Adsorption of copper(II) and lead(II) from seawater using hydrothermal biochar derived from Enteromorpha

Enhanced copper removal by magnesium modified biochar derived from Alternanthera philoxeroides

Adsorption processes are being widely used by various researchers for the removal of heavy metals from waste streams and biochar has been frequently used as an adsorbent. In this study, a MgO-loaded biochar derived from Alternanthera philoxeroides (MAPB) was synthesized for the removal of Cu(II). Compared with other biochar absorbents, MAPB showed a relatively slow adsorption kinetics, but an effective removal of Cu(II) with a maximum sorption capacity of 1, 238 mg/g. The adsorption mechanism of Cu(II) by MAPB was mainly controlled by chemical precipitation as Cu2(OH)3NO3, complexation and ion replacement. Fixed bed column with MAPB packed in same dosage (1, 000 mg) and different bed depth (1.3, 2.6 and 3.9 cm) showed that the increased of bed depth by mixing MAPB with quartz sand could increase the removal of Cu(II). The fitted breakthrough (BT) models showed that mixing MAPB with support media could reduce the mass transfer rate, increase the dynamic adsorption capacity and BT time. Therefore, MAPB adsorbent act as a highly efficient long-term adsorbent for Cu(II) contaminated water treatment may have great ecological and environmental significance.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Application of machine learning in prediction of Pb2+ adsorption of biochar prepared by tube furnace and fluidized bed

Data mining by machine learning (ML) has recently come into application in heavy metals purification from wastewater, especially in exploring lead removal by biochar that prepared using tube furnace (TF-C) and fluidized bed (FB-C) pyrolysis methods. In this study, six ML models including Random Forest Regression (RFR), Gradient Boosting Regression (GBR), Support Vector Regression (SVR), Kernel Ridge Regression (KRR), Extreme Gradient Boosting (XGB), and Light Gradient Boosting Machine (LGBM) were employed to predict lead adsorption based on a dataset of 1012 adsorption experiments, comprising 422 TF-C groups from our experiments and 590 FB-C groups from literatures. The XGB model showed superior accuracy and predictive performance for adsorption, achieving R2 values for TF-C (0.992) and FB-C (0.981), respectively. Contrasting inferior results were observed in other models, including RF (0.962 and 0.961), GBR (0.987 and 0.975), SVR (0.839 and 0.763), KRR (0.817 and 0.881), and LGBM (0.975 and 0.868). Additionally, a hybrid dataset combining both biochars in Pb adsorption also indicated high accuracy (0.972) as obtained from XGB model. The investigation revealed that the influence of char characteristics and adsorption conditions on Pb adsorption differs between the two biochar. Specific char characteristics, particularly nitrogen content, significantly influence lead adsorption in both biochar. Interestingly, the influence of pyrolysis temperature (PT) on lead adsorption is found to be greater for TF-C than for FB-C. Consequently, careful consideration of PT is crucial when preparing TF-C biochar. These findings offer practical guidance for optimizing biochar preparation conditions during heavy metal removal from wastewater.

A review: Hydrochar as potential adsorbents for wastewater treatment and CO2 adsorption

To valorize the biomass and organic waste, hydrothermal carbonization (HTC) stands out as a highly efficient and promising pathway given its intrinsic advantages over other thermochemical processes. Hydrochar, as the main product obtained from HTC, is widely applied as a fuel source and soil conditioner. Aside from these applications, hydrochar can be either directly used or modified as bio-adsorbents for environmental remediation. This potential arises from its tunable surface chemistry and its suitability to act as a precursor for activated or engineered carbon. In view of the importance of this topic, this review offers a thorough examination of the research progress for using hydrochar and its modified forms to remove organic dyes (cationic and anionic dyes), heavy metals, herbicides/pesticides, pharmaceuticals, and CO2. The review also sheds light on the fundamental chemistry involved in HTC of biomass and the major analytical techniques applied for understanding surface chemistry of hydrochar and modified hydrochar. The knowledge gaps and potential hurdles are identified to highlight the challenges and prospects of this research field with a summary of the key findings from this review. Overall, this article provides valuable insights and directives and pinpoints the areas meriting further investigation in the application potential of hydrochar in wastewater management and CO2 capture.

