Root and root canal morphology of the human permanent maxillary first molar: a literature review

Anatomic relationship between the root apex of maxillary molars and maxillary sinus in the presence of antagonist teeth: A Kwak's method with divisions

OBJECTIVE

The purpose of the study was to evaluate the proximity between the root apices of maxillary molars and maxillary sinus floor using cone-beam computed tomography (CBCT) in the southern Turkish subpopulation.

DESIGN

For the study, 246 CBCT images were analyzed. The absence of antagonist teeth was excluded. Kwak's types III and V were detailed with three divisions. Division M; the penetration of the mesial root only, Division D; the penetration of the distal root only, and Division MD; the penetration of both buccal roots. The distance between the maxillary sinus and the root apices was measured. Student's t-test, one-way ANOVA, and chi-square were used for statistical analysis.

RESULTS

The penetration of maxillary molars was 24.40%. The highest prevalence belonging to Type I. Division MD was 44.35% for Type III and 40.42% for Type V. Division M was higher than Division D. The distances between the sinus and root apices were 1.35-2.41 mm in Type I. The distance decreased with age (p < 0.05).

CONCLUSION

Both buccal root penetration into the sinus was higher than the single root penetration. The distance of the second molar root apices to the sinus was closer than the first molar. One-quarter of the first and second molars were inside the sinus. A greater likelihood of penetration of the root apices into the sinus with increased age.

A micro-computed tomographic evaluation of maxillary first molar root canal morphology in Black South Africans

PURPOSE

This study was conducted to investigate the root canal anatomy of maxillary first molars in Black South Africans.

METHODS

Micro-computed tomography was used to investigate 101 maxillary first molars (53 teeth from the right, 48 from the left; 50 male and 51 female teeth). The number of root canals in each tooth was determined, and the relationship between side, sex and age was analyzed using chi-squared test. To determine intra- and inter-observer reliability, Cohen's kappa coefficients were calculated.

RESULTS

Intra- and inter-rater agreements of 96.92% and 98.08% were achieved, respectively. Most teeth contained either three or four canals, but a second, third and fourth mesio-buccal canal was found in 60.39%, 5.94% and 0.99% of teeth, respectively. The disto-buccal and palatal roots contained predominantly single canals, but additional canals were noted in 2.97% and 1.98% of teeth. Four canals were common in females and teeth on the right side often contained a second mesio-buccal canal. However, the prevalence of a third mesio-buccal canal was higher in males than in females.

CONCLUSION

The teeth studied showed diversity and variations between sexes and arch sides. These findings will aid clinicians in endodontic treatment and will be applicable for educational purposes.

A Rare Case of Single-Rooted Maxillary First Molar With Type II Canal Configuration

The morphological variations in roots and root canals vary greatly in multi-rooted teeth making it a challenge for accurate diagnosis and effective endodontic therapy. In addition to using technology appropriately, this article highlights how important it is to have a complete understanding of root canal morphology. With the assistance of cone-beam computed tomography (CBCT) images and a dental operating microscope (DOM), successful endodontic treatment was performed on a single-rooted maxillary first molar with Vertucci's type II canal configuration. CBCT and DOM proved to be valuable tools for the effective diagnosis and management of this atypical morphology.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study

BACKGROUND

In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations.

METHODS

From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology.

RESULTS

The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars.

CONCLUSION

This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Endodontic management of a maxillary first molar with three roots and six root canals

Variations in the root canal anatomy of a maxillary first molar are often challenging to diagnose and treat; thus, clinicians must have a thorough knowledge of the same. This case report highlights the successful nonsurgical endodontic management of a maxillary first molar with an unusual morphology of three roots and six root canals. A total of six root canals (mesiobuccal [MB] 1, MB2, MB3, distobuccal [DB] 1, DB2, and palatal) were detected after initiating root canal therapy and access cavity preparation. Conventional root canal treatment was completed, and postoperative cone-beam computed tomography scanning was done to verify the total number of canals and ensure the adequacy of root canal fillings. Managing such cases with rare variations in the root canal systems could be arduous and thus, clinicians should be well-versed in the methods to identify and manage such complexities to facilitate the successful outcomes of endodontic treatment.

Retrospective study of the morphology of third maxillary molars among the population of Lower Silesia based on analysis of cone beam computed tomography

INTRODUCTION

Understanding the anatomy of root canal systems and being aware of their variations is crucial for successful endodontic treatment. Specifically, the intricate and diverse nature of the root anatomy in maxillary third molars poses a significant challenge for dental clinicians. The study analyzed the morphology of the root canal system in maxillary third molars among residents of the Lower Silesia region in Poland using cone beam computed tomography (CBCT).

MATERIAL AND METHODS

This retrospective cross-sectional imaging study was conducted at the X-Ray Diagnostics Laboratory of the Academic Dental Polyclinic of Wroclaw Medical University, Poland. The study evaluated 316 CBCT scans and included 196 maxillary third molars. They were obtained from 118 females and 78 males over the age of 18, in the period from January to April 2022 (three consecutive months). The number of roots, root canals, and root canal configurations according to Vertucci's classification were analyzed.

RESULTS

Three-rooted maxillary molars were found most often (64.29%), followed by single-rooted (24.49%), two-rooted (7.65%), and four-rooted (3.57%) teeth. Among all the roots examined, Vertucci Type I root canals were the most prevalent. Our research found that single-rooted forms (40 teeth, 33.89% vs. 8 teeth, 10.26%, p = 0.0013) of maxillary third molars were significantly more common in females than in males. However, three-rooted forms (62 teeth, 79.49% vs. 64 teeth, 54.24%, p = 0.0013) of maxillary third molars were significantly more common in males than in females.

DISCUSSION

In the Lower Silesia region, the typical maxillary third molar in the Polish population has a three-rooted structure with Vertucci Type I root canal configuration. We noted a sex-dependent correlation in maxillary third molar morphology, with single-rooted forms more prevalent in women and three-rooted forms in men.

The Correlation between Intraorifice Distance and the Anatomical Characteristics of the Second Mesiobuccal Canal of Maxillary Molars: A CBCT Study

Introduction

Missing anatomy is one of the main causes of endodontic failures, and accurate knowledge of teeth anatomy is a prerequisite for adequate root canal treatment. The aim of the present cone beam computed tomography (CBCT) study was to describe the anatomical characteristics of the mesiobuccal (MB) root canals of maxillary molars and to understand if a correlation exists between the position of the canal orifices and the anatomical features of the root.

Methods

For the purposes of the study, a total of 100 CBCT scans of maxillary molars with two MB canals were selected and studied. The features of root canal anatomy of the MB root of the same teeth were analyzed and recorded (root length, confluence, and Vertucci classification). The distance between MB1 and MB2 orifices and the palatal orifice were recorded, as well as the distance between the orifices and the line joining the palatal orifice and the others. A statistical analysis was performed by providing descriptive measures, the measure of the correlation between different parameters, and the influence of some of these measures on the presence of a confluence between MB1 and MB2.

Results

It resulted that the most frequent configuration is type II Vertucci. The length measured on the sagittal plane was significantly correlated to the presence of a confluence in the MB root. When the root length was higher than 14.56 mm, the confluence is three times more frequent than when the length is lower (OR = 3.635). The area under the curve (AUC) of the receiver operator characteristic (ROC) curve for length on the sagittal plane was 0.632 (P=0.036).

Conclusions

The presence of a confluence between the MB canals of maxillary molars is correlated to the length of the root that could be measured on the sagittal plane and to the distance between the canal orifices. The relative position of the root canal orifices in relation to anatomic landmarks needs to be further explored.

Endodontic Treatment of a Maxillary First Molar With Two Separate Palatal Roots: A Case Report

Maxillary first molars exhibit considerable anatomical variation, with a single palatal root being the most common occurrence, while two palatal roots are notably less frequent. This case report details the endodontic treatment of a maxillary first molar with two separate palatal roots. It highlights the critical importance of recognizing these anatomical variations and their unique challenges during endodontic procedures. This report emphasizes the essential role of advanced diagnostic methods, such as cone-beam computed tomography, and the use of microscopic techniques in identifying and treating such cases.

A New Methodology to Determine the Orifice for Root Canal Configurations in First Permanent Molar Root and Canal Morphologies Using Micro-Computed Tomography

BACKGROUND

The distinction between where the pulp chamber ends and the root canal system begins is poorly defined within the existing literature.

