Experimental and computational analysis of a pharmaceutical-grade shape memory polymer applied to the development of gastroretentive drug delivery systems

3D printed reservoir-like vaginal rings for antibiotic delivery

Targeting the development of 3D printed reservoir-like vaginal rings (VRs) intended to fulfill the needs of precision medicine, prototypes ensuring prolonged release of metronidazole (MTZ) were preliminary manufactured and tested. Indeed, this drug represents the first-line therapy against bacterial vaginosis, which would especially benefit from convenient as well as easy dose adjustment and from more than 48 h continuous release, thus avoiding barely tolerated and repeated administrations. Starting from a soft thermoplastic elastomer (TPE), hollow ring structures were successfully printed at 190 °C and then extemporaneously filled with drug-loaded, in-situ-crosslinking hydrogel formulations based on alginate (ALG). 3 VR designs, differing in dimensions, number of open surfaces as well as in relevant areas were investigated, together with 9 drug-saturated hydrogel formulations containing extra suspended MTZ particles (20-50 %) and increasing ALG concentrations (2-6 %). Manufacturing of final rings was fine-tuned based on materials thermo-mechanical properties. For comparison purposes, hydrogels with analogous composition were either cast using purposely developed molds or 3D printed mimicking the ring design. VR release performance turned out dependent on the drug solubility and on the surface area available for hydrogel contact with vaginal fluids. Interestingly, this surface resulted correlated to both the outer and inner structure of the system. The data collected would provide an effective asset to increase the versatility of reservoir-like VRs, making them a powerful tool towards therapy customization.

4D printing: innovative solutions and technological advances in orthopedic repair and reconstruction, personalized treatment and drug delivery

With precise control of smart materials deformation in time dimension, doctors can customize orthopedic implants. This review focuses on the advances of 4D printing technology in orthopedics, including its applications in bone repair and reconstruction, personalized treatment, and drug delivery. 4D printing enables the creation of bionic scaffolds and fixation devices for bone repair, customized implants matching patients' conditions for personalized treatment, and specific carriers for accurate drug release and delivery, which together contribute to accelerating bone healing, providing exclusive treatments, enhancing therapeutic effects and reducing side effects, thus helping improve orthopedic medicine. It offers comprehensive reference materials for relevant medical personnel.

State-of-the-art and future perspectives in ingestible remotely controlled smart capsules for drug delivery: A GENEGUT review

An emerging concern globally, particularly in developed countries, is the rising prevalence of Inflammatory Bowel Disease (IBD), such as Crohn's disease. Oral delivery technologies that can release the active therapeutic cargo specifically at selected sites of inflammation offer great promise to maximise treatment outcomes and minimise off-target effects. Therapeutic strategies for IBD have expanded in recent years, with an increasing focus on biologic and nucleic acid-based therapies. Reliable site-specific delivery in the gastrointestinal (GI) tract is particularly crucial for these therapeutics to ensure sufficient concentrations in the targeted cells. Ingestible smart capsules hold great potential for precise drug delivery. Despite previous unsuccessful endeavours to commercialise drug delivery smart capsules, the current rise in demand and recent advancements in component development, manufacturing, and miniaturisation have reignited interest in ingestible devices. Consequently, this review analyses the advancements in various mechanical and electrical components associated with ingestible smart drug delivery capsules. These components include modules for device localisation, actuation and retention within the GI tract, signal transmission, drug release, power supply, and payload storage. Challenges and constraints associated with previous capsule design functionality are presented, followed by a critical outlook on future design considerations to ensure efficient and reliable site-specific delivery for the local treatment of GI disorders.

Polyvinyl alcohol-based capsule shells manufactured by injection molding as ready-to-use moisture barriers for the development of delivery systems

In this work, feasibility of injection molding was demonstrated for manufacturing capsule shells. 600 µm-thick prototypes were successfully molded with pharmaceutical-grade low-viscosity polyvinyl alcohols (PVAs), possibly added with a range of different fillers. They showed reproducible weight and thickness (CV < 2 and 5, respectively), compliant behavior upon piercing (holes diameter analogous to the reference), tunable release performance (immediate and pulsatile), and moisture protection capability. To assess the latter, an on-line method relying on near infrared spectroscopy measurements was set-up and validated. Based on the data collected and considering the versatility IM would provide for product shape/thickness/composition, PVA-based molded shells could help widening the portfolio of ready-to-use capsules, representing an interesting alternative to those commercially available. Indeed, these capsules could be filled with various formulations, even those with stability issues, and intended either for oral administration or for pulmonary delivery via single-dose dry powder inhalers.

