Preparation and characterization of rice starch citrates by superheated steam: A new strategy of producing resistant starch

Improving physicochemical and nutritional attributes of rice starch through green modification techniques

Rice, has long been an inseparable part of the human diet all over the world. As one of the most rapidly growing crops, rice has played a key role in securing the food chain of low-income food-deficit countries. Starch is the main component in rice granules which other than its nutritional essence, plays a key role in defining the physicochemical attributes of rice-based products. However, rice starch suffers from weak techno-functional characteristics (e.g., retrogradability of pastes, opacity of gels, and low shear/temperature resistibility. Green modification techniques (i.e. Non-thermal methods, Novel thermal (e.g., microwave, and ohmic heating) and enzymatic approaches) were shown to be potent tools in modifying rice starch characteristics without the exertion of unfavorable chemical reagents. This study corroborated the potential of green techniques for rice starch modification and provided deep insight for their further application instead of unsafe chemical methods.

Production of resistant starches via citric acid modification: Effects of reaction conditions on chemical structure and final properties

Aiming to contribute to the current knowledge on the impact of reaction conditions on the chemical structure and target properties of starch citrates, in the current contribution different corn starch citrates were prepared by manipulation of reaction time, temperature and citric acid concentration. Modified starches were characterized in terms of chemical structure, morphology, crystallinity, swelling power and resistant starch content. For the first time, total substitution, crosslinking and monosubstitution degrees were quantitatively determined; and the relationship among final chemical structure, reaction conditions and target starch citrates properties was comprehensively analyzed. Products with total substitution values in the range of 0.075-0.24, crosslinking degrees in the 0.005-0.11 interval, and monosubstitution extents within the 0.05-0.12 range, were produced. By proper selection of reaction conditions products with almost 100 % of resistant starch were obtained. Results evidenced that starch citrates properties (mainly swelling power and RS content) depend on both chemical structure and the reaction conditions employed. Actually, the reaction temperature set (120 °C or 150 °C) proved to play a determinant role in the final products properties as evidenced from starch citrates with similar chemical structure and substantially different swelling and digestibility properties.

An Attempt to Replace Pure Citric Acid with Natural Lemon Juice during Potato Starch Esterification

The application of chemical operations in food processing, in which pure chemical compounds are used to modify food ingredients, often raises social concerns. One of the most frequently modified dietary substances is starch, e.g., E1401-E1404, E1412-E1414, E1420, E1422, E1440, E1442, and E1450-E1452. An alternative solution to chemical treatments seems to be the use of raw materials naturally containing substrates applied for starch modification. Heating starch with a lemon juice concentrate can be considered a novel and effective method for producing starch citrate, which is part of the so-called "green chemistry". The modified preparations obtained as a result of potato starch esterification with natural lemon juice had a comparable degree of esterification to that of the esters produced with pure citric acid. In addition, the use of the juice doubled their resistance to amylolytic enzymes compared to the preparations made with pure acid. Replacing citric acid with lemon juice can facilitate the esterification process, and the analyzed properties of both types of modified preparations indicate that starch esters produced with pure citric acid can be successfully replaced by those produced using natural lemon juice, which may increase the social acceptance of these modified preparations.

The properties of the rice resistant starch processing and its application in skimmed yogurt

Extrusion is typically employed to prepare resistant starch (RS). However, the process is complicated. In this study, the effects of twin-screw extrusion on the crystallinity, thermal properties, and functional properties of starch formed in different extrusion zones were investigated. The effects of this process on the rheological properties and microstructure of RS-added skimmed yogurt were also studied. According to the results, the RS content increased from 7.40 % in the raw material to 33.79 % in the extrudate. The A-type crystal structure of the starch was not observed. The dissociation temperature of the extruded starch ranged from 87.76 °C to 100.94 °C. The glycemic index (GI) of skimmed yogurt fortified with 0.4 % RS was 48.7, and the viscosity was also improved. The microstructure exhibited a uniform network of the starch-protein structure. The findings may serve as a theoretical basis for the application of RS in the food industry.

Physicochemical properties and in vitro digestibility of ginseng starches under citric acid-autoclaving treatment

In this study, the effects of citric acid-autoclaving (CA-A) treatment on physicochemical and digestive properties of the native ginseng starches were investigated. The results showed that ginseng starch exhibited a B-type crystal structure with a low onset pasting temperature of 44.23 ± 0.80 °C, but high peak viscosity and setback viscosity of 5897.34 ± 53.72 cP and 692.00 ± 32.36 cP, respectively. The granular morphology, crystal and short-range ordered structure of ginseng starches were destroyed after CA-A treatment. The more short-chain starches were produced, resulting in the ginseng starches solubility increased. In addition, autoclaving, citric acid (CA) and CA-A treatment promoted polymerization and recrystallization of starch molecules, increased the proportion of amylopectin B1, and B3 chains, and improved molecular weight and resistant starch (RS) content of ginseng starches. The most significant multi-scale structural change was induced by CA-A treatment, which reduced the relative crystallinity of ginseng starch from 28.26 ± 0.24 % to 2.75 ± 0.08 %, and increased the content of RS to 54.30 ± 0.14 %. These findings provided a better understanding of the structure and properties of Chinese ginseng starches and offered new ideas for the deep processing of ginseng foods.

