Ionic liquids as potentially hazardous pollutants: Evidences of their presence in the environment and recent analytical developments

An innovative mixture sampling strategy with uniform design: Application to global sensitivity analysis of mixture toxicity

Global sensitivity analysis combined with quantitative high-throughput screening (GSA-qHTS) uses random starting points of the trajectories in mixture design, which may lead to potential contingency and a lack of representativeness. Moreover, a scenario in which all factor levels were at stimulatory effects was not considered, thereby hindering a comprehensive understanding of GSA-qHTS. Accordingly, this study innovatively introduced an optimised experimental design, uniform design (UD), to generate non-random and representative sample points with smaller uniformity deviation as starting points of multiple trajectories. By combining UD with the previously optimised one-factor-at-a-time (OAT) method, a novel mixture design method was developed (UD-OAT). The single toxicity tests showed that three pyridinium and five imidazolium ionic liquids (ILs) exerted stimulatory effects on Vibrio qinghaiensis sp.-Q67; thus, four stimulatory effective concentrations of each IL were selected as factor levels. The UD-OAT generated 108 mixture samples with equal frequency and without repetition. High-throughput microplate toxicity analysis revealed that all 108 mixtures exhibited inhibitory effects. Among these, type B mixtures exhibited increasing toxicities that subsequently decreased, unlike type C mixtures, which consistently increased over time. GSA successfully identified three of the eight ILs as important factors influencing the toxicities of the mixtures. When individual ILs produced stimulatory effects, mixtures containing two to three ILs exhibited either stimulatory effects or none. In contrast, mixtures containing five to eight ILs exhibited inhibitory effects, while those containing four ILs showed a transition from stimulatory to inhibitory effects. This study provides a novel mixture design method for studying mixture toxicity and fills the application gap of GSA-qHTS. The phenomenon of individuals being beneficial while mixtures can be harmful challenges traditional mixture risk assessments.

Synergistic Applications of Graphene-Based Materials and Deep Eutectic Solvents in Sustainable Sensing: A Comprehensive Review

The recently explored synergistic combination of graphene-based materials and deep eutectic solvents (DESs) is opening novel and effective avenues for developing sensing devices with optimized features. In more detail, remarkable potential in terms of simplicity, sustainability, and cost-effectiveness of this combination have been demonstrated for sensors, resulting in the creation of hybrid devices with enhanced signal-to-noise ratios, linearities, and selectivity. Therefore, this review aims to provide a comprehensive overview of the currently available scientific literature discussing investigations and applications of sensors that integrate graphene-based materials and deep eutectic solvents, with an outlook for the most promising developments of this approach.

The Imidazolium Ionic Liquids Toxicity is Due to Their Effect on the Plasma Membrane

Ionic liquids (ILs) are organic salts with a low melting point. This is due to the fact that their alkyl side chains, which are covalently connected to the ion, hinder the crystallization of ILs. The low melting point of ILs has led to their widespread use as relatively harmless solvents. However, ILs do have toxic properties, the mechanism of which is largely unknown, so identifying the cellular targets of ILs is of practical importance. In our work, we showed that imidazolium ILs are not able to penetrate model membranes without damaging them. We also found that inactivation of multidrug resistance (MDR) pumps in yeast cells does not increase their sensitivity to imidazolium ILs. The latter indicates that the target of toxicity of imidazolium ILs is not in the cytoplasm. Thus, it can be assumed that the disruption of the barrier properties of the plasma membrane is the main reason for the toxicity of low concentrations of imidazolium ILs. We also showed that supplementation with imidazolium ILs restores the growth of cells with kinetically blocked glycolysis. Apparently, a slight disruption of the plasma membrane caused by ILs can, in some cases, be beneficial for the cell.

Potential of ionic liquids as emerging green solvent for the pretreatment of lignocellulosic biomass

Lignocellulosic biomass is available in abundance as a renewable resource, but the major portion of it is often discarded as waste without utilizing its immense potential as an alternative renewable energy resource. To overcome recalcitrance of lignocellulosic biomass, various pretreatment methods are applied to it, so that the complex and rigid polymeric structure can be broken down into fractions susceptible for enzymatic hydrolysis. Effective and efficient biomass processing is the goal of pretreatment methods, but none of the explored pretreatment methods are versatile enough to fulfil the requirement of biomass processing with greater flexibility in terms of operational cost and desired output efficiency. Deployment of green solvents such as ionic liquids for the pretreatment of lignocellulosic biomass has been a topic of discussion amongst the scientific community in recent times. The presented work provides a detailed overview on the deployment of ionic liquid for the pretreatment of lignocellulosic biomass coupled with a brief discussion on other pretreatments methods. The recyclability and reusability along with other unique properties makes an ionic liquid pretreatment different from the other traditional pretreatment methods. Also, this study explores diverse critical parameters that governs the dissolution process of biomass. Hazardous properties of ionic liquids have also been explored. Future perspective and recommendations have been given for an efficient, effective, and eco-friendly deployment of ionic liquid in biomass pretreatment process.