Rapid and efficient removal of multiple heavy metals from diverse types of water using magnetic biochars derived from antibiotic fermentation residue

Pyrolysis is a promising method to treat antibiotic fermentation residue (AFR), a hazardous waste in China, with the benefits of detoxification and resource recycling. However, the application of the AFR-derived biochar has been limited yet, restricting the use of pyrolysis to treat AFR. Herein, for the first time, we reported the use of magnetic biochars derived from vancomycin fermentation residue to rapidly and efficiently co-adsorb multiple heavy metals from diverse types of water with complex matrices. The biochar prepared at 700 °C (labeled as VBC700) exhibited high affinity and selectivity for multiple heavy metals, especially for Ag(I), Hg(II), Pb(II), and Cu(II). The kinetics for Ag(I), Hg(II), and Pb(II) were ultrafast with an equilibrium time of only 5 min, while those for Cu(II) were relatively slower. The maximum adsorption capacity calculated from the Langmuir model for Ag(I), Hg(II), Pb(II), and Cu(II) reached 177.4, 105.9, 387.1, 124.5 mg/g, respectively, which were superior to much previously reported adsorbents. Impressively, Na(I), K(I), Ca(II), Mg(II), and salinity did not affect the capture of these heavy metals, and thus >99% of Ag(I), Pb(II), and Cu(II) were concurrently removed from complex water matrices including seawater, which has rarely been reported before. Furthermore, VBC700 remained high adsorption performance at pH ≥ 3. The adsorption mechanisms included ion exchange, precipitation, and inner-sphere complexation. Overall, the results demonstrate that VBC700 would be an excellent adsorbent to co-capture multiple heavy metals from diverse types of water, highlighting the feasibility of using pyrolysis to achieve a win-win goal for AFR management and heavy metal pollution control.

Synthesis, Characterization, and Biosorption of Cu2+ and Pb2+ Ions from an Aqueous Solution Using Biochar Derived from Orange Peels

In this study, orange peel (OP) biochar was used as a bio-sorbent for the removal of copper and lead from wastewater in single and binary systems. The equilibrium and kinetic studies were conducted at a pH value of 5, which was the maximum adsorption pH value for both metal ions. The equilibrium studies were investigated at a varying initial concentration (10-200 mg/L) with a constant dosage of 0.1 g, while the kinetic studies were conducted at a fixed initial concentration of 200 mg/L with a constant dosage of 1 g/L for both single and binary systems. The maximum adsorption capacity of the orange peel biochar was 28.06 mg/g, 26.83 mg/g, 30.12 mg/g and 27.71 mg/g for single Cu2+, binary Cu2+, single Pb2+ and binary Pb2+ systems, respectively. The Langmuir isotherm model fitted the experimental data, suggesting that adsorption occurred on a monolayer, while the pseudo-second-order model performed well with the kinetic data. The point of zero charge (pHpzc) of the orange peel biochar was found to be 10.03, which revealed that the surface of the bio-sorbent contains basic groups. A Fourier infrared transform (FTIR) spectroscope and scanning electron microscope, coupled with energy dispersive x-ray (SEM-EDX) and x-ray diffraction analyses, were used to determine the functional groups, surface morphology, and inorganic elements present on the surface of the bio-sorbent, respectively. The results obtained have shown that orange peel biochar is efficient for the removal of Cu2+ and Pb2+ ions from an aqueous solution.

N, S Co-Doped Carbons Derived from Enteromorpha prolifera by a Molten Salt Approach: Antibiotics Removal Performance and Techno-Economic Analysis

N, S co-doped bio-carbons with a hierarchical porous structure and high surface area were prepared using a molten salt method and by adopting Entermorpha prolifera (EP) as a precursor. The structure and composition of the bio-carbons could be manipulated by the salt types adopted in the molten salt assisted pyrolysis. When the carbons were used as an activating agent for peroxydisulfate (PDS) in SMX degradation in the advanced oxidation process (AOP), the removal performance in the case of KCl derived bio-carbon (EPB-K) was significantly enhanced compared with that derived from NaCl (EPB-Na). In addition, the optimized EPB-K also demonstrated a high removal rate of 99.6% in the system that used local running water in the background, which proved its excellent application potential in real water treatment. The degradation mechanism study indicated that the N, S doping sites could enhance the surface affinity with the PDS, which could then facilitate ¹O₂ generation and the oxidation of the SMX. Moreover, a detailed techno-economic assessment suggested that the price of the salt reaction medium was of great significance as it influenced the cost of the bio-carbons. In addition, although the cost of EPB-K was higher (USD 2.34 kg^-1) compared with that of EPB-Na (USD 1.72 kg^-1), it was still economically competitive with the commercial active carbons for AOP water treatment.