Functionalization Methods of Starch and Its Derivatives: From Old Limitations to New Possibilities

It has long been known that starch as a raw material is of strategic importance for meeting primarily the nutritional needs of people around the world. Year by year, the demand not only for traditional but also for functional food based on starch and its derivatives is growing. Problems with the availability of petrochemical raw materials, as well as environmental problems with the recycling of post-production waste, make non-food industries also increasingly interested in this biopolymer. Its supporters will point out countless advantages such as wide availability, renewability, and biodegradability. Opponents, in turn, will argue that they will not balance the problems with its processing and storage and poor functional properties. Hence, the race to find new methods to improve starch properties towards multifunctionality is still ongoing. For these reasons, in the presented review, referring to the structure and physicochemical properties of starch, attempts were made to highlight not only the current limitations in its processing but also new possibilities. Attention was paid to progress in the non-selective and selective functionalization of starch to obtain materials with the greatest application potential in the food (resistant starch, dextrins, and maltodextrins) and/or in the non-food industries (hydrophobic and oxidized starch).

Comparison of milling methods on the properties of common buckwheat flour and the quality of wantuan, a traditional Chinese buckwheat food

The microstructural and techno-functional properties of buckwheat flour and its processability for making wantuan, as affected by different milling methods, were investigated. Results showed that the particle sizes (d(0.5)) of the flours made by stone-milling (SM), hammer-milling (HM), laboratory grinding with steaming pretreatment for 5 min (LG-5) and 10 min (LG-10) were 95.5, 111.5, 35.4 and 41.1 μm, respectively. Moreover, SM and HM flours had less liberated starch granules and 20.84%-24.32% higher relative crystallinity than LG-10 flour. Slurries of laboratory-grinded flours showed excellent suspension stability. LG-10 flour had lowest pasting viscosities but greatest storage modulus and loss modulus. Color differences among the wantuan made from different flours were not visibly perceived (ΔE < 5). Wantuan made from LG-5 flour exhibited highest textual quality due to its greatest resilience (0.376), good springiness (0.933) and accepted chewiness (1093.31). Concluding, steaming prior to grinding could improve the qualities of buckwheat flour for wantuan making.

Morphological, textural analysis and freeze-thaw stability of starches from legume grow in Cameroon

Starches from some legume grown in Cameroon were evaluated for their granule structure and size, turbidity, firmness and gel strength, thermal and freeze-thaw properties. Amylose contents were in the range of 26.21%-44.85%. Morphological analysis of the starch granules showed bimodal distribution, multiple sizes and shapes from small spherical to the bigger kidney shape. Significant differences were observed among starch in light transmittance, firmness and gel strength. The thermal parameters of starches were evaluated using differential scanning calorimeter and significant differences were observed. The peak gelatinisation temperature was positively correlated to starch granule size but the amylose content showed no evidence of their impact on legume starch properties studied. The data reported can be useful to facilitate the selection of variety of legume and conditions closer to the desired application.

Synthesis and characterization of citrate soft rice starch: A new strategy of producing disintegrating agent for design drug and resistant starch

Assam soft rice starch (ASRS) and Citric acid-esterified Assam soft rice starch (c-ASRS) were studied extensively. FTIR, CHN, DSC, XRD, SEM, TEM and optical microscope studies were performed for native and modified starches. Powder rearrangements, cohesiveness and flowability were studied by the Kawakita plot. Moisture and ash content was around 9 % and 0.5 %. In vitro digestibility of ASRS and c-ASRS produced functional RS. Paracetamol tablets were prepared using ASRS and c-ASRS as granulating-disintegrating agents through wet granulation methods. The prepared tablets' physical properties, disintegrant properties, in vitro dissolution and dissolution efficiency (DE) were performed. The average particle size was obtained at 6.59 ± 0.355 μm and 8.15 ± 0.168 μm for ASRS and c-ASRS, respectively. All the results were statistically significant at p < 0.05, p < 0.01 and p < 0.001. The amylose content was 6.78 %, classifying it as a low amylose type of starch. The disintegration time was reduced with the increasing concentration of ASRS and c-ASRS and facilitated the immediate release of the model drug from the tablet compact to improve its bioavailability. Therefore, the current investigation concludes that ASRS and c-ASRS can be used as novel and functional materials in pharmaceutical industries due to their unique physicochemical attributes. HYPOTHESIS: The central hypothesis of the current work was to develop citrated starch through a one-step reactive extrusion method and investigate its disintegrants property for pharmaceutical tablets. Extrusion is a continuous, simple, high-speed, low-cost, producing very limited wastewater and gas. Characterization was done through different instrumental techniques to confirm successful esterification. The flow properties were evaluated, and tablets were prepared at a different level of ASRS and c-ASRS (disintegrating agent), followed by the evaluation of tablets to confirm the model drug's dissolution and disintegration efficiency. Finally, in vitro digestibility of both ASRS and c-ASRS was analyzed to establish their potential nutritional benefits.

