Inoculation with bacteria in floating treatment wetlands positively modulates the phytoremediation of oil field wastewater

Electrode-based floating treatment wetlands: Insights into design operation factors influencing bioenergy generation and treatment performance

Exponential increases in energy consumption and wastewater have often irreversible environmental impacts. As a result, bio-electrochemical devices like microbial fuel cells (MFCs), which convert chemical energy in organic matter to electricity using exoelectrogenic bacteria, have gained interest. However, operational factors affecting efficiency and energy output need further study. This research investigated bioenergy production and COD, TN, and TP removal in mesoscale floating treatment wetlands (FTW-MFC) using Phragmites australis, Iris pseudacorus, and a mix of both. The Iris FTW-MFC achieved a high voltage peak of 2100 mV. The maximum power densities of 484 mW/m2, 1196 mW/m2, and 441 mW/m2 were observed for Phragmites, Iris, and mixed FTW-MFCs, respectively. Despite promising bioenergy yields, pollutant removal was unsatisfactory. A low area/height ratio (0.38 m2/0.8 m) and high loading rate (18.1 g/m2·d COD) boosted bioenergy output but hindered treatment performance and stressed plants, causing root decay. No significant pollutant removal differences were found between FTW-MFC and FTW. Higher relative plant growth rates occurred in the FTW-MFC. Microbial analysis shown that representatives of Pseudomonas and Clostridium species were consistently found across all samples, involved in both organic compound transformation and electricity generation, contributed to successful microscale results. A supporting microscale MFC experiment showed wastewater composition's impact on bioenergy yield and pollutant removal. Pre-inoculated reactors improved organic matter transformation and electricity generation, while aeration increased voltage and treatment performance. The role of plants requires further verification in future experiments.

Plant species influences the composition of root system microbiome and its antibiotic resistance profile in a constructed wetland receiving primary treated wastewater

Introduction

Constructed wetlands (CWs) are nature-based solutions for wastewater treatment where the root system microbiome plays a key role in terms of nutrient and pollutant removal. Nonetheless, little is known on plant-microbe interactions and bacterial population selection in CWs, which are mostly characterized in terms of engineering aspects.

Methods

Here, cultivation-independent and cultivation-based analyses were applied to study the bacterial communities associated to the root systems of Phragmites australis and Typha domingensis co-occurring in the same cell of a CW receiving primary treated wastewaters.

Results and discussion

Two endophytic bacteria collections (n = 156) were established aiming to find novel strains for microbial-assisted phytodepuration, however basing on their taxonomy the possible use of these strains was limited by their low degrading potential and/or for risks related to the One-Health concept. A sharp differentiation arose between the P. australis and T. domingensis collections, mainly represented by lactic acid bacteria (98%) and Enterobacteriaceae (69%), respectively. Hence, 16S rRNA amplicon sequencing was used to disentangle the microbiome composition in the root system fractions collected at increasing distance from the root surface. Both the fraction type and the plant species were recognized as drivers of the bacterial community structure. Moreover, differential abundance analysis revealed that, in all fractions, several bacteria families were significantly and differentially enriched in P. australis or in T. domingensis. CWs have been also reported as interesting options for the removal of emerging contaminants (e.g, antibiotic resistance genes, ARGs). In this study, ARGs were mostly present in the rhizosphere of both plant species, compared to the other analyzed fractions. Notably, qPCR data showed that ARGs (i.e., ermB, bla TEM, tetA) and intl1 gene (integrase gene of the class 1 integrons) were significantly higher in Phragmites than Typha rhizospheres, suggesting that macrophyte species growing in CWs can display a different ability to remove ARGs from wastewater. Overall, the results suggest the importance to consider the plant-microbiome interactions, besides engineering aspects, to select the most suitable species when designing phytodepuration systems.

Mitigating sediment cadmium contamination through combining PGPR Enterobacter ludwigii with the submerged macrophyte Vallisneria natans

Sediment cadmium contamination poses risks to aquatic ecosystems. Phytoremediation is an environmentally sustainable method to mitigate cadmium contamination. Submerged macrophytes are affected by cadmium stress, but plant growth-promoting rhizobacteria (PGPR) can restore the health status of submerged macrophytes. Herein, we aimed to reduce sediment cadmium concentration and reveal the mechanism by which the combined application of the PGPR Enterobacter ludwigii and the submerged macrophyte Vallisneria natans mitigates cadmium contamination. Sediment cadmium concentration decreased by 21.59% after submerged macrophytes were planted with PGPR, probably because the PGPR colonized the rhizosphere and roots of the macrophytes. The PGPR induced a 5.09-fold increase in submerged macrophyte biomass and enhanced plant antioxidant response to cadmium stress, as demonstrated by decreases in oxidative product levels (reactive oxygen species and malondialdehyde), which corresponded to shift in rhizosphere metabolism, notably in antioxidant defence systems (i.e., the peroxidation of linoleic acid into 9-hydroperoxy-10E,12Z-octadecadienoic acid) and in some amino acid metabolism pathways (i.e., arginine and proline). Additionally, PGPR mineralized carbon in the sediment to promote submerged macrophyte growth. Overall, PGPR mitigated sediment cadmium accumulation via a synergistic plantmicrobe mechanism. This work revealed the mechanism by which PGPR and submerged macrophytes control cadmium concentration in contaminated sediment.

In vitro assessment of crude oil degradation by Acinetobacter junii and Alcanivorax xenomutans isolated from the coast of Ghana

This study was aimed at using in vitro microcosm experiments to assess crude oil degradation efficiency of Acinetobacter junii and Alcanivorax xenomutans isolated along Ghana's coast. Uncontaminated seawater from selected locations along the coast was used to isolate bacterial species by employing enrichment culture procedures with crude oil as the only carbon source. The isolates were identified by means of the extended direct colony transfer method of the Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectroscopy (MALDI-TOF MS), as Acinetobacter junii, and Alcanivorax xenomutans. Remediation tests showed that Acinetobacter junii yielded degradation efficiencies of 27.59 %, 41.38 % and 57.47 %. Whereas efficiencies of 21.14 %, 32.18 % and 43.68 % were recorded by Alcanivorax xenomutans representing 15, 30 and 45 days respectively. Consortia of Acinetobacter junii, and Alcanivorax xenomutans also yielded 32.18 %, 48.28 % and 62.07 % for the selected days respectively. Phylogenetic characterization using ClustalW and BLAST of sequences generated from the Oxford Nanopore Sequencing technique, showed that the Ghanaian isolates clustered with Alcanivorax xenomutans and Acinetobacter junii species respectively. An analysis of the sequenced data for the 1394-bp portion of the 16S rRNA gene of the isolates revealed >99 % sequence identity with the isolates present on the GenBank database. The isolates of closest identity were Alcanivorax xenomutans and Acinetobacter junii with accession numbers, NR_133958.1 and KJ147060.1 respectively. Acinetobacter junii and Alcanivorax xenomutans isolated from Ghana's coast under pristine seawater conditions have therefore demonstrated their capacity to be used for the remediation of crude oil spills.

Industrial wastewater treatment using floating wetlands: a review

Industrial wastewater generated from various production processes is often associated with elevated pollutant concentrations and environmental hazards, necessitating efficient treatment. Floating wetlands (FWs) have emerged as a promising and eco-friendly solution for industrial wastewater treatment, with numerous successful field applications. This article comprehensively reviews the removal mechanisms and treatment performance in the use of FWs for the treatment of diverse industrial wastewaters. Our findings highlight that the performance of FWs relies on proper plant selection, design, aeration, season and temperature, plants harvesting and disposal, and maintenance. Well-designed FWs demonstrate remarkable effectiveness in removing organic matter (COD and BOD), suspended solids, nutrients, and heavy metals from industrial wastewater. This effectiveness is attributed to the intricate physical and metabolic interactions between plants and microbial communities within FWs. A significant portion of the reported applications of FWs revolve around the treatment of textile and oily wastewater. In particular, the application reports of FWs are mainly concentrated in temperate developing countries, where FWs can serve as a feasible and cost-effective industrial wastewater treatment technology, replacing high-cost traditional technologies. Furthermore, our analysis reveals that the treatment efficiency of FWs can be significantly enhanced through strategies like bacterial inoculation, aeration, and co-plantation of specific plant species. These techniques offer promising directions for further research. To advance the field, we recommend future research efforts focus on developing novel floating materials, optimizing the selection and combination of plants and microorganisms, exploring flexible disposal methods for harvested biomass, and designing multi-functional FW systems.

