A novel electrochemically enhanced homogeneous PMS-heterogeneous CoFe2O4 synergistic catalysis for the efficient removal of levofloxacin

Exploration of the mechanism of levofloxacin removal by N-doped-induced interfacial micro-electric field-activated persulfate

The defects formed by N doping always coexist with pyrrole nitrogen (Po) and pyridine nitrogen (Pd), and the synergistic mechanisms of H2O2 production and PMS activation between the different Po: Pd are unknown. This paper synthesized MOF-derived carbon materials with different nitrogen-type ratios as cathode materials in an electro-Fenton system using precursors with different nitrogen-containing functional groups. Several catalysts with different Po: Pd ratios (0:4, 1:3, 2:2, 3:1, 4:0) were prepared, and the best catalyst for LEV degradation was FC-CN (Po: Pd=3:1). X-ray Photoelectron Spectroscopy (XPS) and density-functional theory (DFT) calculations show that the introduction of nitrogen creates an interfacial micro-electric field (IMEF) in the carbon layer and the metal, accelerates the electron transfer from the carbon layer to the Co atoms, and promotes cycling between the Fe3+/Co2+ redox pairs, with the electron transfer reaching a maximum at Po: Pd = 3:1. FC-CN (Po: Pd=3:1) achieved more than 95 % LEV degradation in 90 min at pH = 3-9, with a lower energy consumption of 0.11 kWh m-3 order-1. and the energy consumption of the catalyst for LEV degradation is lower than that of those catalysts reported. In addition, the degradation pathway of LEV was proposed based on UPLC-MS and Fukui function. This study offers some valuable information for the application of MOF derivatives.

Efficiently photocatalysis activation of peroxymonosulfate by bimetallic metal-organic frameworks Mn-MIL-53(Fe) for ibuprofen degradation: Synergistic efficiency, mechanism and degradation pathways

In this study, a UV-driven photocatalytic activation of peroxymonosulfate (PMS) system was constructed using bimetallic metal-organic frameworks to degrade pharmaceuticals and personal care products (PPCPs). Mn-MIL-53(Fe) was successfully synthesised by adjusting the doping ratio of Mn using solvothermal method. The removal of ibuprofen (IBP) by UV/Mn-MIL-53(Fe)/PMS process was as high as 79.7% in 30 min with a Mn doping ratio of 1.0 (molar ratio of Mn to Fe), and the reaction rate constant was 26.9% higher than undoped. Mn-MIL-53(Fe) had been systematically characterized in terms of its physical structure, microscopic morphology, surface functional groups and photoelectric properties. The mechanism investigation revealed that the cycling of Mn and Fe accelerated the rate of electron transfer in the system, which significantly increased the activation efficacy of PMS to generate more hydroxyl and sulfate radicals for IBP degradation. A total of 13 transformation products were detected during the degradation of IBP by the UV/Mn-MIL-53(Fe)/PMS process. Theoretical calculations were used to predict the sites on the IBP molecule that were vulnerable to attack, and four possible degradation pathways were deduced. The excellent stability and efficient catalytic properties of Mn-MIL-53(Fe) provided a promising solution to the problem of water treatment contaminated with PPCPs.

New insight into wastewater treatment by activation of sulfite with humic acid under visible light irradiation

Sulfite (S(IV)), as an alternative to persulfate, has demonstrated its cost-effectiveness and environmentally friendly nature, garnering increasing attention in Advanced Oxidation Processes (AOPs). Dissolved organic matter (DOM) commonly occurred in diverse environments and was often regarded as an interfering factor in sulfite-based AOPs. However, less attention has been paid to the promotion of the activation of sulfite by excited DOM, which could produce various reactive intermediates. The study focused on the activation of sulfite using visible light (VL) - excited humic acid (HA) to efficiently degrade many common organic pollutants, which was better than peroxydisulfate (PDS) and peroxymonosulfate (PMS) systems. Quenching experiments and electron paramagnetic resonance (EPR) analysis revealed that the triplet states of HA (3HA*) activated sulfite through energy transfer, resulting in the production of SO4·-, O2·-, and 1O2. The most significant active species found in the degradation of roxarsone (ROX) was 1O2, which was a non-radical pathway and exhibits high selectivity for pollutant degradation. This non-radical pathway was not commonly observed in traditional sulfite-based AOPs. Additionally, the coexistence of various inorganic anions, such as NO3-, Cl-, SO42-, CO32-, and PO43-, had little effect on the degradation of ROX. Furthermore, DOM from different natural water demonstrated efficient activation of S(IV) under light conditions, opening up new possibilities for applying sulfite-based advanced oxidation to the remediation of organic pollution in diverse sites and water bodies. In summary, this research offered promising insights into the potential application of sulfite-based AOPs, facilitated by photo-excited HA, as a new strategy for efficiently degrading organic pollutants in various environmental settings.

