29Si NMR in solid state with CPMG acquisition under MAS

Solid-state NMR methods for the characterization of bioconjugations and protein-material interactions

Protein solid-state NMR has evolved dramatically over the last two decades, with the development of new hardware and sample preparation methodologies. This technique is now ripe for complex applications, among which one can count bioconjugation, protein chemistry and functional biomaterials. In this review, we provide our account on this aspect of protein solid-state NMR.

Deuteration for High-Resolution Detection of Protons in Protein Magic Angle Spinning (MAS) Solid-State NMR

Proton detection developed in the last 20 years as the method of choice to study biomolecules in the solid state. In perdeuterated proteins, proton dipolar interactions are strongly attenuated, which allows yielding of high-resolution proton spectra. Perdeuteration and backsubstitution of exchangeable protons is essential if samples are rotated with MAS rotation frequencies below 60 kHz. Protonated samples can be investigated directly without spin dilution using proton detection methods in case the MAS frequency exceeds 110 kHz. This review summarizes labeling strategies and the spectroscopic methods to perform experiments that yield assignments, quantitative information on structure, and dynamics using perdeuterated samples. Techniques for solvent suppression, H/D exchange, and deuterium spectroscopy are discussed. Finally, experimental and theoretical results that allow estimation of the sensitivity of proton detected experiments as a function of the MAS frequency and the external B₀ field in a perdeuterated environment are compiled.

Frequency-Swept Ultra-Wideline Magic-Angle Spinning NMR Spectroscopy

Recent years have witnessed the development of solid-state NMR techniques that allow the direct investigation of extremely wide inhomogeneously broadened resonance lines. To date, this typically involves the application of frequency sweeps as offered by wideband uniform rate smooth truncation (WURST) pulses. While the effects of such advanced irradiation schemes on static samples are well understood, the interference between the varying carrier frequency and the time-dependent evolution of the spin system under magic-angle spinning (MAS) conditions is more complex. Herein, we introduce the well-known WURST-Carr-Purcell-Meiboom-Gill (WCPMG) pulse sequence for spinning samples. Using numerical spin-density matrix analysis, an ideal design based on fast frequency sweeps and high truncation of the incorporated WURST pulses is presented that enables uniform excitation/refocusing under MAS conditions with low-to-moderate radio-frequency power requirements. This permits the acquisition of ultra-wideline MAS NMR lines exceeding 500 kHz with chemical shift resolution in a single transmitter step.

Quantification of Uncoupled Spin Domains in Spin-Abundant Disordered Solids

Materials often contain minor heterogeneous phases that are difficult to characterize yet nonetheless significantly influence important properties. Here we describe a solid-state NMR strategy for quantifying minor heterogenous sample regions containing dilute, essentially uncoupled nuclei in materials where the remaining nuclei experience heteronuclear dipolar couplings. NMR signals from the coupled nuclei are dephased while NMR signals from the uncoupled nuclei can be amplified by one or two orders of magnitude using Carr-Meiboom-Purcell-Gill (CPMG) acquisition. The signal amplification by CPMG can be estimated allowing the concentration of the uncoupled spin regions to be determined even when direct observation of the uncoupled spin NMR signal in a single pulse experiment would require an impractically long duration of signal averaging. We use this method to quantify residual graphitic carbon using 13C CPMG NMR in poly(carbon monofluoride) samples synthesized by direct fluorination of carbon from various sources. Our detection limit for graphitic carbon in these materials is better than 0.05 mol%. The accuracy of the method is discussed and comparisons to other methods are drawn.

When organophosphorus ruthenium complexes covalently bind to ruthenium nanoparticles to form nanoscale hybrid materials

A hybrid material made of mononuclear organophosphorus polypyridyl ruthenium complexes covalently bonded to ruthenium nanoparticles has been synthesized via a one-pot organometallic procedure and finely characterized. These results open new avenues to access unique hybrid transition metal nanomaterials.

Multivariate Curve Resolution for 2D Solid-State NMR spectra

We present a processing method, based on the multivariate curve resolution approach (MCR), to denoise 2D solid-state NMR spectra, yielding a substantial S/N ratio increase while preserving the lineshapes and relative signal intensities. These spectral features are particularly important in the quantification of silicon species, where sensitivity is limited by the low natural abundance of the ²⁹Si nuclei and by the dilution of the intrinsic protons of silica, but can be of interest also when dealing with other intermediate-to-low receptivity nuclei. This method also offers the possibility of coprocessing multiple 2D spectra that have the signals at the same frequencies but with different intensities (e.g.: as a result of a variation in the mixing time). The processing can be carried out on the time-domain data, thus preserving the possibility of applying further processing to the data. As a demonstration, we have applied Cadzow denoising on the MCR-processed FIDs, achieving a further increase in the S/N ratio and more effective denoising also on the transients at longer indirect evolution times. We have applied the combined denoising on a set of experimental data from a lysozyme-silica composite.

