High-performance TFNC membrane with adsorption assisted for removal of Pb(II) and other contaminants

Facile Prepared MOF-OH-PAN Nanofiber for Separation Co(II) from Waste Batteries

Recovering cobalt from waste batteries is crucial for resource recycling and environmental protection. Here, MOF-OH, a Zr-based MOF, was synthesized and merged into a polyacrylonitrile (PAN) matrix to create MOF-OH-PAN nanofibers (NFs). These NFs showed a high cobalt ion adsorption capacity of 33.1 mg/g, retaining over 90% of the capacity after six cycles. The adsorption mechanism involves Co(II) surface diffusion followed by strong bonding with functional groups. This technology enables efficient cobalt recovery from waste batteries, supporting reuse and reducing resource depletion and environmental pollution. The study provides insights into waste battery resource management, highlighting environmental and economic benefits and contributing to green resource recovery and circular economy initiatives.

Heavy metal sequestration from wastewater by metal-organic frameworks: a state-of-the-art review of recent progress

Metal-organic frameworks (MOFs) have emerged as highly promising adsorbents for removing heavy metals from wastewater due to their tunable structures, high surface areas, and exceptional adsorption capacities. This review meticulously examines and summarizes recent advancements in producing and utilizing MOF-based adsorbents for sequestering heavy metal ions from water. It begins by outlining and contrasting commonly employed methods for synthesizing MOFs, such as solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical. Rather than delving into the specifics of adsorption process parameters, the focus shifts to analyzing the adsorption capabilities and underlying mechanisms against critical metal(loid) ions like chromium, arsenic, lead, cadmium, and mercury under various environmental conditions. Additionally, this article discusses strategies to optimize MOF performance, scale-up production, and address environmental implications. The comprehensive review aims to enhance the understanding of MOF-based adsorption for heavy metal remediation and stimulate further research in this critical field. In brief, this review article presents a comprehensive overview of the contemporary information on MOFs as an effective adsorbent and the challenges being faced by these adsorbents for heavy metal mitigation (including stability, cost, environmental issues, and optimization), targeting to develop a vital reference for future MOF research.

A nanofiber with a p-π conjugated structure designed based on the Jahn-Teller effect for the removal of cupric tartrate from wastewater

Copper organic complexes with strong chemical stability and high solubility in water are difficult to eliminate with traditional adsorbents. In this work, a novel amidoxime nanofiber (AO-Nanofiber) with the p-π conjugated structure was fabricated through homogeneous chemical grafting coupled with electrospinning and applied to capture cupric tartrate (Cu-TA) from aqueous solutions. The adsorption capacity of Cu-TA by AO-Nanofiber was 198.4 mg/g at an equilibrium time of 40 min, and the adsorption performance remains basically unchanged after 10 times adsorption-desorption cycles. The capture mechanism of Cu-TA by AO-Nanofiber was jointly validated by experiments and characterization such as Fourier Transform Infrared Spectrometer (FT-IR), X-ray Photoelectron Spectroscopy (XPS), and Density functional theory (DFT) calculations. These results demonstrated that the lone pair of electrons of the N atom from the amino groups and the O atom from hydroxyl groups in the AO-Nanofiber is partially transferred to the 3d orbital of the Cu(II) ions in Cu-TA, leading to the Jahn-Teller distortion of the Cu-TA and the more stable structure of AO-Nanofiber@Cu-TA was generated.

Fabricated magnetic adsorption - Forward osmosis membrane hybrid system for hydroponic irrigation from rich arsenic-containing heavy metal water stream

Solidification of soluble arsenic from extremely acidic water and direct use of recovery water have been the major challenges in global water management, with the urgent need for new treatment system development. Thus, magnetic adsorption - fertilizer drawn forward osmosis (FDFO) hybrid system with a novel adsorbent and fertilizer mixture to solve the drawbacks of each process was developed with the ultimate goals of metal removal and direct reuse for hydroponic irrigation. Magnetic metal-organic framework-based adsorbent (CMM) was synthesized with various promising capabilities, i.e., wide pH range efficiency, strong pH adjustment, good stability, fast adsorption (1 h), and oxidation (40 min), high capacity (175 and 126 mg/g for As(III), As(V)), strong magnetization (75 emu/g), complete separation by a magnet, excellent interference-tolerance and reusability. In the FDFO system, a massive water volume (50 times higher than the initial draw solution with suitable nutrients for hydroponics irrigation with acceptable NaCl levels was obtained for the first time up to now. However, low As(III) rejection (50%) required the FDFO process to improve more. After integrating with magnetic adsorption, nearly 100% of As was removed. The pH of feed solutions adjusted from extremely acidic to close to neutral conditions further solidified metal by precipitation and membrane separation processes, leading to almost no detection of metals in the final draw solution. Also, favorable nutrients and excellent reusability were obtained. This hybrid process would generally offer an environmentally sustainable and high efficiency for decontaminating As-containing heavy metal water for hydroponic irrigation.

