Photocatalytic degradation kinetics and mechanism of antivirus drug-lamivudine in TiO2 dispersion

Mechanisms in the photocatalytic breakdown of persistent pharmaceutical and pesticide molecules over TiO2-based photocatalysts: A review

Titanium dioxide (TiO2) based photocatalysts have been widely used as a photocatalyst for the degradation of various persistent organic compounds in water and air. The degradation mechanism involves the generation of highly reactive oxygen species, such as hydroxyl radicals, which react with organic compounds to break down their chemical bonds and ultimately mineralize them into harmless products. In the case of pharmaceutical and pesticide molecules, TiO2and modified TiO2photocatalysis effectively degrade a wide range of compounds, including antibiotics, pesticides, and herbicides. The main downside is the production of dangerous intermediate products, which are not frequently addressed in the literature that is currently available. The degradation rate of these compounds by TiO2photocatalysis depends on factors such as the chemical structure of the compounds, the concentration of the TiO2catalyst, the intensity, the light source, and the presence of other organic or inorganic species in the solution. The comprehension of the degradation mechanism is explored to gain insights into the intermediates. Additionally, the utilization of response surface methodology is addressed, offering a potential avenue for enhancing the scalability of the reactors. Overall, TiO2photocatalysis is a promising technology for the treatment of pharmaceutical and agrochemical wastewater, but further research is needed to optimize the process conditions and to understand the fate and toxicity of the degradation products.

Examining the Association between Abstinence from Smoking and Healthcare Costs among Patients with Cancer

Continuous tobacco use in patients with cancer is linked to substantial healthcare costs due to increased risks and complications, whereas quitting smoking leads to improved treatment outcomes and cost reductions. Addressing the need for empirical evidence on the economic impact of smoking cessation, this study examined the association between smoking cessation and healthcare cost utilization among a sample of 930 patients with cancer treated at The University of Texas MD Anderson Cancer Center's Tobacco Research and Treatment Program (TRTP). Applying conditional quantile regression and propensity scores to address confounding, our findings revealed that abstinence achieved through the TRTP significantly reduced the median cost during a 3-month period post-quitting by $1,095 [β = -$1,095, P = 0.007, 95% confidence interval (CI), = (-$1,886 to -$304)]. Sensitivity analysis corroborated these conclusions, showing a pronounced cost reduction when outlier data were excluded. The long-term accrued cost savings from smoking cessation could potentially offset the cost of participation in the TRTP program, underscoring its cost effectiveness. An important implication of this study is that by reducing smoking rates, healthcare systems can more efficiently allocate resources, enhance patient health outcomes, and lessen the overall cancer burden.

PREVENTION RELEVANCE

This study emphasizes the dual impact of smoking cessation programs in patients with cancer: quitting smoking and reducing healthcare costs. It highlights the importance of integrating cessation programs into cancer prevention strategies, ensuring both individual health benefits and broader, system-wide economic efficiencies. See related Spotlight, p. 197.

Recent Developments in Semiconductor-Based Photocatalytic Degradation of Antiviral Drug Pollutants

The prevalence of antiviral drugs (ATVs) has seen a substantial increase in response to the COVID-19 pandemic, leading to heightened concentrations of these pharmaceuticals in wastewater systems. The hydrophilic nature of ATVs has been identified as a significant factor contributing to the low degradation efficiency observed in wastewater treatment plants. This characteristic often necessitates the implementation of additional treatment steps to achieve the complete degradation of ATVs. Semiconductor-based photocatalysis has garnered considerable attention due to its promising potential in achieving efficient degradation rates and subsequent mineralization of pollutants, leveraging the inexhaustible energy of sunlight. However, in recent years, there have been few comprehensive reports that have thoroughly summarized and analyzed the application of photocatalysis for the removal of ATVs. This review commences by summarizing the types and occurrence of ATVs. Furthermore, it places a significant emphasis on delivering a comprehensive summary and analysis of the characteristics pertaining to the photocatalytic elimination of ATVs, utilizing semiconductor photocatalysts such as metal oxides, doped metal oxides, and heterojunctions. Ultimately, the review sheds light on the identified research gaps and key concerns, offering invaluable insights to steer future investigations in this field.

Boosted visible-light-driven degradation over stable ternary heterojunction as a plasmonic photocatalyst: Mechanism exploration, pathway and toxicity evaluation