Sensitivity enhancement via multiple contacts in the {1H–29Si}–1H cross polarization experiment: a case study of modified silica nanoparticle surfaces

{¹H–²⁹Si}–¹H double cross polarization inverse detection (DCPi) solid-state NMR, has recently been shown to be a powerful tool for studying molecules adsorbed on the silica surface. In this contribution, we develop an improved version (MCPi) which incorporates a block of multiple contact pulses, and quantitatively compare the sensitivities of MCPi and DCPi over a typical range of experimental parameters. The MCPi pulse sequence aims at higher sensitivity and robustness for studying samples with various relaxation characteristics. In the case of dimethyl sulfoxide (DMSO) molecules adsorbed on the silica surface, MCPi performs equally well or up to 2.5 times better than DCPi over a wide range of parameters. The applicability to and performance of MCPi on composite materials was demonstrated using a sample of polymer–silica composite, where significantly higher sensitivity could be achieved at very long total mixing times. The results also showed that both techniques are surface specific in the sense that only the groups close to the surface can be detected.

In this paper we demonstrate {¹H–²⁹Si}–¹H multiple cross polarization inverse detection (MCPi) solid state NMR as a robust technique for studying modified silica nanoparticle surfaces.

Improved sensitivity and quantification for 29Si NMR experiments on solids using UDEFT (Uniform Driven Equilibrium Fourier Transform)

We demonstrate the possibility to use UDEFT (Uniform Driven Equilibrium Fourier Transform) technique in order to improve the sensitivity and the quantification of one-dimensional ²⁹Si NMR experiments under magic-angle spinning (MAS). We derive an analytical expression of the signal-to-noise ratios of UDEFT and single-pulse (SP) experiments subsuming the contributions of transient and steady-state regimes. Using numerical spin dynamics simulations and experiments on ²⁹Si-enriched amorphous silica and borosilicate glass, we show that 59₁₈₀298₀59₁₈₀ refocusing composite π-pulse and the adiabatic inversion using tanh/tan modulation improve the robustness of UDEFT technique to rf-inhomogeneity, offset, and chemical shift anisotropy. These pulses combined with a two-step phase cycle limit the pulse imperfections and the artifacts produced by stimulated echoes. The sensitivity of SP, UDEFT and CPMG (Carr-Purcell-Meiboom-Gill) techniques are experimentally compared on functionalized and non-functionalized mesoporous silica. Furthermore, experiments on a flame retardant material prove that UDEFT technique provides a better quantification of ²⁹Si sites with higher sensitivity than SP method.

N-Heterocyclic Carbenes in Materials Chemistry

N-Heterocyclic carbenes (NHCs) have become one of the most widely studied class of ligands in molecular chemistry and have found applications in fields as varied as catalysis, the stabilization of reactive molecular fragments, and biochemistry. More recently, NHCs have found applications in materials chemistry and have allowed for the functionalization of surfaces, polymers, nanoparticles, and discrete, well-defined clusters. In this review, we provide an in-depth look at recent advances in the use of NHCs for the development of functional materials.

One- and Two-Dimensional High-Resolution NMR from Flat Surfaces

Determining atomic-level characteristics of molecules on two-dimensional surfaces is one of the fundamental challenges in chemistry. High-resolution nuclear magnetic resonance (NMR) could deliver rich structural information, but its application to two-dimensional materials has been prevented by intrinsically low sensitivity. Here we obtain high-resolution one- and two-dimensional ³¹P NMR spectra from as little as 160 picomoles of oligonucleotide functionalities deposited onto silicate glass and sapphire wafers. This is enabled by a factor >10⁵ improvement in sensitivity compared to typical NMR approaches from combining dynamic nuclear polarization methods, multiple-echo acquisition, and optimized sample formulation. We demonstrate that, with this ultrahigh NMR sensitivity, ³¹P NMR can be used to observe DNA bound to miRNA, to sense conformational changes due to ion binding, and to follow photochemical degradation reactions.