Electrocatalytic CO2 Reduction to Ethylene: From Advanced Catalyst Design to Industrial Applications

The value-added chemicals, monoxide, methane, ethylene, ethanol, ethane, and so on, can be efficiently generated through the electrochemical CO2 reduction reaction (eCO2 RR) when equipped with suitable catalysts. Among them, ethylene is particularly important as a chemical feedstock for petrochemical manufacture. However, despite its high Faradaic efficiency achievable at relatively low current densities, the substantial enhancement of ethylene selectivity and stability at industrial current densities poses a formidable challenge. To facilitate the industrial implementation of eCO2 RR for ethylene production, it is imperative to identify key strategies and potential solutions through comprehending the recent advancements, remaining challenges, and future directions. Herein, the latest and innovative catalyst design strategies of eCO2 RR to ethylene are summarized and discussed, starting with the properties of catalysts such as morphology, crystalline, oxidation state, defect, composition, and surface engineering. The review subsequently outlines the related important state-of-the-art technologies that are essential in driving forward eCO2 RR to ethylene into practical applications, such as CO2 capture, product separation, and downstream reactions. Finally, a greenhouse model that integrates CO2 capture, conversion, storage, and utilization is proposed to present an ideal perspective direction of eCO2 RR to ethylene.

Deep eutectic solvents combined with beta-cyclodextrin derivatives for chiral separation of typical adrenergic receptor agonists by capillary electrophoresis with amperometric detection

Enantioseparation has always been one of the research hotspots and difficulties in the field of modern separation science. In this work, a binary chiral electrophoretic separation system was constructed using deep eutectic solvents (DESs) coupled with beta-cyclodextrin derivatives based on capillary electrophoresis with amperometric detection system, and five groups of typical adrenergic receptor agonists (adrenaline, salbutamol, isoproterenol, norepinephrine and terbutaline) were selected as the model enantiomers. The effects of additive types and contents of DESs and cyclodextrins, and the pH value and concentration of the running buffer on the resolution of the selected chiral compounds were investigated in detail. The mechanism of DESs improving separation was explored preliminarily by means of UV spectrophotometry, which was further verified based on the comparison of single and mixed components of choline chlorine-urea DES. Under the optimum conditions, the relative standard deviations for inter-day and intra-day repeatability of the migration time, peak area and resolution for adrenaline and salbutamol were within 8.7%, and the limits of detection reached 0.030 μg mL-1 (S/N = 3). The recovery data were in the range of 96.3-118.7%. The developed methods have been applied for the analyses of (+)-adrenaline hydrochloride injection and (±)-salbutamol aerosol. This binary chiral electrophoretic separation system by CE-AD has high detection sensitivity and low analytical cost, providing an alternative for the separation and analysis of chiral drugs.

Sorption of ionic liquids in soil enriched with polystyrene microplastic reveals independent behavior of cations and anions

Recently, much attention has been focused on the application of the Ionic Liquids (ILs) with herbicidal activity in agriculture. It has been suggested that through the appropriate selection of cations and anions, one can adjust the properties of ILs, particularly the hydrophobicity, solubility, bioavailability, toxicity. In practical agricultural conditions, it will be beneficial to reduce the mobility of herbicidal anions, such as the commonly applied 2,4-dichlorophenoxyacetic acid [2,4-D] in the soil. Furthermore, microplastics are becoming increasingly prevalent in the soil, potentially stimulating herbicidal sorption. Therefore, we investigated whether cations in ILs influence the mobility of anions in OECD soil supplemented with polystyrene microplastic (PS). For this purpose, we used the 2,4-D based ILs consisting of: a hydrophilic choline cation [Chol][2,4-D] and a hydrophobic choline cation with a C12chain [C12Chol][2,4-D]. Characterization of selected micropolystyrene was carried out using the BET sorption-desorption isotherm, particle size distribution and changes in soil sorption parameters such as soil sorption capacity and cation exchange capacity. Based on the batch sorption experiment, the effect of microplastic on the sorption of individual cations and anions in soil contaminated with micropolystyrene was evaluated. The results obtained indicate that the introduction of a 1-10% (w/w) PS resulted in an 18-23% increase of the soil sorption capacity. However, the sorption of both ILs' cations increased only by 3-5%. No sorption of the [2,4-D] anion was noted. This suggests that cations and anions forming ILs, behave independently of each other in the environment. The results indicate the fact that ILs upon introduction into the environment are not a new type of emerging contaminant, but rather a typical mixture of ions. It is worth noting that when analyzing the behavior of ILs in the environment, it is necessary to follow the fate of both cations and anions.