Technologies for performance intensification of floating treatment wetland - An explicit and comprehensive review

With the wide application of floating treatment wetland (FTW), the limited performance of FTWs should be improved. A comprehensive review is accordingly necessary to summarize the state-of-the-art on FTWs for performance improvement. An attempt has been made to gain information from literature about technologies to enhance the performance of FTWs. These technologies have been classified into three categories according to their mechanisms: 1) increasing the amount and activity of bacteria; 2) enhancing the growth of plant; and 3) configurable innovations. The design and application of each enhanced FTW have been discussed in detail. Thereafter, all the technologies have been compared and analyzed according to their improvement in pollutant removal and ecological effects. In summary, FTW with additional bio-carriers has a higher potential for future applications with the benefits of wide application conditions, scale-up potential, and the easy combination with other methods to further improve the removal efficiency. The stability and sustainability of these technologies should be further investigated.

Improved remediation of amoxicillin-contaminated water by floating treatment wetlands intensified with biochar, nutrients, aeration, and antibiotic-degrading bacteria

Residual antibiotics have become emerging contaminants of concern for their adverse impact on the ecosystem. Additionally, their accumulation in the environment is increasing antibiotic resistance among pathogens. This study assessed the impact of intensification of biochar, nutrients, aeration, and bacteria (BNAB) on the remediation potential of floating treatment wetlands (FTWs) to treat amoxicillin (AMX)-contaminated water. The FTWs were developed with saplings of Vetiveria zizanioides and intensified with biochar (1.5%), nutrients (25 mgL-1 N, 25 mgL-1 P, 20 mg L1 K), aeration (7 mg L-1), and AMX-degrading bacteria. The results showed that all the amendments enhanced the AMX degradation, while the maximum reduction in COD (89%), BOD (88%), TOC (87%), and AMX (97%) was shown by the combined application of all the amendments. The combined application also enhanced plant growth and persistence of the inoculated bacteria in the water, roots, and shoots. This approach can be employed for the low-cost, environment-friendly treatment, and recycling of antibiotic-contaminated wastewater, where BNAB intensification can further improve the bioremediation efficiency of FTWs in the case of heavily polluted waters.

Pilot and full scale applications of floating treatment wetlands for treating diffuse pollution

Floating treatment wetlands (FTW) are nature-based solutions for the purification of open water systems such as rivers, ponds, and lakes polluted by diffuse sources as untreated or partially treated domestic wastewater and agricultural run-off. Compared with other physicochemical and biological technologies, FTW is a technology with low-cost, simple configuration, easy to operate; has a relatively high efficiency, and is energy-saving, and aesthetic. Water remediation in FTWs is supported by plant uptake and the growth of a biofilm on the water plant roots, so the selection of the macrophyte species is critical, not only to pollutant removal but also to the local ecosystem integrity, especially for full-scale implementation. The key factors such as buoyant frame/raft, plant growth support media, water depth, seasonal variation, and temperature have a considerable role in the design, operation, maintenance, and pollutant treatment performance of FTW. Harvesting is a necessary process to maintain efficient operation by limiting the re-pollution of plants in the decay phase. Furthermore, the harvested plant biomass can serve as a green source for the recovery of energy and value-added products.

Microbial degradation of naphthenic acids using constructed wetland treatment systems: metabolic and genomic insights for improved bioremediation of process-affected water

Naphthenic acids (NAs) are a complex mixture of organic compounds released during bitumen extraction from mined oil sands that are important contaminants of oil sands process-affected water (OSPW). NAs can be toxic to aquatic organisms and, therefore, are a main target compound for OSPW. The ability of microorganisms to degrade NAs can be exploited for bioremediation of OSPW using constructed wetland treatment systems (CWTS), which represent a possible low energy and low-cost option for scalable in situ NA removal. Recent advances in genomics and analytical chemistry have provided insights into a better understanding of the metabolic pathways and genes involved in NA degradation. Here, we discuss the ecology of microbial NA degradation with a focus on CWTS and summarize the current knowledge related to the metabolic pathways and genes used by microorganisms to degrade NAs. Evidence to date suggests that NAs are mostly degraded aerobically through ring cleavage via the beta-oxidation pathway, which can be combined with other steps such as aromatization, alpha-oxidation, omega-oxidation, or activation as coenzyme A (CoA) thioesters. Anaerobic NA degradation has also been reported via the production of benzoyl-CoA as an intermediate and/or through the involvement of methanogens or nitrate, sulfate, and iron reducers. Furthermore, we discuss how genomic, statistical, and modeling tools can assist in the development of improved bioremediation practices.

Exploring the potential of bacterial-augmented floating treatment wetlands for the remediation of detergent-contaminated water

Due to industrialization and urbanization, the use of detergents inadvertently led to contamination of aquatic environments, thus posing potential threat to aquatic organisms and human health. One of the main components of detergents is linear alkylbenzene sulfonate (LAS), which can cause toxic effects on living organisms, particularly aquatic life in the environment. In this study, floating treatment wetlands (FTWs) mesocosms were developed and augmented with LAS-degrading bacteria. The plant species, Brachiaria mutica (Para grass), was vegetated to establish FTWs and bacterial consortium (1:1:1:1) of Pseudomonas aeruginosa strain PJRS20, Bacillus sp. BRRH60, Acinetobacter sp. strain CYRH21, and Burkholderia phytofirmans Ps.JN was augmented (free or immobilized) in these mesocosms. Results revealed that the FTWs removed LAS from the contaminated water and their augmentation with bacteria slightly increased LAS removal during course of the experiment. Maximum reduction in LAS concentration (94%), chemical oxygen demand (91%), biochemical oxygen demand (93%), and total organic carbon (91%) was observed in the contaminated water having FTWs augmented with bacterial consortium immobilized on polystyrene sheet. This study highlights that the FTWs supported with immobilized bacteria on polystyrene sheets can provide an eco-friendly and sustainable solution for the remediation of LAS-bearing water, especially for developing countries like Pakistan.

Hydrocarbon degradation strategy and pyoverdine production using the salt tolerant Antarctic bacterium Marinomonas sp. ef1

One of the most concerning environmental problems is represented by petroleum and its derivatives causing contamination of aquatic and underground environments. In this work, the degradation treatment of diesel using Antarctic bacteria is proposed. Marinomonas sp. ef1 is a bacterial strain isolated from a consortium associated with the Antarctic marine ciliate Euplotes focardii. Its potential in the degradation of hydrocarbons commonly present in diesel oil were studied. The bacterial growth was evaluated in culturing conditions that resembled the marine environment with 1% (v/v) of either diesel or biodiesel added; in both cases, Marinomonas sp. ef1 was able to grow. The chemical oxygen demand measured after the incubation of bacteria with diesel decreased, demonstrating the ability of bacteria to use diesel hydrocarbons as a carbon source and degrade them. The metabolic potential of Marinomonas to degrade aromatic compounds was supported by the identification in the genome of sequences encoding various enzymes involved in benzene and naphthalene degradation. Moreover, in the presence of biodiesel, a fluorescent yellow pigment was produced; this was isolated, purified and characterized by UV-vis and fluorescence spectroscopy, leading to its identification as a pyoverdine. These results suggest that Marinomonas sp. ef1 can be used in hydrocarbon bioremediation and in the transformation of these pollutants in molecules of interest.

Distinct gut bacterial composition in Anoplophora glabripennis reared on two host plants

Anoplophora glabripennis (Coleoptera: Cerambycidae: Lamiinae) is an invasive wood borer pest that has caused considerable damage to forests. Gut bacteria are of great importance in the biology and ecology of herbivores, especially in growth and adaptation; however, change in the gut bacterial community of this pest feeding on different hosts is largely unknown. In this study, we investigated the gut bacterial communities of A. glabripennis larvae fed on different preferred hosts, Salix matsudana and Ulmus pumila, using 16S rDNA high-throughput sequencing technology. A total of 15 phyla, 25 classes, 65 orders, 114 families, 188 genera, and 170 species were annotated in the gut of A. glabripennis larvae fed on S. matsudana or U. pumila using a 97% similarity cutoff level. The dominant phyla were Firmicutes and Proteobacteria and the core dominant genera were Enterococcus, Gibbsiella, Citrobacter, Enterobacter, and Klebsiella. There was significantly higher alpha diversity in the U. pumila group than in the S. matsudana group, and principal co-ordinate analysis showed significant differences in gut bacterial communities between the two groups. The genera with significant abundance differences between the two groups were Gibbsiella, Enterobacter, Leuconostoc, Rhodobacter, TM7a, norank, Rhodobacter, and Aurantisolimonas, indicating that the abundance of larval gut bacteria was affected by feeding on different hosts. Further network diagrams showed that the complexity of the network structure and the modularity were higher in the U. pumila group than in the S. matsudana group, suggesting more diverse gut bacteria in the U. pumila group. The dominant role of most gut microbiota was related to fermentation and chemoheterotrophy, and specific OTUs positively correlated with different functions were reported. Our study provides an essential resource for the gut bacteria functional study of A. glabripennis associated with host diet.