A novel molecularly imprinted electrochemical sensor from poly (3, 4-ethylenedioxythiophene)/chitosan for selective and sensitive detection of levofloxacin

The improper usage of levofloxacin (LEV) endangers both environmental safety and human public health. Therefore, trace analysis and detection of LEV have extraordinary significance. In this paper, a novel molecularly imprinted polymer (MIP) electrochemical sensor was developed for the specific determination of LEV by electrochemical polymerization of o-phenylenediamine (o-PD) using poly(3,4-ethylenedioxythiophene)/chitosan (PEDOT/CS) with a porous structure and rich functional groups as a carrier and LEV as a template molecule. The morphology, structure and properties of the modified materials were analyzed and studied. The result showed that the electron transfer rate and the electroactive strength of the electrode surface are greatly improved by the interconnection of PEDOT and CS. Meanwhile, PEDOT/CS was assembled by imprinting with o-PD through non-covalent bonding, which offered more specific recognition sites and a larger surface area for the detection of LEV and effectively attracted LEV through intermolecular association. Under the optimized conditions, MIP/PEDOT/CS/GCE showed good detection performance for LEV in a wide linear range of 0.0019- 1000 μM, with a limit of detection (LOD, S/N = 3) of 0.4 nM. Furthermore, the sensor has good stability and selectivity, and exhibits excellent capabilities in the microanalysis of various real samples.

Insights into the mechanism of multiple Cu-doped CoFe2O4 nanocatalyst activated peroxymonosulfate for efficient degradation of Rhodamine B

The multiple metal catalyst as a promising nanomaterial has shown excellent activity in the peroxymonosulfate (PMS) activation for pollutant degradation. However, the role of special sites and in-depth understanding of the PMS activation mechanism are not fully studied. In this study, a Cu-doped CoFe2O4 nanocatalyst (0.5CCF) was synthesized by a sol-gel and calcination method, and used for PMS activation to remove Rhodamine B (RhB). The results showed that the Cu doping obviously enhanced the catalytic performance of CoFe2O4, with 99.70% of RhB removed by 0.5CCF while 74.91% in the CoFe2O4 within 15 min. Based on the X-ray photoelectron spectroscopy and electrochemical analysis, this could be ascribed to the more low valence of Co and Fe species generated on the 0.5CCF and faster electron transfers occurred in the 0.5CCF due to the Cu doping. In addition, Cu doping could provide more reaction sites for the 0.5CCF to activate PMS for RhB removal. The metal species and the surface hydroxyl were the reaction sites of PMS activation, and the surface hydroxyl played an important role in surface-bound reactive species generation. During the PMS activation, the Cu not only activated PMS to produce reactive oxygen species (ROS), but also regenerated Co2+ and Fe2+ to accelerate the PMS activation. The non-radical of 1O2 was the main ROS with a 99.35% of contribution rate, and the SO5•- self-reaction was its major source. This study provides a new insight to enhance the PMS activation performance of multiple metal catalysts by Cu doping in wastewater treatment.

Integrating g-C3N4 nanosheets with MOF-derived porous CoFe2O4 to form an S-scheme heterojunction for efficient pollutant degradation via the synergy of photocatalysis and peroxymonosulfate activation

