Removal of fluoroquinolone antibiotics using actinia-shaped lignin-based adsorbents: Role of the length and distribution of branched-chains

A newly NH2-UiO-66 composite functionalized by molecularly imprinted polymer for selective and rapid removal of sulfamethoxazole

Metal-organic frameworks (MOFs) are used as novel adsorption materials owing to their large surface area and tunable pore size. However, the lack of selectivity considerably limits their application. Consequently, designing functionalized MOFs with specific recognition abilities is essential for enhancing their adsorption performance. Herein, we synthesized a functionalized NH2-UiO-66 composite modified by molecularly imprinted polymers (MIP@NH2-UiO-66) via a one-step polymerization process in which NH2-UiO-66 and MIP were formed simultaneously. Results demonstrate that MIP@NH2-UiO-66 effectively recognized sulfamethoxazole (SMX) in complex matrices. The adsorption equilibrium was reached in only 30 min, and this fast SMX adsorption on MIP@NH2-UiO-66 was described by the Avrami kinetic model, which indicates a spontaneous and exothermic adsorption process. Within the pH range of 3.0-10.0, MIP@NH2-UiO-66 exhibited an optimal binding capacity for SMX, and the maximum adsorption of SMX was 68.36 mg g-1 at 25°C, which exceeded those of existing adsorption materials (< 60.10 mg g-1). Additionally, MIP@NH2-UiO-66 was regenerated for ∼17 cycles compared to less than eight cycles for the other adsorbents. MIP@NH2-UiO-66 effectively removed 90.58%-99.60% of SMX from river water, rainwater, soil, sediment, chicken, pork, and milk samples, with a relative standard deviation of less than 4.43%. The superior adsorption of SMX on MIP@NH2-UiO-66 was primarily driven by the synergistic effects of the imprinting sites, hydrogen bonding, and electrostatic forces. The one-step polymerization method substantially simplified the synthesis process and reduced the costs, which are promising factors for the synthesis of MOFs with high selectivity.

Natural phenol-inspired porous polymers for efficient removal of tetracycline: Experimental and engineering analysis

Efficient and feasible removal of trace antibiotics from wastewater is extremely important due to its environmental persistence, bioaccumulation, and toxicity, but still remains a huge challenge. Herein, three natural phenol-inspired porous organic polymers were fabricated from natural phenolic-derived monomers (p-hydroxy benzaldehyde, 2,4-dihydroxy benzaldehyde and 2,4,6-trihydroxy benzaldehyde) and melamine via polycondensation reaction. Characterization highlighted that the increasing contents of hydroxyl groups in monomers induced an increase of the polymer total porosity and promoted the formation of a highly microporous structure. With mesopore-dominated pore (average pore diameter 9.6 nm) and large pore volume (1.78 cm³/g), p-hydroxy benzaldehyde-based porous polymer (1-HBPP) exhibited ultra-high maximum adsorption capacity (q_max) of 697.6 mg/g for tetracycline (TC) antibiotic. Meanwhile, the porous networks and plentiful active sites of 1-HBPP enabled fast adsorption kinetics (within 10 min) for TC removal, which could be well described by the pseudo-second-order model. Dynamic adsorption studies showed that 1-HBPP could be used in fixed-bed adsorption column (FBAC) with high removal efficiency (breakthrough volume per unit mass, 13.2 L/g) and dynamic adsorption capacity (201.6 mg/g), which were much higher than other reported adsorbents. The breakthrough curves both well matched with Thomas and Yoon-Nelson models in FBAC treatment. Moreover, removal mechanism analysis affirmed that pore-filling, hydrogen bonding, electrostatic interactions and π-π stacking interactions were main driving forces for TC adsorption. The prepared natural phenol-inspired porous adsorbents show great potential in antibiotics removal from wastewater, and this strategy would promote the sustainable and high-value utilization of natural phenolic compounds.

Challenges in developing strategies for the valorization of lignin-a major pollutant of the paper mill industry

Apart from protecting the environment from undesired waste impacts, wastewater treatment is a crucial platform for recovery. The exploitation of suitable technology to transform the wastes from pulp and paper industries (PPI) to value-added products is vital from an environmental and socio-economic point of view that will impact everyday life. As the volume and complexity of wastewater increase in a rapidly urbanizing world, the challenge of maintaining efficient wastewater treatment in a cost-effective and environmentally friendly manner must be met. In addition to producing treated water, the wastewater treatment plant (WWTP) has a large amount of paper mill sludge (PMS) daily. Sludge management and disposal are significant problems associated with wastewater treatment plants. Applying the biorefinery concept is necessary for PPI from an environmental point of view and because of the piles of valuables contained therein in the form of waste. This will provide a renewable source for producing valuables and bio-energy and aid in making the overall process more economical and environmentally sustainable. Therefore, it is compulsory to continue inquiry on different applications of wastes, with proper justification of the environmental and economic factors. This review discusses current trends and challenges in wastewater management and the bio-valorization of paper mills. Lignin has been highlighted as a critical component for generating valuables, and its recovery prospects from solid and liquid PPI waste have been suggested.

