Eu-based metal-organic framework as a multi-responsive fluorescent sensor for efficient detecting Cr2O72− and tetracycline hydrochloride

Recent progress in lanthanide-based fluorescent nanomaterials for tetracycline detection and removal

Tetracycline (TC) has been widely used in clinical medicine and animal growth promotion due to its broad-spectrum antibacterial properties and affordable prices. Unfortunately, the high toxicity and difficult degradation rate of TC molecules make them easy to accumulate in the environment, which breaks the ecological balance and seriously threatens human health. Rapid and accurate detection of TC residue levels is important for ensuring water quality and food safety. Recently, fluorescence detection technology of TC residues has developed rapidly. Lanthanide nanomaterials, based on the high luminescence properties of lanthanide ions and the high matching with TC energy levels, are favored in the real-time trace detection of TC due to their advantages of high sensitivity, rapidity, and high selectivity. Therefore, they are considered potential substitutes for traditional detection methods. This review summarizes the synthesis strategy, TC response mechanism, removal mechanism, and applications in intelligent sensing. Finally, the development of lanthanide nanomaterials for TC fluorescence detection and removal is reasonably summarized and prospected. This review provides a reference for the establishment of a method for the accurate determination of TC content in complex food matrices.

High-Entropy Lanthanide-Organic Framework as an Efficient Heterogeneous Catalyst for Cycloaddition of CO2 with Epoxides and Knoevenagel Condensation

Multimetallic synergistic effects have the potential to improve CO2 cycloesterification and Knoevenagel reaction processes, outperforming monometallic MOFs. The results demonstrate superior performance in these processes. To investigate this, we created and characterized a selection of single-component Ln(III)-MOFs (Ln=Eu, Tb, Gd, Dy, Ho) and high-entropy lanthanide-organic framework (HE-LnMOF) using solvent-thermal conditions. The experiments revealed that HE-LnMOF exhibited heightened catalytic efficiency in CO2 cycloesterification and Knoevenagel reactions compared to single-component Ln(III) MOFs. Moreover, the HE-LnMOF displayed significant stability, maintaining their structural integrity after five cycles while sustaining elevated conversion and selectivity rates. The feasible mechanisms of catalytic reactions were also discussed. HE-LnMOF possess multiple unsaturated metal centers, acting as Lewis acid sites, with oxygen atoms connecting the metal, and hydroxyl groups on the ligand serving as base sites. This study introduces a novel method for synthesizing HE-LnMOF and presents a fresh application of HE-LnMOF for converting CO2.

Site-recognition boosted the sensing performance of terbium-based organic frameworks for UO22+ detection

A unique fluorescent sensing probe for UO22+ detection was fabricated with terbium-based metal organic frameworks via introducing specific recognition sites (denoted as Tb-TDPAT). The newly formed Tb-TDPAT presented remarkable detection sensitivity and selectivity towards UO22+, surpassing the need for complex post-modification methods.

Ratiometric fluoroprobe based on Eu-MOF@Tb3+ for detecting tetracycline hydrochloride in freshwater fish and its application in rapid visual detection

Tetracycline hydrochloride (TCH), a prevalent antibiotic in aquaculture for treating bacterial infections, poses challenges for on-site detection. This study employed the reversed-phase microemulsion method to synthesize a uniform nano metal-organic framework (MOF) material, europium-benzene-p-dicarboxylic acid (Eu-BDC), doped with Tb3+ to form a dual-emission fluorescence probe. By leveraging the combined a-photoinduced electron-transfer (a-PET) and inner filter effect (IFE) mechanisms, high-sensitivity TCH detection in Carassius auratus and Ruditapes philippinarum was achieved. The detection range for TCH is 0.380-75 μM, with a low limit of detection (LOD) at 0.115 μM. Upon TCH binding, Eu-BDC fluorescence rapidly decreased, while Tb3+ fluorescence remained constant, establishing a ratiometric fluorescence change. Investigation into the TCH quenching mechanism on Eu-BDC was conducted using time-dependent density functional theory (TD-DFT) calculations and fluorescence quenching kinetic equations, suggesting a mixed quenching mechanism. Furthermore, a novel photoelectric conversion fluorescence detection device (FL-2) was developed and evaluated in conjunction with high-performance liquid chromatography-diode-array detection (HPLC-DAD). This is the first dedicated fluorescence device for TCH detection, showcasing superior photoelectric conversion performance and stability that reduces experimental errors associated with smartphone photography methods, presenting a promising avenue for on-site rapid TCH detection.

Lanthanide MOFs based portable fluorescence sensing platform: Quantitative and visual detection of ciprofloxacin and Al3

In the current context of water environmental monitoring and pollution control, there's a crucial need for rapid and simple methods to detect multi-pollutant. We herein report an easy one-step hydrothermal synthesis method to produce Eu-based metal-organic frameworks (Eu MOFs), which was used as a fluorescent probe to detect the aquatic environmental pollutants of ciprofloxacin (CIP) and aluminum ions (Al3+). This fluorescent sensor enabled the cascade detection of CIP and Al3+ through fluorescence enhancement and ratio fluorescence response, respectively. The introduction of CIP significantly turned on the characteristic fluorescence of Eu MOFs at 595 nm and 616 nm through the "antenna effect". Based on this, the sensor enables quantitative detection of CIP within a linear range of 0-120 μM with a LOD as low as 50.421 nM. In the presence of Al3+, the fluorescence emission of Eu MOFs-CIP was sharply turned off due to strong Al3+ coordination with CIP, while the blue fluorescence emission of CIP was remarkably enhanced. And thus allowing ratio fluorescence quantitative detection of Al3+ (LOD = 2.681 μM). The introduction of CIP and Al3+ in cascade resulted in distinct fluorescence color changes from colorless to red and eventually to blue, exhibiting pronounced fluorescence characteristics. This observable phenomenon enables the visual detection of CIP and Al3+ in both aqueous phase and paper test strips. By combining the analysis of fluorescence chromaticity with the use of a smartphone, the fluorescence color of test papers allows for simple quantitative determination, which provides a convenient and accessible approach for quantifying CIP and Al3+ in water environments.

