Light-emitting Diode Assessment of Dentinal Defects after Root Canal Preparation with Profile, TRUShape, and WaveOne Gold Systems

Post-Instrumentation Dentinal Microcracks Induced by Two NiTi Rotary Systems with Increased Super Elasticity and Shape Memory: A MicroCT Comparative and Methodological Ex Vivo Study

This study aimed to determine the incidence of dentinal microcracks after instrumenting the root canals of maxillary premolars using two novel rotary instrumentation systems. Micro-computed tomography (microCT) scans and images generated by sectioning and observation with a stereomicroscope were used to assess the specimens. Twenty-two freshly extracted maxillary premolars were collected and the specimens were divided into two groups of eleven. The tested radicular shaping systems were XP-Endo shaper and TRUShape (i.e., single file). The specimens were scanned with microCT pre- and post-instrumentation, and the newly formed microcracks were detected. The post-instrumentation scans were also compared with images obtained by sectioning method and stereomicroscope inspection, comparing the incidence of microcracks in either microCT scans or images. The results identified an overall incidence of 0.49% of newly formed microcracks, with no statistically significant differences (p = 0.689) between the shaping systems (0.11% for TRUShape and 0.87% for XP-Endo shaper). There were statistically significant differences (p < 0.001) between the microcracks incidence in microCT scans and the sectioning method (16.6% more for the latter). In conclusion, the results show that neither TRUShape nor XP-Endo shaper created dentinal microcracks during root canal instrumentation. The sectioning method with stereomicroscope evaluation overestimates the presence of microcracks with a statistically significant difference compared to microCT scans.

Micro-CT analysis of dentinal microcracks on root canals filled with a bioceramic sealer and retreated with reciprocating instruments

This study aimed to analyze the potential occurrence of dentinal defects after the removal of a root canal filling with two different sealers using Reciproc (RC) or Reciproc Blue (RB). The mesial roots of 60 mandibular molars with a Vertucci type IV configuration were selected. The samples were initially instrumented with Reciproc (R25) and then divided into the following four experimental groups according to the endodontic sealer and retreatment instrument (n = 15): BC Sealer/Reciproc (BCRC); BC Sealer/Reciproc Blue (BCRB); AH Plus/Reciproc (AHRC); and AH Plus/Reciproc Blue (AHRB). Then, the samples were scanned under micro-CT after obturation and removal of the filling material. Two analyses were conducted. First, an evaluation was performed on all the axial images, and another analysis evaluated each millimeter of the 10 mm from the apex. Dentinal defects were observed in all the samples. All of the identified defects in the images after filling material removal were present in the corresponding images after obturation. The use of AH Plus and EndoSequence BC Sealer, and filling material removal using RC and RB instruments did not induce dentinal defects.

Influence of Root Canal Preparation on Formation of Dentinal Microcracks: A Systematic Review

The effect of root canal preparation technique on microcrack initiation is a controversial issue. This systematic review aimed to assess the role of root canal preparation techniques with different kinematics (manual, rotary, reciprocating, adaptive, self-adjusting file) on microcrack initiation. In vitro and in situ studies comparing the influence of at least two different root canal preparation techniques on the initiation of dentin microcracks were searched in PubMed/MEDLINE and SCOPUS up to June 5, 2018 without language and period restriction. Two authors independently reviewed all identified titles and abstracts for eligibility. Tables were generated to summarize the included studies, and the included studies were assessed for bias. Fifty-four (n=54) articles met the eligibility criteria. The results were classified according to the method used for microcrack evaluation, and most studies that used micro-computed tomography showed no formation of new cracks after root canal preparation. In general, the instrumentation techniques induced microcrack formation when the methods were destructive, irrespective of kinematics. In relation to the apex region, when the preparation working length was set as the root canal length subtracted of 1 mm, the risk of microcrack initiation reduces. The majority of the included studies had low risk of bias for all assessed domains. Our results seem to indicate that the various root canal preparation techniques considered in this study will not cause damage to the dental structure when adequately employed and the proper methodology is applied.

Influence of Negotiation, Glide Path, and Preflaring Procedures on Root Canal Shaping-Terminology, Basic Concepts, and a Systematic Review

INTRODUCTION

Negotiation, glide path, and preflaring are essential steps in root canal shaping procedures. This report aimed to discuss the terminology, basic concepts, and clinical considerations of negotiation, glide path, and preflaring procedures and the influence of these steps on root canal shaping.