Magnetic biochar derived from macroalgal Sargassum hemiphyllum for highly efficient adsorption of Cu(II): Influencing factors and reusability

In this study, the brown algae Sargassum Hemiphyllum was used as a carbon source for synthesis of magnetic porous biochar via pyrolyzing at high temperature and and doping iron oxide particles (Fe-BAB). Cu (II) species were removed from aqueous solutions using Fe-BAB under various conditions. Fe-BAB demonstrated superior Cu (II) adsorption (105.3 mg g-1) compared to other biochars. On the surface of Fe-BAB, there are several oxygen-containing functional groups, such as -COOH and -OH, which are likely responsible for the excellent heavy metal removal performance. By utilizing magnet, the Fe-BAB can be conveniently separated from the solution and ready for further usage. Multi-adsorption mechanisms were responsible for Cu adsorption on Fe-BAB. Using the magnetic algal biochar for heavy metal removal is feasible due to its high adsorption efficiency and simplicity of separation.

Leaching Remediation of Dredged Marine Sediments Contaminated with Heavy Metals

There are more than 150 ports in China and a considerable proportion of dredged sediments in ports and waterways are contaminated with heavy metals as the typical contaminants. It is mandatory to remediate the contaminated dredged sediments prior to further resource utilization. The over-arching objective of this study was to use natural organic acids (oxalic acid, citric acid, tartaric acid, and malic acid) as leaching agents to remove heavy metals (Cu, Cd, and Pb) from contaminated dredged sediments. Batch experiments were conducted to investigate the factors governing the removal rate of heavy metals and leaching kinetics. Citric acid had the best leaching effect on heavy metals Cu, Cd, and Pb with an optimal leaching concentration of 20 mmol/L and a solid-to-liquid ratio of 1:20. The average removal rates of Cu, Cd, and Pb were 85%, 73%, 56%, and 35% for citric acid, malic acid, tartaric acid, and oxalic acid, respectively. The leaching kinetics showed that the removal of heavy metals increased rapidly with time and then gradually reached the maximum value which was best described by the Elovich equation model. The outcomes of this study suggest that citric acid is an effective and environmentally friendly leaching agent for removing heavy metals from marine dredged sediments.

Highly TEMPO-oxidized cellulose for removal of ionic and complexed cadmium from a complicated water system

TEMPO-NaDCC-oxidized cellulose (TNOCS) with a large surface area and an abundance of carboxyl groups was used to remove heavy metal ions (Cd, Cu, and Pb) and their organic acid complexes [HM-OAs] (OAs, i.e., citric acid (CA) and propionic acid (PA)), and then reveal their adsorption behaviors. Taking Cd and CA as examples, the results showed that some of Cd ions were first adsorbed onto TNOCS, and then, the existence of [Cd-CA^-] complexes formed a coordinated structure with preloaded Cd ions to serve as a bridge for combining TNOCS and [Cd-CA]. The maximum adsorption capacities of TNOCS for Cd and Cd-CA were 16.50 and 22.15 mg/g, respectively. Moreover, adsorption energies and molecular orbital distributions indicated that the adsorption capacity of TNOCS for [Cd-CA] was better than that for Cd alone. TNOCS can maintain greater than 90% adsorption capacity in five times regeneration experiments using EDTA, indicating that it is very efficient and stable. In addition, the electron density, deformation charge, and Mulliken charge distribution were confirmed that the electron transfer direction was from carboxyl groups to cadmium, whether it was cadmium ions or complexed cadmium.

Feasibility of Remediation of Heavy-Metal-Contaminated Marine Dredged Sediments by Active Capping with Enteromorpha Biochar

Enteromorpha biochar (BC) has been proposed as a potential absorbent in the marine environments. This study attempts to understand the process of active capping using Enteromorpha BC to prevent the release of heavy metals (Pb and Cd) from contaminated marine dredged sediments. The capping efficiency was assessed with a series of lab-scale column experiments. Results showed that the Enteromorpha BC exhibits rough pore structure and higher specific surface area, as well as more surface organic functional groups, which is favorable for its adsorption capacity and selectivity towards heavy metals. The capping thickness of 2 cm for Enteromorpha BC was sufficient to prevent the release of heavy metals from sediments, with the capping efficiency of 47% for Pb and 62% for Cd. Kinetic studies showed that heavy metals released into the overlying water can be described by a three-parameter sigmoidal kinetic model. Importantly, the fractions of heavy metals in the dredged sediments below the capping layer were analyzed to reveal the capping remediation mechanism. The outcomes of the present study indicate that capping with Enteromorpha BC is a promising method to regulate the water environment by preventing the release of heavy metals from the contaminated dredged sediments.