The incorporation of plasmonic metals into semiconductors forming heterojunction photocatalysts is a promising route to enhance the photocatalytic performance in visible light. In this work, we reported the visible-light-driven one-dimensional (1D) nanostick silver/silver sulfide (Ag/Ag₂S) photocatalyst combining with two-dimensional (2D) nanosheet reduced graphene oxide intersected by hollow structure (h-RGO) was prepared via a feasible approach at room temperature. The density of Ag depositing on the surface of Ag₂S was easily tuned by the concentration of sodium borohydride and the silicon dioxide nanospheres were employed as templates in the preparation of h-RGO by the layer-by-layer (LBL) assembly. The ternary plasmonic Ag/Ag₂S/h-RGO photocatalysts exhibited better photocatalytic performance for degradation of naphthalene (95.95%) and 1-naphthol (98.65%) under visible light than the pure Ag₂S, composite Ag/Ag₂S and composite Ag/Ag₂S/RGO. Localized surface plasmon resonance of Ag, heterojunction formed between Ag/Ag₂S and RGO and the unique characteristics of h-RGO, which included higher specific surface areas, more efficient reflections of light and more active sites than RGO for boosting separation efficiency of charge carriers, were all responsible for such enhancement. By combining the characterization results with various computations, the mechanism, potential degradation pathways and the toxicity of the generated intermediates for photodegradation were examined. In addition to offering profound insight into the expansion of effective plasmonic photocatalysts with novel structures, the current study is beneficial to ease the environmental crisis to a certain extent.

A sustainable approach for the removal methods and analytical determination methods of antiviral drugs from water/wastewater: A review

In the last years, antiviral drugs especially used for the treatment of COVID-19 have been considered emerging contaminants because of their continuous occurrence and persistence in water/wastewater even at low concentrations. Furthermore, as compared to antiviral drugs, their metabolites and transformation products of these pharmaceuticals are more persistent in the environment. They have been found in environmental matrices all over the world, demonstrating that conventional treatment technologies are unsuccessful for removing them from water/wastewater. Several approaches for degrading/removing antiviral drugs have been studied to avoid this contamination. In this study, the present level of knowledge on the input sources, occurrence, determination methods and, especially, the degradation and removal methods of antiviral drugs are discussed in water/wastewater. Different removal methods, such as conventional treatment methods (i.e. activated sludge), advanced oxidation processes (AOPs), adsorption, membrane processes, and combined processes, were evaluated. In addition, the antiviral drugs and these metabolites, as well as the transformation products created as a result of treatment, were examined. Future perspectives for removing antiviral drugs, their metabolites, and transformation products were also considered.

SARS-CoV-2 pharmaceutical drugs: a critical review on the environmental impacts, chemical characteristics, and behavior of advanced oxidation processes in water

This review summarizes research data on the pharmaceutical drugs used to treat the novel SARS-CoV-2 virus, their characteristics, environmental impacts, and the advanced oxidation processes (AOP) applied to remove them. A literature survey was conducted using the electronic databases Science Direct, Scopus, Taylor & Francis, Google Scholar, PubMed, and Springer. This complete research includes and discusses relevant studies that involve the introduction, pharmaceutical drugs used in the SARS-CoV-2 pandemic: chemical characteristics and environmental impact, advanced oxidation process (AOP), future trends and discussion, and conclusions. The results show a full approach in the versatility of AOPs as a promising solution to minimize the environmental impact associated with these compounds by the fact that they offer different ways for hydroxyl radical production. Moreover, this article focuses on introducing the fundamentals of each AOP, the main parameters involved, and the concomitance with other sources and modifications over the years. Photocatalysis, sonochemical technologies, electro-oxidation, photolysis, Fenton reaction, ozone, and sulfate radical AOP have been used to mineralize SARS-CoV-2 pharmaceutical compounds, and the efficiencies are greater than 65%. According to the results, photocatalysis is the main technology currently applied to remove these pharmaceuticals. This process has garnered attention because solar energy can be directly utilized; however, low photocatalytic efficiencies and high costs in large-scale practical applications limit its use. Furthermore, pharmaceuticals in the environment are diverse and complex. Finally, the review also provides ideas for further research needs and major concerns.

Detoxifying SARS-CoV-2 antiviral drugs from model and real wastewaters by industrial waste-derived multiphase photocatalysts

The use of antiviral drugs has surged as a result of the COVID-19 pandemic, resulting in higher concentrations of these pharmaceuticals in wastewater. The degradation efficiency of antiviral drugs in wastewater treatment plants has been reported to be too low due to their hydrophilic nature, and an additional procedure is usually necessary to degrade them completely. Photocatalysis is regarded as one of the most effective processes to degrade antiviral drugs. The present study aims at synthesizing multiphase photocatalysts by a simple calcination of industrial waste from ammonium molybdate production (WU photocatalysts) and its combination with WO₃ (WW photocatalysts). The X-ray diffraction (XRD) results confirm that the presence of multiple crystalline phases in the synthesized photocatalysts. UV-Vis diffuse reflectance spectra reveal that the synthesized multiphase photocatalysts absorb visible light up to 620 nm. Effects of calcination temperature of industrial waste (550-950 °C) and WO₃ content (0-100%) on photocatalytic activity of multiphase photocatalysts (WU and WW) for efficient removal of SARS-CoV-2 antiviral drugs (lopinavir and ritonavir) in model and real wastewaters are studied. The highest k₁ value is observed for the photocatalytic removal of ritonavir from model wastewater using WW4 (35.64 ×10^-2 min^-1). The multiphase photocatalysts exhibit 95% efficiency in the photocatalytic removal of ritonavir within 15 of visible light irradiation. In contrast, 60 min of visible light irradiation is necessary to achieve 95% efficiency in the photocatalytic removal of lopinavir. The ecotoxicity test using zebrafish (Danio rerio) embryos shows no toxicity for photocatalytically treated ritonavir-containing wastewater, and the contrary trend is observed for photocatalytically treated lopinavir-containing wastewater. The synthesized multiphase photocatalysts can be tested and applied for efficient degradation of other SARS-CoV-2 antiviral drugs in wastewater in the future.