Expeditious Discovery of Small-Molecule Thermoresponsive Ionic Liquid Materials: A Review

Ionic liquids (ILs) are a class of low-melting molten salts (<100 °C) constituted entirely of ions, and their research has gained tremendous attention in line with their remarkably growing applications (>124,000 publications dated 30 August 2023 from the Web of ScienceTM). In this review, we first briefly discussed the recent developments and unique characteristics of ILs and zwitterionic liquids (ZILs). Compared to molecular solvents and other conventional organic compounds, (zwitter) ionic liquids carry negligible volatility and are potentially recyclable and reusable. For structures, both ILs and ZILs can be systematically tailor-designed and engineered and are synthetically fine-tunable. As such, ionic liquids, including chiral, supported, task-specific ILs, have been widely used as powerful ionic solvents as well as valuable additives and catalysts for many chemical reactions. Moreover, ILs have demonstrated their value for use as polymerase chain reaction (PCR) enhancers for DNA amplification, chemoselective artificial olfaction for targeted VOC analysis, and recognition-based affinity extraction. As the major focus of this review, we extensively discussed that small-molecule thermoresponsive ILs (TILs) and ZILs (zwitterionic TILs) are new types of smart materials and can be expeditiously discovered through the structure and phase separation (SPS) relationship study by the combinatorial approach. Using this SPS platform developed in our laboratory, we first depicted the rapid discovery of N,N-dialkylcycloammonium and 1,3,4-trialkyl-1,2,3-triazolium TILs that concomitantly exhibited LCST (lower critical solution temperature) phase transition in water and displayed biochemically attractive Tc values. Both smart IL materials were suited for applications to proteins and other biomolecules. Zwitterionic TILs are ZILs whose cations and anions are tethered together covalently and are thermoresponsive to temperature changes. These zwitterionic TIL materials can serve as excellent extraction solvents, through temperature change, for biomolecules such as proteins since they differ from the common TIL problems often associated with unwanted ion exchanges during extractions. These unique structural characteristics of zwitterionic TIL materials greatly reduce and may avoid the denaturation of proteins under physiological conditions. Lastly, we argued that both rational structural design and combinatorial library synthesis of small-molecule TIL materials should take into consideration the important issues of their cytotoxicity and biosafety to the ecosystem, potentially causing harm to the environment and directly endangering human health. Finally, we would concur that before precise prediction and quantitative simulation of TIL structures can be realized, combinatorial chemistry may be the most convenient and effective technology platform to discover TIL expeditiously. Through our rational TIL design and combinatorial library synthesis and screening, we have demonstrated its power to discover novel chemical structures of both TILs and zwitterionic TILs. Undoubtedly, we will continue developing new small-molecule TIL structures and studying their applications related to other thermoresponsive materials.

Cholinium-Based Ionic Liquids as Promising Antimicrobial Agents in Pharmaceutical Applications: Surface Activity, Antibacterial Activity and Ecotoxicological Profile

Cholinium-based ionic liquids are compounds increasingly studied in pharmaceutics and biomedicine to enhance bioavailability in drug delivery systems and as bioactive ingredients in pharmaceutical formulations. However, their potential as antimicrobial agents has scarcely been investigated. Herein, we explored the antimicrobial activity of a series of surface-active cholinium-based ionic liquids (Chol-ILs). For this purpose, Chol-ILs with alkyl chains of 10-16 carbon atoms were synthesized and their self-assembly in aqueous medium was investigated. Subsequently, their antimicrobial activity against a panel of clinically relevant bacteria and their ability to eradicate MRSA and P. aeruginosa PAO1 biofilms was evaluated. Finally, we analyzed the ecotoxicological profile of Chol-ILs in terms of susceptibility to aerobic biodegradation and acute aquatic toxicity against D. magna and V. fisheri. Our results reveal that cholinium-based ILs with alkyl chain lengths ≥12 C show a broad spectrum of antibacterial activity. Their antimicrobial efficacy depends on their hydrophobicity, with the C₁₄-C₁₆ homologs being the most effective compounds. These ILs exhibit antimicrobial activity similar to that of imidazolium ILs and quaternary ammonium antiseptics. Moreover, the longer alkyl chain Chol-ILs are able to eradicate established biofilms at concentrations as low as 16-32 µg/mL. The biodegradation rate of cholinium-based ILs decreases with alkyl chain elongation. Our results reinforce the suitability of Chol-ILs as promising multifunctional compounds for application in pharmaceutical and biomedical formulation.