Sequential application of activated sludge and phytoremediation with aquatic macrophytes on tannery effluents: in search of a complete treatment

Tannery effluents with a high organic matter load (indicated by their COD level) have to be treated before they are discharged, so as to minimize their negative impact on the environment. Using field mesocosm systems, this study evaluated the feasibility of treating such effluents through bioaugmentation with activated sludge, followed by phytoremediation with aquatic macrophytes (Lemnoideae subfamily). Regardless of its quality, the activated sludge was able to remove approximately 77% of the COD from effluents with a low initial organic load (up to 1500 mg/L). The macrophytes then enhanced removal (up to 86%), so the final COD values were permissible under the current legislation for effluent discharge. When the initial organic load in the undiluted effluents was higher (around 3000 mg/L), the COD values obtained after consecutive bioaugmentation and phytoremediation were close to the legally allowed limits (583 mg/L), which highlights the potential of phytoremediation as a tertiary treatment. This treatment also brought total coliform counts down to legally acceptable values, without plant biomass decreasing over time. Moreover, the plant biomass remained viable and capable of high COD removal efficiency (around 75%) throughout two additional reuse cycles. These findings indicate that the efficiency of the biological treatments assayed here depends largely on the initial organic load in the tannery effluents. In any case, the sequential application of activated sludge and aquatic macrophytes proved to be a successful alternative for remediation.

The Usability of Sorbents in Restoring Enzymatic Activity in Soils Polluted with Petroleum-Derived Products

Due to their ability to adsorb or absorb chemical pollutants, including organic compounds, sorbents are increasingly used in the reclamation of soils subjected to their pressure, which results from their high potential in eliminating xenobiotics. The precise optimization of the reclamation process is required, focused primarily on restoring the condition of the soil. This research are essential for seeking materials sufficiently potent to accelerate the remediation process and for expanding knowledge related to biochemical transformations that lead to the neutralization of these pollutants. The goal of this study was to determine and compare the sensitivity of soil enzymes to petroleum-derived products in soil sown with Zea mays, remediated using four sorbents. The study was conducted in a pot experiment, with loamy sand (LS) and sandy loam (SL) polluted with VERVA diesel oil (DO) and VERVA 98 petrol (P). Soil samples were collected from arable lands, and the effects of the tested pollutants were compared with those used as control uncontaminated soil samples in terms of Zea mays biomass and the activity of seven enzymes in the soil. The following sorbents were applied to mitigate DO and P effects on the test plants and enzymatic activity: molecular sieve (M), expanded clay (E), sepiolite (S), and Ikasorb (I). Both DO and P exerted a toxic effect on Zea mays, with DO more strongly disturbing its growth and development and the activities of soil enzymes than P. In sandy clay (SL), P was found to be a significant inhibitor of dehydrogenases (Deh), catalase (Cat), urease (Ure), alkaline phosphatase (Pal), and arylsulfatase (Aryl) activities, while DO stimulated the activity of all enzymes in this soil. The study results suggest that the sorbents tested, mainlya molecular sieve, may be useful in remediating DO-polluted soils, especially when alleviating the effects of these pollutants in soils of lower agronomic value.

Production and Characterisation of an Exopolysaccharide by Bacillus amyloliquefaciens: Biotechnological Applications

The Bacillus amyloliquefaciens RT7 strain was isolated from an extreme acidic environment and identified. The biodegradation capabilities of the strain using different carbon sources (glucose, oleic acid, Tween 80, PEG 200, and the combination of glucose-Tween 80) were evaluated via an indirect impedance technique. The glucose-Tween 80 combination was further studied using nuclear magnetic resonance (NMR). The exopolysaccharide (EPS_RT7) that had been produced with the strain when biodegrading glucose-Tween 80 was isolated and characterised using different techniques (GC-MS, HPLC/MSMS, ATR-FTIR, TGA, and DSC), and its molecular weight was estimated. The results show that the average molecular weight of EPS_RT7 was approximately 7.0794 × 10⁴ Da and a heteropolysaccharide composed of mannose, glucose, galactose, and xylose (molar ratio, 1:0.5:0.1:0.1) with good thermostability. EPS_RT7 showed good emulsifying activity against different natural oils and hydrocarbons at high concentrations (2 mg/mL) and at the studied pH range (3.1-7.2). It also presented good emulsifying activity compared to that of commercial emulsifiers. Lastly, EPS_RT7 showed antioxidant capacity for different free radicals, a lack of cytotoxicity, and antioxidant activity at the cellular level. EPS_RT7 has promising applications in bioremediation processes and other industrial applications.

New insights for tracking bacterial community structures in industrial wastewater from textile factories to surface water using phenotypic, 16S rRNA isolates identifications and high-throughput sequencing

Industrial wastewater can possibly change the microbial ecological environment. There are few studies that focus on the bacterial variety in textile wastewater effluents and after combination with domestic wastewater. Thus, this study aimed to determine dye degrading bacteria from textile wastewater and environmental water samples using cultural method followed by phenotypic using BIOLOG and genotypic identification (16S rRNA) for dye degrading isolates identifications. Moreover, the bacterial communities in three textile and four environmental samples using Illumina MiSeq high-throughput sequencing were investigated. The findings revealed that in textile water samples, the ratio of dye-degrading bacteria (DDB) to total bacterial counts (TBC) was 27%. The identified DDB genera by 16S rRNA based on the cultural approach were Citrobacter spp., Klebsiella spp., Enterobacter spp., Pseudomonas spp., and Aeromonas spp. Regarding to the metagenomics analyses, the environmental samples had 5,598 Operational Toxanomic Units (OTUs) more than textile wastewater samples (1,463 OTUs). Additionally, the most abundant phyla in the textile wastewater were Proteobacteria (24.45-94.83%), Bacteriodetes (0.5-44.84%) and Firmicutes (3.72-67.40%), while, Proteobacteria (30.8-76.3%), bacteroidetes (8.5-50%) and Acentobacteria (0.5-23.12%) were the most abundant phyla in the environmental samples. The maximum abundant bacteria at species level in environmental samples were Aquabacterium parvum (36.71%), Delftia tsuruhatensis (17.61%), Parabacteriodes chartae (15.39%) and Methylorubrum populi (7.51%) in El-Rahawy Drain water (RDW), River Nile water (RNW), wastewater (RWW) from WWTP in Zennin and El-Rahawy Drain sediment (RDS), respectively, whereas the maximum abundant bacteria at species level in textile wastewater were Alkalibacterium pelagium (34.11%), Enterobacter kobei (26.09%) and Chryseobacterium montanum (16.93%) in factory 1 (HBT) sample, SHB sample (before mixing with domestic wastewater) and SHB sample (after mixing with domestic wastewater), respectively. In conclusion, the microbial communities in textile wastewaters are similar to those in environmental samples at the phylum level but distinct at the genus and species levels because they are exposed to a wider range of environmental circumstances.

Phytoremediation of industrial effluents assisted by plant growth promoting bacteria

Industrialization plays a crucial role in the economic development of a country; however, the effluents produced as a byproduct generally contain toxic substances which are detrimental to living organisms. In this regard, it is essential to treat these toxic effluents before exposing them to the natural environment by selecting the most appropriate method accordingly. Several techniques are used to remediate industrial effluents including physical, chemical, and biological. Although some physical and chemical remediation technologies are of substantially important in remediation of industrial effluents, however, these technologies are either expensive to be applied by developing countries or not suitable for remediation of all kinds of effluents. In contrast, biological remediation is cost effective, nature friendly, and easy to use for almost all kinds of effluents. Among biological remediation strategies, phytoremediation is considered to be the most suitable method for remediation of industrial effluents; however, the phytoremediation process is slow, takes time in application and some effluents even affect plants growth and development. Alternately, plant microbe interactions could be a winning partner to remediate industrial effluents more efficiently. Among the microbes, plant growth promoting bacteria (PGPB) not only improve plant growth but also help in degradation, sequestration, volatilization, solubilization, mobilization, and bioleaching of industrial effluents which subsequently improve the phytoremediation process. The current study discusses the role of PGPB in enhancing the phytoremediation processes of industrial effluents.

Enhanced Crude Oil Sorption by Modified Plant Materials in Oilfield Wastewater Treatment

The treatment of oilfield wastewater with high crude oil content and complex composition is a problem requiring considerable attention. In order to effectively remove crude oil contained in wastewater, in this work, rice straw, as an oil-absorbing material, was modified and used as a sorbent for crude oil. Rice straw was modified with alkali and cetyltrimethylammonium chloride (CTAC) by simple substitution reaction. The adsorption capacity of modified rice straw for oil was evaluated. The results illustrate that the adsorption rate of rice straw for crude oil was increased from 0.83 to 8.49 g/g, with the optimal conditions of 18% NaOH reacted for 90 min at 50 °C and 2% CTAC reacted for 60 min at 20 °C. The proposed modification method could be used for different materials to enhance the adsorption rate. The results of the contact angle test show that the modified straw changed from hydrophilic to hydrophobic, which may be the main reason for the improvement in the oil absorption rate. Finally, the surface structure of rice straw was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and N2 adsorption–desorption isotherms, which further confirmed the hydrophobicity of the modified rice straw.