METHODS

This paper aimed to describe a range of accurate methods to define the transition from pulp chamber to root canal in different first molar root morphologies using micro-focus computed tomography (micro-CT).

METHODS

The sample consisted of 86 mandibular and 101 maxillary first molars from the skeletal collections housed in the Department of Anatomy and Histology of the Sefako Makgatho Health Sciences University and the Pretoria Bone Collection. A stepwise approach using the cemento-enamel junction (CEJ) and dedicated landmarks was followed to create an automated cross-sectional slice.

RESULTS

Transition from pulp chamber to root canal could be accurately determined on maxillary and mandibular teeth. The occurrence of two separate roots in mandibular molars was 97.7%, with the remaining 2.3% having an additional disto-lingual root, with no mandibular molars displaying fused roots. In the maxillary molars, 92.1% had three separate roots and 7.9% displayed root fusion. Within this group, one tooth displayed a C-shaped root canal configuration and one a mesotaurodont-type morphology.

CONCLUSION

The suggested methodology to determine orifice location was found to be appropriate in all morphological types.

Effectiveness of a new endodontic irrigation system for removing smear layer and dissolving simulated organic matter

OBJECTIVES

The study aimed to evaluate the potential for the dissolution of organic tissue in areas of simulated complexity and cleaning of root canal walls of the new iVac® endodontic irrigation system.

MATERIAL AND METHODS

Thirty mandibular premolars were evaluated by scanning electron microscopy before and after biomechanical preparation. Then, they were distributed according to the final irrigation protocol into groups with conventional irrigation, ultrasonic agitation with metallic insert (UA), and iVac® system, and new photomicrographs were obtained. For tissue dissolution analysis, glass capillaries filled with catgut were attached to the cervical and apical thirds of twenty-one prototyped upper incisors. They were weighed before and after the previously mentioned irrigation protocols. The data were statistically compared with a significance level of 5%.

RESULTS

The final irrigation provided greater cleaning of the root canal walls in the cervical, middle, and apical thirds of the root canals (P < 0.05), with no statistically significant difference between UA and iVac®, regardless of the analyzed thirds. Both ultrasonic irrigation protocols dissolved a significantly greater volume than the conventional irrigation protocol (P < 0.05), with no difference between the two protocols (P < 0.05).

CONCLUSIONS

The iVac® system showed root canal wall cleaning and tissue dissolution similar to UA with a metallic insert, and both were superior to conventional irrigation.

CLINICAL RELEVANCE

The new irrigation system iVac is more effective than conventional irrigation and has similar root canal wall cleaning and tissue dissolution to UA.

Morphometric relationships in mesio-buccal roots of maxillary first molars in Saudi subpopulation: A CBCT study

This CBCT-based study analysed morphometric relationships in Mesio-Buccal (MB) roots of maxillary first molars (MFM). 133 MFM with two MB canals were assessed and classified using Vertucci's classification. MB roots' length and MB1-MB2 canals inter-orifice distances (IOD) were noted. The data were analysed using SPSS software. The most frequently present canal was type IV (59.4%) followed by type II (40.6%). Mean MB roots' length for canals exhibiting type IV was 9.26 ± 0.21 mm and of those exhibiting type II was 12.8 ± 0.42 mm. Statistically significant relationship was found between MB root length and canal type. Mean IOD for type II and type IV canals was 2.4 ± 0.47 and 3.8 ± 0.21 mm, respectively. Statistically significant relationship was found between IOD and canal type. Length of MB root and IOD had a significant association with canal type present in MFM. This knowledge can enhance clinicians' understanding of canal morphology which can increase predictability and success rate of endodontic treatment.

Effect of the progressive taper enlargement of buccal root canals of three-rooted maxillary molars: A stepwise micro-CT study

This study evaluated unprepared canal areas, volume of dentine removal, and dentine thickness after the progressive enlargement of the buccal canals of 22 maxillary molars, with and without the MB2, using instruments with the same tip size (0.25 mm) but 4 different tapers (0.03, 0.05, 0.06 and 0.08 v). Micro-CT scans were performed after each instrument. Data were compared using a general linear mixed model post hoc comparisons with Kenward-Roger for Wald F tests (α = 5%). After each treatment step, it was observed an increase in the percentage volume of removed dentine and a decrease in the unprepared areas and dentine thickness at the pericervical region of all canals (p < 0.05). The percentage reduction of dentine thickness in MB2 canal was higher than in the mesiobuccal and distobuccal canals (p < 0.05). Knowledge of pre-operative dimensions and dentine thickness before enlargement of buccal canals of maxillary molars is an important factor to avoid excessive dentine removal.

Internal adaptation and mechanical properties of CAD/CAM glass fiber post-cores in molars: An in vitro study

OBJECTIVE

The purpose of this in vitro study was to evaluate the internal adaptation, fracture resistance, and fracture pattern of the residual roots and crowns of molars restored with computer-aided design/computer-aided manufacturing (CAD/CAM) glass fiber post-cores, and compare them with three other post-core restorations.

MATERIALS AND METHODS

We selected 32 extracted maxillary first molars and divided them into four groups according to the post-core system: traditional casting titanium (Ti) post-cores (TC group); Ti post-cores fabricated with selective laser melting (SLM group); CAD/CAM glass fiber post-cores of the split type (CCS group); and prefabricated glass fiber posts and composite resin cores (PF group). The internal adaptation was analyzed with microcomputed tomography. Teeth were restored with monolithic zirconia crowns and subjected to thermocycling and cyclic loading. A load was applied consistently along the long axis of the tooth until fracture to record the fracture resistance and pattern. For the statistical analysis, one- and two-way analyses of variance, Tukey's post hoc and chi-square tests were performed to compare the differences among the groups.

RESULTS

The CCS, TC, and SLM groups exhibited similar internal adaptations across all sections (P < 0.05). The FP group showed good fit with the root canals in the apical and middle sections but a poor fit with those in the cervical section. The fracture resistance was higher in the CCS, TC, and SLM groups compared to the PF group (P < 0.05). The proportions of restorable fractures in the CCS and PF groups were 62.5% and 50%, respectively. Unrestorable fractures were more frequent in the TC and SLM groups at frequencies of 100% and 87.5%, respectively.

CONCLUSION

The internal adaptation and fracture resistance of the CCS group were similar to those of the TC and SLM groups, and the fracture pattern was mostly restorable, thus meeting the clinical requirements for molar post-core restorations.

CLINICAL SIGNIFICANCE

CCS can be used to restore residual roots and crowns of molars and exhibit high efficacy in terms of adaptability and mechanical properties. More studies are required to evaluate the effectiveness of CCS.

Biocompatibility of three different root canal sealers, experimental study

OBJECTIVES

This study was assessed the biocompatibility of three different root canal sealers (Well-Root St, GuttaFlow Bioseal, and AH-Plus) following implantation in rat subcutaneous tissues, using histopathological immunohistochemical analysis.

METHODS

Four groups of eighty-four male rats each underwent subcutaneous dorsal implantation of a polyethylene tube, either empty or filled. Tissues were collected, fixed, and processed for histological analysis after 7, 15, and 30 d. Slides were photographed and digitally processed to identify lymphocytes and macrophages using Cluster of differentiation 3 (CD3) and cluster of differentiation 68 (CD68) markers, respectively. P was set at 0.05, when lymphocyte and macrophage infiltration was compared between groups and observation times using one-way analysis of variance (ANOVA).

RESULTS

Histopathological analysis of all groups revealed an inflammatory reaction followed by the emergence of a fibrous capsule after 7 days. After 30 days, the thickness of the fibrous capsule and the inflammatory response subsided. CD3 staining for immunohistochemical analysis revealed that the AH-Plus group had the highest mean percentage of lymphocyte infiltration at 7 and 15 days, followed by the Well-Root St, GuttaFlow Bioseal, and Control groups. After 30 days, no discernible difference was observed between the groups in terms of the mean percentage of lymphocyte infiltration. After 7, 15, and 30 days, there was a significant difference in the mean percentage of macrophage infiltration across the groups, as demonstrated by CD68 staining. After 7, 15, and 30 days, the AH-Plus group had the highest mean percentage of macrophage infiltration, followed by the Well-Root St. and GuttaFlow Bioseal groups, while the control group had the lowest mean percentage.

CONCLUSION

All observational periods showed minimal inflammatory reactions to GuttaFlow Bioseal. After subcutaneous tissue implantation in a rat model, the initial inflammatory reactions to Well-Root St and AH-Plus had abated by day 30, and all tested sealers had outstanding biocompatibility.

