A liquid chromatographic method for simultaneous determination of amoxicillin sodium and sulbactam sodium in a combination formulation

Dual-channel Microchip Electrophoresis with Amperometric Detection System for Rapid Analysis of Cefoperazone and Sulbactam

A dual-channel microchip electrophoresis (ME) with in-channel amperometric detection was developed for cefoperazone and sulbactam determination simultaneously. In this study, a microelectrode detector was made of gold nanoparticles (GNPs) modified indium tin oxide (ITO)-coated poly-ethylene terephthalate (PET) film. The parameters including detection potential applied on working electrode, buffer concentration and pH value were optimized to improve the detection sensitivity and separation efficiency of cefoperazone and sulbactam. Under the optimal conditions, sensitive detection of cefoperazone and sulbactam was obtained with limits of detection (LODs) (S/N = 3) of 0.52 and 0.75 μg/mL, respectively. The plasma sample, which was from a patient with a brain injury taking Sulperazone, was successfully detected with a simple sample pretreatment process by dual-channel ME amperometric detection. This rapid and sensitive method possesses practical potential in clinical applications, and could provide a guidance for clinical rational drug use.

An UHPLC-MS/MS method for the simultaneous determination of ampicillin and sulbactam in human plasma and urine

BACKGROUND

With few new antibiotics available and an increased prevalence of multidrug-resistant bacteria, optimizing the effectiveness of currently available antibiotics and minimizing the potential for emerging resistance, through PK characterization, is of paramount importance.

RESULTS

Inter- and intra-assay results for ampicillin were within 5% for accuracy and 7% for precision, and for sulbactam within 7% for accuracy and 7% for precision, for both plasma and urine. The plasma Cmax was 38.4 µg/ml for ampicillin and 19.0 µg/ml for sulbactam. The urine concentrations were 668 µg/ml for ampicillin and 438 µg/ml for sulbactam.

CONCLUSION

An UHPLC-MS/MS method to simultaneously measure co-formulated ampicillin and sulbactam in plasma and urine, for use in a patient PK study, has been developed and validated.

Ultraviolet spectrophotometry (dual wavelength and chemometric) and high performance liquid chromatography for simultaneous estimation of meropenem and sulbactam sodium in pharmaceutical dosage form

UV spectrophotometric and high performance liquid chromatography (HPLC) methods were developed for simultaneous determination of meropenem (MERM) and sulbactam sodium (SB) in injection. UV spectrophotometric methods were developed using 0.1N sodium hydroxide as solvent. The Beer's plot for dual wavelength method was linear in the range of 4-24 μg mL(-1) and 2-12 μg mL(-1) for MERM and SB, respectively. The percent recoveries were found to be 98.52±1.23% for MERM and 101.45±1.1% for SB. Chemometrics assisted UV spectrophotometry was performed using Partial Least Square (PLS) analysis model and Principal Component Regression (PCR) analysis model. The % recoveries of the MERM were found to be 100.61±0.06% and 101.31±0.12% using PLS and PCR, respectively. The % recoveries of the SB were found to be 98.29±0.09% and 97.61±0.13% using PLS and PCR, respectively. Chromatography was performed on Hypersil BDS C18 column using methanol:acetonitrile:water (10:20:70 v/v/v) as mobile phase. The retention times of MERM and SB were found to be 2.9 min and 2.25 min, respectively. Developed HPLC method was found to be linear in the range of 50-250 μg mL(-1) and 25-125 μg mL(-1) for MERM and SB, respectively. The % recoveries were found to be 98.85±0.25% and 98.63±0.34% for MERM and SB, respectively. The developed analytical methods did not show any interference of the excipients when applied to pharmaceutical dosage form.

