Dual-biomimetic superwetting silica nanofibrous membrane for oily water purification

Improvement strategies for oil/water separation based on electrospun SiO2 nanofibers

Oil spills and oily effluents from industry and daily life pose a great threat to all organisms in the ecosystem, while aggravating the problem of water scarcity, which has developed into a global challenge. Therefore, the development of advanced materials and technologies for oil/water separation has become a focus of attention. One-dimensional (1D) SiO2 nanofibers (SNFs) have become one of the most widely used inorganic nanomaterials in the past due to their stable chemical properties, excellent biocompatibility, and high temperature resistance etc. Meanwhile, electrospinning technique, as an emerging technology for treating oil/water emulsions, electrospun SNFs on this basis also has a number of advantages such as adjustable wettability, diverse structure and good connectivity. This review provides a systematic overview of the research progress of electrospun SNFs in different aspects. In this review, we first introduce the basic principles of electrospun SNFs, then focus on the design structures of various SNFs, propose corresponding strategies for the property improvement of SNFs, also analyze and consider the applications of SNFs. Finally, the challenges faced by electrospun SNFs in the field of oil/water separation are analyzed, and the future directions of electrospun SNFs are summarized and prospected.

A comprehensive review on the behavior and evolution of oil droplets during oil/water separation by membranes

Membrane separation technology has significant advantages for treating oil-in-water emulsions. Understanding the evolution of oil droplets could reveal the interfacial and colloidal interactions, facilitate the design of advanced membranes, and improve the separation performances. This review on the characteristic behavior and evolution of oil droplets focuses on the advanced analytical techniques, and the subsequent fouling as well as demulsification effects during membrane separation. A detailed introduction is provided on microscopic observations and numerical simulations of the dynamic evolution of oil droplets, featuring real-time in-situ visualization and accurate reconstruction, respectively. Characteristic behaviors of these oil droplets include attachment, pinning, wetting, spreading, blockage, intrusion, coalescence, and detachment, which have been quantified by specific proposed parameters and criteria. The fouling process can be evaluated using Hermia and resistance models. The related adhesion force and intrusion pressure as well as droplet-droplet/membrane interfacial interactions can be accurately quantified using various force analysis methods and advanced force measurement techniques. It is encouraging to note that oil coalescence has been achieved through various effects such as electrostatic interactions, mechanical actions, Laplace pressure/surface free energy gradients, and synergistic effects on functional membranes. When oil droplets become destabilized and coalesce into larger ones, the functional membranes can overcome the limitations of size-sieving effect to attain higher separation efficiency. This not only bypasses the trade-off between permeability and rejection, but also significantly reduces membrane fouling. Finally, the challenges and potential research directions in membrane separation are proposed. We hope this review will support the engineering of advanced materials for oil/water separation and research on interface science in general.

Robust bioinspired surfaces and their exploitation for petroleum hydrocarbon remediation

The current improvement in science and engineering, actively dealing with surfaces and interfaces, turns into a functioning control with a thriving advancement propensity. Superlyophobic/superlyophilic phenomena in surface sciences have pulled in broad considerations of researchers and specialists. Inspired by the natural and living organism, researchers have designed different biomimetic materials with exceptional surface wettability, such as the smart wetting of asymmetric spider silk surfaces. These smart materials with superlyophobic/superlyophilic wettability are generally utilized for water assortment, self-cleaning, fluid transportation and separation, and many researchers' domains. Among them, emulsion separation, including division of oil-water blend, mixtures of immiscible liquids and oil-water emulsions, is highlighted by an increasing number of researchers. Numerous materials with one- and two-dimensional morphology, smart surfaces, and super wettability have been effectively designed and utilized in various scientific research applications. We expect that these bioinspired materials with super wettability can have promising applications in practical for emulsion destabilization and liquid transportation.