METHODS

This systematic review was undertaken following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The protocol has been registered with the International Prospective Register of Systematic Reviews (number CRD42019127021). A comprehensive literature search was performed by 2 independent reviewers using a selected search strategy in 2 electronic databases (PubMed and Scopus) until January 28, 2019. A further search was performed manually in endodontic journals. Studies investigating or comparing at least 1 shaping property resulting from root canal instrumentation with a glide path or preflaring in human extracted teeth or clinical studies were included.

RESULTS

The literature shows that the definition of glide path and preflaring procedures remains controversial, which requires an elaboration in the American Association of Endodontists' Glossary of Endodontic Terms. After the removal of irrelevant and duplicated articles, 98 articles were included. The impact of glide path preparation and preflaring on working length determination, apical file size determination, canal transportation, separation of endodontic files, shaping time, dentinal microcrack formation, and extrusion of debris was discussed. Because of heterogeneity among the included studies, quantitative synthesis was not performed for most of the parameters.

CONCLUSIONS

An evidence-based guideline is needed to define and correlate the basic concepts and current applications of each step of contemporary advancements in root canal instruments. Glide path preparation reduces the risk of debris extrusion, has no influence on the incidence of dentinal crack formation, and improves the preservation of the original canal anatomy. The creation of a glide path may have no impact on Reciproc files (VDW, Munich, Germany) in reaching the full working length. Preflaring increases the accuracy of working length determination. Further randomized clinical trials are required to evaluate the effect of a glide path and preflaring on root canal treatment outcomes.

Effect of Root Canal Preparation Techniques on Crack Formation in Root Dentin

INTRODUCTION

The aim of this study was to assess the frequency of root crack formation caused by the use of manual instrumentation, 2 rotary systems, and 1 reciprocating system using light-emitting diode transillumination.

METHODS

One hundred fifty mandibular premolars were randomly divided into 5 groups (n = 30): control 1, no intervention; control 2, instrumented with hand files; group 3, instrumented with ProTaper Universal rotary files (Dentsply Maillefer, Ballaigues, Switzerland); group 4, instrumented with OneShape rotary files (Micro-Mega, Besancon, France); and group 5: instrumented with the WaveOne reciprocal system (Dentsply Maillefer, Ballaigues, Switzerland). After root canal preparations, the roots were sectioned at 3, 6, and 9 mm from the apex with water irrigation. The slices were inspected under a stereomicroscope with light-emitting diode transillumination from the buccal, lingual, mesial, and distal directions at ×40 magnification to determine the presence/absence of cracks (dentinal defects). The chi-square test was used to analyze the data.

RESULTS

There was a significant difference among the groups in crack frequency (P < .05). The 2 single systems had significantly higher cracks than the other 3 groups. At 3 mm from the apex, there were significantly more cracks in groups 4 and 5 than in groups 1, 2, and 3 (P < .05). At 6 mm from the apex, no significant difference was noted (P > .05). At 9 mm from the apex, the frequency of cracks in group 3 was significantly higher (P < .05).

CONCLUSIONS

According to the results, using rotary instrumentation can result in some dentinal defects, and single-file systems, regardless of motion type, can cause significantly higher crack formation in the apical third of root canals.

Separation of Nickel-Titanium Rotary and Reciprocating Instruments: A Mini-Review of Clinical Studies

Objective:

This review aimed to evaluate clinical studies that assessed separated NiTi rotary and reciprocating instruments.

Design and Methods:

This review assessed clinical studies involving treatments performed by undergraduate students, graduate students, and endodontic specialists. This review evaluated studies using rotary instruments, reciprocating instruments, and hybrid techniques. The number of uses of the different NiTi rotary and reciprocating systems was also assessed.

Results:

The incidence of separation for rotary instruments ranged from 0% to 23%. Rotary instruments were used from 1 to 50 times depending on the instrument and tooth type. The lowest rate of incidence separation for rotary instruments was obtained by undergraduate students, using a hybrid technique. The separation incidence for reciprocating instruments ranged from 0% to 1.71%. Reciprocating instruments were mostly single-used; one study reported their use up to 3 times. Separation rate in reciprocating instruments was similar in single-use or in multiple uses 0.2%.