Direct Observation of Tin in Different T-Sites of Sn-BEA by One- and Two-Dimensional 119Sn MAS NMR Spectroscopy

The direct and quantitative identification of active sites is crucial for the development of zeolite catalysts and their implementation in industry. Herein we report on the application of one-dimensional ¹¹⁹Sn direct polarization (DP) and rotational echo double-resonance (REDOR) and two-dimensional ¹¹⁹Sn magic-angle tuning (MAT) NMR spectroscopy for the identification of different Sn sites in fully dehydrated Sn-BEA zeolite. It is demonstrated that ¹¹⁹Sn magic-angle spinning (MAS) NMR techniques, modified by Carr-Purcell-Meiboom-Gill (CPMG) echo-train acquisition allow to resolve three groups of NMR signals, which can be attributed to three groups of nonequivalent T-sites based on the existing theoretical predictions: (I) T9, T4, and T3; (II) T2, T1, and T8; and (III) T7, T5, and T6. Results suggest that the sites attributed to group III are the most populated in Sn-BEA samples obtained via the fluoride route. The attribution of NMR lines to different T-sites in the structure of BEA allows for the establishment of structure-reactivity relationship and therefore for further improvement of Sn-BEA catalysts.

Rapid acquisition of data dense solid-state CPMG NMR spectral sets using multi-dimensional statistical analysis

The development of multi-dimensional statistical methods has been demonstrated on variable contact time (VCT) 29Si{1H} cross-polarization magic angle spinning (CP/MAS) data sets collected using Carr-Purcell-Meiboom-Gill (CPMG) type acquisition. These methods utilize the transformation of the collected 2D VCT data set into a 3D data set and use tensor-rank decomposition to extract the spectral components that vary as a function of transverse relaxation time (T2) and CP contact time. The result is a data dense spectral set that can be used to reconstruct CP/MAS spectra at any contact time with a high signal to noise ratio and with an excellent agreement to 29Si{1H} CP/MAS spectra collected using conventional acquisition. These CPMG data can be collected in a fraction of time that would be required to collect a conventional VCT data set. We demonstrate the method on samples of functionalized mesoporous silica materials and show that the method can provide valuable surface specific information about their functional chemistry.

Zwitterionic amidinates as effective ligands for platinum nanoparticle hydrogenation catalysts

Pt NPs covered with zwitterionic amidinates as ligands exhibit an exciting ligand effect in the hydrogenation of carbonyl groups when electron donor/acceptor groups are introduced in the N-substituents.

Ligand control of metal nanoparticles (MNPs) is rapidly gaining importance as ligands can stabilize the MNPs and regulate their catalytic properties. Herein we report the first example of Pt NPs ligated by imidazolium-amidinate ligands that bind strongly through the amidinate anion to the platinum surface atoms. The binding was established by ¹⁵N NMR spectroscopy, a precedent for nitrogen ligands on MNPs, and XPS. Both monodentate and bidentate coordination modes were found. DFT showed a high bonding energy of up to –48 kcal mol^–1 for bidentate bonding to two adjacent metal atoms, which decreased to –28 ± 4 kcal mol^–1 for monodentate bonding in the absence of impediments by other ligands. While the surface is densely covered with ligands, both IR and ¹³C MAS NMR spectra proved the adsorption of CO on the surface and thus the availability of sites for catalysis. A particle size dependent Knight shift was observed in the ¹³C MAS NMR spectra for the atoms that coordinate to the surface, but for small particles, ∼1.2 nm, it almost vanished, as theory for MNPs predicts; this had not been experimentally verified before. The Pt NPs were found to be catalysts for the hydrogenation of ketones and a notable ligand effect was observed in the hydrogenation of electron-poor carbonyl groups. The catalytic activity is influenced by remote electron donor/acceptor groups introduced in the aryl-N-substituents of the amidinates; p-anisyl groups on the ligand gave catalysts several times faster the ligand containing p-chlorophenyl groups.

Characterization of secondary phosphine oxide ligands on the surface of iridium nanoparticles

The coordination mode of secondary phosphine oxide ligands on the surface of iridium nanoparticle catalysts was elucidated by solid-state NMR.

Spatial distribution of organic functional groups supported on mesoporous silica nanoparticles: a study by conventional and DNP-enhanced 29Si solid-state NMR

DNP-enhanced solid-state NMR determined spatial distributions of organic functionalities attached to surfaces of mesoporous silica nanoparticles via co-condensation and grafting.

Application of (119)Sn CPMG MAS NMR for Fast Characterization of Sn Sites in Zeolites with Natural (119)Sn Isotope Abundance

(119)Sn CPMG MAS NMR is demonstrated to be a fast and efficient method for characterization of Sn-sites in Sn-containing zeolites. Tuning of the CPMG echo-train sequence decreases the experimental time by a factor of 5-40 in the case of as-synthesized and hydrated Sn-BEA samples and by 3 orders of magnitude in the case of dehydrated Sn-BEA samples as compared to conventional methods. In the latter case, the reconstruction of the quantitative spectrum without the loss of sensitivity is shown to be possible. The method proposed allows obtaining (119)Sn MAS NMR spectra with improved resolution for Sn-BEA zeolites with natural (119)Sn isotope abundance using conventional MAS NMR equipment.