Bioremediation and decontamination potentials of metallic nanoparticles loaded nanohybrid matrices - A review

The current nanotechnological advancements provide an astonishing insight to fabricate nanomaterials for nano-bioremediation purposes. Exciting characteristics possessed by hybrid matrices at the nanoscale knock endless opportunities to nano-remediate environmentally-related pollunanomaterials tants of emerging concern. Nanometals are considered among the oldest generation of the world has ever noticed. These tiny nanometals and nanometal oxides showed enormous potential in almost every extent of industrial and biotechnological domains, including their potential multipurpose approach to deal with water impurities. In this manuscript, we discussed their role in the diversity of water treatment technologies used to remove bacteria, viruses, heavy metals, pesticides, and organic impurities, providing an ample perspective on their recent advances in terms of their characteristics, attachment strategies, performance, and their scale-up challenges. Finally, we tried to explore their futuristic contribution to nano-remediate environmentally-related pollutants of emerging concern aiming to collect treated yet safe water that can be reused for multipurpose.

Antiretroviral Drugs in African Surface Waters: Prevalence, Analysis, and Potential Remediation

The sources, ecotoxicological impact, and potential remediation strategies of antiretroviral drugs (ARVDs) as emerging contaminants in surface waters are reviewed based on recent literature. The occurrence of ARVDs in water bodies raises concern because many communities in Africa depend on rivers for water resources. Southern Africa is a potential hotspot regarding ARVD contamination due to relatively high therapeutic application and detection thereof in water bodies. Efavirenz and nevirapine are the most persistent in effluents and are prevalent in surface water based on environmental concentrations. Whereas the highest concentration of efavirenz reported in Kenya was 12.4 µg L^-1 , concentrations as high as 119 and 140 µg L^-1 have been reported in Zambia and South Africa, respectively. Concentrations of ARVDs ranging from 670 to 34 000 ng L^-1 (influents) and 540 to 34 000 ng L^-1 (effluents) were determined in wastewater treatment plants in South Africa, compared with Europe, where reported concentrations range from less than limit of detection (LOD) to 32 ng L^-1 (influents) and less than LOD to 22 ng L^-1 (effluents). The present African-based review suggests the need for comprehensive toxicological and risk assessment of these emerging pollutants in Africa, with the intent of averting environmental hazards and the development of sustainable remediation strategies. Environ Toxicol Chem 2022;41:247-262. © 2021 SETAC.

Algae-mediated processes for the treatment of antiretroviral drugs in wastewater: Prospects and challenges

The prevalence of pharmaceuticals (PCs), especially antiretroviral (ARV) drugs in various aquatic ecosystems has been expansively reported, wherein wastewater treatment plants (WWTPs) are identified as the primary point source. Consequently, the occurrence, ecotoxicity and treatment of ARV drugs in WWTPs have drawn much attention in recent years. Numerous studies have shown that the widely employed activated sludge-based WWTPs are incapable of removing ARV drugs efficiently from wastewater. Recently, algae-based wastewater treatment processes have shown promising results in PCs removal from wastewater, either completely or partially, through different processes such as biosorption, bioaccumulation, and intra-/inter-cellular degradation. Algal species have also shown to tolerate high concentrations of ARV drugs than the reported concentrations in the environmental matrices. In this review, emphasis has been given on discussing the current status of the occurrence of ARV drugs in the aquatic environment and WWTPs. Besides, the current trends and future perspectives of PCs removal by algae are critically reviewed and discussed. The potential pathways and mechanisms of ARV drugs removal by algae have also been discussed.

Predicting the trend and utility of different photocatalysts for degradation of pharmaceutically active compounds: A special emphasis on photocatalytic materials, modifications, and performance comparison

The rapid rise in the healthcare sector has led to an increase in pharmaceutically active compounds (PhACs) in different aqueous bodies. The toxicity of the PhACs and their ability to persist after conventional treatment processes have escalated research in the field of photocatalytic treatment. Although different photocatalysts have been successful in degrading PhACs, their inherent drawbacks have severely limited their application on a large scale. A substantial amount of research has been aimed at overcoming the high cost of the photocatalytic material, low quantum yield, the formation of toxic end products, etc. Hence, to further research in this field, researchers must have a fair idea of the current trends in the application of different photocatalysts. In this article, the trends in the use of various photocatalysts for the removal of different PhACs have been circumscribed. The performance of different groups of photocatalysts to degrade PhACs from synthetic and real wastewater has been addressed. The drawbacks and advantages of these materials have been compared, and their future in the field of PhACs removal has been predicted using S-curve analysis. Zinc and titanium-based photocatalysts were efficient under UV irradiation, while bismuth and graphene-based materials exhibited exemplary performance in visible light. However, iron-based compounds were found to have the most promising future, which may be because of their magnetic properties, easy availability, low bandgap, etc. Different modification techniques, such as morphology modification, doping, heterojunction formation, etc., have also been discussed. This study may help researchers to clarify the current research status in the field of photocatalytic treatment of PhACs and provide valuable information for future research.

