Tailoring abundant active-oxygen sites of Prussian blue analogues-derived adsorbents for highly efficient Yb(III) capture

Ligand-selective turn-off sensing, harvesting and post-adsorptive use of Dy(III) and Yb(III) by intrinsically fluorescent flower-shaped Gum Acacia-grafted hydrogels

Rare earth metals (REMs), such as Dysprosium (Dy) and Ytterbium (Yb), have experienced unprecedented demand in recent times due to their applications in high-end technologies. REMs are found only in select geographic locations placing tremendous economic constraints on their use. In this work, we have developed Gum Acacia-grafted hydrogels (GmAc-FluoroTerPs) that are capable of selective detection and capture of Dy and Yb. The intrinsically blue fluorescent polymer hydrogel GmAc-FluoroTerP has been optimized for Dy(III) and Yb(III) specific quenching, enabling limit of detection of the REMs at 0.13 nM and 60.8 pM, respectively. A comprehensive structural characterization of the fluorescent hydrogel has been performed via NMR, FTIR, XPS, EPR, TGA, XRD, TEM, SEM, EDX, TCSPC, and DLS. In addition to an in situ generated fluorophore, GmAc-FluoroTerP displays a distinctive aggregation induced emission enhancement in mixed solvents. The complexation of Dy(III)/Yb(III) with GmAc-FluoroTerP hydrogel has been characterized by XPS, TCSPC, and logic gate analyses, and the adsorptive capacity for Dy(III) and Yb(III) are found to be best reported till date as 125.57 mg g-1 and 102.27 mg g-1, respectively. Desorption at acidic pH allows recovery of the REMs. We also report semiconducting behaviour of the native fluorescent hydrogel, that is enhanced upon adsorptive capture of Dy(III) and Yb(III), with calculated band gaps at 1.37, 0.77, and 0.49 eV, respectively. The convergent sensing, capture, and reuse of Dy(III) and Yb(III) presented in this work promises a hitherto unreported template for application on other REMs.

Enhanced effect and mechanism of nano Fe-Ca bimetallic oxide modified substrate on Cu(II) and Ni(II) removal in constructed wetland

In this study, Fe₂O₃ nanoparticles (Fe₂O₃ NPs) and CaO NPs were loaded on the zeolite sphere carrier to create nano Fe-Ca bimetallic oxide (Fe-Ca-NBMO) modified substrate, which was introduced into constructed wetland (CW) to remove Cu(II) and Ni(II) via constructing "substrate-microorganism" system. Adsorption experiments showed that the equilibrium adsorption capacities of Fe-Ca-NBMO modified substrate for Cu(II) and Ni(II) were respectively 706.48 and 410.59 mg/kg at an initial concentration of 20 mg/L, 2.45 and 2.39 times of gravel. The Cu(II) and Ni(II) removal efficiencies in CW with Fe-Ca-NBMO modified substrate respectively reached 99.7% and 99.9% at an influent concentration of 100 mg/L, significantly higher than those in gravel-based CW (47.0% and 34.3%). Fe-Ca-NBMO modified substrate could promote Cu(II) and Ni(II) removal by increasing electrostatic adsorption, chemical precipitation, as well as the abundances of resistant microorganisms (Geobacter, Desulfuromonas, Zoogloea, Dechloromonas, and Desulfobacter) and functional genes (copA, cusABC, ABC.CD.P, gshB, and exbB). This study provided an effective method to enhance Cu(II) and Ni(II) removal of electroplating wastewater by CW with Fe-Ca-NBMO modified substrate.

Preparation of paramagnetic ferroferric oxide-calcined layered double hydroxide core-shell adsorbent for selective removal of anionic pollutants

Adsorption is one of the most common methods of pollution treatment. The selectivity for pollutants and recyclability of adsorbents are crucial to reduce the treatment cost. Layered double hydroxide (LDH) materials are one type of adsorbent with poor recyclability. Prussian blue (PB) is a sturdy and inexpensive metal-organic framework material that can be used as the precursor for synthesizing paramagnetic ferroferric oxide (Fe₃O₄). It is intriguing to build some reusable adsorbents with magnetic separation by integrating LDH and PB. In this work, paramagnetic Fe₃O₄-calcined LDH (Fe₃O₄@cLDH) core-shell adsorbent was designed and prepared by the calcination of PB-ZnAl layered double hydroxide (PB@LDH) core-shell precursor, which exhibits high anionic dyes selectivity in wastewater solutions. The paramagnetism and adsorption capability of Fe₃O₄@cLDH come from the Fe₃O₄ core and calcined ZnAl-LDH shell, respectively. Fe₃O₄@cLDH shows an adsorption capacity of 230 mg g^-1 for acid orange and a high selectivity for anionic dyes in cation-anion mixed dye solutions. The regeneration process indicates that the high selectivity for anions is related to the specific hydration recovery process of ZnAl-LDH. The synergistic effect of the paramagnetic Fe₃O₄ core and calcined ZnAl-LDH shell makes Fe₃O₄@cLDH an excellent magnetic separation adsorbent with high selectivity to anions.

Tuning the Dual Active Sites of Functionalized UiO-66 for Selective Adsorption of Yb(III)

The recovery of rare earth elements (REEs) from discharged electronic devices or mineral waste water is highly essential but still facing challenges. In this work, two amino-functionalized carboxyl-UiO-66 (UiO-66-COOH-TETA and UiO-66-(COOH)₂-ED) prepared via the postmodification method were employed as the adsorbents for Yb(III) capture. The experimental results revealed their superior adsorption capacities of 161.5 and 202.6 mg/g, respectively. Meanwhile, their adsorption processes can be described by the pseudo-second-order kinetic model and Langmuir model. Effects of initial pH and temperature on adsorptions were systematically evaluated, affording an optimal operating condition (i.e., pH of 5.5-6, T of 65 °C, t of 10 h). Moreover, the fabricated materials exhibited great reusability after five adsorption-regeneration cycles. UiO-66-COOH-TETA demonstrated good separation selectivity for Yb(III) over light REEs (i.e., 3.98 of Yb/Ce, 3.51 of Yb/Nd). Based on the density functional theory calculations and characterization analysis (XPS, Zeta, mapping, and IR), the adsorption mechanisms were mainly attributed to significant electrostatic attraction and strong surface complexation between N and O sites and Yb(III).