Development of novel simultaneous single step and multistep cloud point extraction method for silver, cadmium and nickel in water samples

Synthesis of a magnetic SBA-15-NH2@Dual-Template Imprinted Polymer for solid phase extraction and determination of Pb and Cd in vegetables; Box Behnken design

In this study, a simple one-step method was applied for extraction and determination of lead and cadmium. The significant variables in extraction and pre-concentration were identified using analysis of variance and their behavior was modeled. Dual-template imprinted polymer was synthesized on modified Mesoporous silica structures coated with Fe₃O₄ magnetic nanoparticles. The optimum condition was 6.12 for pH, 40.62 mg for the polymer amount and 17.38 for the ultrasonic time. Concentration range, correlation coefficient, limit of detection and relative standard deviation for lead were reported to be 0.5-950, 0.9988, 0.35 μg L^-1 and 3.5%, respectively. For cadmium the above mentioned figure of merits were 0.3-980, 0.9969, 0.15 μg L^-1 and 2.4%, respectively. The adsorption capacities for lead and cadmium were reported to be 10.28 and 10.38, while their imprinting factors were 5.89 and 6.36, respectively.

Health risk assessment induced by trace toxic metals in tap drinking water: Condorcet principle development

Acute exposure to trace metals (TMs) in water is hazardous to human health. The average concentrations (C_avg.) and carcinogenic (CAR) and non-carcinogenic (non-CAR) risks of eight TMs to World Health Organization's (WHO) guidelines and national standard limits (NSLs)were determined. The C_avg. and (the range) of As, Hg, Cd, Pb, Co, Cr, Ni, and Zn were measured as 4.29 ± 0.57 μg L^-1 (1.12-10.27 μg L^-1), 0.22 ± 0.10 μg L^-1 (ND-1.05 μg L^-1), 0.31 ± 0.18 μg L^-1 (ND-1.80 μg L^-1), 4.66 ± 0.32 μg L^-1 (0.10-14.22 μg L^-1), 24.61 ± 4.65 μg L^-1 (3.11-67.25 μg L^-1), 16.86 ± 5.54 μg L^-1 (5.12-34.61 μg L^-1), 14.07 ± 4.37 μg L^-1 (3.79-31.39 μg L^-1), and 268.42 ± 75.82 (87.29-561.22 μg L^-1), respectively. The C_avg. of Co and Hg exceeded the WHO and NSLs. The non-CAR risk assessment was used to order the TMs according to the total target hazard quotient (TTHQ) As > Pb > Cr > Co > Zn > Hg > Ni > Cd. None of the investigated age groups are at risk As there is a low C_avg of all trace metals (i.e., the THQ is > 1). The age groups were ranked based on THQ and incremental lifetime cancer risk (ILCR) As < 1 year, >1-10 years, > 11-19 years, and > + 20 years. The ILCR of As for all the age groups was >10^-4, whereas for Pb it was <10^-6. Cumulative carcinogenic risk (CCR) for As and Pb was at a safe threshold risk (>10^-4) for all the age groups.

Successive preconcentration and mechanistic investigation of Au(iii), Pd(ii), Pt(iv) and Rh(iii) via cloud point extraction using a functionalised ionic liquid

This study proposes the efficient separation of Au(iii)/Pd(ii)/Pt(iv)/Rh(iii) through the 2-mercaptobenzothiazole-functionalised ionic liquid ([C6mim][2MBT]) using a cloud point extraction system.

A Switchable Solvent-Based Liquid Phase Microextraction Method for the Detection of Cadmium in Water Samples with Flame Atomic Absorption Spectrometry

BACKGROUND

The natural concentration of trace elements in water and soil depends on the geological, geomorphological, and climate characteristics of the region. The rapid increase of technology in recent years has increased concentrations of trace elements in nature.

OBJECTIVE

Separation and enrichment methods are needed to detect trace amounts of heavy metals that cannot be detected due to the detection limit of the instruments or the matrix effect in samples. Recently, low hazard solvents compatible with green chemistry have been used in preconcentration/separation studies of Cd(II).