When confronted with wastewater that is characterized by complex composition, stable molecular structure, and high concentration, relying solely on photocatalytic technology proves inadequate in achieving satisfactory degradation results. Therefore, the integration of other highly efficient degradation techniques has emerged as a viable approach to address this challenge. Herein, a novel strategy was employed whereby the exfoliated g-C3N4 nanosheets (CNs) with exceptional photocatalytic performance, were intimately combined with porous rod-shaped cobalt ferrite (CFO) through a co-calcination process to form the composite CFO/CNs, which exhibited remarkable efficacy in the degradation of various organic pollutants through the combination of photocatalysis and Fenton-like process synergistically, exemplified by the representative case of tetracycline hydrochloride (TCH, 200 mL, 50 mg/L). Specifically, under 1 mM of peroxymonosulfate (PMS) and illumination conditions, 50 mg of 1CFO/9CNs achieved a TCH removal ratio of ∼90% after 60 min of treatment. Furthermore, this work comprehensively investigated the influence of various factors, including catalyst and PMS dosages, solution pH, and the presence of anions and humate, on the degradation efficiency of pollutants. Besides, quenching experiments and EPR tests confirmed the establishment of an S-scheme heterojunction between CNs and CFO, which facilitated the effective spatial separation of photoexcited charge carriers and preserved the potent redox potential of photogenerated electrons and holes. This work offers a valuable reference for the integration of photocatalysis with the PMS-based Fenton-like process.

Highly effective degradation of ibuprofen by alkaline metal-doped copper oxides via peroxymonosulfate activation: Mechanisms, degradation pathway and toxicity assessments

Redox ratios of Cu2+/Cu+ and adsorbed oxygen species (Oads) have shown great activity toward radical generation by activating peroxymonosulfate (PMS). Herein, different alkaline metal oxides (CaO, MgO and BaO) and various amounts of CaO are incorporated into CuO, which could tune the main active sites of redox ratios of Cu2+/Cu+ and Oads. The results show that CaO-CuO-5% exhibits the outstanding performance of PMS activation toward ibuprofen (IBF) degradation with excellent kinetics (k = 0.812 min-1). The X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculation show that the CaO-CuO-5% has the higher electron density with superior electron transfer ability and lower PMS adsorption energy. Based on radical scavengers and electron paramagnetic resonance spectrometer (EPR), a nonradical process is proposed to play the dominant role. The degradation pathway and the corresponding toxicity of degraded intermediates with residue PMS after reaction is evaluated by LC-MS/MS and bioassay experiments, indicating the lower antagonistic influence on human hormone receptors after advanced oxidation process. Mitigation of the Cu leaching with cyclic stability can be achieved. This study provides a facile method to optimize high-performance catalysts to activate PMS and offer practical environmental applications in the remediation of emerging contaminants.

One-pot synthesis of bimetallic Fe-Cu metal-organic frameworks composite for the elimination of organic pollutants via peroxymonosulphate activation

A series of bimetallic of FeCu metal-organic frameworks (MOFs) have been synthesised using a solvothermal process by varying the ratio between the two metals. Further, the bimetallic MOF catalysts were characterised by X-ray powder diffraction, scanning electron microscopy, and infrared spectroscopy techniques. Their catalytic properties for activation of peroxymonosulphate (PMS) have been tested by the removal of a model dye, rhodamine B. As a result, NH2-Fe2.4Cu1-MOF demonstrated the highest degradation, the effect of the ratio NH2-Fe2.4Cu1-MOF/PMS has been studied, and the main reactive species have been assessed. The application of these MOFs in powder form is difficult to handle in successive batch or flow systems. Thus, this study assessed the feasibility of growing NH2-Fe2,4Cu1-MOF on polyacrylonitrile (PAN) spheres using the one-pot solvothermal synthesis method. The optimisation of the catalytic activity of the synthesised composite (NH2-Fe2.4Cu1-MOF@PAN) has been evaluated by response surface methodology using a central composite face-centred experimental design matrix and selecting as independent variables: time, PMS concentration, and catalyst dosage. Based on the results, the optimisation of the operational conditions has been validated. At 2.5 mM PMS, 90 min, and 1.19 g·L-1 of catalyst dosage, maximum degradation (80.92%) has been achieved, which doubles the removal values obtained in previous studies with other MOFs. In addition, under these conditions, the catalyst has been proven to maintain its activity and stability for several cycles without activity loss.

Facile synthesis of NaA zeolite supported Co2Fe1 for highly efficient degradation of Acid Orange 7 by activation of peroxymonosulfate