Factors influencing the starch digestibility of starchy foods: A review

Starchy foods are a major energy source of the human diet, their digestion is closely related to human health. Most foods require lots of processing before eating, therefore, many factors can influence starch digestibility. The factors that affect the digestibility of starches have been widely discussed previously, but the extracted starches in those studies were different from those present within the actual food matrix. This review summarizes the factors influencing the starch digestibility in starchy foods. Endogenous non-starch components hinder the starch digestive process. Food ingredients and additives decrease starch digestibility by inhibiting the activity of digestive enzymes or hindering the contact between starch and enzymes. Storage induce the retrogradation of starch, decreasing the digestibility of foods. Therefore, preparing starchy foods with whole grains, processing them as little as possible, using food additives reasonably, and storage conditions may all be beneficial measures for the production of low GI foods.

Citric acid esterified Glutinous Assam bora rice starch enhances disintegration and dissolution efficiency of model drug

The current work was designed to study the starch's physicochemical attributes, tablet disintegration and dissolution efficiency and its derivatives obtained from the glutinous Assam bora rice (G-ABR) variety of Assam, Northeast India. Starch was isolated by a simple protein denaturation method, and a starch derivative was prepared through citric acid modification. G-ABRS and citrated G-ABRS were characterized through FTIR, DSC, XRD and SEM. The rate of consolidation, consolidation index, angle of internal friction, packing rearrangement and cohesive properties were determined to investigate their applications as functional excipients in pharmaceutical industries. G-ABRS and citrated G-ABRS exhibited better packing rearrangement and cohesive properties than standard corn starch. Furthermore, immediate release of API from the tablet compact was observed when the starch concentration increased from 1 to 5 %, indicating facilitation of the tablet compact disintegration. Therefore, G-ABRS and citrated G-ABRS are potentially functional and sustainable materials for pharmaceutical industries.

Preparation and characterization of type 3 resistant starch by ultrasound-assisted autoclave gelatinization and its effect on steamed bread quality

In this study, we aimed to establish an innovative and efficient preparation method of potato resistant starch (PRS). To achieve this, we prepared type 3 resistant starch (RS3) from native potato starch (PS) using an ultrasonic method combined with autoclave gelatinization and optimized by the response surface method to study the structure and properties of potato RS3 (PRS3) and its effect on the quality of steamed bread. Under optimal treatment conditions, the PRS3 content increased from 7.5% to 15.9%. Compared with PS, the B-type crystal structure of PRS3 was destroyed, and the content of hydroxyl groups was increased, but no new chemical groups were introduced. PRS3 had a rougher surface and a lower crystallinity, gelatinization temperature, viscosity, setback value, and breakdown value. The low content (5%) of PRS3 had a stable viscosity and was easily degraded by bacteria, which can improve the quality of steamed bread to a certain extent. When the PRS3 content was over 10%, it competed with the gluten protein to absorb water, which reduced the contents of β-turn and α-helix in the dough, increased the contents of β-fold, and weakened the structure of the gluten network. It also decreased the specific volume and elasticity of the steamed bread and increased the spreading rate, hardness, and chewiness. Steamed bread prepared with a flour mixture containing 5% PRS3 was similar to the presidential acceptance of control flour. In this study, a new sustainable and efficient PRS3 preparation method was established, which has certain guiding significance for the processing of Functional steamed bread with high-resistant starch.

Modified Starch-Based Adhesives: A Review

Consumer trends towards environmentally friendly products are driving plastics industries to investigate more benign alternatives to petroleum-based polymers. In the case of adhesives, one possibility to achieve sustainable production is to use non-toxic, low-cost starches as biodegradable raw materials for adhesive production. While native starch contains only hydroxyl groups and has limited scope, chemically modified starch shows superior water resistance properties for adhesive applications. Esterified starches, starches with ester substituents, can be feasibly produced and utilized to prepare bio-based adhesives with improved water resistance. Syntheses of esterified starch materials can involve esterification, transesterification, alkylation, acetylation, succinylation, or enzymatic reactions. The main focus of this review is on the production of esterified starches and their utilization in adhesive applications (for paper, plywood, wood composites, fiberboard, and particleboard). The latter part of this review discusses other processes (etherification, crosslinking, grafting, oxidation, or utilizing biobased coupling agents) to prepare modified starches that can be further applied in adhesive production. Further discussion on the characteristics of modified starch materials and required processing methods for adhesive production is also included.