Conclusions:

Separation of instruments has dropped recently and seems to be a minor problem in current Endodontics. Multiple uses of NiTi rotary instruments are a possibility without significantly increasing the risk of instrument separation. Single and multiple uses of NiTi reciprocating instruments are also associated with low incidence of separation. Attempting to remove separated instruments should be carefully evaluated.

Root-originating dentinal defects: methodological aspects and clinical relevance

It was in the 1980s when the association between root-filling procedures and dentinal microcracks was made. Nowadays, root-originating microcracks, also known as dentinal defects, are recognized as a possible precursor that is part of the longitudinal process of root-originating fractures. The presence of dentinal defects has been shown to significantly decrease the outcome through a periapical microsurgery model. Several in vitro articles have been published in the past years in regards to dentinal defects, but most of them have serious methodology concerns that will be discussed in this review.

A total grasp of the development and the role dentinal defects play in endodontics is crucial to the specialty. This review aims to discuss dentinal defects and their causative factors and the research models that have been used and their clinical significance. Through a comprehensive critical review of the literature, this article will express the need for further in vivo clinical research and better ex vivo methods that can replicate the clinical setting to answer several remaining questions about the development of and the role dentinal defects play in endodontics.

Effect of Reciprocating Systems and Working Lengths on Apical Microcrack Development: a micro-CT Study

Abstract The objective of this study was to evaluate the effect of root canal preparation with single-file reciprocating systems at different working lengths on the development of apical microcracks using micro-computed tomographic (micro-CT) imaging. Forty extracted human mandibular incisors were randomly assigned to 4 groups (n=10) according to the systems and working length used to prepare the root canals: Group A - WaveOne Gold at apical foramen (AF), Group B - WaveOne Gold 1 mm short of the AF (AF-1 mm), Group C - Unicone (AF) and Group D - Unicone (AF-1 mm). Micro-CT scanning was performed before and after root canal preparation at an isotropic resolution of 14 µm. Then, three examiners assessed the cross-sectional images generated to detect microcracks in the apical portion of the roots. Apical microcracks were visualized in 3, 1, 1, and 3 specimens in groups A, B, C, and D, respectively. All these microcracks observed after root canal preparation already existed prior to instrumentation, and no new apical microcrack was detected. For all groups, the number of slices presenting microcracks after root canal preparation was the same as before canal preparation. Root canal preparation with WaveOne Gold and Unicone, regardless of the working length, was not associated with apical microcrack formation.

Vertical Root Fracture initiation in curved roots after root canal preparation: A dentinal micro-crack analysis with LED transillumination

Background

One of the causative factors of root defects is the increased friction produced by rotary instrumentation. A high canal curvature may increase stress, making the tooth more susceptible to dentinal cracks. The purpose of this study was to evaluate dentinal micro-crack formation with the ProTaper NEXT and ProTaper Universal systems using LED transillumination, and to analyze the micro-crack generated at the point of maximum canal curvature.

Material and Methods

60 human mandibular premolars with curvatures between 30-49° and radii between 2-4 mm were used. The root canals were instrumented using the Protaper Universal® and Protaper NEXT® systems, with the aid of the Proglider® system. The obtained samples were sectioned transversely before subsequent analysis with LED transillumination at 2 mm and 8 mm from the apex and at the point of maximum canal curvature. Defects were scored: 0 for no defects; and 1 for micro-cracks.

Results

Root defects were not observed in the control group. The ProTaper NEXT system caused fewer defects (16.7%) than the ProTaper Universal system (40%) (P<0.05). The ProTaper Universal system caused significantly more micro-cracks at the point of maximum canal curvature than the ProTaper NEXT system (P<0.05).

Conclusions

Rotary instrumentation systems often generate root defects, but the ProTaper NEXT system generated fewer dentinal defects than the ProTaper Universal system. A higher prevalence of defects was found at the point of maximum curvature in the ProTaper Universal group. Key words:Curved root, Micro-crack, point of maximum canal curvature, ProTaper NEXT, ProTaper Universal, Vertical root fracture.

Light-emitting diode assessment of dentinal defects: the role of presumed extraction forces

Objectives

The evaluation of iatrogenic dentinal defects in extracted teeth may be influenced by extraction forces and prolonged dry times. The purpose of this study was to compare the presence of dentinal defects in freshly extracted, periodontally compromised teeth with those in a group of teeth with uncontrolled extraction forces and storage time.