Effects of competitive adsorption with Ni(II) and Cu(II) on the adsorption of Cd(II) by modified biochar co-aged with acidic soil

To investigate the effects of competitive adsorption with Ni(II) and Cu(II) on the adsorption of Cd(II) by modified biochar co-aged with acidic soil, four biochars were employed in this study, namely original biochar, KMnO₄-modified biochar and two aged biochars which co-aged with an acidic soil using above biochars under freeze-thaw cycling and dry-wet cycling for 54 days simulating 6 years of natural aging. The results showed that biochar adsorption capacities of three heavy metal ions were in the order of Cd(II) > Cu(II) > Ni(II) in the single system while Cu(II) > Cd(II) > Ni(II) in binary and ternary systems. Modification improved biochar adsorption capacity of Cd(II), but competitive adsorption with Ni(II) and Cu(II) weakened the improvement of modification on adsorption performance of modified biochar in binary and ternary systems. The Q_MBC/Q_BC of Cd(II) (Q_MBC and Q_BC are the adsorption capacities of heavy metals by modified and original biochars) decreased from 231.57% (single system) to 216.67%∼219.41% (binary system) and further decreased to 207.74% (ternary system). Co-aging with soil weakened the adsorption capacities of biochars for Cd(II), even worse, competition aggravated this negative effect of co-aging. The Q_AMBC/Q_MBC of Cd(II) (Q_AMBC is the adsorption capacities of heavy metals by aged modified biochar) decreased from 65.41% (single system) to 14.43%∼19.46% (binary and ternary systems). Therefore, the impact of competition should be fully considered when evaluating Cd long-term remediation effects of modified biochar in Cd polluted soils accompanied with other heavy metals.

Seaweed’s Role in Energetic Transition—From Environmental Pollution Challenges to Enhanced Electrochemical Devices

Simple Summary

Earth is currently facing the effects of climate change in all environmental ecosystems; this, together with pollution, is the cause of species extinction and biodiversity loss. Thus, it is vital to take actions to mitigate and decrease the release of greenhouse gases to the atmosphere. The emergence of energetic transition from fossil fuels to greener energies is clearly defined in the United Nations 2030 agenda. Although this transition endorses the ambitious goal to supply greener energy for all developed societies, the increased demand for the minerals essential to develop cleaner energetic technologies has highlighted several economic and environmental issues. Currently, these minerals are mainly obtained by mining activities that generate high levels of soil and water pollution, coupled with the intensive use of water and hazardous gas release. On the other hand, the exponential increase of electronic waste derived from end-of-life electronic equipment is already raising environmental concerns due to heavy metal contamination as a result of their disposal. Thus, it is vital to develop sustainable and efficient strategies to mitigate energetic transition environmental footprints. This review highlights the use of seaweed biomass for toxic mineral bioremediation, recycling, and as an alternative material for greener energy-storage device development.

Abstract

Resulting from the growing human population and the long dependency on fossil-based energies, the planet is facing a critical rise in global temperature, which is affecting all ecosystem networks. With a growing consciousness this issue, the EU has defined several strategies towards environment sustainability, where biodiversity restoration and preservation, pollution reduction, circular economy, and energetic transition are paramount issues. To achieve the ambitious goal of becoming climate-neutral by 2050, it is vital to mitigate the environmental footprint of the energetic transition, namely heavy metal pollution resulting from mining and processing of raw materials and from electronic waste disposal. Additionally, it is vital to find alternative materials to enhance the efficiency of energy storage devices. This review addresses the environmental challenges associated with energetic transition, with particular emphasis on the emergence of new alternative materials for the development of cleaner energy technologies and on the environmental impacts of mitigation strategies. We compile the most recent advances on natural sources, particularly seaweed, with regard to their use in metal recycling, bioremediation, and as valuable biomass to produce biochar for electrochemical applications.

Biochar as environmental armour and its diverse role towards protecting soil, water and air

Biochar has been of considerable importance for various environmental applications in recent years. It has exhibited substantial advantages like favourable structural and surface properties, easy process of preparation and widely available feedstocks. These set of exceptional properties make it an efficient, cost-effective and environment friendly source for diversified elimination of pollutants. The heterogeneity of physico-chemical properties offers a possibility for biochar to optimize its efficacy for targeted applications. This review aims to highlight the critical role that biochar plays in various environmental applications, be it in soil, water or air. In particular the article offers a comprehensive review of the recent research findings and updates related to the diversified role of biochar. Also, the interaction of pollutants with biochar functional groups and the impact of variation of parameters on biochar attribute relevant to specific pollutant removal, modifications, mechanisms involved and competence for such removal has been discussed. Different technologies for production of biochar have also been summarized with an emphasis on post treatment of biochar, such as modification and doping. In addition to this, the underlying gaps in the studies carried out so far and recommendations for future research areas in biochar have also been deliberated.