A Cone-Beam Computed Tomographic Analysis of Mesiobuccal Root Canals of Maxillary First Molars

INTRODUCTION

The maxillary first molar is crucial for proper bite formation and jaw positioning in adulthood. The prevalence of dental caries in the study's sample population suggests it is a common candidate for endodontic therapy. Multiple studies have shown that the canal and root morphology of the maxillary first molar are abnormal.

MATERIALS AND METHODS

The distobuccal and palatal roots of 286 maxillary first molars were removed at the furcation. The mesiobuccal roots were then imaged using cone-beam computed tomography (CBCT) on all specimens. The specimens were analyzed in comparison with one another. The following factors were studied. The number and arrangement of canals, as described by Vertucci; the presence or absence of an isthmus, as described by Kim; the canal curvature angle, as measured by the Schneider method; characteristics such as calcified segments, lateral canals, and an apical delta. For the flow analysis, CBCT was utilized to examine the root channel architecture of 286 mesiobuccal (MB) permanent maxillary first molar.

RESULTS

Type I canal arrangement was found in 51.6% of teeth, Type II in 33.3%, Type III in 4.6%, Type IV in 4.2%, Type V in 2.5%, and Type VII in 1.5%. Type I, II, III, and V isthmus were each present in 26%, 6.7%, 9.5%, and 10.2% of the samples, respectively. Teeth with MB1 canal angulations of 0-20 degrees, 21-40 degrees, and more than 40 degrees were found in 56, 188, and 41 teeth, respectively. From 0 to 20 degrees, 21 to 40 degrees, and more than 40 degrees, 15 teeth, 88 teeth, and 25 teeth, respectively, had angulations in their MB2 canals. Only 9.8% of the samples had lateral canals, while 16.1% had both accessory canals and apical deltas. There were 19 cases with calcified segments in the coronal third of the MB1 canal and 13 cases in the middle third. There were no calcifications at the distal end of the MB1 canal. Thirteen of the specimens showed calcification only in the most caudal third of the MB2 canal, whereas the middle and distal thirds were uncalcified.

CONCLUSION

Utilizing a noninvasive approach, a CBCT scan has the capacity to provide valuable insights into the root canal configuration.

Root Canal Morphology of Premolars in Saudis

AIM

This study aimed to evaluate root number and morphological variations of the root canal system in maxillary and mandibular premolars among the Saudi subpopulation.

METHODOLOGY

A total of 500 cone-beam computed tomography (CBCT) images were assessed, including 2442 maxillary and mandibular premolars. The evaluation encompassed the number of roots and canals and their configuration based on the Vertucci classification. Gender differences were considered, along with the position of premolars and unilateral or bilateral symmetry.

RESULTS

Maxillary first premolars predominantly exhibited two roots (82.6%), followed by one root (16.3%) and three roots (0.97%), with a majority having two root canals (83.6%). Regarding maxillary second premolars, the most common morphology was one root (66.6%), with two root canals (40.5%) observed more frequently than one root canal (38.1%). Mandibular first and second premolars mainly featured one root (84.8% and 96.1%, respectively) with one root canal (70.8% and 90.2%, respectively), whereas two root canals were less prevalent (2.3% and 1.8%, respectively). Three canals and three roots were rarely found in mandibular premolars (0.3%). Regarding maxillary premolars, males exhibited significantly higher type IV and mandibular type I root configurations compared with females. Conversely, regarding mandibular premolars, females showed significant mandibular type V and higher type I root configurations compared with males.

CONCLUSION

CBCT imaging facilitated precise assessment of root morphology and root canal configurations in maxillary and mandibular premolars. The present findings can aid dentists in diagnosing, evaluating case difficulty, and devising effective root canal treatments, particularly in patients from Saudi Arabia.

Unveiling Hidden Canals: Middle Mesial Canal Prevalence in Mandibular First Molars Using Cone-Beam Computed Tomography Analysis in Central India

Background The most frequent reason involving failure of root canal treatment in molar teeth is the inability to locate additional canals. While much research has been conducted on the morphology of mandibular molars, little is known about isthmuses and middle mesial (MM) canals in the Indian population. The primary aim of the present research was to determine the prevalence of MM canals and isthmuses of mandibular first molars in the Central India population using cone-beam computed tomography (CBCT) images. Methodology CBCT of 140 mandibular first molar teeth was analyzed from the institutional database images in the coronal, sagittal, and axial planes. Data concerning the number of root canals, the presence of middle mesial canals, and the presence of isthmus were noted. Information collected was transferred into an Excel sheet and analyzed using the Statistical Package for Social Sciences (IBM Corp., Armonk, NY, USA). Results Eight images (5.71%) revealed the presence of middle mesial canals with no statistically significant occurrence. The incidence of isthmi in the mandibular first molar was 84.3%, and the presence of isthmi in the coronal third was about 38.6%. This showed a considerable presence. Conclusion There is incidence of the middle mesial canal, which emphasizes the need to locate extra canals in patients undergoing root canal endodontic treatment. The implementation of CBCT will help identify the extra canal before the treatment. This will help ultimately in providing better patient care.

Ageing-related effects of dye penetration in the apical 5 mm mesiobuccal and mesial roots of molars

This study examined how the tubular permeability in the apical 5 mm of mesial roots was affected by age, direction, distance from root apex, canal shape and canal number. Twenty mesiobuccal/mesial roots of maxillary/mandibular molars from three age groups (<30, 30-60, >60 years) were prepared. Maximal dye penetration in buccal, lingual, mesial and distal directions was measured at 1-mm segment depth and analysed statistically. The <30 years group, when comparing to the >60 years group, had significantly deeper dye penetration in buccal and lingual directions. The permeability in proximal directions was not affected by either age or canal number. In the >60 years group, neither direction, segment depth nor canal number significantly impacted the permeability. However, these parameters significantly impacted samples younger than 60 years. Effective removal of infected root canal dentine would depend on age and its related preferred direction, distance from root apex and canal number.

To Analyze the Mesiobuccal Root Canal of Maxillary First Molar using Cone Beam Computed Tomography: An Ex-vivo Study

Aim and Objectives

The purpose of this study was to use cone bar CT to investigate the root trench morphology of two-hundred mesiobuccal permanent first molars in the maxilla.

Materials and Methods

The distobuccal and palatal roots were removed at the furcation in 250 maxillary first molars. The mesiobuccal roots were then imaged using cone beam computed tomography on all specimens. The specimens were analyzed and compared to one another." This study looked into the following factors. How Many Canals There Are and What Shape Those Canals Take Errors such as lateral canals, apical delta, calcified segments, and others.

Result

Vertucci's trench configuration, kinds I, II, III, IV, V, and VII, were seen in 30%, 20%, 5%, 6%, 7%, and 2.5% of the teeth, respectively. Calcified sections were found in the coronal third of the MB1 trench for eight of the samples, and in the central third for two of the samples. The MB1 trench did not have any calcifications at its very end. The coronal 33 percent of the MB2 trench was calcified in eight samples, but no calcifications were seen in the middle or upper thirds.

Conclusion

Noninvasively and with little radiation, a cone beam CT scan can help you learn about your root canal setup.

Cone-Beam Computed Tomography (CBCT) Analysis of an Unusual Configuration of the Upper First Molar With a C-shaped Canal With Apically Fused Roots: A Case Report

Lack of identification of the root canal results in root canal treatment failure, one of the most frequent causes of root canal treatment failure. To successfully treat root canals, it is crucial to have a detailed understanding of root canal configuration, including distinguishing traits and anatomical differences. The root canal in the C form arrangement is among the most important anatomical variances. Because of its distinctive highlight, the existence of fins or webs linking the different root canals - the C-shaped form of root canal has proven challenging to detect and manage. Any molar region may have this root canal arrangement, including the mandibular first molar, first premolar, and maxillary molars. Above all, mandibular second molars are where it is most usually discovered. This report discusses the uncommon maxillary first molar with an apically merged root. The importance of comprehending canal variations, which are C-shaped root canals, should be critically evaluated in light of the rise in the root canal treatment failure rate for the upper molars.

The morphology of permanent maxillary first molars evaluated by cone-beam computed tomography among a Yemeni population

BACKGROUND

The study's objective was to use CBCT to ascertain the root and root canal anatomy of the permanent maxillary first molars in a Yemeni population. It was considered how gender affected the prevalence of root canal morphology.