Materials and Methods

The experimental group consisted of eighteen roots obtained from teeth extracted due to periodontal reasons with class II or III mobility. They were kept in saline and sectioned within 1 hour following extraction. The control group consisted of matched root types obtained from an anonymous tooth collection, consistent with previous dentinal defect studies. The slices were obtained at 3, 6, and 9 mm from the apex. The imaging process exposed all specimens to no more than 60 seconds of dry time. The × 12.8 magnification was used for the 9 mm slices and × 19.2 magnification for the 3 mm and 6 mm slices under light-emitting diode (LED) transillumination. The root canal spaces and periodontal tissues were masked to minimize extraneous factors that might influence the evaluators. Chi-square test was used for statistical analysis.

Results

Dentinal defects were detected in 17% of the experimental group teeth, compared to 61% of control teeth (p = 0.015).

Conclusions

LED transillumination assessment of freshly extracted roots with class II or III mobility showed smaller number of dentinal defects than roots with uncontrolled storage time and extraction forces. The use of freshly extracted roots with mobility should be considered for future dental defect assessment studies.

Occurence of dentinal defects after root canal preparation with R-phase, M-Wire and Gold Wire instruments: a micro-CT analysis

BACKGROUND

This study aims to evaluate the frequency of dentinal defects after root canal preparation with the ProTaper NEXT, K3XF and WaveOne GOLD systems using microcomputed tomography.

METHODS

Sixty permanent mandibular incisors with a single canal were selected. Inspection of the teeth was performed under a stereomicroscope (15x) to observe the presence of pre-existing cracks and fractures lines. Samples were divided into three experimental groups (n = 20): ProTaper NEXT (PTN), K3XF (K3XF) and WaveOne GOLD (WOG). Specimens were scanned through high-resolution microcomputed tomography before and after the preparation of the root canal. Subsequently, all the axial images were examined by two different methods to find possible dentinal defects. Furthermore, an analysis of each millimeter of ten apical millimeters was also performed. The absence or presence of dentinal defects was screened by 3 pre-calibrated blinded examiners.

RESULTS

After analysing all 45,720 slices, dentinal defects were observed in 48,33% (22096 slices). PTN, K3XF and WOG groups represented 11,11% (5079 slices), 17,22% (7873 slices) and 20% (n = 9144) of the cross-sectional images, respectively. At 10 apical millimeters (600 slices), 33,33% (200 slices) presented some dentinal defects, representing 7,22% (43 slices), 13,33% (80 slices) and 12,77% (77 slices) of the cross-sectional images in the PTN, K3XF and WOG groups, respectively. All the dentinal defects presented in the postoperative images existed in the images prior to instrumentation.

CONCLUSIONS

There was no correlation between the preparation of a root canal using the PTN, K3XF and WOG systems and the formation of new dentinal defects.

Detection of Apical Root Cracks Using Spectral Domain and Swept-source Optical Coherence Tomography

INTRODUCTION

This study aimed to evaluate the ability of 2 optical coherence tomographic (OCT) systems to detect apical dentinal microcracks.

METHODS

Twenty extracted human single-rooted mandibular incisors were selected. After root canal preparation with an R40 Reciproc file (VDW, Munich, Germany), the specimens presenting apical microcracks were identified using micro-computed tomographic (micro-CT) scanning as the gold standard. Then, the apical portions of the roots were imaged with spectral domain OCT (SD-OCT) and swept-source OCT systems, and the resulting images were blindly evaluated by 3 independent examiners to detect microcracks. The diagnostic performance of each OCT device was calculated, and statistical analysis was performed.

RESULTS

Based on the micro-CT images, 12 (60%) roots presented dentinal microcracks in the apical region. The images generated by the OCT systems were able to show microcrack lines at the same location as the corresponding micro-CT cross sections. Although the diagnostic performance of the SD-OCT device was superior, there were no statistically significant differences between the 2 OCT devices (P > .05). Interexaminer agreement was substantial to almost perfect for the SD-OCT system and moderate to almost perfect for the swept-source OCT system, whereas intraexaminer agreement was substantial to almost perfect for both OCT devices.

CONCLUSIONS

The detection ability verified for both OCT systems renders them promising tools for the diagnosis of apical microcracks.