The development of heterogeneous Co-based catalysts with an effective combination mode of Co/Fe and supporter, a facile synthetic method, and a low treatment cost is an important environment challenge for azo dyes degradation by peroxymonosulfate (PMS) activation. In this study, NaA zeolite supported CoxFey with various molar ratio of Fe/Si and Co/Fe was synthesized by a facile hydrothermal process, and used to activate PMS for Acid Orange 7 (AO7) degradation. NaA zeolite supported Co2Fe1 with the Fe/Si molar ratio of 1:10 showed superior catalytic performance compared with other NaA zeolite supported CoxFey. In a system containing 0.6 g/L catalysts, 4 mM PMS, pH 5 and T = 30℃, 95.8% AO7 and 79.1% COD conversion could be achieved at 20 and 60 min, respectively, and the first order kinetic rate constant reached 0.14795 min-1. Moreover, NaA zeolite supported Co2Fe1/PMS system exhibited excellent catalytic effect in a wide pH range of 3-9. Temperature had an obvious effect on AO7 degradation, and the activation energy was 31.36 kJ/mol. HCO3- demonstrated an obvious depression on AO7 degradation, while Cl-, SO42- and H2PO4- had a relatively poor impact. Quenching experiments showed that both sulfate radicals ([Formula: see text]) and hydroxyl radicals (·OH) were generated in the PMS reaction system, and the [Formula: see text] was the dominant active radical. During 3 cycles experiments, an acceptable AO7 conversion ratio (91.8%) within 30 min arrived, suggesting the good stability of NaA zeolite supported Co2Fe1.

Sustainable functionalized smectitic clay-based nano hydrated zirconium oxides for enhanced levofloxacin sorption from aqueous medium

In this study, the functionalized smectitic clay (SC)-based nanoscale hydrated zirconium oxide (ZrO-SC) was successfully synthesized and utilized for the adsorptive removal of levofloxacin (LVN) from an aqueous medium. The synthesized ZrO-SC and its precursors (SC and hydrated zirconium oxide (ZrO(OH)₂)) were extensively characterized using various analytical methods to get insight into their physicochemical properties. The results of stability investigation confirmed that ZrO-SC composite is chemically stable in strongly acidic medium. The surface measurements revealed that ZrO impregnation to SC resulted in an increased surface area (six-fold higher than SC). The maximum sorption capacity of ZrO-SC for LVN was 356.98 and 68.87 mg g^-1 during batch and continuous flow mode studies, respectively. The mechanistic studies of LVN sorption onto ZrO-SC revealed that various sorption mechanisms, such as interlayer complexation, π-π interaction, electrostatic interaction, and surface complexation were involved. The kinetic studies of ZrO-SC in the continuous-flow mode indicated the better applicability of Thomas model. However, the good fitting of Clark model suggested the multi-layer sorption of LVN. The cost estimation of the studied sorbents was also assessed. The obtained results indicate that ZrO-SC is capable of removing LVN and other emergent pollutants from water at a reasonable cost.

Double-Confined Ultrafine Cobalt Clusters for Efficient Peroxide Activation

The construction of highly active catalysts presents great prospects, while it is a challenge for peroxide activation in advanced oxidation processes (AOPs). Herein, we facilely developed ultrafine Co clusters confined in mesoporous silica nanospheres containing N-doped carbon (NC) dots (termed as Co/NC@mSiO₂) via a double-confinement strategy. Compared with the unconfined counterpart, Co/NC@mSiO₂ exhibited unprecedented catalytic activity and durability for removal of various organic pollutants even in extremely acidic and alkaline environments (pH from 2 to 11) with very low Co ion leaching. Experiments and density functional theory (DFT) calculations proved that Co/NC@mSiO₂ possessed strong peroxymonosulphate (PMS) adsorption and charge transfer capability, enabling the efficient O-O bond dissociation of PMS to HO^• and SO₄^•- radicals. The strong interaction between Co clusters and mSiO₂ containing NC dots contributed to excellent pollutant degradation performances by optimizing the electronic structures of Co clusters. This work represents a fundamental breakthrough in the design and understanding of the double-confined catalysts for peroxide activation.

Efficient removal of recalcitrant naphthenic acids with electro-cocatalytic activation of peroxymonosulfate by Fe(III)-nitrilotriacetic acid complex under neutral initial pH condition