METHODS

A sample of 373 CBCT records of maxillary permanent first molars belonging to 373 Yemeni individuals (162 males and 211 females) aged between 12 and 65 years were included in this study. Using CBCT on the teeth, the root form and canal morphology for each root based on Vertucci's classification were evaluated. The distribution of MB2 occurrence was documented. The prevalence and resemblance of the men and females were investigated. The Chi-square test was performed to evaluate the findings.

RESULTS

Of the 373 maxillary first molars studied, the three separated root form was found in 94.9% of the studied MFMs while the two fused and one separate root form was found in 4.5%. The majority of the three-rooted MFMs (82.6%) had more than three root canals (four canals in 77.2% and five canals in 5.4%). The prevalence of MB2 was as high as 82.3% of the three-rooted MFMs. Vertucci type II configuration was the most frequent canal type (25%) followed by Vertucci type III (23.1%) and Vertucci type I (17.7%) in the mesiobuccal root. Vertucci type I was the most prevalent canal configuration in the distobuccal root and palatal root of the three-rooted MFMs (96% and 99.5%, respectively).

CONCLUSIONS

The maxillary first molars' root canal morphology indicated notable variations among a Yemeni population. The maxillary first molars of most of the Yemeni participants in this study had three roots and four canals. In light of the high occurrence of MB2 (82.3%) in permanent maxillary first molars, our findings emphasize the need of searching for and using cutting-edge techniques to locate the MB2 canals. Males outnumbered females in proportion.

Prevalence of mesiobuccal-2 canals in maxillary first and second molars among the Bruneian population—CBCT analysis

Introduction

Identification of the second mesiobuccal canal (MB-2) in maxillary molars is considered an endodontic concern of many practitioners due to its complex morphology. The use of Cone-beam Computed Tomography (CBCT) is a necessity for easier location of this elusive canal during endodontic treatment.

Aim

To study the prevalence of the MB-2 canal in the maxillary first and second molars amongst the Bruneian population.

Materials and methods

A retrospective study involving a review of scans taken from a CBCT scanner (J Morita; Veraviewepocs 3D R100 Panoramic/Cephalometric) over a 5-year period, from May 2016 to May 2021 was carried out. A total of 342 maxillary molars were evaluated independently by two observers. Any contradicting outcomes were discussed by both observers until a consensus was reached. In addition, the correlation of MB-2 canals with gender and age were calculated using the chi-squared test.

Results

The prevalence of MB-2 canal in the maxillary first and second molars are 51.3% and 29.8% respectively. Both males and females have a similar prevalence of MB-2 canals in the maxillary first and second molars. The incidence of MB-2 canals in both maxillary first and second molars significantly decreases with increasing age. No significant correlation between the prevalence of MB-2 canals with different gender groups in the population.

Conclusions

It is crucial for clinicians to identify the presence of MB-2 canals when performing endodontic treatment of the maxillary first and second molars. Varying prevalence has been reported for different populations. Recognising this wide-ranging prevalence amongst different populations will allow for greater predictability in ensuring endodontic treatment success.

Evaluation of Variations in Root Canal Anatomy and Morphology of Permanent Maxillary Premolars among the Emirate Population using CBCT

Background:

Many types of research have revealed that root canal anatomy differs by race and country based on various national populations, but no study has been conducted on the UAE population.

Objectives:

Identifying the most common morphology of the upper premolars in a group of local and non-local people in the UAE.

Methods:

Cone-beam computed tomography (CBCT) images of 215 intact maxillary premolars were analyzed. The Pearson Chi-squared test and the two samples t-test were applied.

Results:

Most of the maxillary first premolars were two-root formed (90%). Single-rooted teeth were less common (8%). Three-rooted maxillary first premolars represented a low frequency of 1.9%. Most of the maxillary second premolar teeth studied in this research (52%) had two roots. Almost all local and non-local populations had two canals for both first and second maxillary premolar. Only two maxillary first premolars (0.2%) had the three-canal morphology. The most frequent canal morphology in the maxillary first premolar group among local UAE and non-local was type V. The maxillary second premolar group among local UAE was type II (32%). In non-local UAE, type V (25%). In addition, six types of uncommon canal anatomic variants (types 1-2-3, 2-3-2, 3-2-1, 1-2-3-2, 2-1-2-1, and 3-2) were discovered in 3.7% of local UAE and 36.3% of non-local UAE.

Conclusion:

The results suggest a more quantitative approach to maxillary first and second premolar access cavity preparation in the UAE population to prevent errors and iatrogenic damage when identifying the canals.

Location angle of second mesio-buccal canal in maxillary molars of an Indian population: an in vivo retrospective CBCT evaluation and proposal of a new classification

Background

The current investigation was designed for predicting the location angle of second mesio-buccal root canal in permanent maxillary (first and second) molars with the aid of proposed measuring points and line using cone beam computed tomography in an Indian population.

Methods

Three-hundred and twenty-four scans of permanent maxillary (first (n = 162) and second (n = 162)) molars with mesio-buccal 2 root canals and unassociated to the current evaluation were acquired. The maxillary molars were viewed with CSI imaging software. The images were captured and were further assessed using 3D Slicer. The assessment included of measuring the distance between the main mesio-buccal and mesio-buccal 2 canal and the angle at which the MB2 it is located utilizing proposed lines joining the disto-buccal and palatal canals. The data was tabulated for the incidence of various angles where the MB2 is located and MB-MB2 distance was determined. The angles denoted were either positive; I (0.1° to 1.9°), II (2° to 4°), III (>4°) or negative I (-0.1° to -1.9°), II (-2° to -4°), III (>-4°). On the data tabulated a new Banga Vhorkate and Pawar's (BVP's) angular classification for maxillary molars was proposed.

Results

The existence of positive angle III was found in 41.35% of maxillary first molars (36 right and 31 left of 162), whereas positive angle II appeared in 41.98% of maxillary second molars (32 right and 36 left of 162). The MB1-MB2 in maxillary 1^st molar is seen to be 3.12-3.31 mm and this distance in maxillary 2^nd molar is 2.8-3.1 mm. The disto-buccal to palatal canal orifice mean distance was 5.06-5.22 mm in maxillary first molars and 4.9-5.8 mm in maxillary second molars.

Conclusion

Accurate diagnosis of the location of second mesio-buccal canal increases the success rate of endodontic treatment and a better prognosis. The new proposed classification may be considerably helpful in the urge to locate the mesio-buccal 2 canal.

In Vitro Diagnostic Accuracy and Agreement of Dental Microscope and Cone-Beam Computed Tomography in Comparison with Microcomputed Tomography for Detection of the Second Mesiobuccal Canal of Maxillary First Molars

OBJECTIVES

The percentage of failure of endodontically treated maxillary molars is relatively high; one main reason is that the second mesiobuccal canal (MB2) is missing. Some techniques have been proposed for detection of the MB2. This study was aimed at assessing the diagnostic accuracy and agreement of the dental microscope and cone-beam computed tomography (CBCT) in comparison with microcomputed tomography (micro-CT) for detection of the MB2 of maxillary first molars in vitro.

MATERIALS AND METHODS

This in vitro, experimental study evaluated 71 permanent maxillary first molars that were stored in 100% humidity at room temperature. The teeth were mounted in 9 silicone dental arches to the level of their cementoenamel junction (8 teeth in each arch). The blocks underwent CBCT in a XG3D scanner. Access cavity was then prepared, and the teeth were inspected by a surgical microscope for negotiation of the MB2. Also, micro-CT images were obtained from the teeth to serve as the gold standard. CBCT and micro-CT images were observed by two examiners twice with a 2-week interval.

RESULTS

The frequency of the MB2 detected by dental microscope was significantly lower than micro-CT (P < 0.001) and CBCT (P = 0.008); no significant difference existed between micro-CT and CBCT in this respect. The sensitivity, specificity, positive predictive value, and negative predictive value of CBCT for detection of MB2 were 92.6%, 100%, 100%, and 81%, respectively.

CONCLUSION

CBCT is superior to the dental microscope for detection of the MB2 of maxillary first molars and can be used for this purpose in the clinical setting with adequate accuracy.