Starch-based magnetic nanocomposite as an efficient absorbent for anticancer drug removal from aqueous solution

In this study, carboxymethyl cassava starch (CMCS)-functionalized magnetic nanoparticles (CMCS@Fe₃O₄) were synthesized via a simple one-pot co-precipitation method using CMCS materials with varying degrees of substitution, and used for the adsorption/removal of doxorubicin hydrochloride (Dox; a clinically available anti-cancer drug) from aqueous solution. The adsorption of Dox was studied using experimental conditions with varied pH, temperature, initial Dox concentration, and CMCS@Fe₃O₄ dosage. The CMCS@Fe₃O₄ adsorbents were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and vibrating sample magnetometry. Each CMCS@Fe₃O₄ adsorbent exhibited a cubic inverse spinel iron oxide phase, small particle size, favorable magnetic properties, and good thermal stability. Batch adsorption experiments showed that the Dox adsorption efficiency reached 85.46% at a CMCS@Fe₃O₄ concentration of 20 mg mL^-1 at 303 K in pH 7.0. The adsorption experimental results indicated that the adsorption kinetics followed a pseudo-second-order model and the Langmuir equation. Considering the environmentally nontoxic nature of Fe₃O₄ and starch, the CMCS@Fe₃O₄ material demonstrated significant potential for removing Dox from aqueous solution and in magnetic targeted drug delivery systems for synergistic tumor treatments.

Facile synthetic routes for photocatalytic Pb3(BTC)2·H2O coordination polymers

Herein, we report on the successful synthesis of photocatalytic Pb3(BTC)2·H2O polymers via different methods including the surfactant-assisted hydrothermal method, ultrasonic method and reflux method. As the crystal growth is subjected to preparation atmosphere, changes in reaction conditions do not alter the crystal structures of products, but vary their morphology. High ultraviolet-light-driven photocatalytic abilities are attributed to the stable Pb3(BTC)2·H2O, and the effective productions of h+ and ˙OH on the catalysts.

Prospects and challenges of photocatalysis for degradation and mineralization of antiviral drugs

Among the outbreak of influenza and other pandemics such as SARS-CoV-2 recently over the globe, antiviral drugs were significantly concerned with controlling the disease and these pandemics. They have been developed for seven decades around more than 90 drugs categorized licensed to treat nine human infectious diseases. Based on their functional group, antiviral compounds will mitigate infectivity and symptoms and reduce the illness period by arresting the viral replication cycle at different stages. Antiviral drugs have been developed complexly and met many biothreat challenges due to their high biosafety level requirement. In recent years, the spreading of novel virus strains that are a threat to human life, the development in researching and manufacturing new types of antiviral drugs increases and the use by patients and clinicians have increased. Antiviral compounds have been reported only partly removed during wastewater treatment. They were available in wastewater treatment plant effluents and found in surface water from rivers and streams, underground water, and even in drinking water. Photocatalytic degradation of antiviral drugs was exploding to clear the environmental waters from the antiviral drugs. The principle of photocatalysis is based on the excitation of the catalyst material by irradiation of light. The catalyst produces free radicals under the action of photons, which will destroy the pollutants adsorbed on its surface. The photocatalytic degradation mechanism of antiviral drugs can be understood through decomposing in a heterogeneous photocatalytic system and which species are involved in the active decomposition of the drug and then photocatalytically degrading into intermediates or mineralization products. The intermediates and the reaction pathway of antiviral compound photocatalytic degradation are complicated. However, some of the degradation processes are complete, and inorganic compounds (CO₂ and H₂O) are their final products.

AgI modified covalent organic frameworks for effective bacterial disinfection and organic pollutant degradation under visible light irradiation

Covalent organic frameworks (COFs) have recently been demonstrated to have great application potentials in water treatment. Their photocatalytic performance towards bacterial disinfection and organic pollutant degradation yet has seldom been investigated. In this study, AgI modified COFs (using 2,5-diaminopyridine and 1,3,5-triformylphloroglucinol as precursors) (COF-PD/AgI) were fabricated and their applications to photocatalytically disinfect bacteria and degrade organic pollutants were investigated. COF-PD/AgI exhibited effective photocatalytic performance towards Escherichia coli disinfection and organic pollutant (Rhodamine B and acetaminophen) degradation. SEM images were employed to investigate cell disinfection process, while theoretical density functional theory (DFT) calculation and intermediates determination were used to elucidate organic pollutant degradation processes. Scavenger experiments, ESR spectra and chemical probes experiments confirmed O₂^-, h⁺ and OH played important roles in the photocatalytic process. The formation of dual-band Z-scheme heterojunction improved photocatalytic performance. COF-PD/AgI remained high photocatalytic activity in the four consecutive cycles and could serve as a promising photocatalyst for water purification.