A critical review of oil spills in the Niger Delta aquatic environment: causes, impacts, and bioremediation assessment

The Niger Delta region in South-South Nigeria, on Africa's West Coast, is densely populated. The region, which contains a substantial stock of crude oil and natural gas, has been nicknamed "the engine room" for Nigeria's economic development and progress. It is responsible for up to 90% of the country's economic growth (or gross domestic product/GDP). The region has multiple ecosystems, such as the aquatic environment, that are critical to the survival of the area's various habitats and living species. However, the same region has witnessed unjustifiable environmental pollution arising from oil activities over the years of exploration and production which has orchestrated negative consequences on the Niger Delta ecosystem. This has led to extended negative consequences on natural resources, which also have detrimental repercussions psychologically, ecologically, socially, economically, and physically which, in turn, impacts the overall health of the affected individuals. This write-up provides an overview of the major drivers of the oil leakage in Nigeria's Niger Delta ecosystem as well as the major impacts on the environment. It will also analyze numerous means of remediation in use and extend such for a more inclusive and productive option. Moreover, this review offers key measures that may help to maintain long-term policies for reducing adverse implications and increasing the living standard for the Niger Delta area's affected communities.

Reactive effects of pre-sowing magnetic field exposure on morphological characteristics and antioxidant ability of Brassica juncea in phytoextraction

As magnetic fields constantly act on living and biochemical processes, it is reasonable to hypothesize that magnetic field treatment of plant seeds would enhance the uptake capacity of non-essential elements. To verify this hypothesis, seeds of Brassica juncea were treated with 50, 100, 150, 200, and 400 mT fields, and the dry weight, Cd uptake capacity, ferritin content, antioxidant enzyme activity, and phytoremediation effects of the plant were compared at the end of the experiment. Relative to the control, low- and moderate-intensity fields (50-200 mT) enhanced the dry weight of plant leaves by 15.1%, 24.5%, 35.8%, and 49.1%, respectively, whereas the high-intensity field (400 mT) decreased the biomass yield by 18.9%. The content of Cd in the above-ground tissues of B. juncea enhanced with the increasing field intensity, accompanied by an increase in oxidative damage. The activities of superoxide dismutase (SOD) and ascorbate peroxidase (APX) increased with exposure to low (50 and 100 mT) and moderate (150 and 200 mT) intensities, followed by a reduction at a high intensity (400 mT). Catalase activity (CAT) and ferritin content exhibited an increasing trend with increasing intensity. The Cd decontamination index of B. juncea increased with the increasing magnetic field intensity until it reached a peak at 150 mT, after which the values remained constant. Considering the phytoremediation effect and energy consumption, 150 mT was the optimal scheme for magnetic-field-assisted phytoremediation using B. juncea. This study suggests that a suitable magnetic field can be regarded as an ecologically friendly physical trigger to improve the phytoextraction effect of B. juncea.

Floating treatment wetlands for the bioremediation of oil spills: A review

Conventional oil spill recovery may cause significant damage to shoreline habitats during the removal of oiled material and from human and equipment interaction. In addition, these methods are costly and can leave a significant amount of residual oil in the environment. Biological remediation strategies may be a less invasive option for recovering oil from sensitive regions, with potential to increase recovery. Floating treatment wetlands are a growing area of interest for biodegradation of oil facilitated by plant-bacterial partnerships. Plants are able to stimulate microbial colonization in the rhizosphere, creating greater opportunity for contaminant interaction and degradation. A literature review analysis revealed thirteen articles researching this topic, and found that floating treatment wetlands have high potential to degrade oil contaminants. In some instances, plants and inoculated bacteria exhibited the highest degradation potential, however, plants alone had higher degradation potential than bacteria alone. Research is needed to explore how floating treatment wetlands perform in field-based trials and under variable environmental conditions.

Duckweed Potential for the Phytoremediation of Linear Alkylbenzene Sulfonate (LAS): Identification of Some Intermediate Biodegradation Products and Evaluation of Antioxidant System

Duckweed (Lemna minor L.) has a high potential for wastewater treatment. Here, its capability for bioremoval of linear alkylbenzene sulfonate (LAS) as one of the primary contaminants of water resources was evaluated. The effect of some operational parameters on surfactant removal efficiency was determined. Also, the impact of LAS on several physiological responses of Lemna was investigated. LAS remediation efficiency of L. minor was elevated with increasing LAS concentration, duckweed weight, and temperature. Furthermore, the optimal pH for removal was 7-8.5. The benzenesulfonate ring and five homologs of sulfophenyl carboxylate were identified as intermediates in the LAS degradation pathway. A decrease in relative growth rate and pigment contents was observed by increasing LAS concentration. In contrast, an increase in hydrogen peroxide content and electrolyte leakage indicated oxidative stress by LAS. Induction of enzymatic/non-enzymatic antioxidants was observed during the surfactant remediation process, indicating their role in overcoming free radicals generated under surfactant stress.

Removal of Dinotefuran, Thiacloprid, and Imidaclothiz Neonicotinoids in Water Using a Novel Pseudomonas monteilii FC02-Duckweed (Lemna aequinoctialis) Partnership

Neonicotinoids (NEOs) are the most widely used insecticides in the world and pose a serious threat to aquatic ecosystems. The combined use of free-floating aquatic plants and associated microorganisms has a tremendous potential for remediating water contaminated by pesticides. The aim of this study was to determine whether plant growth-promoting bacteria (PGPB) could enhance the phytoremediation efficiency of duckweed (Lemna aequinoctialis) in NEO-contaminated water. A total of 18 different bacteria were isolated from pesticide-stressed agricultural soil. One of the isolates, Pseudomonas monteilii FC02, exhibited an excellent ability to promote duckweed growth and was selected for the NEO removal experiment. The influence of strain FC02 inoculation on the accumulation of three typical NEOs (dinotefuran, thiacloprid, and imidaclothiz) in plant tissues, the removal efficiency in water, and plant growth parameters were evaluated during the 14-day experimental period. The results showed that strain FC02 inoculation significantly (p < 0.05) increased plant biomass production and NEO accumulation in plant tissues. The maximum NEO removal efficiencies were observed in the inoculated duckweed treatment after 14 days, with 92.23, 87.75, and 96.42% for dinotefuran, thiacloprid, and imidaclothiz, respectively. This study offers a novel view on the bioremediation of NEOs in aquatic environments by a PGPB–duckweed partnership.

Optimizing floating treatment wetland and retention pond design through random forest: A meta-analysis of influential variables

Floating treatment wetlands (FTWs), artificial systems constructed from buoyant mats and planted with emergent macrophytes, represent a potential retrofit to enhance the dissolved nutrient removal performance of existing retention ponds. Treatment occurs as water flows through the dense network of roots suspended in the water column, providing opportunities for pollutants to be removed via filtration, sedimentation, plant uptake, and adsorption to biofilms in the root zone. Despite several recent review articles summarizing the growing body of research on FTWs, FTW design guidance and strategies to optimize their contributions to pollutant removal from stormwater are lacking, due in part to a lack of statistical analysis on FTW performance at the field scale. A meta-analysis of eight international FTW studies was performed to investigate the influence of retention pond, catchment, and FTW design characteristics on effluent concentrations of nutrients and total suspended solids (TSS). Random forest regression, a tree-based machine learning approach, was used to model complex interactions between a suite of predictor variables to identify design strategies for both retention ponds and FTWs to enhance treatment of nutrient and sediment. Results indicate that pond design features, especially loading ratio and pond depth (which should be limited to 200:1 and 1.75 m, respectively), are most influential to effluent water quality, while the benefits of FTWs were limited to improving mitigation of phosphorus species and TSS which was primarily influenced by FTW coverage and planting density. Findings from this work inform wet retention pond and FTW design, as well as guidance on scenarios where FTW implementation is most appropriate, to improve dissolved nutrient and sediment removal in urban runoff.

Phytoremediation of pollutants from wastewater: A concise review

As there is a global water crisis facing the whole world, it is important to find alternative solutions to treat wastewater for reuse. Hence, plants have an effective role in removing pollutants from wastewater, which has been emphasized in this review article. Biological treatment of wastewater can be considered an eco-friendly and cost-effective process that depends on in the future. Living organisms, including plants, can remediate pollutants in wastewater, especially in agricultural fields, such as dyes, heavy metals, hydrocarbons, pharmaceuticals, and pesticides. This review discusses the different activities of plants in pollutant elimination from wastewater and sheds light on the utilization of plants in this scope. This review focuses on the remediation of the most common contaminants present in wastewater, which are difficult to the removal with microorganisms, such as bacteria, fungi, and algae. Moreover, it covers the major role of plants in wastewater treatment and the potential of phytoremediation as a possible solution for the global water crisis.