3D-Printed Teeth in Endodontics: Why, How, Problems and Future-A Narrative Review

Three-dimensional printing offers possibilities for the development of new models in endodontics. Numerous studies have used 3D-printed teeth; however, protocols for the standardization of studies still need to be developed. Another problem with 3D-printed teeth is the different areas of literature requested to understand the processes. This review aims to gather evidence about 3D-printed teeth on the following aspects: (1) why they are advantageous; (2) how they are manufactured; (3) problems they present; and (4) future research topics. Natural teeth are still the standard practice in ex vivo studies and pre-clinical courses, but they have several drawbacks. Printed teeth may overcome all limitations of natural teeth. Printing technology relies on 3D data and post-processing tools to form a 3D model, ultimately generating a prototype using 3D printers. The major concerns with 3D-printed teeth are the resin hardness and printing accuracy of the canal anatomy. Guidance is presented for future studies to solve the problems of 3D-printed teeth and develop well-established protocols, for the standardization of methods to be achieved. In the future, 3D-printed teeth have the possibility to become the gold standard in ex vivo studies and endodontic training.

Validity of the dental operating microscope and selective dentin removal with ultrasonic tips for locating the second mesiobuccal canal (MB2) in maxillary first molars: An in vivo study

Background

Several investigations have determined whether the use of a dental operating microscope (DOM) in combination with selective dentine removal with ultrasonic tips increases the percentage of location of the Mesiobuccal 2 (MB2) root canal in maxillary first molars (MFM). However, these studies did not report the performance of in vivo measurements with the comparison with a gold standard. The aim of this study was to determine the validity of the DOM and selective dentin removal with ultrasonic tips to locate the MB2 root canal in MFM using Cone Beam Computed Tomography (CBCT) as the gold standard.

Material and Methods

The initial sample size was 91 patients, but 7 were excluded, so the sample size was 84 patients who signed the informed consent. Inclusion criteria: MFM indicated for root canal treatment. An expert blinded observer identified the MB2 in the CBCT. Two standardized examiners (Kappa=91%) performed the clinical assessment in three stages: Stage 1, canal location with an endodontic explorer and a mirror; Stage 2, use of DOM and Stage 3, use of DOM plus selective dentine removal with ultrasonic tips. The validity of each stage was calculated.

Results

The prevalence of MB2 using CBCT was 79%, by clinical location was 68%. Sensitivity was 79%, 82%, 86% for stage 1, 2 and 3, respectively. Specificity and Positive Predictive Values were 100% for all methods. Negative Predictive Value was 56%, 60%, 67%, respectively. Positive Likelihood Ratio tends to infinity for all methods, Negative Likelihood Ratio= 0.21, 0.18 and 0.14 and Accuracy= 83%, 86% and 89%, respectively.

Conclusions

The use of DOM with selective dentine removal with ultrasonic tips is the most valid method for locating MB2 canal in MFM. There was an increase in the location of the MB2 root canal with the DOM and ultrasonic tips, which definitely help the clinician. Key words:Cone beam computed tomography, microscopy, second mesiobuccal canal, sensitivity and specificity, validity.

The Prevalence and Location of the Second Mesiobuccal Canals in Maxillary First and Second Molars Assessed by Cone-Beam Computed Tomography

Objective

This retrospective study aimed to investigate the prevalence and location of the second mesiobuccal (MB2) canal in the mesiobuccal root of the maxillary first molar (MFM) and the maxillary second molar (MSM) through cone-beam computed tomography (CBCT) imaging.

Methods

One thousand two hundred CBCT images of the MFM and MSM were divided equally and analyzed. To standardize the methodology of MB2 detection, the observation and measurements were located at the pulpal floor by 1 mm apically. The distances between canals were calculated from the center point of the MB2 canal (PMB2) to the center point of both the first mesiobuccal canal (PMB1) and the palatal canal (PP). The data were provided in the form of frequencies and percentages. The chi-square test was used to analyze the differences among maxillary molars, while the significance level was set at 0.05.

Results

The prevalence of the MB2 canal in the MFM and MSM was 46.7% (p=0.020) and 17.7% (p=0.457), respectively. Additionally, the prevalence of the MB2 canal was more frequent in females. The average distance between PMB1 and PMB2 for MFM and MSM was 1.87±0.42 mm and 1.24±0.76 mm, respectively. Furthermore, the average distances of PMB2 and PP were 0.74±0.21 mm and 0.43±0.18 mm for MFM and MSM, respectively.

Conclusion

The MB2 canal was found in 386 (32.2%) of the maxillary molars. The Saudi people have a high possibility of discovering the MB2 canal. The CBCT is a useful and high-precision diagnostic tool not only for detecting but also for locating in vivo MB2 canal in the mesiobuccal root of maxillary molars.

Visual inspection of root patterns and radiographic estimation of its canal configurations by confirmation using sectioning method. An ex vivo study on maxillary first premolar teeth

Background

A thorough understanding of the original root and canal anatomy is a critical technical prerequisite for performing cleaning and shaping treatments. Therefore, this research aimed to characterize maxillary first premolar teeth' root morphology and canal architecture.

Methods

One hundred forty-two extracted human adult maxillary first premolar teeth have been retrieved. The extracted teeth were thoroughly cleaned and irrigated to eliminate any remaining debris or blood. They were then preserved in formalin solution until they were eligible for screening. To begin, a visual examination was employed to ascertain the number of roots and their geometry in each sample. Then, utilizing digital radiography in two plains, mesiodistal and distomesial, to further determine those parameters. Finally, a sectioning technique had been used to have the samples cut mesiodistally into slices to validate the internal root canal architecture and identify the number of root canals and their varieties in accordance with Vertucci's categorization system. The canal layout, the pulp chamber, and the root canals were all highlighted (marked) using a fine tip marker in a permanent orange hue to make the canal features more accessible and accurate to visualize. All of the processes were conducted by two highly qualified dentists. The sample size was estimated statistically using the Sealed Envelope program, and the percentage of each configuration was derived in proportion to the overall sample size in order to establish the percentage of each type in each configuration.

Results

From the 142 teeth examined, 42 (29.57%) had one root, 97 (68.31%) had two roots, and only three premolars (2.12%) had three roots. Concerning canal configurations, 100 teeth (70.43%) had type (IV) canal configuration, followed by 37 teeth (26.05%) had types (V), three teeth (2.12%) had type (VIII), and one tooth (0.70%) for each of type (I) and type (II).

Conclusions

The anatomical pattern of inspected maxillary first premolars are mainly two rooted and predominantly have a type (IV) canal morphology.

Morphotypes of the apical constriction of maxillary molars: a micro-computed tomographic evaluation

Objectives

The aim of this study was to evaluate and compare the apical constriction (AC) and apical canal morphology of maxillary first and second molars, using micro-computed tomography (micro-CT).

Materials and Methods

The anatomical features of 313 root canals from 41 maxillary first molars and 57 maxillary second molars of patients with known age and sex were evaluated using micro-CT, with a resolution of 26.7 µm. The factors evaluated were the presence or absence of AC, the morphotypes, bucco-lingual dimension, mesio-distal dimension, and the profile (shape) of AC and the apical root canal. The apical root canal dimensions, location of the apical foramen (AF), AC to AF distance, and presence of accessory canals in the apical 5 mm were also assessed. Descriptive and analytical statistics were used for data evaluation.

Results

AC was present in all 313 root canals. Patients’ age and sex did not significantly impact either AC or the apical canal dimensions. The most common AC morphotype detected was the traditional (single) constriction (52%), followed by the parallel (29%) morphotype. The mean AC dimensions in maxillary first molars were not significantly different from those in maxillary second molars. Sixty percent of AF were located within 0.5 mm from the anatomic apex.

Conclusions

The most common morphotype of AC detected was the traditional constriction. Neither patients’ age nor sex had a significant impact on the dimensions of the AC or the apical root canal. The majority of AF (60%) were located within 0.5 mm from the anatomic apex.

Robotic and Microrobotic Tools for Dental Therapy

Robotic and microrobotic tools such as dental operating microscopes and dental endoscopes are being used extensively in dental therapy, which have a significant impact on dental therapy and education. Herein, this paper reviews the state of the art of robotic and microrobotic tools for dental therapy. This article starts with a brief introduction of current robotic and microrobotic tools for dental therapy and then displays their applications in various dental problems; strengths and weaknesses are also surveyed. Lastly, the conclusion and outlook are discussed, referring to the emerging dental clinic problems and demands. This review is expected to provide guidelines for the therapeutic application of robotic and microrobotic tools and to promote the development of robots in dentistry.