Photodegradation of polychlorinated diphenyl sulfides (PCDPSs) under simulated solar light irradiation: Kinetics, mechanism, and density functional theory calculations

The direct photolysis of 25 individual polychlorinated diphenyl sulfides (PCDPSs) substituted with 1-7 chlorine atoms was investigated using a 500-W Xe lamp. Photolysis of PCDPSs followed pseudo-first-order kinetics, with the higher chlorinated diphenyl sulfides generally degrading faster than the lower chlorinated congeners. A quantitative structure-activity relationship model to predict the photolysis rates of PCDPSs was developed using 16 fundamental quantum chemical descriptors. We found that the substitution pattern for chlorine atoms, the dipole moment, and E_LUMO - E_HOMO were major factors in the photolysis of PCPDSs. The reaction kinetics, products, and photodegradation pathways of 2,2',3',4,5-pentachlorodiphenyl sulfide (PeCDPS) suggest hydroxylation, direct photooxidation, the C-S bond cleavage reaction, and hydroxyl substitution were mainly involved in the photodegradation process, leading to the formation of 13 intermediates, detected by an electrospray time-of-flight mass spectrometer. The initial reaction sites of PCDPSs under photolysis were rationalized by density functional theory calculations. Anions (Cl^-, SO₄^2-, NO₃^-, and HCO₃^-) and Co²⁺ had no influence on the removal of PeCDPS, while Fe³⁺, Cu²⁺, and HA decreased the photolysis efficiency of PeCDPS. This report is the first to develop a logk quantitative structure-property relationships (QSPR) model of 25 PCDPSs and to describe mechanistic pathways for the photolysis of PeCDPS.

KMnO4-mediated reactions for hexachlorophene in aqueous solutions: Direct oxidation, self-coupling, and cross-coupling

Hexachlorophene (HCP) is used in a range of general cleaning and disinfecting products and has received increased attention due to its damaging effect to the central nervous system in animals and its toxicity in humans. The chemical oxidation of HCP by KMnO₄ was performed to systematically evaluate the effects of oxidant dose, pH, temperature, typical anions, humic acid (HA), and various matrices on HCP removal. The second-order rate constant for HCP was determined to be 4.83 × 10⁴ M^-1 s^-1 at pH 7.0 and 25 °C. The presence of HA can inhibit the removal of HCP by KMnO₄, while Cl^-, NO₃^-, SO₄^2-, PO₄^3-, and CO₃^2- have negligible effects. Degradation products analysis of the reaction, as well as theoretical calculations of HCP molecule and its phenoxy radical species, indicated that KMnO₄ oxidation for HCP included a C-C bridge bond cleavage, hydroxylation, direct oxidation and self-coupling, and cross-coupling reactions. This study revealed that KMnO₄ oxidation is an effective technique for eliminating HCP in real water and wastewater.

A generalized predictive model for TiO2-Catalyzed photo-degradation rate constants of water contaminants through artificial neural network

Titanium dioxide (TiO₂) is a well-known photocatalyst in the applications of water contaminant treatment. Traditionally, the kinetics of photo-degradation rates are obtained from experiments, which consumes enormous labor and experimental investments. Here, a generalized predictive model was developed for prediction of the photo-degradation rate constants of organic contaminants in the presence of TiO₂ nanoparticles and ultraviolet irradiation in aqueous solution. This model combines an artificial neural network (ANN) with a variety of factors that affect the photo-degradation performance, i.e., ultraviolet intensity, TiO₂ dosage, organic contaminant type and initial concentration in water, and initial pH of the solution. The molecular fingerprints (MF) were used to interpret the organic contaminants as binary vectors, a format that is machine-readable in computational linguistics. A dataset of 446 data points for training and testing was collected from the literature. This predictive model shows a good accuracy with a root mean square error (RMSE) of 0.173.

Insight into the removal process mechanism of pharmaceutical compounds and dyes on plasma-modified biomass: the key role of adsorbate specificity