Determination of antibiotics in Brazilian surface waters using liquid chromatography-electrospray tandem mass spectrometry

A liquid chromatography-electrospray tandem mass spectrometry (LC-MS/MS) method for the determination of antibiotics in water was developed and applied to Brazilian surface waters. Amoxicillin, ampicillin, cefalexin (CEF), ciprofloxacin (CIP), norfloxacin (NOR), sulfamethoxazole, tetracycline (TET), and trimethoprim were selected as target compounds due to their high consumption pattern in Brazil. LC and MS conditions were optimized to produce the maximum analytic response for each compound. Anion exchange and polymeric solid-phase extraction cartridges, in series, were employed during the extraction procedures. Recovery, linear range, limit of detection (LOD), and limit of quantification were calculated. LOD varied from 0.13 ng L(-1) for CIP and NOR to 0.76 ng L(-1) for TET. Surface water samples from the Atibaia watershed (São Paulo State, Brazil) were analyzed. Results showed that seasonal and anthropogenic aspects dictated the levels of antibiotics in the samples. An overall frequency of detection of 55% was observed during the rainy period, whereas a higher percentage (88%) was noticed for samples collected during the dry season. In the Atibaia River, sample concentrations ranged from 29 ng L(-1) for CEF to 0.5 ng L(-1) for NOR. In a sewage-affected stream, however, concentrations up to 2422 ng L(-1) CEF were found.

Polymer Membrane Electrodes for Sensitive Potentiometric Determination of β-blockers

The construction of PVC matrix-type beta-blockers (sotalol, carvedilol, and betaxolol) ion selective electrodes and their use for direct potentiometry of their respective species are described. The proposed sensors are based on the complex ion associates of beta-blockers with tungstophosphate (TP) and Ammonium Reineckate (Rein) ionophoris in poly vinyl chloride membrane (PVC) with Dioctylphthalate (DOP) plasticizer. The four electrodes (Beta-TP), (Sota-TP), (Carve-TP), and (Cave-Rein) show stable potential response with near Nernstian slope of 50.8, 33.7, 32.35, and 33 mv per decade, range of concentration 10-2-10-7 M beta-blockers. Selectivity coefficients data obtained for 11 different organic and inorganic ions are presented. The electrodes have fast response time (30 and 40 s) and were used over wide range of pH 4.5-8.5. Validation of the method according to the quality assurance standers shows suitability of proposed sensors for use in the quality control assessment of these drugs. The results obtained for the determination of beta-blockers with the proposed electrodes show average recoveries of 100.78% and a mean standard deviation of +/-1.2. The nominal are obtained. The data agree well with those obtained by standard methods.

Simultaneous determination of ampicillin, cefoperazone, and sulbactam in pharmaceutical formulations by HPLC with β-cyclodextrin stationary phase

An accurate and reproducible method for the simultaneous determination of ampicillin (AMP), sulbactam (SUL), and cefoperazone (CFP) in pharmaceutical formulations by using HPLC with beta-CD stationary phase was developed. It involved the use of the added tetraethylammonium acetate (TEAA) reagent, pH, and methanol as the significant parameters to find the optimum separation condition. A high resolution and selectivity of analytes was obtained by running the mobile phase in methanol-5 mM TEAA buffer = 35:65 (v/v, pH 4.5) at 280 nm. The mean recoveries ranged from 96.6 to 103.3% for AMP in the synthetic mixture, 97.6 to 103.0% for SUL, and 97.0 to 104.0% for CFP. The low LOD (<1.8 microg/mL) and low CV (<0.9%) assured that this method was sensitive and reproducible. The assay of analytes in commercial products exhibited that it was convenient and reproducible for routine analyses of these components in sterilized H(2)O, saline, or 5% dextrose injection solutions.

Chromatographic analysis of penicillins in pharmaceutical formulations and biological fluids

Natural penicillin (benzylpenicillin) is the oldest antibiotic observed by Alexander Fleming in 1928. To broaden its spectrum of activity, natural penicillin was modified, giving rise to a group of antibiotics under the name 'penicillins'. Although an increasing number of bacteria appear to be resistant to them, penicillins are used to treat a variety of bacterial infections including Gram-positive, Gram-negative aerobic and anaerobic bacteria. Consequently, they are widely used in human and veterinary medicine to prevent and treat diseases. This review covers the analytical methodologies, mainly chromatographic, employed to the penicillins determination in pharmaceutical formulations, biological fluids and in production-scale fermentations reported in the literature. Results of published assays are comparatively presented focusing on sample preparation regarding isolation and purification, chromatographic conditions and method validation. Information on chemical structure, spectrum of activity and action mechanism of common penicillins has also been given.