Anatomical Evaluation of Root and Root Canal Configuration of Permanent Maxillary Dentition in the Population of the Kingdom of Saudi Arabia

AIM

This study is aimed at combining the sample sizes of all studies on permanent maxillary teeth conducted in different regions of the Kingdom of Saudi Arabia (KSA) to obtain a large sample size that represents the population of the KSA. The outcome of these combined studies is compared with international studies in terms of the number of roots, number of canals, and canal configurations on the basis of Vertucci's classification. Methodology. The studies were systematically reviewed using the Preferred Reporting Items for Systematic Review and Meta-analysis chart. Studies were included in the analysis if they were conducted in the KSA, involved permanent human maxillary teeth, and had a sample of more than 10 teeth (power). By contrast, studies were excluded if they involved deciduous teeth in the sample size, investigated nonhuman teeth, were not conducted in the KSA, and were case reports, case series, review studies, and anomalies. Relevant literature was searched from PubMed, Scopus, Web of Science, Embase, Cochrane, and Direct Science by two calibrated teams, starting in August 2020, without time limits or language restrictions.

RESULTS

The database searches and cross-referencing identified a total of 19 relevant studies. All maxillary canines (N = 1,018) had one root, whereas 98.4% had one canal and 98.3% had Vertucci type I. Moreover, 63.2% of the maxillary first premolars had two roots, and 91.4% had two canals. The most common Vertucci root canal configuration was type IV (64.6%). The maxillary second premolars mostly had one root (84.4%) and one canal (50.4%). The most common canal configuration was Vertucci type I (47.1%). The majority of maxillary first molars had three roots (98.9%), 48.7% of which had three canals, and 46.4% had four canals. The most prevalent feature of the canal morphology of mesiobuccal roots was Vertucci type II (35.3%). The investigated maxillary second molars had three roots, 88.0% of which had three canals.

CONCLUSION

This systematic review represents the Saudi population since samples were combined from different studies from different regions of the country. Variations in findings were observed in the same group of teeth from different regions and the same region, while the overall combined samples results fell within the range of other international studies.

Root Canal Configuration of Burmese (Myanmar) Maxillary First Molar: A Micro-Computed Tomography Study

Aim

To investigate the root canal anatomy of Burmese (Myanmar) permanent maxillary first molar (BMFM) with micro-computed tomography. Methodology. One hundred and one extracted BMFMs were scanned by a SkyScan 1272 scanner (Bruker microCT, Belgium) and reconstructed with NRecon software (Bruker microCT). CTAn software (Bruker microCT) was used to create 3D models of root and internal canal anatomy, while CTVol software (Bruker microCT) was used to visualize 3D models. In each root, Vertucci's canal types, incidence and location of the lateral canal, incidence, location, and type of isthmus, and number and position of foramina were examined.

Results

In 101 specimens, 83 (82.18%) mesiobuccal roots had multiple canals. The most common canal type is type IV (45.5%), followed by type II (17.8%) and I (17.8%) canals. Type III, V, VI, VII, and VIII canals are less than 10% in total. Seven additional canal types were seen for 10% in total. Fourteen (13.86%) distobuccal roots had multiple canals, and the predominant canal type is type I (86.1%), followed by type II (5.9%) and V (4%) canals. Three additional canal types were observed for 4% in total. All palatal roots possessed the simplest type I canal. Apical ramification occurred in 69 mesiobuccal roots (68.3%), 36 distobuccal roots (35.6%), and 37 palatal roots (36.6%). A total of 240 lateral canals were observed in 101 specimens. Each specimen had 2.38 ± 2.22 lateral canals on average. The highest incidence, 136 (56.67%) lateral canals, occurred in the mesiobuccal root, followed by 57 (23.75%) and 47 (19.58%) lateral canals from the distobuccal root and the palatal root, respectively. Each specimen had 6.17 ± 2.42 foramina. Mesiobuccal root had the highest incidence of apical foramina compared to other roots. Seventy-two mesiobuccal roots (71.29%) had isthmus, while only 7 distobuccal roots (6.93%) had isthmus somewhere along the root.

Conclusions

The root canal anatomy of BMFM was quite complex, especially in the mesiobuccal root. The predominant canal type was Vertucci type IV in the mesiobuccal root and type I in the distobuccal and palatal roots. In addition, this micro-computed tomography study disclosed complemented canal types and a higher prevalence of lateral canal than the previous studies.

A novel system for classifying tooth root phenotypes

Human root and canal number and morphology are highly variable, and internal root canal form and count does not necessarily co-vary directly with external morphology. While several typologies and classifications have been developed to address individual components of teeth, there is a need for a comprehensive system, that captures internal and external root features across all teeth. Using CT scans, the external and internal root morphologies of a global sample of humans are analysed (n = 945). From this analysis a method of classification that captures external and internal root morphology in a way that is intuitive, reproducible, and defines the human phenotypic set is developed. Results provide a robust definition of modern human tooth root phenotypic diversity. The method is modular in nature, allowing for incorporation of past and future classification systems. Additionally, it provides a basis for analysing hominin root morphology in evolutionary, ecological, genetic, and developmental contexts.

Assessment of root morphology and canal configuration of maxillary premolars in a Saudi subpopulation: a cone-beam computed tomographic study

BACKGROUND

The objective of this study was to use CBCT to look into the root canal morphology of maxillary premolars in a Saudi Arabian subpopulation and associate the results to existing canal morphology classifications.

METHODS

The sample size for this analysis was 500 right and left untreated maxillary first and second premolars with fully formed roots from 250 Saudi residents (125 male and 125 female). The following observations were made using CBCT on the teeth related: (1) The number and morphology of roots; (2) The canal morphology for each root according to Vertucci's classification. The frequency and similarities between the right and left sides, as well as between females and males, were studied. The Chi-square test was used to assess the results.

RESULTS

Of the 500 maxillary first premolars studied, 199 teeth had one root (39.8%), whilst 293 (58.6%) were two-rooted. Three-rooted maxillary first premolars were found in 8 (1.6%). For maxillary second premolars, 416 premolars had one root (83.2%), whilst 79 (15.8%) had two roots and the rest 5 (1.0%) were three roots. There were significant differences of number of root were found between groups (p > 0.05). For maxillary first premolar, Type IV was the most frequent, accounting for 57.8% of the sample (n = 289), followed by type II (32.8%, n = 164). For maxillary second premolar, Type I was mainly occurrence 302 (60.4%), followed by Type II (16.4%, n = 82).

CONCLUSIONS

The majority of maxillary first premolars had two roots and two root canals, while one root and one root canal was the most common anatomical configuration for maxillary second premolars. Additional canal forms do occur on occasion, and clinicians should pay close attention to them.

Diagnostic Accuracy of CBCT for Detection of Second Canal of Permanent Teeth: A Systematic Review and Meta-Analysis

INTRODUCTION

Missed canal is one of the common reasons for nonsurgical endodontic retreatments. The missed canals were frequently associated with periapical pathology. The aim of this systematic review was to find the diagnostic accuracy of CBCT for detection of the second canal of the root canal system of permanent teeth.

MATERIALS AND METHODS

The articles were selected from seven electronic databases according to selection criteria. All eligible studies were judged by the reviewers. The selected studies were checked with the QUADAS-2 tool for risk of bias and applicability concerns. Finally, 12 studies were selected for qualitative and quantitative analyses. The summary estimates of sensitivities and specificities and SROC curves were calculated and drawn by RevMan 5.3 and MetaDTA software.

RESULTS

Summary estimates of CBCT for detection of second canal anatomy in permanent teeth were 94% sensitivity and 93.1% specificity. 96.6% sensitivity of MB2 was followed by 88.8% sensitivity of maxillary and mandibular premolars and 81% that of mandibular molars. The specificity of 97.6% for premolars was trialed by 85% specificity of mandibular molars and MB2. For permanent mandibular canines, 67% sensitivity and 100% specificity were estimated. CBCT showed more agreement with detecting the second canal with micro-CT, estimating 100% sensitivity and 95.6% specificity. The highest prevalence of the second canal comprised the highest sensitivity of 99.1% and lowest specificity of 77.5%. After the exclusion of case-control studies, a 3% drop of sensitivity from the summary estimate was observed. Multiple spectrum of the second canal had 8.6% higher sensitivity and 4.4% lower specificity than single spectrum.

CONCLUSION

CBCT is informative for detecting the second canal. Clinicians should keep in mind that the accuracy can vary in different types of teeth, with the prevalence of second canal across different populations, and with the spectrum of second canal anatomy in spite of the reviewers having postulated overestimation of the findings.