Effective extraction of fluoroquinolones from water using facile modified plant fibers

In this study, ecofriendly and economic carboxy-terminated plant fibers (PFs) were used as adsorbents for the effective in-syringe solid phase extraction (IS-SPE) of fluoroquinolone (FQ) residues from water. Based on the thermal esterification and etherification reaction of cellulose hydroxy with citric acid (CA) and sodium chloroacetate in aqueous solutions, carboxy groups grafted onto cotton, cattail, and corncob fibers were fabricated. Compared with carboxy-terminated corncob and cotton, CA-modified cattail with more carboxy groups showed excellent adsorption capacity for FQs. The modified cattail fibers were reproducible and reusable with relative standard deviations of 3.2%–4.2% within 10 cycles of adsorption-desorption. A good extraction efficiency of 71.3%–80.9% was achieved after optimizing the extraction condition. Based on carboxylated cattail, IS-SPE coupled with ultra-performance liquid chromatography with a photodiode array detector was conducted to analyze FQs in environmental water samples. High sensitivity with limit of detections of 0.08–0.25 μg/L and good accuracy with recoveries of 83.8%–111.7% were obtained. Overall, the simple and environment-friendly modified waste PFs have potential applications in the effective extraction and detection of FQs in natural waters.

•

Plant fibers were functionalized by green methods.

•

The bio-adsorbents were applied for the extraction of fluoroquinolones.

•

The higher carboxy content in fibers improved extraction performance.

•

Carboxylated cattail was efficient in the adsorption of fluoroquinolones in environmental waters.

Fabrication of environmentally-friendly composited sponges for efficient removal of fluoroquinolones antibiotics from water

In this study, two environmentally-friendly macroscopically formal (PVF) composited sponges (PL and PLS) functionalized with lignin and lignosulfonate, respectively, were fabricated by a one-step mechanical foaming method. PLS, obtained with the fed mass ratio of 0.3:1 lignosulfonate to PVF in the preparation process, possessed a large specific surface area of approximately 22.396 m²/g, a three-dimensional skeleton structure with a skeletal density of 3.236 g/cm³, and 0.338 mmol/g of acidic oxygen-containing groups. Thus, it showed a high adsorption capacity of 0.16-0.24 mmol/g in removing seven antibiotics, of the popular fluoroquinolones (FQs) family from water. The contributions of hydrogen bonding, electrostatic attraction (EA) and π-π electron donor-acceptor interaction to the adsorption of FQs onto the PL and PLS sponges were analyzed systematically by investigating the pH dependence of the adsorption capacity, and the changes in adsorption of two sub structural analogs of FQs as molecular probes, and by performing theoretical calculations. The EA between the acidic oxygen-containing groups on the sponges and the amino groups of FQs played a dominant role in adsorption in near neutral conditions, leading to a superior adsorption performance for PLS. Overall, the composited sponges have the advantages of simple production, environmental-friendliness, convenient recycle, and low cost, which renders them potentially viable in treating real wastewater containing FQs.

Critical review on adsorptive removal of antibiotics: Present situation, challenges and future perspective

This review gives a proper dedicated understanding of the contamination level, sources, and biological dangers related with different classes of antibiotics in consumable water. The literature on the adsorption of antibiotics is relatively uncommon and developments are still under progression, especially for adsorbents other than activated carbon. Also, adsorption technique has already been applied vastly for water treatment. Notwithstanding significant progressions, designed natural wastewater treatment frameworks are just bearably effective (48-77%) in the expulsion of antibiotics. Hence, the compilation of available literature especially for antibiotic adsorption was much needed. Moreover, the conventional adsorbents have some limitations of their own. In this study, the main focus was laid on unconventional adsorbents such as Biochar, Biopolymers, Carbon Nanotubes, Clays, Metal-Organic Frameworks, Microalgae and some miscellaneous adsorbents. The mechanism of adsorption by the unconventional adsorbents includes electrostatic interactions, π-π bonding, weak Van der Waal forces, H-bonding and surface complexation, which was similar to that of conventional adsorbents and hence these unconventional adsorbents can easily replace the costlier conventional adsorbents with even better adsorption efficiency. This paper also briefly discussed the thermodynamics, adsorption equilibrium; isotherm and kinetics of adsorption. This review paper seizes the critical advances of adsorption phenomenon at various interfaces and lays the foundation for current scenario associated with further progress. Besides, this study would help in understanding the antibiotic adsorption, cost estimation and future goals that will attract the young the researchers of this field.