Removal of copper from sulfate solutions using biochar derived from crab processing by-product

Increasing metal demand is accelerating the mining and processing of minerals, however to ensure sustainable growth innovative approaches are required to better manage associated effluents. Biochar from the fast pyrolysis of residues from fishery and forestry operations has been studied as a low-cost, environmentally and economically friendly method for treating mine tailings and processing effluents. However, the bulk of the studies focus on terrestrial biomass (e.g. wood) and do not include potential inhibition/enhancement of adsorption due to pH controlling compounds. In this work biochar generated from snow crab (Chionoecetes Opilio) processing was studied as an adsorbent for copper solutions containing sulfate (a key compound in sulfide ore mining waters) with the objective of assessing adsorption capacity and the impact of sulfate on copper adsorption. The biochar, a porous structure comprised of calcite (CaCO₃), was alkaline and has a negative zeta potential under neutral and basic conditions. The crab biochar removed over 99% of Cu²⁺ from a 100 mg/L solution (sourced as CuSO₄) at a dosage of 5 g/L, which was higher than lignocellulosic biochar at the same biochar dosage. While metal adsorption can often be impacted at acidic conditions, Cu²⁺ adsorption was not impacted by initial acidic pH due to the biochar's buffering capacity. The Pseudo-Second Order (PSO) model fit the adsorption rate with maximum adsorption achieved in approximately 2 h. The maximum adsorption isotherm capacity was 184.8 ± 10.2 mg/g for Cu²⁺, much higher than existing commercial activated carbons and previously studied lignocellulosic biochars and followed the Freundlich isotherm. The adsorption mechanism responsible for removal of Cu²⁺ was found to be precipitation, in the form of the mineral posnjakite (Cu₄[(OH)₆SO₄]·H₂O). These results indicate for the first time that crab-based biochars are capable of adsorbing large quantities of Cu²⁺ from sulfate-rich solution, while also buffering solution pH, demonstrating promise as an acid mine drainage treatment for removal of harmful metals and reduction of acidity.

A review on adsorptive separation of toxic metals from aquatic system using biochar produced from agro-waste

Water is a basic and significant asset for living beings. Water assets are progressively diminishing due to huge populace development, industrial activities, urbanization and rural exercises. Few heavy metals include zinc, copper, lead, nickel, cadmium and so forth can easily transfer into the water system either direct or indirect activities of electroplating, mining, tannery, painting, fertilizer industries and so forth. The different treatment techniques have been utilized to eliminate the heavy metals from aquatic system, which includes coagulation/flocculation, precipitation, membrane filtration, oxidation, flotation, ion exchange, photo catalysis and adsorption. The adsorption technique is a better option than other techniques because it can eliminate heavy metals even at lower metal ions concentration, simplicity and better regeneration behavior. Agricultural wastes are low-cost biosorbent and typically containing cellulose have the ability to absorb a variety of contaminants. It is important to note that almost all agro wastes are no longer used in their original form but are instead processed in a variety of techniques to improve the adsorption capacity of the substance. The wide range of adsorption capacities for agro waste materials were observed and almost more than 99% removal of toxic pollutants from aquatic systems were achieved using modified agro-waste materials. The present review aims at the water pollution due to heavy metals, as well as various heavy metal removal treatment procedures. The primary objectives of this research is to include an overview of adsorption and various agriculture based adsorbents and its comparison in heavy metal removal.

Humulus scandens-Derived Biochars for the Effective Removal of Heavy Metal Ions: Isotherm/Kinetic Study, Column Adsorption and Mechanism Investigation

Humulus scandens was first adopted as a biomass precursor to prepare biochars by means of a facile molten salt method. The optimized biochar exhibits a high specific surface area of ~450 m²/g, a rich porous structure and abundant oxygen functional groups, which demonstrate excellent adsorption performance for heavy metal ions. The isotherm curves fit well with the Langmuir models, indicating that the process is governed by the chemical adsorption, and that the maximum adsorption capacity can reach 748 and 221 mg/g for Pb²⁺ and Cu²⁺, respectively. In addition, the optimized biochar demonstrates good anti-interference ability and outstanding removal efficiency for Cu²⁺ and Pb²⁺ in simulated wastewater. The mechanism investigation and DFT calculation suggest that the oxygen functional groups play dominant roles in the adsorption process by enhancing the binding energy towards the heavy metal ions. Meanwhile, ion exchange also serves as the main reason for the effective removal.