Development of a multi-component gastroretentive expandable drug delivery system (GREDDS) for personalized administration of metformin

OBJECTIVES

Efficacy and compliance of type II diabetes treatment would greatly benefit from dosage forms providing controlled release of metformin in the upper gastrointestinal tract. In this respect, the feasibility of a new system ensuring stomach-retention and personalized release of this drug at its absorption window for multiple days was investigated.

METHODS

The system proposed comprised of a drug-containing core and a viscoelastic umbrella-like skeleton, which were manufactured by melt-casting and 3D printing. Prototypes, alone or upon assembly and insertion into commercially-available capsules, were characterized for key parameters: thermo-mechanical properties, accelerated stability, degradation, drug release, deployment performance, and resistance to simulated gastric contractions.

RESULTS

Each part of the system was successfully manufactured using purposely-selected materials and the performance of final prototypes matched the desired one. This included: i) easy folding of the skeleton against the core in the collapsed administered shape, ii) rapid recovery of the cumbersome configuration at the target site, even upon storage, and iii) prolonged release of metformin.

CONCLUSIONS

Composition, geometry, and performance of the system developed in this work were deemed acceptable for stomach-retention and prolonged as well as customizable release of metformin in its absorption window, laying promising bases for further development steps.

Towards 4D printing in pharmaceutics

Four-dimensional printing (4DP) is emerging as an innovative research topic. It involves the use of smart materials for three-dimensional printing (3DP) of items that change their shape after production, in a programmed way over time, when exposed to appropriate external non-mechanical stimuli (moisture, electric or magnetic fields, UV, temperature, pH or ion composition). In the performance of 4D printed devices, time is involved as the 4th dimension. 4D smart structures have been known for many years in the scientific literature, well before the advent of 3D printing, and the concepts of shape evolution as well as self-assembly have been applied to drug delivery at the nano-, micro- and macro-scale levels. The neologism "4DP" was coined by Tibbits, Massachusetts Institute of Technology, in 2013, who also showed the earliest examples of 4D printed objects. Since then, smart materials have often been combined with additive manufacturing, which makes production of complex shapes easy to achieve: going beyond 3DP, 4D printed items are no static objects. Two main categories of raw materials have been employed for 4DP: shape memory polymers (SMPs) and shape morphing hydrogels (SMHs). In principle, all types of 3D printers could be used for 4DP. In this article, examples of systems for use in the biomedical field, such as stents and scaffolds, and in drug delivery are reviewed, with special emphasis on indwelling devices for retention in the urinary bladder and in the stomach.

Thermo-Mechanical Characterization of 4D-Printed Biodegradable Shape-Memory Scaffolds Using Four-Axis 3D-Printing System

This study was conducted on different models of biodegradable SMP (shape-memory polymer) scaffolds. A comparison was conducted utilizing a basic FDM (fused deposition modeling)/MEX (material extrusion) printer with a standard printing technique and a novel, modified, four-axis printing method with a PLA (poly lactic acid) polymer as the printing material. This way of making the 4D-printed BVS (biodegradable vascular stent) made it possible to achieve high-quality surfaces due to the difference in printing directions and improved mechanical properties-tensile testing showed a doubling in the elongation at break when using the four-axis-printed specimen compared to the regular printing, of 8.15 mm and 3.92 mm, respectfully. Furthermore, the supports created using this method exhibited a significant level of shape recovery following thermomechanical programming. In order to test the shape-memory effect, after the thermomechanical programming, two approaches were applied: one approach was to heat up the specimen after unloading it inside temperature chamber, and the other was to heat it in a warm bath. Both approaches led to an average recovery of the original height of 99.7%, while the in-chamber recovery time was longer (120 s) than the warm-bath recovery (~3 s) due to the more direct specimen heating in the latter case. This shows that 4D printing using the newly proposed four-axis printing is an effective, promising technique that can be used in the future to make biodegradable structures from SMP.