Evaluation of C-shaped canals in mandibular second molars of a selected patient group using cone beam computed tomography: prevalence, configuration and radicular groove types

The aim of the present study was to examine the prevalence, symmetry and configurations of C-shaped canals and radicular groove types in mandibular second molars according to age and sex in a Turkish sub-population using cone beam computed tomography (CBCT). In total, 674 CBCT images (368 females and 306 males, aged 18-76 years) of 1348 mandibular second molars were evaluated. The symmetry, configuration of C-shaped root canals, radicular groove types with age and sex were noted. One sample chi-square test and chi-square test were used to determine statistically significant differences. The statistical significance level was set at p < 0.05. Of the 1348 mandibular second molars evaluated, 10.7% had C-shaped root canals. C-shaped root canals appeared to be significantly more common in females than in males (p < 0.05). C1 (44.4%) was the most frequent configuration in the coronal third, and C2 (44.4%), and C4 (31.9%) were the most frequent configurations in middle and apical thirds, respectively. Type 2 (45.1%) was the most common radicular groove type (p < 0.05). The frequency of C-shaped root canals in mandibular second molars in a Turkish sub-population was considerably high (10.7%). CBCT can aid the detection of C-shaped canals and their configurations. Dentists should consider the possibility of C-shaped canals in root canal treatment of mandibular second molars, as these configurations have implications for biomechanical preparation and filling methods.

Maxillary First Molars with Two Palatal Root Canals

Understanding the anatomical variations in the roots and root canal systems of a tooth is important for the success of root canal treatment. The palatal roots of the maxillary molars have fewer anatomical variations than the other roots, and fewer variations occur in the first molars than in the second molars. This case report describes two distinct cases of maxillary first molars with two palatal canals. For the root canal treatment of teeth with anatomical variations, it is essential to plan specific treatment strategies using cone-beam computed tomography and to execute them using a dental operating microscope. Knowledge of the anatomical variations in the palatal roots of maxillary first molars will help to increase the success rate of root canal treatments.

Frequency of additional treatments in relation to the number of root filled canals in molar teeth in the Swedish adult population

AIM

To investigate the 5-year frequency of additional treatments in relation to the number of reported root filled canals in molar teeth in Sweden.

METHODOLOGY

The cohort included first and second molars in adult individuals who were registered with a root filling performed in 2009. Treatment codes corresponding to root fillings of teeth with from one up to four root filled canals were identified in the Swedish Social Insurance Agency database. The studied additional treatments were extraction, non-surgical root canal retreatment and endodontic surgery during the subsequent 5 years, identified by corresponding codes for these treatments registered on these specific teeth. Differences in the frequency of additional treatments based on the number of root filled canals were analysed using chi-square test and considered statistically significant at P < 0.05.

RESULTS

In 2009, root fillings on a first or second molar tooth were registered in 100 720 individuals. The study included 32 901 maxillary first molars (6.4% with four root filled canals), 12 763 maxillary second molars (3.3% with four root filled canals), 37 703 mandibular first molars (19.2% with four root filled canals) and 17 353 mandibular second molars (3.7% with four root filled canals). The total frequency of additional treatments was 14.3% (n = 14 425) during the 5-year observational period. Additional treatments were more frequent in teeth with 1-3 root filled canals compared to teeth with four root filled canals for maxillary first molars (15.2% vs. 12.7%, P = 0.002), maxillary second molars (13.8% vs. 9.1%, P = 0.007) and mandibular first molars (14.0% vs. 10.7%, P < 0.001) but not mandibular second molars (15.6% vs. 13.7%, P = 0.200).

CONCLUSIONS

Over 5 years, 85.7% of the included teeth were not registered with any additional treatments. Maxillary first and second molars and mandibular first molar teeth had a greater frequency of additional treatments when ≤3 root canals were filled compared to four canals.

Four-Rooted Maxillary First Molars: A Systematic Review and Meta-Analysis

Objectives

The majority of human maxillary first molars is usually described as having three roots, but different morphologies were documented in several studies and case reports. One very rare and less investigated anatomical anomaly is the occurrence of four radicular structures in the upper first molars. This communication aimed to define the prevalence of four-rooted maxillary first molars on a meta-analytical basis. The external and internal morphology of these teeth was described by the collection of published case reports.

Materials and Methods

Six electronic databases were accessed to collect case reports dealing with four-rooted maxillary first molars, as well as population-based cone-beam computed tomography (CBCT) studies. Afterward, the publications were selected according to predefined inclusion/exclusion criteria and evaluated using the Joanna Briggs Institute Critical Appraisal tool. The teeth of the chosen case reports were then independently analyzed by two dental professionals according to different dental classifications. Furthermore, the population studies were meta-analyzed to calculate the global and regional prevalence of four-rooted maxillary molars.

Results

Included were forty-nine population-based CBCT studies containing 26663 maxillary first molars. Upon these data, the global incidence of four-rooted maxillary molars was meta-analytically determined as 0.047% (95%-CI:0.011-0.103%). In combination with the case reports, it was pointed out that this anomaly is distributed worldwide. Furthermore, forty-eight case reports were included containing fifty-three maxillary molars with four roots. The analyzed teeth exhibited Versiani´s pulpal chamber floor Types A and B. The majority of four-rooted maxillary first molars were classified as Type I regarding Christie's configuration. But, also 7.54% of the altered teeth could not be described by this classification. 62.34% exhibited four root canals, but also variations with five, six, or seven canals were identified. Furthermore, a significant difference was found in the occurrence rate between male and female patients.

Conclusion

Due to the worldwide occurrence, dental professionals should be aware of this rare anomaly to avoid treatment errors, especially during endodontic or surgical therapies.

Association between the Mesiobuccal Canal Configuration, Interorifice Distance, and the Corresponding Root Length of Permanent Maxillary First Molar Tooth: A Cone-beam Computed Tomographic Study

INTRODUCTION

The aim of this cone-beam computed tomographic study was to evaluate the association between the mesiobuccal root canal configuration (RCC), interorifice distance (IOD), and the corresponding root length of a permanent maxillary first molar tooth.

METHODS

One hundred cone-beam computed tomographic scans obtained from the computerized data bank of the institute were studied. The IOD between the first mesiobuccal and second mesiobuccal canal was measured in the axial section where the second mesiobuccal canal was first visualized. The root length was measured from the cementoenamel junction to the root apex in the coronal and sagittal section. The associations of these parameters with the RCC (based on Vertucci's classification) were evaluated.

RESULTS

The predominant RCC was observed to be Vertucci type II (89%). The mean root length with this configuration was 11.19 ± 1.35 mm. In type IV RCC, the mean root length was 9.13 ± 0.52 mm. A statistically significant association was established between the root length and RCC (P < .05). In roots with type II and type IV RCC, the mean IOD was 2.58 ± 0.04 mm and 2.62 ± 0.1 mm, respectively. No statistically significant relation was established between the IOD and the type of RCC (P > .05).

CONCLUSIONS

The length of the mesiobuccal root is an important anatomic parameter for predicting the type of RCC in the permanent maxillary first molar tooth.

Evaluation of root and canal morphology of maxillary permanent first molars in an Emirati population; a cone-beam computed tomography study

Background

The aim of this study was to analyze the root and canal morphology of the maxillary permanent first molars in an Emirati population using cone-beam computed tomography (CBCT).

Methods

Two hundred and sixty-one CBCT scans were acquired. The data were extracted and anonymized to remove all patient identifiers. Two observers (an endodontic resident and an endodontist) evaluated all scans on diagnostic quality monitors.

Results

The prevalence of a second mesiobuccal canal (MB2) was 80.1% in all examined samples. Type II Vertucci classification, was the most common canal configuration (59%) in the mesiobuccal root, followed by Types I (19.9%) and IV (15.3%), while Type III was the least common (5.7%). Types I, II, and IV were significantly more common in the 21–40-year age group (P < 0.001), while Type III was observed significantly more often in the < 20-year age group (P < 0.001). No significant effect of gender on the prevalence of Vertucci classification in the mesiobuccal root of maxillary first molars (P = 0.74) was found. Analysis of bilateral symmetry showed that 80% teeth had perfect bilateral symmetry, whereas 20% were asymmetrical. Type II canal configuration showed the highest prevalence of bilateral symmetry (48.7%), followed by Type I (15%) and Type IV (10%), while Type III showed the least prevalence of symmetry (3%).