Activation of biochar through exoenzymes prompted by earthworms for vermibiochar production: A viable resource recovery option for heavy metal contaminated soils and water

The industrial revolution and indiscriminate usage of a wide spectrum of agrochemicals account for the dumping of heavy metals in the environment. In-situ/ex-situ physical, chemical, and bioremediation strategies with pros and cons have been adopted for recovering metal contaminated soils and water. Therefore, there is an urgent requirement for a cost-effective and environment-friendly technique to combat metal pollution. Biochar combined with earthworms and vermifiltration is a suitable emerging technique for the remediation of metal-polluted soils and water. The chemical substances (e.g., sodium hydroxide, zinc chloride, potassium hydroxide, and phosphoric acid) have been used to activate biochar, which also faces several shortcomings. Studies reveal that extracellular enzymes have been used to activate biochar which is produced by earthworms and microbes that can alter the surface of the biochar. The present review focuses on the global scenario of metal pollution and its remediation through biochar activation using earthworms. The earthworms and biochar can produce "vermibiochar" which is capable of reducing the metal ions from contaminated water and soils. The vermifiltration can be a suitable technology for metal removal from wastewater/effluent. Thus, the biochar has a trick of producing entirely new options at a time when vermifiltration and other technologies are least expected. Further attention to the biochar-assisted vermifiltration of different sources of wastewater is required to be explored for the large-scale utilization of the process.

Hydrous manganese dioxide modified poly(sodium acrylate) hydrogel composite as a novel adsorbent for enhanced removal of tetracycline and lead from water

In this study, hydrous manganese dioxide (HMO) modified poly(sodium acrylate) (PSA) hydrogel was produced for the first time to remove tetracycline(TC) and lead(Pb(II)) from water. The as-prepared composite was characterized using various techniques, such as SEM-EDS, FTIR, XRD, BET, and XPS, to elucidate the successful loading of HMO and analyze subsequent sorption mechanisms. Different influencing parameters such as adsorbent dose, initial concentration of adsorbates, reaction time, solution pH, and temperature were also investigated. The adsorption kinetic studies of both TC and Pb(II) removal indicated that equilibrium was achieved within 12 h, with respective removal rates of 91.9 and 99.5%, and the corresponding adsorption data were fitted to the second-order kinetics model. According to the adsorption isotherm studies, the sorption data of TC best fitted to the Langmuir isotherm model while the adsorption data of Pb(II) were explained by the Freundlich isotherm model. The maximum adsorption capacities of both TC and Pb(II) were found to be 475.8 and 288.7 mg/g, respectively, demonstrating excellent performances of the adsorbent. The uptake capacity of PSA-HMO was significantly influenced by the level of solution pH, in which optimum adsorption amount was realized at pH 4.0 in the TC and Pb(II) systems, respectively. Thermodynamic studies showed the process of TC and Pb(II) adsorptions were endothermic and spontaneous. Overall this study elucidated that PSA-HMO composite can be a promising candidate for antibiotics and heavy metal removal in water treatment applications.

Adsorption of copper (II) in aqueous solution using biochars derived from Ascophyllum nodosum seaweed

There has been growing research interest in exploiting biochar for cost-effective. removal of different pollutants. Heavy metals, especially copper II (Cu II) is highly toxic and nonbiodegradable pollutants, and has been major source of environmental pollution. In this study adsorption of Cu (II) on seaweed (Ascophyllum nodosum)-derived biochar was systematically examined. The removal efficiency based on surface property of biochar and type of interactions associated with biochar produced at varying pyrolysis conditions were investigated. The highest removal efficiency of Cu (II) from aqueous media was >99% with 223 mg g-1 Cu (II) adsorption capacity observed by biochar derived at 700 °C and pH 5. Langmuir adsorption isotherm described the adsorption mechanisms of Cu (II) on biochar with cationic and anionic electrostatic attractions, surface precipitation, and pore depositions. Thus, this study shows that waste biomass (seaweed) could be a valuable bioresource for heavy metal remediation from various water bodies.