Application of native plants in constructed floating wetlands as a passive remediation approach for PFAS-impacted surface water

Strategies for remediation of per- and polyfluoroalkyl substances (PFAS) generally prioritise highly contaminated source areas. However, the mobility of PFAS in the environment often results in extensive low-level contamination of surface waters across broad areas. Constructed Floating Wetlands (CFWs) promote the growth of plants in buoyant structures where pollutants are assimilated into plant biomass. This study examined the hydroponic growth of Juncus krausii, Baumea articulata and Phragmites australis over a 28-day period for remediation of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) contaminated (0.2 µg/L to 30 µg/L) urban stormwater. With increasing PFOA and PFOS concentrations, accumulation in plant species increased although root and shoot distribution varied depending on PFAS functional group. Less PFOA than PFOS accumulated in plant roots (0.006-0.16 versus 0.008-0.68 µg/g), while more PFOA accumulated in the plant shoots (0.02-0.55 versus 0.01-0.16 µg/g) indicating translocation to upper plant portions. Phragmites australis accumulated the highest overall plant tissue concentrations of PFOA and PFOS. The NanoSIMS data demonstrated that PFAS associated with roots and shoots was absorbed and not just surface bound. These results illustrate that CFWs have the potential to be used to reduce PFAS contaminants in surface waters.

Aerobic naphthenic acid-degrading bacteria in petroleum-coke improve oil sands process water remediation in biofilters: DNA-stable isotope probing reveals methylotrophy in Schmutzdecke

There is an increasing interest in treatment of oil sands process water (OSPW) via biofiltration with petroleum coke (PC) as a substratum. In fixed bed biofilters (FBBs) with PC, the dominance of anaerobic digestion of dissolved organics results in poor removal of naphthenic acids (NAs) along with a high degree of methanogenesis. In this study, the operation of FBBs was modified to improve OSPW remediation by supporting the filtering bed with aerobic naphthenic acid-degrading bacteria treating aerated OSPW (FBB_{bioaugmentation}). The results were compared with a biofilter operated under controlled conditions (FBB_control). To this end, a consortium of three aerobic NAs-degrading bacterial strains was immobilized on PC as a top layer (10 cm). These bacteria were pre-screened for growth on 15 different NAs surrogates as a sole carbon source, and for the presence of catabolic genes coding alkane hydroxylase (CYP153) and alkane monooxygenase (alkB) enzymes. The results illustrated that biofiltration in FBB_{bioaugmentation} removed 32% of classical NAs in 15 days; while in the FBB_control, degradation was limited to 19%. The degradation of fluorophore (aromatic) compounds was also improved from 16% to 39% for single ring (O_I), 22% to 29% for double ring (O_II), and 15% to 23% for three rings (O_III) compounds. DNA-Stable Isotope Probing revealed that potential hydrocarbons degraders such as Pseudomonas (inoculated), Pseudoxanthomonas (indigenous) were present up to 9.0% in the ¹³C-labelled DNA fraction. Furthermore, a high abundance of methylotrophs was observed in the Schmutzdecke, with Methylobacillus comprising more than two-third of the total community. This study shows that bioaugmentation rapidly improved OSPW remediation. Aeration mostly contributed to methane consumption in the top layer, thus minimizing its release into the environment.

Operational parameters optimization for remediation of crude oil-polluted water in floating treatment wetlands using response surface methodology

The application of floating treatment wetlands (FTWs) is an innovative nature-based solution for the remediation of polluted water. The rational improvement of water treatment via FTWs is typically based on multifactorial experiments which are labor-intensive and time-consuming. Here, we used the response surface methodology (RSM) for the optimization of FTW's operational parameters for the remediation of water polluted by crude oil. The central composite design (CCD) of RSM was used to generate the experimental layout for testing the effect of the variables hydrocarbon, nutrient, and surfactant concentrations, aeration, and retention time on the hydrocarbon removal in 50 different FTW test systems planted with the common reed, Phragmites australis. The results from these FTW were used to formulate a mathematical model in which the computational data strongly correlated with the experimental results. The operational parameters were further optimized via modeling prediction plus experimental validation in test FTW systems. In the FTW with optimized parameters, there was a 95% attenuation of the hydrocarbon concentration, which was very close to the 98% attenuation predicted by the model. The cost-effectiveness ratio showed a reduction of the treatment cost up to $0.048/liter of wastewater. The approach showed that RSM is a useful strategy for designing FTW experiments and optimizing operational parameters.

Mangrove's rhizospheric engineering with bacterial inoculation improve degradation of diesel contamination

Mangroves (Avicennia marina) growing in intertidal areas are often exposed to diesel spills, adversely damaging the ecosystem. Herein, we showed for the first time that mangrove seedlings' associations with bacteria could reprogram host-growth, physiology, and ability to degrade diesel. We found four bacterial strains [Sphingomonas sp.-LK11, Rhodococcus corynebacterioides-NZ1, Bacillus subtilis-EP1 Bacillus safensis-SH10] exhibiting significant growth during diesel degradation (2% and 5%, v/v) and higher expression of alkane monooxygenase compared to control. This is in synergy with reduced long-chain n-alkanes (C24-C30) during microbe-diesel interactions in the bioreactor. Among individual strains, SH10 exhibited significantly higher potential to improve mangrove seedling's morphology, anatomy and growth during diesel treatment in rhizosphere compared to control. This was also evidenced by reduced activities and gene expression of antioxidant enzymes (catalases, peroxidases, ascorbic peroxidases, superoxide dismutases and polyphenol peroxidases) and lipid peroxidation during microbe-diesel interactions. Interestingly, we noticed significantly higher soil-enzyme activities (phosphatases and glucosidases) and essential metabolites in seedling's rhizosphere after bacteria and diesel treatments. Degradation of longer n-alkane chains in the rhizosphere also revealed a potential pathway that benefits mangroves by bacterial strains during diesel contaminations. Current results support microbes' application to rhizoengineer plant growth, responses, and phytoextraction abilities in environments contaminated with diesel spills. AVAILABILITY OF DATA AND MATERIALS: The datasets generated during the current study are available in the NCBI GenBank ((https://www.ncbi.nlm.nih.gov).

Enhancement of the Cd phytoremediation efficiency of Festuca arundinacea by sonic seed treatment

It has been reported that both naturally occurring and artificially created sounds can alter the physiological parameters of various plants. A series of experiments were designed in the present study to estimate the physiological responses and the variation in the Cd decontamination capacity of Festuca arundinacea under sonic wave treatments. Plant seeds were treated by sound waves of frequency 200, 300, 400, 500, and 1000 Hz, and the germinated seedlings were transplanted to Cd-polluted soil. The results showed that all the sonic treatments increased the whole plant dry weight of F. arundinacea compared with that of the control, and the highest value was observed in the 200 Hz treatment. The Cd content in below-ground and aerial tissues of the species increased with increasing frequency till 400 Hz, after which they became constant. A higher proportion of senescent and dead leaf tissues was observed in the high-frequency treatment (1000 Hz), and more Cd was transferred to these failing tissues. Therefore, in the 1000 Hz treatment, a significantly greater amount of Cd could be eliminated by harvesting the senescent and dead leaf tissues of the species compared with that of the other treatments. The concentrations of dissolved organic matter (DOM) and the proportions of hydrophilic fractions which have a strong Cd affinity, in the rhizosphere soil of F. arundinacea increased with the increase in sound frequency. Cd extraction ability of DOM also increased with increasing frequency. This study indicated that a suitable sonic treatment can improve the phytoextraction efficiency of F. arundinacea, and also explained the mechanism from the perspective of the variations in soil DOM.

Enhanced degradation of hydrocarbons in constructed wetlands aided with nutrients, surfactant, and aeration

The use of constructed wetlands (CWs) is a promising approach for the remediation of hydrocarbon-polluted wastewater. The amendments of CWs with nutrients, surfactants, and aeration enhances the removal of pollutants from wastewater. The objective of the present study was to explore the effect of external stimulants, i.e., nutrients, surfactant, and aeration on hydrocarbons degradation potential of CWs. The CWs mesocosms were developed by the vegetation of Phragmites australis and amendments with nutrients (20 mg l^-1 N, 2.6 mg l^-1 P, and 16.4 mg l^-1 K), surfactant Tween 20 (0.2%, v/v), and aeration (7 mg l^-1) for the remediation of diesel-spiked water (2%, w/v). The comparative analysis showed that the addition of nutrients, surfactant, and aeration individually enhanced total petroleum hydrocarbons (TPHs) reduction, and maximum TPHs reduction (88.4%) was achieved after 60 days in the mesocosms amended with the combination of nutrients, surfactant, and aeration. Among different individual treatments, the aeration (alone) also played a pivotal role in TPHs reduction (61%). The least (12%) reduction in TPHs was achieved in the mesocosms supplied with surfactant only. This study revealed that the combined application of nutrients, surfactant, and aeration in CWs enhanced its hydrocarbons degradation performance.