This work investigated the activation of peroxymonosulfate by electrochemical (EC) system assisted with Fe(III)-nitrilotriacetic acid (NTA) complex for degradation of persistent naphthenic acids (NAs) under neutral initial pH conditions. As NAs are a complicated mixture, 1-adamantanecarboxylic acid (ACA) was selected as the model NA compound for degradation experiment. The addition of NTA is to chelate with Fe(III), gaining stability under neutral pH condition to facilitate the circulation of Fe(II)/Fe(III) by the electrochemical process to activate PMS. The EC/Fe(III)-NTA/PMS system was explored with applicable pH range of 3-9 and an optimized molar ratio 1: 2 for Fe: NTA. Results of quenching and chemical probe experiment together with results of electron paramagnetic resonance (EPR) analysis revealed the main reactive species of the system, including ^•OH, SO₄^•-, ¹O₂ and possibly Fe(IV). With the addition of NTA, the yields of ^•OH, SO₄^•-, ¹O₂ were enhanced. Results of mass spectrometry analysis and DFT calculations indicated the formation of 9 degradation byproducts of ACA via three primary degradation pathways such as hydroxyl substitution, carbonyl substitution, and decarboxylation. Furthermore, the EC/Fe(III)-NTA/PMS system could achieve excellent removal efficiency of ACA with different anions such as Cl^-, HCO₃^-, NO₃^- and H₂PO₄^- in the background. The practical applicability of the system was also verified with the high removal of commercial NAs mixture standard. Overall results have indicated the EC/Fe(III)-NTA/PMS system could be utilized for efficient reclamation of authentic oil and gas industrial wastewater under natural pH conditions.

Interface engineering-induced perovskite/spinel LaCoO3/Co3O4 heterostructured nanocomposites for efficient peroxymonosulfate activation to degrade levofloxacin

Conventional perovskite oxides (ABO₃) tend to suffer from their inactive surfaces and limited active sites that reduce their catalytic activity and stability, while interface engineering is a facile modulating technique to boost the catalyst's inherent activity by constructing heterogeneous interfaces. In this study, perovskite/spinel LaCoO₃/Co₃O₄ nanocomposites with heterogeneous interfaces were synthesized via sol-gel and in-situ gradient etching methods to activate peroxymonosulfate (PMS) for degrading levofloxacin (LEV). LaCoO₃ on the surface was etched into spinel Co₃O₄, and LaCoO₃/Co₃O₄ nanocomposites with two crystal structures of perovskite and spinel were successfully formed. The surface-modified LaCoO₃/Co₃O₄ exhibited superior catalytic performance with a reaction rate constant more than 2 times that of the original LaCoO₃, as well as excellent pH adaptability (3-11) and reusability (more than 6 recyclings) for LEV degradation. Besides, multiple characterization techniques were carried out to find that LaCoO₃/Co₃O₄ possessed a larger specific surface area and richer oxygen vacancies after surface modification, which provided more active sites and accelerated mass transfer rate. The mechanism of reactive oxygen species involved in the reaction system was proposed that LaCoO₃/Co₃O₄ not only reacted with PMS directly to produce SO₄^•- and ^•OH but also its surface hydroxyl group helped to form the [≡Co(Ⅲ)OOSO₃]⁺ reactive complex with PMS to produce O₂^•- and ¹O₂. In addition, electrochemical experiments demonstrated that the surface electronic structure of LaCoO₃/Co₃O₄ was effectively regulated, exhibiting a faster electron transfer rate and facilitating the redox process. By detecting and identifying degradation intermediates, three degradation pathways for LEV were proposed. Our work provided profound insights into the design of efficient and long-lasting catalysts for advanced oxidation processes.

Insight into electrochemically boosted trace Co(II)-PMS catalytic process: Sustainable Co(IV)/Co(III)/Co(II) cycling and side reaction blocking

A novel homogeneous electrocatalytic system was constructed by current-assisted trace Co(II) activating PMS (ECP) to remove reactive blue 19 (RB19). More than 93 % of RB19 was rapidly removed with only a trace dose, and the PMS was 98.35 % utilized during the reaction. By exploring the active species and analyzing the PMS consumption, it was found that current strongly accelerated the Co(III)/Co(II) redox cycle by providing electrons to Co(III), and inhibited the side reaction thus improving the PMS utilization. Electric energy per order was very low, only 0.26 kWh·m³. Radicals (SO₄^•-) and non-radicals (Co(III), Co(IV) and ¹O₂) participated in ECP system, in which SO₄^•- was dominant. By excluding the other three precursors (PMS, •OH and O₂^•-), the side reaction product SO₅^•- was identified as the source of ¹O₂ in ECP system. Combining chelating agent EDTA and chemical probe PMSO, Co(IV) was considered formed by single and double charge transfer. Five degradation pathways of RB19 were proposed using mass spectrometry and DFT calculation. The ecotoxicity and mutagenicity of RB19 and its transformation products were predicted using software simulation. These studies provided an interesting insights into the synergistic Co(II)-PMS systems and offered a new strategy for electrochemical processes.