1-Butyl-3-methylimidazolium Chloride Affects Anaerobic Digestion through Altering Organics Transformation, Cell Viability, and Microbial Community

1-Butyl-3-methylimidazolium chloride (BmimCl), an imidazolium-based ionic liquid, is considered the representative emerging persistent aquatic pollutant, and its environmental toxicity has attracted a growing concern. However, most of the investigations focused on monocultures or a single organism, with little information available on the complex syntrophic consortium that dominates the complex and successional biochemical processes, such as anaerobic digestion. In this study, the effect of BmimCl at environmentally relevant levels on glucose anaerobic digestion was therefore investigated in several laboratory-scale mesophilic anaerobic digesters to provide such support. Experimental results showed that BmimCl at 1-20 mg/L inhibited the methane production rate by 3.50-31.03%, and 20 mg/L BmimCl inhibited butyrate, hydrogen, and acetate biotransformation by 14.29%, 36.36%, and 11.57%, respectively. Toxicological mechanism studies revealed that extracellular polymeric substances (EPSs) adsorbed and accumulated BmimCl through carboxyl, amino, and hydroxyl groups, which destroyed the EPSs' conformational structure, thereby leading to the inactivation of microbial cells. MiSeq sequencing data indicated that the abundance of Clostridium_sensu_stricto_1, Bacteroides, and Methanothrix decreased by 6.01%, 7.02%, and 18.45%, respectively, in response to 20 mg/L BmimCl. Molecular ecological network analysis showed that compared with the control, the lower network complexity, fewer keystone taxa, and fewer associations among microbial taxa were found in the BmimCl-present digester, indicating the reduced stability of the microbial community.

The Nanostructure of Alkyl-Sulfonate Ionic Liquids: Two 1-Alkyl-3-methylimidazolium Alkyl-Sulfonate Homologous Series

The functionalization of polymers with sulfonate groups has many important uses, ranging from biomedical applications to detergency properties used in oil-recovery processes. In this work, several ionic liquids (ILs) combining 1-alkyl-3-methylimidazolium cations [C_nC₁im]⁺ (4 ≤ n ≤ 8) with alkyl-sulfonate anions [C_mSO₃]^- (4 ≤ m ≤ 8) have been studied using molecular dynamics simulations, totalizing nine ionic liquids belonging to two homologous series. The radial distribution functions, structure factors, aggregation analyses, and spatial distribution functions reveal that the increase in aliphatic chain length induces no significant change in the structure of the polar network of the ILs. However, for imidazolium cations and sulfonate anions with shorter alkyl chains, the nonpolar organization is conditioned by the forces acting on the polar domains, namely, electrostatic interactions and hydrogen bonding.

Covalent Organic Frameworks-Based Electrochemical Sensors for Food Safety Analysis

Food safety is a key issue in promoting human health and sustaining life. Food analysis is essential to prevent food components or contaminants causing foodborne-related illnesses to consumers. Electrochemical sensors have become a desirable method for food safety analysis due to their simple, accurate and rapid response. The low sensitivity and poor selectivity of electrochemical sensors working in complex food sample matrices can be overcome by coupling them with covalent organic frameworks (COFs). COFs are a kind of novel porous organic polymer formed by light elements, such as C, H, N and B, via covalent bonds. This review focuses on the recent progress in COF-based electrochemical sensors for food safety analysis. Firstly, the synthesis methods of COFs are summarized. Then, a discussion of the strategies is given to improve the electrochemistry performance of COFs. There follows a summary of the recently developed COF-based electrochemical sensors for the determination of food contaminants, including bisphenols, antibiotics, pesticides, heavy metal ions, fungal toxin and bacterium. Finally, the challenges and the future directions in this field are discussed.

Macrocyclic Ionic Liquids with Amino Acid Residues: Synthesis and Influence of Thiacalix[4]arene Conformation on Thermal Stability

Novel thiacalix[4]arene based ammonium ionic liquids (ILs) containing amino acid residues (glycine and L-phenylalanine) in cone, partial cone, and 1,3-alternate conformations were synthesized by alkylation of macrocyclic tertiary amines with N-bromoacetyl-amino acids ethyl ester followed by replacing bromide anions with bis(trifluoromethylsulfonyl)imide ions. The melting temperature of the obtained ILs was found in the range of 50−75 °C. The effect of macrocyclic core conformation on the synthesized ILs’ melting points was shown, i.e., the ILs in partial cone conformation have the lowest melting points. Thermal stability of the obtained macrocyclic ILs was determined via thermogravimetry and differential scanning calorimetry. The onset of decomposition of the synthesized compounds was established at 305−327 °C. The compounds with L-phenylalanine residues are less thermally stable by 3−19 °C than the same glycine-containing derivatives.