ni²⁺ exhibited catalytic performance far superior to that of Co²⁺ and Mg²⁺ for ozone elimination, and NiFe-LDH had the best activity and stability among LDH materials prepared in this study. The NiFe-LDH can maintain 78% catalytic activity within 144 h at room temperature, even under a relative humidity of 65% and a space velocity of 840 L·g^-1·h^-1. Physicochemical characterizations demonstrated that chemical stability in an oxidizing atmosphere and the synergic role of M²⁺ and M³⁺ ions are crucial. The result of density functional theory calculation showed that the synergic role of Ni²⁺ and Fe³⁺ weakens the interaction between O and H in the O-H bond, which effectively lowers the reaction barrier of ozone decomposition compared with MgFe-LDH.

Boosting the Dispersity of Metallic Ag Nanoparticles and Ozone Decomposition Performance of Ag-Mn Catalysts via Manganese Vacancy-Dependent Metal-Support Interactions

Ozone (O₃) removal has important implications for environmental protection and human health, and Ag-Mn catalysts have shown promising O₃ decomposition. Catalysts with Ag supported on porous cube-like α-Mn₂O₃ (Ag/Mn-C) with high utilization of Ag were prepared by the impregnation method and showed excellent O₃ decomposition activity. Physicochemical characterizations demonstrated that metallic Ag nanoparticles (Ag_n⁰) were mainly anchored on manganese vacancies, forming Ag-O-Mn bonds between Ag_n⁰ and α-Mn₂O₃-C. The abundant manganese vacancies of α-Mn₂O₃-C can lead to Ag_n⁰ with a smaller particle size and more uniform dispersion, thereby resulting in markedly enhanced O₃ decomposition performance compared to Ag_n⁰ with a large particle size and uneven distribution on rod-like α-Mn₂O₃ (Ag/Mn-R). Under a relative humidity of 65% and a space velocity of 1,110,000 h^-1, the conversion of 40 ppm O₃ over the 2%Ag/Mn-C catalyst within 6 h (98%) at 30 °C was more than twice as high as that of the 2%Ag/Mn-R catalyst (42%). The study provides guidance for the design of highly efficient Ag-based catalysts and the understanding of the microstructure of supported catalysts.

Terminal Hydroxyl Groups on Al2O3 Supports Influence the Valence State and Dispersity of Ag Nanoparticles: Implications for Ozone Decomposition

Ozone is a poisonous gas, so it is necessary to remove excessive ozone in the environment. Catalytic decomposition is an effective way to remove ozone at room temperature. In this work, 10%Ag/nano-Al₂O₃ and 10%Ag/AlOOH-900 catalysts were synthesized by the impregnation method. The 10%Ag/nano-Al₂O₃ catalyst showed 89% ozone conversion for 40 ppm O₃ for 6 h under a space velocity of 840 000 h^-1 and a relative humidity of 65%, which is superior to 10%Ag/AlOOH-900 (45% conversion). The characterization results showed Ag nanoparticles to be the active sites for ozone decomposition, which were more highly dispersed on nano-Al₂O₃ as a result of the greater density of terminal hydroxyl groups. The understanding of the dispersion and valence of silver species gained in this study will be beneficial to the design of more efficient supported silver catalysts for ozone decomposition in the future.

Exploring an efficient manganese oxide catalyst for ozone decomposition and its deactivation induced by water vapor

A series of MnO_x catalysts supported by carbon spheres were prepared by calcining mixtures of manganese acetate and carbon spheres under a nitrogen atmosphere, and their performance for ozone decomposition under high humidity conditions (RH = 90%) was evaluated.