The reason that some molecules, but not others, are easily adsorbed was not fully understood. In order to spotlight the effect of morphological structure and surface functional composition of adsorbate rather than focusing only on the nature of adsorbent as in most of literature reports, this work reports the biosorption of two dyes (anionic Orange G and cationic malachite green) and two pharmaceuticals (Ibuprofen and ampicillin) as target representative contaminants onto plasma-modified cocoa shell (CPHP) used as alternative low-cost adsorbent. As results, when molecules were mixed in solution and then exposed to a substrate, the factors that affect adsorption include the relative solvation of the adsorbates, the ability of each molecule to adhere to the surface, and the degree of interaction between the molecules once they were adsorbed. The maximum adsorbed amounts at 298 K of OG, MG, IBP, and AMP were 23.96, 14.65, 13.99, and 06.66 mg/g, respectively. The most solvated molecules may not adsorb rapidly to the surface, while comparatively, the less soluble molecules will aggregate, so as to maximize self-interactions via Van der Waals, hydrogen bonds or other interactions. This work demonstrated that the adsorbate intrinsic properties could play a significant role in the adsorption process. Hence, properties such as functional active groups, dimensions, and hydrophobicity were the determining parameters in the adsorption process mechanism. Accordingly, the pharmaceuticals biosorption mechanism involved π-π bonding, hydrophobic effect, electrostatic interaction, and van der Waals forces whereas the dye biosorption mechanism was dominated as well known by electrostatic attraction and hydrogen bonding phenomenon. Experimental parameters such as initial pH of solution and contact time were optimized. The optimum pH values were 2.0 for ibuprofen (IBP) and 7.0 for ampicillin (AMP). The kinetics of adsorption and the experimental isotherms data were analyzed using non-linear models. Results indicated that Avrami fractional order was the most successfully fitted model for pharmaceutical biosorption and based on the statistical values of SD and R²_adj parameters, Liu isotherm was the most successfully fitted model.

Imatinib: Major photocatalytic degradation pathways in aqueous media and the relative toxicity of its transformation products

Imatinib (IMA) is a highly potent tyrosine kinase inhibitor used as first-line anti-cancer drug in the treatment of chronic myeloid leukemia. Due to its universal mechanism of action, IMA also has endocrine and mutagenic disrupting effects in vivo and in vitro, which raises the question of its environmental impact. However, to date, very little information is available on its environmental fate and the potential role of its transformation products (TPs) on aquatic organisms. Given the IMA resistance to hydrolysis and direct photolysis according to the literature, we sought to generate TPs through oxidative and radical conditions using the AOPs pathway. Thus, the reactivity of the cytotoxic drug IMA in water in the presence of OH and h+ was investigated for the first time in the present work. In this regard, a non-targeted screening approach was applied in order to reveal its potential TPs. The tentative structural elucidation of the detected TPs was performed by LC-HRMSⁿ. The proposed approach allowed detecting a total of twelve TPs, among which eleven are being described for the first time in this work. Although the structures of these TPs could not be positively confirmed due to lack of standards, their chemical formulas and product ions can be added to databases, which will allow their screening in future monitoring studies. Using the quantitative structure-activity relationship (QSAR) approach and rule-based software, we have shown that the detected TPs possess, like their parent molecule, comparable acute toxicity as well as mutagenic and estrogenic potential. In addition to the in silico studies, we also found that the samples obtained at different exposure times to oxidative conditions, including those where IMA is no longer detected, retained toxicity in vitro. Such results suggest further studies are needed to increase our knowledge of the impact of imatinib on the environment.

Degradation of Sulfamethoxazole by Electrochemically Activated Persulfate Using Iron Anode

In this study, sulfamethoxazole (SMX) was removed by electrochemically activated persulfate using iron anode. Different oxidation processes (persulfate alone, Fe2+/persulfate, electrolysis alone, electrochemically/Persulfate) were investigated, the results showed SMX could be more efficiently degraded under the electrochemically/Persulfate system. Central composite design (CCD) based Response surface methodology (RSM) was used to optimize and elucidate the individual and interactive effects of independent variables on the degradation kinetics of sulfamethoxazole. The maximum kinetics was predicted by CCD as pH 3.6, 18 mA applied current and 3.55 mM/L persulfate concentration. The results of free-radical scavenging experiments and electron paramagnetic resonance (EPR) indicated that both {\text{SO}}_4^{ \cdot - } and HO· were responsible for the degradation of SMX. The inhibition of methanol (MeOH) was lower than tertiary butanol (TBA), due to the generation of methanol radical (·CH2OH), which promoted the reduction of Fe3+to Fe2+. LC-ESI-TOF-MS analysis was done on SMX and its intermediates. The SMX degradation pathway during the electrochemical treatment was proposed. In addition, two typical inorganic anions ( {\text{C}}{{\text{l}}^ - },{\text{HCO}}_3^ -) were investigated and the inhibitory effect of {\text{HC}}O_3^ - was more obvious.