Dynamics in the solid-state: perspectives for the investigation of amyloid aggregates, membrane proteins and soluble protein complexes

Aggregates formed by amyloidogenic peptides and proteins and reconstituted membrane protein preparations differ significantly in terms of the spectral quality that they display in solid-state NMR experiments. Structural heterogeneity and dynamics can both in principle account for that observation. This perspectives article aims to point out challenges and limitations, but also potential opportunities in the investigation of these systems.

77Se solid-state NMR investigations on As(x)Se(1-x) glasses using CPMG acquisition under MAS

(77)Se (I=1/2) solid-state NMR is a very sensitive probe of the local structure of selenide glasses, which themselves are promising for optical applications. In this work, we show that although (77)Se has a low natural abundance (7.58%) and a wide spectral range, the sensitivity can be dramatically increased using Carr-Purcell-Meiboom-Gill (CPMG) trains of rotor-synchronized π pulses during the detection of (77)Se magnetization but may be affected by chemical shift anisotropy when the Magic Angle Spinning rate is not fast enough and by offset effects. The indirect dimension of the T(2)(CPMG)-resolved spectrum shows a strong influence of the J-couplings between naturally occurring (77)Se pairs. The resulting spectra show that the structural model known as "chains crossing model" is not entirely suitable to describe the glassy network of the Se-rich compositions.

Molecular ordering of mixed surfactants in mesoporous silicas: a solid-state NMR study

The use of mixed surfactants in the synthesis of mesoporous silica nanoparticles (MSNs) is of importance in the context of adjusting pore structures, sizes and morphologies. In the present study, the arrangement of molecules in micelles produced from a mixture of two surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB) was detailed by solid-state NMR spectroscopy. Proximities of methyl protons in the trimethylammonium headgroup of CTAB and protons in the pyridinium headgroup of CPB were observed under fast magic angle spinning (MAS) by (1)H-(1)H double quantum (DQ) MAS NMR and NOESY. This result suggested that CTAB and CPB co-exist in the pores without forming significant monocomponent domain structures. (1)H-(29)Si heteronuclear correlation (HETCOR) NMR showed that protons in the headgroups of CTAB are in closer proximity to the silica surface than those in the CPB headgroups. The structural information obtained in this investigation leads to better understanding of the mechanisms of self-assembly and their role in determining the structure and morphology of mesoporous materials.

Solid-state nuclear magnetic resonance studies of vinyl polymer/silica colloidal nanocomposite particles

Solid-state nuclear magnetic resonance (NMR) has been used to characterize the interface between the organic and inorganic components of "core-shell" colloidal nanocomposite particles synthesized by in situ aqueous (co)polymerization of styrene and/or n-butyl acrylate in the presence of a glycerol-functionalized silica sol. Polymer protons are in close proximity (<5 A) to surface silanol sites in all the nanocomposites studied, indicating that either styrene or n-butyl side groups extend between the glycerol-functional silane molecules toward the surface of the silica particles. For the poly(styrene-co-n-butyl acrylate)/silica nanocomposite n-butyl acrylate residues are located closer to the surface of the silica particle than styrene residues, suggesting a specific interaction between the former and the glycerol-functionalized silica surface. The most likely explanation is a hydrogen bond between the ester carbonyl and the glycerol groups, although this cannot be observed directly. For the Bindzil CC40 glycerol-functionalized silica sol the relative intensities of (29)Si NMR lines corresponding to T and Q(3) environments imply that there are approximately twice as many unreacted silanol groups on the silica surface as attached silane molecules.

On the practical aspects of recording wideline QCPMG NMR spectra

The practical aspects of applying CPMG for acquisition of wideline powder patterns are examined. It is shown that most distortions/modulations of spikelet spectra can be traced to the incoherent signal averaging from multiple coherence transfer pathways. A strategy for minimizing these distortions/modulations is described. Also, a few interesting observations regarding the implementation of the wideline WURST-QCPMG experiment are presented, namely the accumulation of second-order signal phase and the effects of varying the sweep rate and rf field of chirp pulses.

A solid-state NMR investigation of the structure of mesoporous silica nanoparticle supported rhodium catalysts

A detailed study of the chemical structure of mesoporous silica catalysts containing rhodium ligands and nanoparticles (RhP-MSN) was carried out by multi-dimensional solid-state NMR techniques. The degree of functionalization of the rhodium-phosphinosilyl complex to the surface of the RhP-MSN channels was determined by (29)Si NMR experiments. The structural assignments of the rhodium-phosphinosilyl complex were unambiguously determined by employing the novel, indirectly detected heteronuclear correlation ((13)C-(1)H and (31)P-(1)H idHETCOR) techniques, which indicated that oxidation of the attached phosphinosilyl groups and detachment of Rh was enhanced upon syngas conversion.