Conclusions

This was the first study to analyze the prevalence of MB2 canal in an Emirati population. Our results indicate high prevalence of MB2 (80.1%) and emphasize the importance of using advanced techniques to locate the MB2 canal.

Morphometric Analysis of Furcation Areas of Multirooted Teeth in a Tunisian Population

Aims

The aim of the study was to evaluate the morphological characteristics of furcation of permanent molars in Tunisian population.

Materials and Methods

One hundred and four extracted maxillary and mandibular permanent molars were included in this study; comprising 34 maxillary first molars, 18 maxillary second molars, 33 mandibular first molars, and 19 mandibular second molars. For each tooth, the vertical dimension of the root trunk, root length, and interradicular space width were assessed with a micrometer caliber. Different types of root trunk in maxillary and mandibular molars were also analyzed. Statistical analysis was performed using a t-test.

Results

Root length decreased from the first to the second molars. This decrease seems to be pronounced at mandibular molars. The most observed root trunk type was type B, with a prevalence of 67.30% in maxillary molars and 51.92% in mandibular molars. The root trunk length increased from the first to the second molars in both maxillary and mandibular. The average width of the interradicular spaces varied on the same tooth and between the teeth.

Conclusion

This study provides epidemiological data about molars root length, interradicular space, and root trunk vertical dimension in a Tunisian population that could help clinicians in periodontal and endodontic therapy.

Comparison of Dentinal Wall Thickness in the Furcation Area (Danger Zone) in the First and Second Mesiobuccal Canals in the Maxillary First and Second Molars Using Cone-Beam Computed Tomography

Objective:

Differences in the morphology of the root canal system might result in favorable or adverse treatment outcomes. The present study compared the thickness of the dentinal wall in the danger zone (furcation area) of the first and second mesiobuccal canals in the maxillary first and second molars using cone beam computed tomography.

Methods:

In this cross-sectional study, 50 CBCT images of maxillary first and second molars were evaluated from one of the specialized radiology centers in Kerman, Iran. The images were prepared by a Planmeca Promax 3D Max machine (Planmeca, Helsinki, Finland), with a field of view (FOV) of 8×8 cm and a resolution of 0.1 mm and analyzed with Romexis Viewer software version 3.1.1 (Planmeca, Helsinki, Finland). In the 0.1-mm-thick axial cross-sections with a distance of 1 mm, the distances from the center of the MB1 and MB2 root canals to the furcation area were measured in three areas: A) furcation area, B) 2 mm below the furcation area, and C) 4 mm below the furcation area (at a magnification of ×10). The data were then analyzed with paired t-test.

Results:

The thickness of the dentinal wall in the MB2 root canal was significantly less than that in the MB1 root canal in all the specimens (P<0.05). In both maxillary first and second molars, the thicknesses of the MB1 and MB2 root canals were significantly different in the furcation area and 4 mm below the furcation area (P=0.001). There was no significant difference between the maxillary first and second molars 2 mm below the furcation area; however, the difference was marginal (P=0.07).

Conclusion:

Considering the low thickness of the dentinal wall in the MB2 root canal compared with the MB1 root canal in the maxillary first and second molars, the anti-curvature techniques away from the furcation should be used to prepare this root canal to reduce the risk of strip perforation. On the other hand, it might indicate that highly tapered instruments and other aggressive instruments, such as Gates-Glidden drills, should be used with caution in these root canals.

The frequency of the second mesiobuccal canal in maxillary first molars among a sample of the Kurdistan Region-Iraq population - A retrospective cone-beam computed tomography evaluation

Background/purpose

One of the most complexes in root and canal anatomy is the maxillary first permanent molar. This study aimed to analyze the frequency of mesiobuccal (MB2) canal and its apical portals of exit, in patients belonging to different gender-age groups and determine the possible relation with sex and age.

Materials and methods

A CBCT scan images were accessed from a documented database of 343 patients (178 male, 165 female), who had an oral and maxillofacial examination. The age of the patients ranging from 12 to 63 years. The frequency of the MB2 canal and its portals of exit apically were observed. Age and gender correlation were calculated using the χ2 test. P < 0.05 was considered significant.

Results

A total of 634 maxillary first molars (335 male, 299 female) were included. The MB2 canal was found in 53.78% of the cases. A significantly higher incidence of the MB2 canal was detected in males than in females. No correlation in the presence and/or absence of the MB2 canal in terms of age. When MB2 canal present, a single apical foramen was observed in 66.28% of the cases, two apical foramina were present in 33.72% of the cases.

Conclusion

MB2 canals may be present in approximately half of the cases, from which one third of the cases have their own apical portal of exit.

Perforation of the maxillary sinus floor during apical surgery of maxillary molars: A retrospective analysis using cone beam computed tomography

This retrospective analysis assessed a possible correlation of perforation of the maxillary sinus floor during apical surgery of maxillary molars and the distances from the treated apices/periapical radiolucencies to the sinus floor. The material included 168 apical surgeries of maxillary first or second molars performed from 1999 to 2016. In 22 (out of 33) perforation cases, a preoperative cone beam computed tomography (CBCT) was available. These cases were defined as the test group. From the pool of operated cases without sinus floor perforation, matching cases - that is, same treated tooth, similar age and same gender - were selected as a control group (N = 26). Mean linear distances from root apices or radiolucencies to sinus floor were significantly shorter in the test group compared to the control group. In conclusion, perforation cases were significantly closer to the sinus floor than cases without perforation.

An investigation into dose optimisation for imaging root canal anatomy using cone beam CT

OBJECTIVES

To identify a dose as low as diagnostically acceptable and a threshold level of image quality for cone beam CT (CBCT) imaging root canals, using maxillary first molar (M1M) second mesiobuccal (MB2) canals of varying complexity for two CBCT scanners.

METHODS

Dose-area product (DAP) and contrast-to-noise ratio (CNR) were measured for two scanners at a range of exposure parameters. Subjective-image-quality assessment at the same exposures was performed for three M1Ms of varying MB2 complexity, positioned in an anthropomorphic phantom. Nine raters (three endodontists, three dental radiologists and three junior staff) assessed canal visibility, using a 5-point confidence scale rating.

RESULTS

Identification of simple-moderate MB2 canal complexity was achieved at a range of protocols, with DAP values of ≥209.3 and ≥203.2 mGy cm² and CNRs of 3 and 7.6 for Promax^®3D and Accuitomo-F170^® respectively. For complex canal anatomy, target subjective image quality was not achieved, even at the highest DAP values for both scanners. Junior staff classified significantly more images as undiagnostic compared with senior staff (p = 0.043).

CONCLUSIONS

In this first study to address optimisation of CBCT imaging of root canal anatomy, a similar threshold dose for both scanners was identified for M1Ms with simple-moderate MB2 canal complexity. Increasing dose to enhance visualisation of more complex canal anatomy was ineffective. Selection of standard protocols (while avoiding lower kV/mA protocols) instead of high-resolution scans was a practical means of reducing patient dose. CNR is not a transferable measure of image quality.

Management of odontogenic sinusitis: multidisciplinary consensus statement

BACKGROUND

Odontogenic sinusitis (ODS) can present a therapeutic dilemma because multiple treatment strategies have been reported. ODS review articles have been published, but they have lacked multidisciplinary collaboration and an evidence-based methodology. The purpose of this article was to perform an evidence-based review of ODS management options, and develop a multidisciplinary consensus statement on ODS management options.

METHODS

An evidence-based review of dental and medical literature on ODS management was performed using PubMed, EMBASE, and Cochrane Review Databases up to December 2019. Exclusion criteria included non-English-language articles, case series with fewer than 10 patients, fungal sinusitis, and studies that did not report treatment success rates. Because aggregate levels of evidence for recommendations were no higher than level C, a clinical consensus statement was conducted using a modified Delphi method.

RESULTS

Sixteen articles met inclusion criteria for the evidence-based review on the following ODS management options: dental treatment alone or combined with ESS for various dental pathologies, and endoscopic sinus surgery (ESS) alone for dental implant-related ODS. Strong consensus was achieved for 9 of the 10 clinical statements, the strongest being the use of shared decision-making for selecting management strategies. No consensus was reached for determining the extent of ESS necessary for uncomplicated ODS.

CONCLUSION

Strong consensus was reached that ODS management should involve shared decision-making between the otolaryngologist, dental provider, and patient, where the benefits and risks of dental treatment and ESS are discussed. Higher-quality studies are necessary to develop evidence-based treatment recommendations for ODS.