Adsorptive separation of toxic metals from aquatic environment using agro waste biochar: Application in electroplating industrial wastewater

In this research, raw jujube seeds (RJS) treated with sulphuric acid followed by ultrasonic treatment such as ultrasonic assisted jujube seeds (UAJS) based biochar have been experimented as a viable material for treating Zn(II) and Pb(II) contaminated water. The adsorption ability of UAJS was compared with RJS through Langmuir adsorption capacity. The produced adsorbents were analysed by using BET surface area and thermogravimetric analyses. The removal kinetics, isotherms and thermodynamic behaviours of metal ions adsorption by UAJS were studied. Adsorption equilibrium data were analysed using various equilibrium models and Freundlich isotherm was appropriate towards explain the adsorption characteristics. UAJS Langmuir capacity of 221.1 mg/g and 119.8 mg/g were obtained for Zn(II) ions and Pb(II) ions, respectively. The results observed that UAJS holds higher capacity as compared with RJS. The pseudo-first order model was relevant to address adsorption behaviour. The mechanism on the separation of metal ions by UAJS was tested using diffusion and Boyd models. The mechanism outcomes observed that the internal and external diffusion controlled the separation process. The thermodynamic results explain the separation process was viable, exothermic and natural. The electroplating industrial wastewater was also treated with UAJS biochar to remove the metal ions such as copper, nickel, chromium and zinc ions from wastewater. Desorption process showed that 0.1 N HCl provide the good results as compared with other desorbing agents. The adsorbent property is not lost till the maximum of 5 adsorption/desorption cycles. The produced UAJS can be a better adsorbent for treating the heavy metal polluted wastewater.

Review on sustainable production of biochar through hydrothermal liquefaction: Physico-chemical properties and applications

This review examines in detail the production and characteristics of biochar resulting from hydrothermal liquefaction. Specifically, the impact of feedstocks and different process parameters on the properties and yield of biochar by hydrothermal liquefaction has been thoroughly studied. Hydrothermal liquefaction derived biochars, relative to biochars from high-temperature thermochemical processes retain critical functional groups during carbonization and are therefore promising for a wide range of applications. Most of the review's efforts are to study possible hydrothermal liquefaction biochar applications in various fields, including fuel, metal and dye adsorption, pollutant reduction, animal feed, and biogas catalyst. The feasibility of biochar through the hydrothermal liquefaction process has been analysed via life-cycle assessment and energy evaluation. The article concludes with a brief discussion on possible issues and strategies for the sustainable development of hydrothermal liquefaction-based biochar.

Facile Synthesis of Cauliflower Leaves Biochar at Low Temperature in the Air Atmosphere for Cu(II) and Pb(II) Removal from Water

In this study, a facile and low-cost method for biochar (CLB) preparation from vegetable waste (cauliflower leaves) was developed at a low temperature (120 °C) in the air atmosphere. The prepared mechanism, adsorption mechanism, and performance of CLB for Cu(II) and Pb(II) sorption were investigated using Scanning electron microscopy- energy dispersive X-ray spectroscopy(SEM-EDS), X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), and a series of sorption experiments. Then the CLB was subjected to single and double element sorption studies to examine the effect of pH value on the Cu(II)/Pb(II) sorption capacities and then competitive sorption priority. There are both more hydroxyl (–OH) and carboxyl (–COOH) functional groups on the surface of CLB compared to those from control (without H₃PO₄ impregnation), resulting in more ion exchanges and complexation reaction for CLB with Cu(II) and Pb(II). Besides, the phosphorus-containing groups (e.g., P = OOH, P = O.), which newly formed with H₃PO₄ impregnation, could also enhance sorption, especially for Pb(II), this way leaded to its adsorption and precipitation as Pb₅(PO₄)₃OH crystals. The performance of maximum adsorption capacities of CLB toward Cu(II) and Pb(II) were 81.43 and 224.60 mg/g, respectively. This sorption was slightly pH-dependent, except that the sorption capacity improved significantly as the pH value of the solution increased from 2 to 4. Competitive sorption experiment confirmed that Pb(II) had a higher sorption priority than Cu(II).

One-step green preparation of magnetic seaweed biochar/sulfidated Fe0 composite with strengthen adsorptive removal of tetrabromobisphenol A through in situ reduction

Rare information is available on the facile preparation of biochar/sulfidated Fe⁰ composite. A facile one-step green method was established for the synthesis of magnetic seaweed (Ulva prolifera) biochar/sulfidated Fe⁰ composite (S-Fe⁰/BC) to use excessive seaweed biomass. Removal efficiency of tetrabromobisphenol A (TBBPA) reached up to 88% in iron-sulfur treatment. Two major products were identified as bisphenol A and monobromobisphenol A, confirming the in-situ reductive debromination of TBBPA. Batch experiments showed that the removal of TBBPA was facilitated with S/Fe molar ratio of 0.2 and acidic conditions (pH = 3-7). The S-Fe⁰/BC composite had good stability and reusability based on the cycle experiments. The removal process of TBBPA by S-Fe⁰/BC composite might include chemical adsorption by S-Fe⁰/BC composite, reduction debromination by S-Fe⁰ and enhanced electron transfer. The environmentally-friendly S-Fe⁰/BC composite synthesized by one-step facile procedure showed novel potential applications in terms of pollution control of halogenated xenobiotic compounds such as TBBPA.