Investigating degradation metabolites and underlying pathway of azo dye "Reactive Black 5" in bioaugmented floating treatment wetlands

The direct discharge of azo dyes and/or their metabolites into the environment may exert toxic, mutagenic, and carcinogenic effects on exposed fauna and flora. In this study, we analyzed the metabolites produced during the degradation of an azo dye namely Reactive Black 5 (RB5) in the bacterial-augmented floating treatment wetlands (FTWs), followed by the investigation of their underlying toxicity. To this end, a FTWs system was developed by using a common wetland plant Phragmites australis in the presence of three dye-degrading bacteria (Acinetobacter junii strain NT-15, Pseudomonas indoloxydans strain NT-38, and Rhodococcus sp. strain NT-39). We found that the FTW system effectively degraded RB5 into at least 20 different metabolites with the successful removal of color (95.5%) from the water. The fish toxicity assay revealed the nontoxic characteristics of the metabolites produced after dye degradation. Our study suggests that bacterially aided FTWs could be a suitable option for the successful degradation of azo dyes, and the results presented in this study may help improve the overall textile effluent cleanup processes.

Recent developments and applications of floating treatment wetlands for treating different source waters: a review

Most water bodies around the world suffer from pollution to varying degrees. Floating treatment wetlands (FTWs) are a simple and efficient ecological treatment technology and have been widely studied and applied as a sustainable solution for different source waters. Based on the analysis of abundant literature in the last ten years, this paper systematically reviews the history and the latest development of FTWs. Meanwhile, the treatment performance and pollutant removal mechanisms of FTWs on the natural water, stormwater, domestic wastewater, industrial wastewater, and agricultural runoff are analyzed. In particular, very interesting information is provided, such as water depth, water surface coverage, the ratio of dissolved to total phosphorous (DRP/TP), the ratio of nitrogen to phosphorous (N/P), BOD/COD ratio, and its effects on the efficiency and removal mechanisms of FTWs. This information will provide useful references and guidance for optimizing the design of FTW and pollutant treatment efficiency of different source waters. This paper also provides an objective review of the limitations of FTWs. Subsequently, the enhancements of FTW technology which are recognized to be effective, including aeration, adding functional fillers or obligate degrading bacteria, and construction of hybrid FTWs, are summarized and recommendations are made for further research.

Enhanced phosphorus removal of constructed wetland through plant growth-promoting rhizobacteria (PGPR) addition

Phosphorus (P) removal efficiency of constructed wetland (CW) was limited due to the adsorption saturation on substrate surface along with continuous operation of CW. This study attempted to improve the P removal of CW through introduction of plant growth-promoting rhizobacteria (PGPR). Compared with the control-CW (C-CW), the results of CW with bio-augmentation (B-CW) showed that the total phosphorus (TP) removal efficiency was increased by 36.7% due to the enhanced plant uptake of P. The physiology indicators (height and root activity) of plants in B-CW were significantly improved, and the average P content of plants in B-CW was 0.78 g/kg, which was 85.7% higher than that of C-CW (0.42 g/kg). This was because PGPR addition optimized the P forms adsorbed on substrate surface and increased the proportion of Ca/Mg-P which was bioavailable for plant growth, and then subsequently enhanced plant uptake of P. Through bio-augmentation, the proportion of P removal by plant uptake in B-CW (25.2%) was increased by 2.5 times compared with that of C-CW (7.1%). The outcomes of this study would shed light on intensifying the role of plant uptake in P removal of CWs through bio-augmentation.

Bacterial bioaugmentation enhances hydrocarbon degradation, plant colonization and gene expression in diesel-contaminated soil

Environmental contamination by hydrocarbons is a major problem, and hydrocarbon accumulation in soil poses hazardous threat to ecosystems. Phytoremediation, which involves plants, is an encouraging technique for the removal of hydrocarbons from polluted soil and water. The purpose of this investigation was to examine whether bacterial inoculation enhanced the phytoremediation of hydrocarbons in diesel-contaminated soil vegetated with maize (Zea mays L.). The two cultivars of maize, MMRI Yellow and Pearl White, were planted in diesel-polluted soil (0, 1.5, 2.5, and 3.5 g diesel kg^-1 soil), and inoculated with the consortium of three alkane-degrading bacterial strains, Arthrobacter oxydans ITRH49, Pseudomonas sp. ITRI73 and Pseudomonas sp. MixRI75. Bacterial inoculation enhanced plant growth and hydrocarbon degradation. Between two cultivars, MMRI Yellow showed better growth and hydrocarbon degradation in the presence and absence of bacterial inoculation. Maximum hydrocarbon degradation (80%) was observed in the soil having minimum concentration of diesel (1.5 g kg^-1 soil), and vegetated with bacterial inoculated MMRI Yellow maize cultivar. Furthermore, more bacterial colonization, and abundance and expression of the alkane hydroxylase gene (alkB) were observed in the root interior than in the rhizosphere and shoot interior of the plants. The bacteria-mediated phytoremediation of soil contaminated with hydrocarbons suggested that the collective use of plants and bacteria was the most beneficial approach for the reclamation of diesel-contaminated soil in comparison with vegetation alone.

Remediation of Petroleum-Contaminated Soils with Microbial and Microbial Combined Methods: Advances, Mechanisms, and Challenges

The petroleum industry’s development has been supported by the demand for petroleum and its by-products. During extraction and transportation, however, oil will leak into the soil, destroying the structure and quality of the soil and even harming the health of plants and humans. Scientists are researching and developing remediation techniques to repair and re-control the afflicted environment due to the health risks and social implications of petroleum hydrocarbon contamination. Remediation of soil contamination produced by petroleum hydrocarbons, on the other hand, is a difficult and time-consuming job. Microbial remediation is a focus for soil remediation because of its convenience of use, lack of secondary contamination, and low cost. This review lists the types and capacities of microorganisms that have been investigated to degrade petroleum hydrocarbons. However, investigations have revealed that a single microbial remediation faces difficulties, such as inconsistent remediation effects and substantial environmental consequences. It is necessary to understand the composition and source of pollutants, the metabolic genes and pathways of microbial degradation of petroleum pollutants, and the internal and external aspects that influence remediation in order to select the optimal remediation treatment strategy. This review compares the degradation abilities of microbial–physical, chemical, and other combination remediation methods, and highlights the degradation capabilities and processes of the greatest microbe-biochar, microbe–nutrition, and microbe–plant technologies. This helps in evaluating and forecasting the chemical behavior of contaminants with both short- and long-term consequences. Although there are integrated remediation strategies for the removal of petroleum hydrocarbons, practical remediation remains difficult. The sources and quantities of petroleum pollutants, as well as their impacts on soil, plants, and humans, are discussed in this article. Following that, the focus shifted to the microbiological technique of degrading petroleum pollutants and the mechanism of the combined microbial method. Finally, the limitations of existing integrated microbiological techniques are highlighted.

The application of steel slag in a multistage pond constructed wetland to purify low-phosphorus polluted river water

To investigate the effect of a constructed wetland (CW) with steel slag as the filler on water contaminated by low phosphorus levels, a multistage pond CW system was designed in this study. Low-phosphorus polluted river water was used as the research object. This study explored the effects of using steel slag as a CW filler on phosphorus removal and the total phosphorus (TP) purification effect of the wetland system. The results showed that the TP removal rates in the ecological pond, oxidation pond, surface flow wetlands and submerged plant pond were 5.17%, 8.02%, 21.56%, and 16.31%, respectively. Intermittent increases in phosphorus concentration were observed in the reactors and were caused by the decay of plant tissues, which released pollutants. Because steel slag was added to the filler, the TP concentrations in the effluent of the first- and second-level horizontal subsurface CWs increased by 151.13% and 16.29%, respectively, compared to the influent concentration. The 20th to 40th days of the test run was a period of rapid phosphorus release of the system. The use of steel slag has a potential risk of phosphorus release when applied in CWs used to purify low-phosphorus contaminated water bodies.