Hydrophilic High Drug-Loaded 3D Printed Gastroretentive System with Robust Release Kinetics

Three-dimensional printing (3DP) technology enables an important improvement in the design of new drug delivery systems, such as gastroretentive floating tablets. These systems show a better temporal and spatial control of the drug release and can be customized based on individual therapeutic needs. The aim of this work was to prepare 3DP gastroretentive floating tablets designed to provide a controlled release of the API. Metformin was used as a non-molten model drug and hydroxypropylmethyl cellulose with null or negligible toxicity was the main carrier. High drug loads were assayed. Another objective was to maintain the release kinetics as robust as possible when varying drug doses from one patient to another. Floating tablets using 10–50% w/w drug-loaded filaments were obtained by Fused Deposition Modelling (FDM) 3DP. The sealing layers of our design allowed successful buoyancy of the systems and sustained drug release for more than 8 h. Moreover, the effect of different variables on the drug release behaviour was studied. It should be highlighted that the robustness of the release kinetics was affected by varying the internal mesh size, and therefore the drug load. This could represent a step forward in the personalization of the treatments, a key advantage of 3DP technology in the pharmaceutical field.

Insights into the Safety and Versatility of 4D Printed Intravesical Drug Delivery Systems

This paper focuses on recent advancements in the development of 4D printed drug delivery systems (DDSs) for the intravesical administration of drugs. By coupling the effectiveness of local treatments with major compliance and long-lasting performance, they would represent a promising innovation for the current treatment of bladder pathologies. Being based on a shape-memory pharmaceutical-grade polyvinyl alcohol (PVA), these DDSs are manufactured in a bulky shape, can be programmed to take on a collapsed one suitable for insertion into a catheter and re-expand inside the target organ, following exposure to biological fluids at body temperature, while releasing their content. The biocompatibility of prototypes made of PVAs of different molecular weight, either uncoated or coated with Eudragit®-based formulations, was assessed by excluding relevant in vitro toxicity and inflammatory response using bladder cancer and human monocytic cell lines. Moreover, the feasibility of a novel configuration was preliminarily investigated, targeting the development of prototypes provided with inner reservoirs to be filled with different drug-containing formulations. Samples entailing two cavities, filled during the printing process, were successfully fabricated and showed, in simulated urine at body temperature, potential for controlled release, while maintaining the ability to recover about 70% of their original shape within 3 min.

Advances in 4D printing: from stimulation to simulation

The advancement of four-dimensional (4D) printing has been fueled by the rise in demand for additive manufacturing and the expansion in shape-memory materials. The printing of smart substances that respond to external stimuli is known as 4D printing. 4D printing allows highly controlled shapes to simulate the physiological milieu by adding time dimensions. The 4D printing is suitable with current progress in smart compounds, printers, and its mechanism of action. The 4D printing paradigm, a revolutionary enhancement of 3D printing, was anticipated by various engineering disciplines. Tissue engineering, medicinal, consumer items, aerospace, and organ engineering use 4D printing technology. The current review mainly focuses on the basics of 4D printing and the methods used therein. It also discusses the time-dependent behavior of stimulus-sensitive compounds, which are widely used in 4D printing. In addition, this review highlights material aspects, specifically related to shape-memory polymers, stimuli-responsive materials (classified as physical, chemical, and biological), and modified materials, the backbone of 4D printing technology. Finally, potential applications of 4D printing in the biomedical sector are also discussed with challenges and future perspectives.

The clinical significance of 4D printing

4D printing is the next step on from 3D printing involving the fourth dimension of 'time'. The programmed 4D-printed objects are capable of changing their shape in response to external stimuli, such as light, heat, or water, differentiating them from 3D-printed static objects. This technique promises new possibilities for cancer treatment, drug delivery, stent development, and tissue engineering. In this review, we focus on the development of 4D-printed objects, their clinical use, and the possibility of 5D printing, which could revolutionize the fields of biomedical engineering and drug delivery.