The synthesis of single-atom catalysts for heterogeneous catalysis

Heterogeneous catalysis is an important class of reactions in industrial production, especially in green chemical synthesis, and environmental and organic catalysis. Single-atom catalysts (SACs) have emerged as promising candidates for heterogeneous catalysis, due to their outstanding catalytic activity, high selectivity, and maximum atomic utilization efficiency. The high specific surface energy of SACs, however, results in the migration and aggregation of isolated atoms under typical reaction conditions. The controllable preparation of highly efficient and stable SACs has been a serious challenge for applications. Herein, we summarize the recent progress in the precise synthesis of SACs and their different heterogeneous catalyses, especially involving the oxidation and reduction reactions of small organic molecules. At the end of this review, we also introduce the challenges confronted by single-atom materials in heterogeneous catalysis. This review aims to promote the generation of novel high-efficiency SACs by providing an in-depth and comprehensive understanding of the current development in this research field.

Modulating the electron structure of Co-3d in Co3O4-x/WO2.72 for boosting peroxymonosulfate activation and degradation of sulfamerazine: Roles of high-valence W and rich oxygen vacancies

Sulfate radical (SO₄^•-)-based heterogonous advanced oxidation processes (AOPs) show promising potential to degrade emerging contaminants, however, regulating the electron structure of a catalyst to promote its catalytic activity is challenging. Herein, a hybrid that consists of Co₃O_4-x nanocrystals decorated on urchin-like WO_2.72 (Co₃O_4-x/WO_2.72) with high-valence W and rich oxygen vacancies (OVs) used to modulate the electronic structure of Co-3d was prepared. The Co₃O_4-x/WO_2.72 that developed exhibited high catalytic activity, activating peroxymonosulfate (PMS), and degrading sulfamerazine (SMR). With the use of Co₃O_4-x/WO_2.72, 100 % degradation of SMR was achieved within 2 min, at a pH of 7, with the reaction rate constant k₁ = 3.09 min^-1. Both characterizations and density functional theory (DFT) calculations confirmed the formation of OVs and the promotion of catalytic activity. The introduction of WO_2.72 greatly regulated the electronic structure of Co₃O_4-x. Specifically, the introduction of high-valence W enabled the Co-3d band centre to be closer to the Fermi level and enhanced electrons (e^-) transfer ability, while the introduction of OVs-Co in Co₃O_4-x promoted the activity of electrons in the Co-3d orbital and the subsequent catalytic reaction. The reactive oxygen species (ROS) were identified as •OH, SO₄^•-, and singlet oxygen (¹O₂) by quenching experiments and electron spin resonance (EPR) analysis. The DFT calculation using the Fukui index indicated the reactive sites in SMR were available for an electrophilic attack, and three degradation pathways were proposed.

A self-circulating electro-fenton-like process over Fe3O4-CaO2 cathode for highly efficient degradation of levofloxacin

Electro-Fenton reaction was limited by the generation of H₂O₂ and the circulation of Fe(Ⅱ)/Fe(Ⅲ). Herein, an efficient electro-Fenton-like process was constructed based on Fe₃O₄-CaO₂ cathode promoted by peroxymonosulfate (PMS). Levofloxacin (LEV) could be efficiently degraded (92.1%) and mineralized with the TOC removal of 74.5% in this self-circulating process. More importantly, the Fe₃O₄-CaO₂ exhibited good stability in the recycles due that CaO₂ was covered by Fe₃O₄, which inhibited the rapid release of H₂O₂. Mechanism analysis indicated that CaO₂ could not only replace H₂O₂ to accelerate the oxidation of Fe(Ⅱ) to Fe(Ⅲ), but also could form complexes with Fe(Ⅲ) and PMS to transfer electrons from ligands to metals, thereby enhancing the reduction of Fe(Ⅲ) to Fe(Ⅱ). As a result, the electrical consumption was significantly reduced, which was only 5.0% of the Fe₃O₄ in electro-Fenton reaction. Meanwhile, the hydrolyzed product of Ca(OH)₂ reacted with Fe(Ⅲ) in the presence of H₂O₂ and converted into CaO₂. Thus, the self-circulation of CaO₂/Ca(OH)₂ and Fe(Ⅲ)/Fe(Ⅱ) was realized, which accelerated the generation of active species, such as, ·OH, O₂·^- and ¹O₂. This work first proposed a self-circulating electro-Fenton-like system and demonstrated the potential application of Fe₃O₄-CaO₂ in the treatment of wastewater.