Delineation of 3D dose-time-toxicity in human pulmonary epithelial Beas-2B cells induced by decabromodiphenyl ether (BDE209)

Due to frequent detection in environment as well as in the human body, the adverse effects of decabromodiphenyl ether (BDE209) have been extensively studied in the past few years. However, information regarding the inhalation toxicity of BDE209 to humans is currently limited. In this study, the cytotoxicity, cell damage, and inflammation markers including IL-6, IL-8, and TNF-α in the Beas-2B cell line induced by BDE209 were measured using a central composite design. Results showed that as BDE209 concentrations (5-65 μg mL^-1) and exposure time (6-30 h) were increased, cell viability sharply decreased from 99.7% to 29.7% and LDH activity increased from 0.1% to 13.1%. Furthermore, expression of IL-6, IL-8 and TNF-α transcripts were enhanced from 4.7 to 29.1 fold, 3.4-68.9 fold, and 2.8-47.0 fold, respectively, and the concentration of IL-6 and IL-8 proteins increased from 5.4 to 16.7 pg mL^-1 and 71.0-550.0 pg mL^-1, respectively. Results indicate that BDE209 exposure can inhibit cell viability, increase LDH leakage, and upregulate the transcript (mRNA) and protein levels of inflammatory markers of IL-6 and IL-8 in Beas-2B cells. Moreover, these effects were both dose- and time-dependent, and dose and time had a synergistic effect - enhancing toxicity when in combination. Cell density affected both LDH activity and IL-8 release but had little effect on cell activity and IL-6 release in the Beas-2B cells. In contrast, TNF-α protein was not detected but its mRNA expression level was upregulated. This study will provide a reference for human health risk assessment, especially for the toxic damage that BDE209 exposure can elicit in the respiratory tract.

Environmental fate and ecotoxicological effects of antiretrovirals: A current global status and future perspectives

The therapeutic efficacy of antiretroviral drugs as well as challenges and side effects against the human immunodeficiency virus is well documented and reviewed. Evidence is available in literature indication that antiretrovirals are only partially transformed and become completely excreted from the human body in their original form and/or as metabolites in urine and feces. The possibility of massive release of antiretrovirals through human excreta that enters surface water through surface runoff and wastewater treatment plant effluents is now of environmental concern because the public might be experiencing chronic exposure to antiretrovirals. The primary concern of this review is limited data concerning environmental fate and ecotoxicity of antiretrovirals and their metabolites. The review aims to provide a comprehensive insight into the evaluation of antiretrovirals in environmental samples. The objective is therefore to assess the extent of analysis of antiretrovirals in environmental samples and also look at strategies including instrumentation and predictive models that have been reported in literature on the fate and ecotoxicological effects due to presence of antiretrovirals in different environmental compartments. The review also looks at current challenges and offers possible areas of exploration that could help minimize the presence of antiretrovirals in the environment.

Visible-light-driven removal of tetracycline antibiotics and reclamation of hydrogen energy from natural water matrices and wastewater by polymeric carbon nitride foam

Water and energy are key sustainability issues that need to be addressed. Photocatalysis represents an attractive means to not only remediate polluted waters, but also harness solar energy. Unfortunately, the employment of photocatalysts remains a practical challenge in terms of high cost, low efficiency, secondary pollution and unexploited water matrices influence. This study investigated the feasibility of photocatalysis to both treat water and produce hydrogen with practical water systems. Polymeric carbon nitride foam (CNF) with large surface area and mesoporous structure was successfully prepared via the bubble-template effect of ammonium chloride decomposition during thermal condensation. The reaction kinetics, mechanisms, and effect of natural water matrices and wastewater on CNF-based photocatalytic removal of tetracycline hydrochloride (TC-HCl) were systematically investigated. Furthermore, the efficiency of clean hydrogen energy from natural water matrices and wastewater was also evaluated. It was found that the photocatalytic performance of CNF for TC-HCl removal was principally affected by calcination temperature in the presence of NH₄Cl. The degradation rates of CNF-4 (calcined at 550 °C) were approximately 1.84, 2.49 and 7.47 times than that of the CNF-2 (calcined at 600 °C), CNF-1 (calcined at 500 °C) and GCN (without NH₄Cl), respectively. Results indicate that the improved photocatalytic performance was predominantly ascribed to the large specific surface area, increased availability of exposed active sites, and enhanced transport and separation efficiency of the photogenerated carrier. Based on electron spin resonance, chemical trapping experiment and density functional theory calculation, photoinduced oxidizing species (·O₂^- and holes) initially attacked the C-N-C fragment of TC molecules, which were finally mineralized to CO₂, water and inorganic matters. Under the synergistic influence of water constituents (including acidity and alkalinity, ion species and dissolved organic substances), various water matrices greatly affected the degradation rate of TC-HCl, with the highest removal efficiency of 78.9% in natural seawater, followed by reservoir water (75.0%), tap water (62.3%), deionized water (49.8%), reverse osmosis concentrate (32.7%) and pharmaceutical wastewater (18.9%). Interestingly, low amounts of the emerging microplastics slightly improved TC-HCl removal, whereas high amounts (1.428 × 10⁷ P/cm³) restricted removal due to light absorption and the intrinsic adsorption interaction. Moreover, the photocatalysts were able over repeated usage. Notably, the hydrogen yields rates of polymeric carbon nitride foam were 352.2, 299.8, 184.9 and 94.3 μmol/g/h in natural seawater, pharmaceutical wastewater, water from reservoir and tap water, respectively. This study proves the potential of novel nonmetal porous photocatalyst to simultaneously treat wastewater while converting solar energy into clean hydrogen energy.