Genomic insights into Pseudoalteromonas sp. JSTW coping with petroleum-heavy metals combined pollution

Worldwide marine compound contamination by petroleum products and heavy metals is a burgeoning environmental concern. Pseudoalteromonas, prevalently distributed in marine environment, has been proven to degrade petroleum and plays an essential role in the fate of oil pollution under the combined pollution. Nevertheless, the research on the reference genes is still incomplete. Therefore, this study aims to thoroughly investigate the reference genes represented by Pseudoalteromonas sp. JSTW via whole-genome sequencing. Next-generation sequencing technology unfolded a genome of 4,026,258 bp, database including Clusters of Orthologous Groups (COG) and Kyoto Encyclopedia of Genes and Genomes (KEGG) were utilized to annotate the genes and metabolic pathways conferring to petroleum hydrocarbon degradation. The results show that common alkane and aromatic hydrocarbon degradation genes (alkB, ligB, yqhD, and ladA), chemotaxis gene (MCP, cheA, cheB, pcaY, and pcaR), heavy-metal resistance, and biofilm genes (σ54, merC, pcoA, copB, etc.) were observed in whole-genome sequence (WGS) of JSTW, which indicated that strain JSTW could potentially cope with combined pollution. The degradation efficiency of naphthalene in 60 h by JSTW was 99% without Cu²⁺ and 67% with 400 mg L^-1 Cu²⁺ . Comparative genome analysis revealed that genomes of Pseudoalteromonas lipolytica strain LEMB 39 and Pseudoalteromonas donghaensis strain HJ51 shared similarity with strain JSTW, suggesting they are also the potential degradater of petroleum hydrocarbons under combined pollution. Therefore, this study provides a WGS annotation and reveals the mechanism of response to combined pollution of Pseudoalteromonas sp. JSTW.

Application of floating treatment wetlands for stormwater runoff: A critical review of the recent developments with emphasis on heavy metals and nutrient removal

Floating treatment wetlands (FTWs) are increasingly gaining popularity due to a set of valuable features like wastewater remediation under varied conditions, ecosystem quality preservation, landscape conservation, and aesthetic benefits. FTW is a phyto-technology in which macrophytes grow on a floating raft with their roots in permanent contact with water and remove pollutants via several physicochemical-biological processes. FTW is highly capable of overcoming technical and operational challenges that come way in stormwater treatment due to the erratic nature of hydrologic and input pollutant loads because this innovative buoyant hydroponic design can move up and down with fluctuating water levels in the stormwater pond and can treat highly variable flows. Plants and biofilms attached to the roots hanging beneath the floating mat play a pivotal role in FTWs. The present review encompasses the concept of FTWs, their structural designs, relevance in stormwater management, and mechanism of plant uptake for pollutant removal. The role of FTWs to remove heavy metals and nutrients is also critically analyzed. Understanding hydraulics and other parameters of FTW is vital to effective design. Hence, the role of vegetation coverage, vegetation type, sorption media, aeration frequency, and intensity, and plant density to enhance system efficiency is also highlighted. Due to their operational flexibility and environmentally friendly working with no additional burden on existing urban land use, FTWs entice broad international interest and offer a coherent solution for stormwater management. MAIN FINDINGS: The review delivers state-of-the-art analysis of the current understanding of hydraulics and other parameters of FTWs, and associated mechanisms to enhance the treatment efficiency of FTWs for nutrients and heavy metals removal.

Bioaugmentation of treatment wetlands - A review

Bioaugmentation in the form of artificial mycorrhization of plant roots and bacterial inoculation has been successfully implemented in several fields including soil remediation or activated sludge treatment. Likewise, bioaugmentation seems a promising approach to improve the functioning of treatment wetlands, considering that natural mycorrhization has been detected in treatment wetlands and that bacteria are the main driver of contaminant degradation processes. However, to date, full scale implementation seems to be rare. This review synthesizes the effects of bioaugmentation on different types of treatment wetlands, to a large extent performed on a microcosm (<0.5 m²) or mesocosm scale (0.51 to 5 m²). While inoculation with arbuscular mycorrhizal fungi tended to show a positive effect on the growth of some wetland plants (e.g. Phragmites australis), the mechanisms underlying such positive effects are not well understood and the effects of upscaling to full scale treatment wetlands remain unknown. Bacterial inoculation tended to promote plant growth and pollutant degradation, but longer term data is required.

Effect of design and operational parameters on nutrients and heavy metal removal in pilot floating treatment wetlands with Eichhornia Crassipes treating polluted lake water

Though having an economic and ecological impact on Marriott Lake management in Egypt, water hyacinth (Eichhornia crassipes) is an aquatic floating macrophyte with a known phytoremediation potential. In order to assess its remediation potential, pilot floating treatment wetlands (FTWs) with E. crassipes were built in duplicates to evaluate the removal of nutrients and heavy metals from the polluted lake water. The experimental design included units with different water depths (15, 25, and 35 cm; D₁₅, D_25, and D₃₅, respectively) and plant coverage (90, 70, 50, and 0%; P₉₀, P₇₀, P_50, and P₀, respectively). The pilot FTWs were monitored over a 7-day operation cycle to identify the optimum combination of design (plant coverage, water depth) and operation (hydraulic retention time; HRT) parameters needed for maximum BOD₅, TN, NH₄-N, and TP removal. NH₄-N removal reached 97.4% in the D₂₅P₅₀ unit after 3 days, BOD₅ 75% in the D₁₅P₉₀ after 3 days, TN 82% in the D₂₅P₇₀ after 4 days, and TP 84.2% in the D₃₅P₇₀ after 4 days. The open-water evaporation rate was higher than the evapotranspiration rate in the planted units, probably due to the warm climate of the study area. Metals were also sufficiently removed through bioaccumulation in plant tissues in the order of Fe > Pb > Cu > Ni (62.5%, 88.9%, 81.7%, and 80.4% for D₂₅P₅₀, D₂₅P₇₀, D₂₅P₅₀, and D₂₅P₉₀, respectively), while most of the assimilated metal mass was translocated to the plant roots. The biochemical composition of the plant tissue was significantly different between the shoot and root parts. Overall, the FTW with 70% E. crassipes coverage, 25-cm water depth, and an HRT of 3-5 days was identified as the optimum design for effective remediation of the polluted Marriott Lake in Egypt.

How to enhance the purification performance of traditional floating treatment wetlands (FTWs) at low temperatures: Strengthening strategies

Pollution of freshwaters poses a major threat to water quality and human health and thus, nutrients have been targeted for mitigation. One such control measure is floating treatment wetlands (FTWs), which are designed to employ vigorous macrophytes above the water surface and extensive plant root system below the water surface to increase plant uptake of nutrients. The efficacy of FTWs in purifying different water systems has been widely studied and reviewed, but most studies have been performed in warm periods when FTW macrophytes are actively growing. In low-temperature conditions, the metabolic processes of macrophytes and microbial activity are usually weakened or reduced by the winter months and are not actively assimilating pollutants. These circumstances hamper the purification ability of FTWs to perform as designed. Furthermore, decayed macrophytes could release pollutants into the water column. Hence, this paper aimed to systematically summarize strategies for use of enhanced FTWs in eutrophic water improvement at low temperature and identify future directions to be addressed in intensifying FTW performance in low-temperature conditions. Low-temperature FTW show variable nutrient removal efficiencies ranging from 22% to 98%. Current amendments to enhance FTW purification performance, ranging from direct strategies for internal components to indirect enhancement of external operation environments encourage the FTW efficacy to some extent. However, the sustainability and sufficiency of water purification efficiency remain a great challenge. Keeping in mind the need for optimizing the FTW components and dealing with high organic and inorganic chemicals, future research should be carried out at the large field-scale and focus on macrophyte- benthos- microorganism synergistic enhancement, breeding of cold-tolerant macrophytes, and combination of FTWs with many strategies, as well as rational design and operational approaches under cold conditions.

Performance and bacterial community dynamics of hydroponically grown Iris pseudacorus L. during the treatment of antibiotic-enriched wastewater at low/normal temperature

Antibiotics are widely detected in the water environment, posing a serious threat to the health of humans and animals. The effect of levofloxacin (LOFL) on pollutant removal and the difference in the influence mechanisms at normal and low temperatures in constructed wetlands are worth discussing. A hydroponic culture experiment was designed with Iris pseudacorus L. at low and normal temperatures. LOFL (0-100 µg/L) was added to the systems. The results indicated that the removal of pollutants was affected most by temperature, followed by LOFL concentration. At the same concentration of LOFL, the pollutant removal rate was significantly higher at normal temperature than at low temperature. Low concentrations of LOFL promoted the degradation of pollutants except TN under normal-temperature conditions. Compared with the results at low temperature, the bacterial community richness was higher and the diversity of bacterial communities was lower under normal-temperature conditions. The genera and the function of bacteria were greatly affected by antibiotic concentration, temperature and test time. A series of microorganisms resistant to antibiotics and low temperature were identified in this study. The results will provide valuable information and a reference for our understanding of the ecological effects of LOFL.