Tuning the Chemical State of Silver on Ag-Mn Catalysts to Enhance the Ozone Decomposition Performance

Ag-Mn catalysts with excellent water resistance and ozone decomposition activity were successfully synthesized by simple precipitation and impregnation methods. Under a relative humidity of 65% and space velocity of 840,000 h^-1, the 6%Ag/α-Mn₂O₃-I catalyst showed 99% conversion of 40 ppm O₃ after 6 h, which was far superior to the performance of the 6%AgMnO_x-C (49%), 6%Ag/MnCO₃-I (32%), and α-Mn₂O₃ (5%) catalysts. Physicochemical characterization indicated that the chemical state of Ag on the Ag-Mn catalysts determined the O₃ decomposition activity of the catalysts. The Ag species on the 6%Ag/α-Mn₂O₃-I catalyst were mainly metallic silver nanoparticles (Ag_n⁰), which exhibited much better ozone decomposition performance than the Ag_1.8Mn₈O₁₆ and oxidized silver clusters (Ag_n^δ+) existing on the 6%Ag/MnCO₃-I and 6%AgMnO_x-C catalysts. The 6%Ag/α-Mn₂O₃-I catalyst still had above 85% ozone conversion after 60 h under a relative humidity of 65% and space velocity of 840,000 h^-1. The slight deactivation of the catalyst was ascribed to the oxidation of Ag_n⁰, and its activity could be completely recovered by treatment at 350 °C under an N₂ atmosphere, which indicated that it is a promising catalyst for ozone decomposition. This research provides guidance for the subsequent development of Ag-Mn catalysts for ozone decomposition with high activity.

Recent advances in catalytic decomposition of ozone

Ozone (O₃), as a harmful air pollutant, has been of wide concern. Safe, efficient, and economical O₃ removal methods urgently need to be developed. Catalytic decomposition is the most promising method for O₃ removal, especially at room temperature or even subzero temperatures. Great efforts have been made to develop high-efficiency catalysts for O₃ decomposition that can operate at low temperatures, high space velocity and high humidity. First, this review describes the general reaction mechanism of O₃ decomposition on noble metal and transition metal oxide catalysts. Then, progress on the O₃ decomposition performance of various catalysts in the past 30 years is summarized in detail. The main focus is the O₃ decomposition performance of manganese oxides, which are divided into supported manganese oxides and non-supported manganese oxides. Methods to improve the activity, stability, and humidity resistance of manganese oxide catalysts for O₃ decomposition are also summarized. The deactivation mechanisms of manganese oxides under dry and humid conditions are discussed. The O₃ decomposition performance of monolithic catalysts is also summarized from the perspective of industrial applications. Finally, the future development directions and prospects of O₃ catalytic decomposition technology are put forward.

Detrimental role of residual surface acid ions on ozone decomposition over Ce-modified γ-MnO2 under humid conditions

In the study, the catalyst precursors of Ce-modified γ-MnO₂ were washed with deionized water until the pH value of the supernatant was 1, 2, 4 and 7, and the obtained catalysts were named accordingly. Under space velocity of 300,000 hr^-1, the ozone conversion over the pH = 7 catalyst under dry conditions and relative humidity of 65% over a period of 6 hr was 100% and 96%, respectively. However, the ozone decomposition activity of the pH = 2 and 4 catalysts distinctly decreased under relative humidity of 65% compared to that under dry conditions. Detailed physical and chemical characterization demonstrated that the residual sulfate ions on the pH = 2 and 4 catalysts decreased their hydrophobicity and then restrained humid ozone decomposition activity. The pH = 2 and 4 catalysts had inferior resistance to high space velocity under dry conditions, because the residual sulfate ion on their surface reduced their adsorption capacity for ozone molecules and increased their apparent activation energies, which was proved by temperature programmed desorption of O₂ and kinetic experiments. Long-term activity testing, X-ray photoelectron spectroscopy and density functional theory calculations revealed that there were two kinds of oxygen vacancies on the manganese dioxide catalysts, one of which more easily adsorbed oxygen species and then became deactivated. This study revealed the detrimental effect of surface acid ions on the activity of catalysts under humid and dry atmospheres, and provided guidance for the development of highly efficient catalysts for ozone decomposition.

Porous manganese oxides synthesized with natural products at room temperature: a superior humidity-tolerant catalyst for ozone decomposition

Porous cerium-doped manganese oxides have been facilely synthesized with dopamine and exhibit prominent activity and humidity tolerance for O₃ decomposition.

Unravelling the efficient catalytic performance of ozone decomposition over nitrogen-doped manganese oxide catalysts under high humidity

Nitrogen-doped Mn species, coated with a carbon layer of several nanometers in thickness, for enhanced water vapor resistance.