Electro-activating of peroxymonosulfate via boron and sulfur co-doped macroporous carbon nanofibers cathode for high-efficient degradation of levofloxacin

To address the difficulty of precisely regulating the two-electron oxygen reduction reaction (2e-ORR) and investigate the synergistic effect of hydrogen peroxide (H₂O₂) and peroxymonosulfate (PMS), a heterogeneous electro-catalyst was synthesized via carbonation of boron (B) and sulfur (S) co-doping electrospun nanofibers containing iron and cobalt (B, S-Fe/Co@C-NCNFs-900), and used to degrade levofloxacin (Levo) in the electro-activating PMS with self-made cathode material (E-cathode-PMS) system. The morphological, structural, and electrochemical characteristics have been investigated. The results showed that B and S co-doping could remarkably enhance electron transfer and manage two-electron oxygen reduction, which was more favorable for H₂O₂ generation. Levo degradation efficiency could reach 99.63% with a reaction rate of 0.3056 min^-1 in 20 min under the appropriate conditions (pH = 4, current = 20 mA, and [PMS] = 8.0 mM). The steady-state concentration of singlet oxygen (¹O₂) was calculated to be 669.17 × 10^-14 M, which was 15.42, 29.74, and 45.00 times respectively than that of HO₂·/O₂·^- (43.40 × 10^-14 M), ·OH (22.25 × 10^-14 M) and SO₄^-·(14.87 × 10^-14 M), signifying that ¹O₂ was the predominant reactive oxygen species (ROS) involved in Levo removal. The high TOC removal (74.19%), low energy consumption (0.14 kWh m^-3 order^-1), few intermediates toxicity, and excellent Levo degradation efficiency for complex wastewater with various anions and matrixes showed the prospective practical applications of the E-cathode-PMS system. Overall, this study provides a useful strategy to regulate and control the 2e-ORR pathway.

Spinel ferrites materials for sulfate radical-based advanced oxidation process: A review

In the past decade, the sulfate radical-based advanced oxidation processes (SR-AOPs) have been increasingly investigated because of their excellent performance and ubiquity in the degradation of emerging contaminants. Generally, sulfate radicals can be generated by activating peroxodisulfate (PDS) or peroxymonosulfate (PMS). To date, spinel ferrites (SF) materials have been greatly favored by researchers in activating PMS/PDS for their capability and unique superiorities. This article reviewed the recent advances in various pure SF, modified SF, and SF composites for PDS/PMS activation. In addition, synthesis methods, mechanisms, and potential applications of SF-based SR-AOPs were also examined and discussed in detail. Finally, we present future research directions and challenges for the application of SF materials in SR-AOPs.

Peroxymonosulfate activation using heterogeneous catalyst Sr2FeO4 coated on SBA-15 for efficient degradation of antibiotic sulfapyridine

It is significant to explore the advanced oxidation process (AOP) for antibiotic degradation. Herein, a peroxymonosulfate (PMS) activator, Sr₂FeO₄/SBA-15 (SFS) heterogeneous catalyst, was synthesized by in situ growth of Sr₂FeO₄ on the surface of SBA-15. In SFS/PMS catalytic system, Sr atom provided electrons to Fe(II) ↔Fe(III) ↔Fe(II) redox cycle through Sr-O-Fe bonds for PMS activation. The SFS catalyst could activate PMS to generate a free radical coexistence system, including sulfate radical (SO₄∙^-) and hydroxyl radicals (∙OH). The catalyst possessed high catalytic activity and high stability. The degradation efficiency of sulfapyridine (SAD) over the SFS/PMS catalytic system could reach 99.0% after 90 min reaction. After the 5th reuse, the degradation efficiency of SAD was still more than 94.0%, and the phase structure of the catalyst did not alter. The low ion leaching concentration would be more conducive to reuse and avoiding secondary pollution, in comparison to homogeneous catalysts. This catalyst can be widely applied to organic wastewater treatment.-->.

The synergistic effect of PMS activation by LaCoO3/g-C3N4 for degradation of tetracycline hydrochloride: performance, mechanism and phytotoxicity evaluation

A LaCoO3/g-C3N4 catalyst with high stability was designed and used for PMS activation to degrade TC.