Immobilization of Rhodococcus qingshengii strain FF on the surface of polyethylene and its adsorption and biodegradation of mimic produced water

Low pH and high salinity characteristic of produced water (PW) posed a big challenge for the direct biological treatment. The immobilization of R. qingshengii strain FF, which degraded petroleum effectively under low pH, and application of immobilized R. qingshengii strain FF in treating mimic PW was studied in this work. The immobilization of R. qingshengii strain FF on the surface of polyethylene foam (PEF), one type of waste packaging materials, was optimized using the response surface methodology. Under optimum conditions, cell density of R. qingshengii strain FF immobilized on the surface of PEF reached 388 mg (cells)/g(PEF). In addition, a few factors, including hydraulic retention time (HRT), pH and salinity, were studied for treating mimic PW using immobilized R. qingshengii strain FF. The result of this study demonstrated that TPH degradation efficiency of PW by immobilized R. qingshengii strain FF reached above 90% when HRT was longer than 8 h. Weak acid and high salinity conditions only moderately decreased TPH. Asphalt, alkanes and aromatic hydrocarbon contained in petroleum can be degraded to some extent. These results indicated that immobilized R. qingshengii strain FF can be used as a highly efficient strain which could be used in biological treatment of real PW.

Bioremediation of Diesel Contaminated Marine Water by Bacteria: A Review and Bibliometric Analysis

Oil pollution can cause tremendous harm and risk to the water ecosystem and organisms due to the relatively recalcitrant hydrocarbon compounds. The current chemical method used to treat the ecosystem polluted with diesel is incompetent and expensive for a large-scale treatment. Thus, bioremediation technique seems urgent and requires more attention to solve the existing environmental problems. Biological agents, including microorganisms, carry out the biodegradation process where organic pollutants are mineralized into water, carbon dioxide, and less toxic compounds. Hydrocarbon-degrading bacteria are ubiquitous in the nature and often exploited for their specialty to bioremediate the oil-polluted area. The capability of these bacteria to utilize hydrocarbon compounds as a carbon source is the main reason behind their species exploitation. Recently, microbial remediation by halophilic bacteria has received many positive feedbacks as an efficient pollutant degrader. These halophilic bacteria are also considered as suitable candidates for bioremediation in hypersaline environments. However, only a few microbial species have been isolated with limited available information on the biodegradation of organic pollutants by halophilic bacteria. The fundamental aspect for successful bioremediation includes selecting appropriate microbes with a high capability of pollutant degradation. Therefore, high salinity bacteria are remarkable microbes for diesel degradation. This paper provides an updated overview of diesel hydrocarbon degradation, the effects of oil spills on the environment and living organisms, and the potential role of high salinity bacteria to decontaminate the organic pollutants in the water environment.

Plant species for floating treatment wetlands: A decade of experiments in North Italy

Floating treatment wetlands (FTWs) represent a recent system within the family of surface flow wetlands, able to directly treat various types of wastewaters in natural or artificial water bodies. In these conditions, traditional non-floating macrophytes, installed in self-buoyant mats, hydroponically expand their root systems in the wastewater, interacting with a rich microbial biodiversity and thereby removing different pollutants. This study aimed to evaluate the growth performances of 5 plant species installed in different FTWs after ten years of research conducted in North Italy: Phragmites australis, Iris pseudacorus, Typha latifolia, Carex spp. and Lythrum salicaria. During the entire experimental period, above-mat biomass production varied from 46.7 g m^-2 (L. salicaria) to 1466.0 g m^-2 (T. latifolia), whereas below-mat biomass production ranged between 205.7 g m^-2 (L. salicaria) and 4331.1 g m^-2 (P. australis). Both shoot height and root length assumed the highest values for T. latifolia (189.0 cm and 59.3 cm, respectively), the lowest for L. salicaria (42.3 cm and 35.1 cm, respectively). All plant species increased both above- and below-mat biomass productions over consecutive growing seasons through horizontal colonization of the floating mats, although not always significantly. Moreover, the growth of I. pseudacorus, P. australis and T. latifolia was significantly influenced by wastewater physico-chemical composition, exhibiting species-specific behavior. In general, all species showed a good aptitude to survive in hydroponic conditions both during the growing season and the winter, even though in a few cases the survival of I. pseudacorus and P. australis was strongly reduced by alien predators (Myocastor coypus) that badly damaged plant aerial tissues.

Effects of salinity on the treatment of synthetic petroleum-industry wastewater in pilot vertical flow constructed wetlands under simulated hot arid climatic conditions

Petroleum-industry wastewater (PI-WW) is a potential source of water that can be reused in areas suffering from water stress. This water contains various fractions that need to be removed before reuse, such as light hydrocarbons, heavy metals and conditioning chemicals. Constructed wetlands (CWs) can remove these fractions, but the range of PI-WW salinities that can be treated in CWs and the influence of an increasing salinity on the CW removal efficiency for abovementioned fractions is unknown. Therefore, the impact of an increasing salinity on the removal of conditioning chemicals benzotriazole, aromatic hydrocarbon benzoic acid, and heavy metal zinc in lab-scale unplanted and Phragmites australis and Typha latifolia planted vertical-flow CWs was tested in the present study. P. australis was less sensitive than T. latifolia to increasing salinities and survived with a NaCl concentration of 12 g/L. The decay of T. latifolia was accompanied by a decrease in the removal efficiency for benzotriazole and benzoic acid, indicating that living vegetation enhanced the removal of these chemicals. Increased salinities resulted in the leaching of zinc from the planted CWs, probably as a result of active plant defence mechanisms against salt shocks that solubilized zinc. Plant growth also resulted in substantial evapotranspiration, leading to an increased salinity of the CW treated effluent. A too high salinity limits the reuse of the CW treated water. Therefore, CW treatment should be followed by desalination technologies to obtain salinities suitable for reuse. In this technology train, CWs enhance the efficiency of physicochemical desalination technologies by removing organics that induce membrane fouling. Hence, P. australis planted CWs are a suitable option for the treatment of water with a salinity below 12 g/L before further treatment or direct reuse in water scarce areas worldwide, where CWs may also boost the local biodiversity. Graphical abstract.

Assessing the impact of vegetation coverage ratio in a floating water treatment bed of Pistia stratiotes

Floating bed (FB) is one of the low cost and efficient system to treat polluted water bodies in rural as well as urban area. It requires less space compared to other macrophyte based treatment system. Vegetation coverage is an effective factor as atmospheric oxygen diffusion to water body depends upon this. When a water body is fully covered by vegetation, it prevents the diffusion of atmospheric oxygen, which is a major source of dissolved oxygen (DO). An optimum vegetation coverage is necessary to obtain maximum treatment efficiency and to verify this a laboratory scale experiment was performed with various vegetation coverage ratio (VCR) of 0, 0.25, 0.5, 0.75, 1. Organics and nutrient removal were measured corresponding to initial floating bed VCR. COD removal for VCR 1.0, 0.75, 0.5, 0.25 and 0 were 86.4%, 93.6%, 96.2%, 85.4% and 60.8%, respectively. The roots of macrophyte (Pistia stratiotes) supports growth of microorganism, which perform biodegradation of organics as well as uptake nutrients. Maximum NH4+-N and PO43−-P removal were observed at VCR of 0.75 and 1.0, respectively. In the tanks with VCR of 0.25, 0.5 and 0.75, the final DO was more than 4 mg/L, which is the requisite DO value for survival of aquatic organism.

Novel Magnetic Nano Silica Synthesis Using Barley Husk Waste for Removing Petroleum from Polluted Water for Environmental Sustainability

Water contamination by petroleum and its byproducts presents a major challenge worldwide. It is critical that sustainable treatment methods be employed for the removal of such contaminants from polluted water. For this investigation, magnetic nano silica (M-NS) was synthesized using agricultural waste from barley husk using a two-step process that is environmentally friendly and uses green chemistry synthesis. The barley husk waste was used as a precursor for the synthesis of nano-silica following a low energy and sustainable method of acid reflux and heat treatment. Nano-silica was then used for the synthesis of M-NS, with the addition of a magnetic solution of Fe3O4 nanoparticles. The magnetic nano-silica particles were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), Zeta potential analysis (ZETA) and X-Ray Diffraction (XRD). Magnetic nano-silica particles were observed to have an average diameter of 162 nm and appeared to be hydrophobic, with a large surface area of ~120 m2/gm. Due to these characteristics, magnetic nano-silica was used as an adsorbent for the removal of petrol contaminants from water. The experimental procedure showed that only 0.6 gm. of M-NS was used on 40 mg/L concentration of petroleum and the experiments recorded a high uptake efficiency of 85%. The sorption was shown to be an effective process since a high amount of petroleum was removed. The study further demonstrates that as the amount of sorbent is increased, the sorption capacity also increases until an equilibrium is reached. The results of this study establish that synthesis of M-NS, using environmentally sustainable processes, has the required characteristics to serve as sorbent for petroleum and its byproducts from contaminated water, thus enhancing environmental sustainability.