In situ utilization of biomass pretreatment liquor as a novel flocculant for anion dyes removal: Performance and mechanism

In this work, it was first found biomass pretreatment liquor (PL) produced from rice straw (RS) pretreatment with FeCl₃ and polyethylene glycol 400 co-solvent can be used in situ as a new flocculant to remove anionic dyes from wastewater. The removal performance of nine dyes was investigated using various PL doses at different pH values. The experiment indicated that the PL had different flocculation effects on these dyes (color removal efficiency: 42.58-99.84%). Positive color removal results for the dyes were unachievable with six commercial coagulants. Among the nine dyes treated by PL flocculation, the best removal efficiencies for color, turbidity and suspended matter were obtained for Congo red. In the flocculation process, Fe³⁺ plays a role in charge neutralization, lignin nanoparticles (LNP) relies on hydroxyl groups to react instantaneously with the amino groups on the dye, and are bridged together by π-π interactions to promote the formation of floc clusters until they completely settle. Utilization of PL as a flocculant helps pave the way to simultaneously treat waste biomass, waste treatment liquor and dye wastewater. This research is of great significance for future water environment remediation and material development.

Groundwater antibiotic pollution and its relationship with dissolved organic matter: Identification and environmental implications

The occurrence of veterinary antibiotics and hydro-chemical parameters in eleven natural springs in a livestock production area is evaluated, jointly with the characterization of their DOM fingerprint by Orbitrap HRMS. Tetracycline and sulfonamide antibiotics were ubiquitous in all sites, and they were detected at low ng L^-1 concentrations, except for doxycycline, that was present at μg L^-1 in one location. DOM analysis revealed that most molecular formulas were CHO compounds (49 %-68 %), with a remarkable percentage containing nitrogen and sulphur (16 %-23 % and 11 %-24 %, respectively). Major DOM components were phenolic and highly unsaturated compounds (~90 %), typical for soil-derived organic matter, while approximately 11 % were unsaturated aliphatic, suggesting that springs may be susceptible to anthropogenic contamination sources. Comparing the DOM fingerprint among sites, the spring showing the most different profile was the one with surface water interaction and characterized by having lower CHO and higher CHOS formulas and aliphatic compounds. Correlations between antibiotics and DOM showed that tetracyclines positively correlate with unsaturated oxygen-rich substances, while sulfonamides relate with aliphatic and unsaturated oxygen-poor compounds. This indicates that the fate of different antibiotics will be controlled by the type of DOM present in groundwater.

Selective adsorption of ofloxacin and ciprofloxacin from a binary system using lignin-based adsorbents: Quantitative analysis, adsorption mechanisms, and structure-activity relationship

A series of actinia-shaped lignin-based adsorbents (LNAEs) featuring lignin (LN) as the core and grafted poly(acrylic acid) (PAA) as the tentacle were designed and fabricated. Two fluoroquinolones (FQs) with similar molecular structures, ofloxacin (OFL) and ciprofloxacin (CIP), were used as targets to study the selective adsorption performance of LNAEs associated with the structural effects of the LN-based adsorbents in FQs binary aqueous system. The adsorption of the two FQs by LNAEs complied with the competitive Langmuir isothermal model, and showed selective removal of CIP over OFL due to the additional negative charge-assisted hydrogen bond (CAHB) formed between the carboxyl group of LNAEs and the secondary amino group of CIP, in addition to the effects of electrostatic attraction and normal hydrogen bonds, according to quantitative studies and density functional theory analysis. A binary nonlinear model based on phenomenological theory was applied to study the effects of PAA branched-chain length and distribution on the selective adsorption performance of the LN-based adsorbents. Accordingly, the branched-chain distribution played a more important role and higher distribution density of branched PAA could expose more adsorption sites on LNAEs' surface and improve the adsorptive selectivity. This study offers a well understanding of the structure-activity relationship of the surface grafting-modified adsorbents in binary pollutant systems and fundamental guidance for the exploitation and design of novel and efficient adsorbents.