Comparative study for removal of cationic and anionic dyes using alginate-based hydrogels filled with citric acid-sawdust/UiO-66-NH2 hybrid

Nowadays, a big challenge is developing a sustainable and effective method for removing contaminants like dyes from aqueous solutions. In this regard, Zr-based metal-organic framework (UiO-66-NH₂) and sawdust as the ideal adsorbents were used. Due to their low separation in adsorption processes, embedding into alginate and obtaining composite beads are suggested as a suitable strategy. The achieved Ca-alginate/citric acid (CA)-sawdust/UiO-66-NH₂ hydrogel beads were used to compare cationic and anionic dyes removal. This sorbent indicated an excellent selectivity for removing methylene blue versus methyl orange in a binary system. pH = 6, adsorbent amount = 80 mg, methylene blue concentration = 10 mg/L, and contact time = 420 min were achieved as optimal parameters on methylene blue adsorption with an adsorption capacity of about 26 mg/g. The removal process of methylene blue followed linear Freundlich isotherm and nonlinear pseudo-2nd-order kinetic models. The regeneration test demonstrated methylene blue removal efficiency higher than about 89 % after 9 cycles. According to the outcomes, methylene blue could be attached to the adsorbent surface through the electrostatic, hydrogen bonding, and π-π interactions of the aromatic rings. These results confirm the potential of Ca-alginate/CA-sawdust/UiO-66-NH₂ hydrogel beads as a selective bio-sorbent for cationic dye removal.

Preparation of the Carbonized Zif−8@PAN Nanofiber Membrane for Cadmium Ion Adsorption

The zeolitic imidazolate framework (ZIF−8)@polyacrylonitrile (PAN) nanofiber membrane was prepared and carbonized for heavy metal cadmium ion (Cd²⁺) adsorption in aqueous medium. Zinc oxide (ZnO) was first sputtered onto the surface of the PAN electrospun nanofiber membrane to provide a metal ion source. Then, the ZIF−8@PAN nanofiber membrane was prepared via in situ solvothermal reaction and carbonized in a tube furnace at 900 °C under a N₂ atmosphere to enhance adsorption performance. The synthesized ZIF−8 particles with polyhedral structure were uniformly immobilized on the surface of the PAN electrospun nanofiber membrane. After being heated at 900 °C, the polygonal ZIF−8 shrank, and the carbonized ZIF−8@PAN nanofiber membrane was obtained. Compared with the nanofiber membrane without being carbonized, the adsorption capacity of the carbonized ZIF−8@PAN nanofiber membrane reached 102 mg L⁻¹, and its Cd²⁺ adsorption efficiency could be more than 90% under the adsorption temperature of 35 °C and solution of pH = 7.5 conditions. According to the adsorption thermodynamics analysis, the Cd²⁺ adsorption process of the carbonized ZIF−8@PAN nanofiber membrane was spontaneous. The whole Cd²⁺ adsorption process was more suitably described by the pseudo second-order adsorption kinetics model, indicating that there exists a chemical adsorption mechanism besides physical adsorption.

A post-functional Ti-based MOFs composite for selective removal of Pb (II) from water

Lead ions in water have notorious effects on humans and environment. It is important to design an adsorbent with high adsorption capacity and reproducibility for efficiently removing Pb (II)ions from polluted water. Here, a novel Ti-based MOFs material (BDB-MIL-125(Ti)@Fe₃O₄) was prepared by modifying NH₂-MIL-125(Ti) with sulfhydryl and amino groups. Due to the large number of active sites, the maximum Pb (II) adsorption capacity of BDB-MIL-125(Ti)@Fe₃O₄ was 710.79 mg/g at 25 °C and pH = 6 within 120 min corresponding to a maximum removal rate of 95.68%. The adsorbent also has extremely high selectivity and good cycling adsorption performance. The adsorption isotherms and kinetics agree with the Langmuir and the pseudo-second-order models, indicating that the process was chemisorption. Thermodynamic studies prove that spontaneous processes enhance Pb (II) adsorption at higher temperatures. DFT and FMOs calculations were used to discuss the adsorption mechanism. The sulfhydryl groups on the surface of organic ligands have a stronger affinity for Pb (II).