Expandable Drug Delivery Systems Based on Shape Memory Polymers: Impact of Film Coating on Mechanical Properties and Release and Recovery Performance

Retentive drug delivery systems (DDSs) are intended for prolonged residence and release inside hollow muscular organs, to achieve either local or systemic therapeutic goals. Recently, formulations based on shape memory polymers (SMPs) have gained attention in view of their special ability to recover a shape with greater spatial encumbrance at the target organ (e.g., urinary bladder or stomach), triggered by contact with biological fluids at body temperature. In this work, poly(vinyl alcohol) (PVA), a pharmaceutical-grade SMP previously shown to be an interesting 4D printing candidate, was employed to fabricate expandable organ-retentive prototypes by hot melt extrusion. With the aim of improving the mechanical resistance of the expandable DDS and slowing down relevant drug release, the application of insoluble permeable coatings based on either Eudragit^® RS/RL or Eudragit^® NE was evaluated using simple I-shaped specimens. The impact of the composition and thickness of the coating on the shape memory, swelling, and release behavior as well as on the mechanical properties of these specimens was thoroughly investigated and the effectiveness of the proposed strategy was demonstrated by the results obtained.

Administration strategies and smart devices for drug release in specific sites of the upper GI tract

Targeting the release of drugs in specific sites of the upper GI tract would meet local therapeutic goals, improve the bioavailability of specific drugs and help overcoming compliance-related limitations, especially in chronic illnesses of great social/economic impact and involving polytherapies (e.g. Parkinson's and Alzeimer's disease, tubercolosis, malaria, HIV, HCV). It has been traditionally pursued using gastroretentive (GR) systems, i.e. low-density, high-density, magnetic, adhesive and expandable devices. More recently, the interest towards oral administration of biologics has prompted the development of novel drug delivery systems (DDSs) provided with needles and able to inject different formulations in the mucosa of the upper GI tract and particularly of esophagus, stomach or small intestine. Besides comprehensive literature analysis, DDSs identified as smart devices in view of their high degree of complexity in terms of design, working mechanism, materials employed and manufacturing steps were discussed making use of graphic tools.

Novel Composite Planks Made of Shape Memory Polyurethane Foaming Material with Two-Step Foaming Process

In this study, shape memory polyurethane (SMP) foaming material is used as the main material that is incorporated with carbon fiber woven fabrics via two-step foaming method, forming sandwich-structured composite planks. The process is simple and efficient and facilitates any composition as required. The emphasis of this study is protection performances, involving puncture resistance, buffer absorption, and electromagnetic wave shielding effectiveness. The proposed soft PU foam composite planks consist of the top and bottom PU foam layers and an interlayer of carbon fiber woven fabric. Meanwhile, PU foam is incorporated with carbon staple fibers and an aluminized PET film for reinforcement requirements and electromagnetic wave shielding effectiveness, respectively. Based on the test results, the two-step foaming process can provide the PU foam composite planks with excellent buffer absorption, puncture resistance, and electromagnetic wave shielding effectiveness; therefore, the proposed composite planks contribute a novel structure composition to SMP, enabling it to be used as a protective composite. In addition, the composites contain conductive material and thus exhibit a greater diversity of functions.

Volumetric Additive Manufacturing of Shape Memory Polymers

Shape memory polymers (SMPs) are stimuli responsive materials with programmable recovery from a deformed state. SMP behavior is often impacted by manufacturing features like layering that can impart anisotropic responses....

Dataset on a Small-Scale Film-Coating Process Developed for Self-Expanding 4D Printed Drug Delivery Devices

Film-coating is widely applied in pharmaceutics to enhance aspect/taste and mechanical properties of dosage forms, to protect them from the environment and to modify their release performance. In this respect, a film-coating process was recently involved in the development of 4D printed prolonged-release systems intended for organ retention. During coating processes, liquid formulations are sprayed onto moving cores, whose shape, weight and surface characteristics are essential to attain a homogeneous film. Devices of complex shapes, composed of smart materials and fabricated by hot-processing techniques, such as extrusion and fused deposition modeling 3D printing, might be poorly compatible with the requirements of traditional coating methods, e.g., need for spherical substrates with smooth surface and stable under process temperatures. This work was aimed at evaluating, at a small scale level, the feasibility of a versatile equipment for film-coating of rod-shaped extruded and printed prototypes with different section. Equipment design and set up of process parameters were performed starting from polymeric solutions and suspensions and selecting as cores 50 mm-long rod-shaped samples based on shape memory poly(vinyl alcohol). Integrity and thickness of the applied layer and its impact on shape memory and release performance of prototypes were investigated.