Europium metal-organic frameworks: Synthesis, characterization, and application as fluorescence sensors for the detection of Cu2+, Ni2+ cations and T3, T4 hormones

The solvothermal approach was used to create a novel Eu metal-organic framework (Eu-MOF) based on 1,4-benzendicarboxylic acid (TPA), 1,10-phenanthroline, and N,N-dimethylformamide (DMF)/H2O. Structural analysis of Eu-MOF, Fluorescence spectrometry, Fourier Transform Infrared Spectrometer (FTIR), Scanning Electron Microscopy (SEM), Energy dispersive X-ray (EDX) mapping, Thermo-gravimetric analysis (TGA), and Single Crystal X-Ray Diffraction (PXRD) methods. Using the fluorescence properties of the synthesized Eu-MOF, its use as a fluorescence sensor in the determination of different analytes, such as organic molecules (T3-T4 hormone, ascorbic acid, and glucose) and metal ions (Na+, K+, Ca2+, Mg2+, Cu2+, Mn2+, Hg2+, Pb2+, Ni2+, Cr3+, Al3+, Fe3+), was investigated. Fluorescence experiments revealed that Cu2+, Ni2+ cations, as well as T3 and T4 hormones, quenched the fluorescence of Eu-MOF. Turn-off luminescence can be induced by 10 μM Cu2+, 30 μM Ni2+ cations, 500 nM T3, and 800 nM T4 hormones. Fluorescence quenching efficiencies were calculated for Cu2+, Ni2+, T3, and T4 99.7%, 99.6%, 98.7%, and 98.2%, respectively.

Surface state dominated and carbon core coordinated red-emitting carbon dots for the detection of Cr2O72- and cell imaging

Cr(VI) as a toxic heavy metal ion can easily enter into the body through drinking or eating and cause liver and kidney diseases as well as cancer. Considering its high biological toxicity and adverse effects on human body, it is desirable to develop a probe to monitor its level in the environment. Herein, a high-efficiency fluorescent nanoprobe based on red emissive carbon dots (R-CDs) was established through a convenient solvothermal strategy. The as-prepared CDs with excitation-independency had the fixed emission wavelength at 627 nm when the excitation wavelength was 560 nm. Further study manifested that the new surface state formed by nitrogen and sulfur doping and the increased conjugated system established through dehydration and carbonization were the main reasons for the fluorescence redshift. In this system, these R-CDs as a fluorescent probe exhibited high specificity and sensitivity to Cr₂O₇^2- with the linear range of 4-40 μΜ and the limit of detection could reach 80.00 nM. The quenching of these CDs by Cr₂O₇^2- was efficiently induced through a static quenching process. Meanwhile, the obtained CDs could enter into HeLa cells through endocytosis and exhibit bright red fluorescence in cells under a confocal laser scanning microscope. Thus, this work provided a promising probe not only for detecting Cr(VI) in natural environment but also for imaging in cells.

High-Symmetry Co/Ni Triazine Polycarboxylate Diverse Frameworks Constructed by Mx(COO)y Building Blocks: Characterization and Catalytic Performance Evaluation of p-Nitrophenol

Three new triazine compounds [Co_1.5(H₃TDPAT)(H₂O)₃]·6H₂O (1), [Co₂(TCPT)(μ₂-H₂O)₂]·OH (2), and [Ni₃(TCPT)]·3OH (3) were designed and synthesized via the reaction of the symmetrical triazine ligand connected by C-N-C and C-O-C bonds with triazine poly(carboxylic acid)s ligands as the side arms: H₆TDPAT (H₆TDPAT = 2,4,6-tris(3,5-dicarboxylphenylamino)-1,3,5-triazine) and H₃TCPT (H₃TCPT = 2,4,6-tris(4-carboxyphenoxy)-1,3,5-triazine) as well as the corresponding metal salts under the solvothermal condition. Three triazine polycarboxylate frameworks were characterized by elemental analysis, infrared spectroscopy, ultraviolet spectroscopy, thermogravimetric analysis, X-ray powder diffraction, and solid fluorescent spectra in detail. The structural analysis results showed that the three-dimensional porous cage framework of compound 1 was constructed by three different polyhedral cages connected with [Co(COO)₄(H₂O)₂] building blocks. One of the compounds, 2, is formed by twin propeller Co₂(μ₂-H₂O)(COO)₃ building blocks connecting two-dimensional layers and the intermolecular π-π interactions involved the triazine rings between the layers. While the structure of compound 3 is similar to that of 2, assembly is by Ni(COO)₃ building blocks and adjacent layers of the face-to-face π-π interaction between the triazine rings. In order to explore functional properties, the catalytic reduction of p-nitrophenol (PNP) of compounds 1-3 was investigated. They exhibit excellent catalytic activity of more than 95% for reduction of PNP with a dose of 2.5 mg of the compounds.