Biochar for Wastewater Treatment—Conversion Technologies and Applications

Biochar as a stable carbon-rich material shows incredible potential to handle water/wastewater contaminants. Its application is gaining increasing interest due to the availability of feedstock, the simplicity of the preparation methods, and their enhanced physico-chemical properties. The efficacy of biochar to remove organic and inorganic pollutants depends on its surface area, pore size distribution, surface functional groups, and the size of the molecules to be removed, while the physical architecture and surface properties of biochar depend on the nature of feedstock and the preparation method/conditions. For instance, pyrolysis at high temperatures generally produces hydrophobic biochars with higher surface area and micropore volume, allowing it to be more suitable for organic contaminants sorption, whereas biochars produced at low temperatures own smaller pore size, lower surface area, and higher oxygen-containing functional groups and are more suitable to remove inorganic contaminants. In the field of water/wastewater treatment, biochar can have extensive application prospects. Biochar have been widely used as an additive/support media during anaerobic digestion and as filter media for the removal of suspended matter, heavy metals and pathogens. Biochar was also tested for its efficiency as a support-based catalyst for the degradation of dyes and recalcitrant contaminants. The current review discusses on the different methods for biochar production and provides an overview of current applications of biochar in wastewater treatment.

Competitive adsorption behaviour and mechanisms of cadmium, nickel and ammonium from aqueous solution by fresh and ageing rice straw biochars

In this study, competitive adsorption behaviour and mechanisms of Cd²⁺, Ni²⁺ and NH₄⁺ by fresh and artificially ageing biochars produced from rice straw at 400 and 700 °C (RB400, RB700, HRB400 and HRB700) were investigated. Cd²⁺ competed with Ni²⁺ and NH₄⁺ for the overlapped adsorption sites on the biochars. For Cd²⁺ and Ni²⁺ adsorption, cation exchange (Q_ci) and mineral co-precipitation (Q_cp) were the primary mechanisms for the low-temperature and high-temperature biochars, respectively. However, the other potential mechanisms (Q_co) made the greatest contributions to NH₄⁺ adsorption (>60%). Cd²⁺ and Ni²⁺ competition increased the proportions of mineral co-precipitation (Q_cp) and other potential mechanisms (Q_co) but decreased that of cation exchange (Q_ci) mechanism. Biochar ageing increased the contribution of surface complexation (Q_cf) mechanism, especially for the low-temperature biochars. This study indicated that biochar aging and types and states of adsorbates should be considered when biochars were applied to remove contaminants.

Eco-Friendly Sustainable Fluorescent Carbon Dots for the Adsorption of Heavy Metal Ions in Aqueous Environment

The materials and substances required for sustainable water treatment by adsorption technique, are still being researched widely by distinguished classes of researchers. Thus, the need to synthesize substances that can effectively clean up pollutants from the environment cannot be overemphasized. So far, materials in bulk forms that are rich in carbon, such as biochar and varieties of activated carbon have been used for various adsorptive purposes. The use of bulk materials for such purposes are not efficient due to minimal surface areas available for adsorption. This study explores the adsorption task at nano dimension using carbon dots (CDs) from tapioca. The properties of carbon structure and its influence on the adsorptive efficacy of carbon nanoparticles were investigated by energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), high resolution transmission electron microscopy (HrTEM), and atomic force microscopy (AFM). The results implied carbon present in CDs are good adsorbents for effective adsorption of heavy metal ions (lead) with removal efficiency of 80.6% in aqueous environment. The adsorption process as explored by both Langmuir and Freundlich isotherms have proven favorability of the adsorption process. Langmuir form two and three have correlation coefficients R2 at 0.9922 and 0.9912, respectively. The Freundlich isotherm confirms CDs as having defined surface heterogeneity and the exponential distribution of active sites. The adsorption of lead unto CDs obeyed the second order kinetic model with coefficient of determination, R2 of 0.9668 and 0.9996 at an initial lead concentration of 20 mg/L and 100 mg/L, respectively. The findings validated the efficiency of CDs derived from tapioca as an excellent material for further utilization in the environmental fields of wastewater pollution detection and clean up, bio-imaging, and chemical sensing applications.