METHODS

Switchable solvent-based liquid phase microextraction is an environmentally-friendly, simple, and fast procedure for the determination of Cd(II) ions in environmental samples combined with flame atomic absorption spectrometry (FAAS).

RESULTS

The switchable polarity solvent was prepared with N,N-dimethyl-n-octylamine. 2-(5-Bromo-2-pyridylazo)-5-(diethylamino) phenol was used as the complexing agent. Important parameters such as pH, amount of switchable polarity solvent and NaOH, as well as ligand and sample volume, all of which might affect the microextraction efficiency were optimized. Under optimal experimental conditions, linear range was found to be between 5 and 500 µg/L. The limit of detection, preconcentration factor, and relative standard deviation were 0.89 μg/L, 150, and 3.2%, respectively.

HIGHLIGHTS

The accuracy of our method was confirmed by the analysis of certified reference material SPS-WW1 Batch 106 (Waste Waters). The developed procedure was successfully applied to determine the cadmium contents of environmental water samples. We believe that this environmentally-friendly method will be useful in detecting Cd(II) ions in water samples.

Application of ultrasonically modified cloud point extraction method for simultaneous enrichment of cadmium and lead in sera of different types of gallstone patients

A novel and greener ultrasonically assisted/modified cloud point extraction procedure for the simultaneous preconcentration of lead and cadmium in serum samples of different types of gallstone patients was developed. The chelates of the under study metals, formerly formed with 8-hydroxyquinoline, were extracted in the micelles of a nonionic surfactant prior to analysis by flame atomic absorption spectrometer (FAAS). After the arrival of the cloud point, the critical micellar mass produced was homogenously dispersed in the aqueous phase with the help of ultrasound energy. The reliability of the developed procedure was tested by relative standard deviation (% RSD), which was found to be <5%. The performance of the proposed procedure was checked by applying to certified reference material and spiking standard in real samples. All the experimental parameters were optimized. The developed procedure of Um-CPE was applied successfully for the analysis of the target heavy metals in serum samples of different types of gallstone patients and referents. The higher levels of the understudy metals were observed in the patients as compared to the referents but the levels of the both metal were found to be considerably higher in patients with pigmented gallstones.

A new tunable dispersive liquid-liquid micro extraction method developed for the simultaneous preconcentration of lead and cadmium from lakes water: a multivariate study

A green tunable dispersive liquid-liquid micro extraction (TDLLME) technique was established for the simultaneous enrichment of lead (Pb) and cadmium (Cd) from different lakes water before analysis by flame atomic absorption spectrometry (FAAS). A solvent known as tunable polarity solvent (TPS), mixture of 1,8-diazabicyclo-[5.4.0]-undec-7-ene (DBU) and 1-decanol, has been employed as extractant in aqueous medium. In first step this mixture can be made polar by slowly bubbling the antisolvent trigger (CO₂) through the solution, which makes a monophasic solution. During this step hydrophobic complexes of the metals with 8-hydroxy quinoline (8-HQ) were extracted by TPS. Then the mixture was switched back to hydrophobic one by heating and/or bubbling nitrogen, turning the mixture into two phases again. In second phase the metals were leached out from the complexes entrapped in TPS, by treating with a solution of nitric acid and exposing the mixture to CO₂, which switched the mixture into single phase. Then N₂ purging and/or heating again turned the mixture into two phases. The acidic aqueous phase containing the metals was introduced to FAAS for analysis, whereas TPS was recycled for next experiment. Different parameters, affecting the efficiency the technique, were optimized by multivariate approach. The method was applied to certified reference material of water and to a real sample spiked with standards of known concentration, to confirm its validity and accuracy. LOD obtained for Pb and Cd were 0.560 and 0.056μgL^-1 respectively. The developed method was applied successfully to the real water samples of two lakes of Sindh, Pakistan.