Combined ultrasound with Fenton treatment for the degradation of carcinogenic polycyclic aromatic hydrocarbons in textile dying sludge

To develop an effective method to remove the toxic and carcinogenic polycyclic aromatic hydrocarbons (CPAHs) from textile dyeing sludge, five CPAHs were selected to investigate the degradation efficiencies using ultrasound combined with Fenton process (US/Fenton). The results showed that the synergistic effect of the US/Fenton process on the degradation of CPAHs in textile dyeing sludge was significant with the synergy degree of 30.4. During the US/Fenton process, low ultrasonic density showed significant advantage in degrading the CPAHs in textile dyeing sludge. Key reaction parameters on CPAHs degradation were optimized by the central composite design as followed: H₂O₂ concentration of 152 mmol/L, ultrasonic density of 408 W/L, pH value of 3.7, the molar ratio of H₂O₂ to Fe²⁺ of 1.3 and reaction time of 43 min. Under the optimal conditions of the US/Fenton process, the degradation efficiencies of five CPAHs were obtained as 81.23% (benzo[a]pyrene) to 84.98% (benz[a]anthracene), and the benzo[a]pyrene equivalent (BaP_eq) concentrations of five CPAHs declined by 81.22-85.19%, which indicated the high potency of US/Fenton process for removing toxic CPAHs from textile dyeing sludge.

Bismuth vanadate-based semiconductor photocatalysts: a short critical review on the efficiency and the mechanism of photodegradation of organic pollutants

The number of publications on photocatalytic bismuth vanadate-based materials is constantly increasing. Indeed, bismuth vanadate is gaining stronger interest in the photochemical community since it is a solar-driven photocatalyst. However, the efficiency of BiVO₄-based photocatalyst under sunlight is questionable: in most of the studies investigating the photodegradation of organic pollutants, only few works identify the by-products and evaluate the real efficiency of BiVO₄-based materials. This short review aims to (i) present briefly the principles of photocatalysis and define the photocatalytic efficiency and (ii) discuss the formation of reactive species involved in the photocatalytic degradation process of pollutants and thus the corresponding photodegradation mechanism could be determined. All these points are developed in a comprehensive discussion by focusing especially on pure, doped, and composite BiVO₄. Therefore, this review exhibits a critical overview on different BiVO₄-based photocatalytic systems with their real efficiency. This is a necessary knowledge for potential implementation of BiVO₄ materials in environmental applications at larger scale than laboratory conditions.

Synthesis of silver phosphate/graphene oxide composite and its enhanced visible light photocatalytic mechanism and degradation pathways of tetrabromobisphenol A

In the present study, silver phosphate/graphene oxide (Ag₃PO₄/GO) composite was synthesized by ultrasound-precipitation processes. Afterwards, physicochemical properties of the resulting samples were studied through scanning electron microscope, transmission electron microscope, X-ray diffraction, N₂ adsorption/desorption, UV-vis diffuse reflectance spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, surface photovoltage spectroscopy and photoelectrochemical measurements. Results indicated that spherical Ag₃PO₄ displayed an average diameter of 150 nm and body-centered cubic crystal phase, which was integrated with GO. In addition, the visible light absorbance, charge separation efficiency and lifetime of Ag₃PO₄ were significantly improved by integration with GO. In addition, Ag₃PO₄/GO composite was applied to decompose tetrabromosphenol A (TBBPA) in water body. It was found that TBBPA could be completely decomposed within 60 min illumination. Furthermore, several scavenger experiments were conducted to distinguish the contribution of reactive species to the photoctalytic efficiency. Moreover, the enhanced visible light mechanism of Ag₃PO₄/GO was proposed and discussed. Eventually, several PC decomposition pathways of TBBPA were identified including directly debromination and oxidation, and subsequently further oxidation and hydroxylation processes.

Degradation of venlafaxine using TiO2/UV process: Kinetic studies, RSM optimization, identification of transformation products and toxicity evaluation

The photochemical degradation of the antidepressant drug venlafaxine (VNF) by UV/TiO₂ process was investigated in the present study. Prescreening experiments were conducted to study the effects of main parameters affecting the photocatalytic process. In addition, the effects and interactions of most influenced parameters were evaluated and optimized by using a central composite design model and a response surface methodology. Results indicated that VNF was quickly removed in all the irradiation experiments and its degradation was mainly affected by the studied variables (catalyst dose, initial VNF concentration and pH), as well as their interaction effects. Parallel to kinetic studies, the transformation products (TPs) generated during the treatment was investigated using LC coupled to low and high resolution mass spectrometry. Based on identification of the main TPs, tentative transformation pathways were proposed, including hydroxylation, demethylation and dehydration as major transformation routes. Τhe potential risk of VNF and its TPs to aqueous organisms was also investigated using Microtox bioassay before and during the processes. The obtained results showed an increment in the acute toxicity in the first stages and a continuously decreasing after then to very low values reached within 240min of the photocatalytic treatment, demonstrating that UV/TiO₂ can lead to the elimination of parent compound and the detoxification of the solution.