Facile ultrasonic preparation of a polypyrrole membrane as an absorbent for efficient oil-water separation and as an antimicrobial agent

Polypyrrole (PPY) spherical particles synthesized using carbon dots as an efficient catalyst were strongly embedded on fluorinated nonwoven fabric by ultrasonication to form a membrane with high hydrophilicity. An optimal amount of PPY adhered to the membrane after 30 min of sonication enhanced the overall membrane area with high hydrophilicity. Oil with high hydrophobicity was repelled by the resulting membrane, whereas water was freely penetrated and diffused from the membrane. The membrane exhibited good reusability and efficiency for the recovery of oil from a cooking oil-water mixture within 30 s. The incorporation of PPY in the fluorinated fabric imparts significant antibacterial properties against two common pathogens, Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive). The anti-biofouling membrane could pave the way for its potential application to separate spilled oil from contaminated waters, comprising different microorganisms and living species. The novelty of this manuscript is described in a new system, the fabrication of PPY membranes with two important properties: biocidal and oil/water separation.

Designing nanofibrous membrane with biomimetic caterpillar-like structured for highly-efficient and simultaneous removal of insoluble emulsified oils and soluble dyes towards sewage remediation

Purification of insoluble emulsified oils and soluble organic pollutants from sewage has attracted tremendous attention in today's society. Herein, a stable and environmentally friendly nanofibrous membrane with hierarchical caterpillar-like structure was fabricated via in-situ hydrothermal growing the nickel-cobalt layered double hydroxides (NiCo-LDHs) on tche polyacrylonitrile (PAN) electrospun nanofibers. The wrapped hydrophilic NiCo-LDHs constructed the hierarchical structure and endowed the membrane attractive superhydrophilicity (≈ 0°)/underwater superoleophobicity (≈ 161°) and enhanced oil-repellency performance. Meanwhile, the NiCo-LDH@PANI/oPAN NFMs can display the ultra-fast flux of SSEs (xylene/water emulsion, 4175 L m^-2 h^-1) and satisfactory separation efficiency (99.07%). Moreover, the introduction of positively charged NiCo-LDHs increased plentiful adsorption active sites for membranes, which is beneficial to demulsify ionic SSEs and adsorb organic pollutants. Finally, for simultaneous purification of complex sewage by the dead-end and cross-flow filtration experiment, the composite membrane both displayed splendid removal rate of oil (> 99.0%) and dyes (> 99.0%), robust regeneration recycle-ability and no secondary pollution. Hence, it is expected that such strategy of combining electrospun and chelating-assisted in-situ hydrothermal can provide a low energy consumption and high decontamination technology for severe environmental crisis.

Multifunctional filtration membrane with anti-viscous-oils-fouling capacity and selective dyes adsorption ability for complex wastewater remediation

Multifunctional filtration membranes (MFMs), which can both effectively separate oil and selectively remove dyes from polluted aquatic system with robust anti-viscous-oil-fouling capacity, strong chemical/physical resistance, and long cycled stability, are highly required but still a challenge to be realized. Herein, a simple route has been demonstrated to address this challenge aforementioned by decorating both halloysite nanotubes (HNTs) and zwitterionic poly (sulfobetaine methyl methacrylate) (PSBMA) on the microporous polyvinylidene fluoride (PVDF) membrane surface via modified polydopamine (PDA) coating route. The as-prepared membrane exhibits super-hydrophilic/underwater super-oleophobic performance and high water permeation flux (32529 ± 278 L m^-2 h^-1 at 0.85 bar) to purify the diverse viscous oil-in-water emulsions from oily wastewater accompanying with good cycled stability (the recovery rate of permeate flux is close to 100% after 5 cycles). Moreover, the as-prepared MFM possesses not only strong chemical resistance under wide range of pH value (from 1 to 12) and high saline (NaCl: 10 wt%) environment, but also physical resistance against ultrasound bath for 30 min. Given the presence of HNTs, PDA, and PSBMA, our MFM shows enough active sites to adsorb the soluble dyes and metallic ions in wastewater. These excellent properties endow our MFM with great potential for the remediation of complex wastewater.

Dual-functional membrane decorated with flower-like metal-organic frameworks for highly efficient removal of insoluble emulsified oils and soluble dyes

High-performance membranes for simultaneously removing insoluble emulsified oils and soluble organic dyes are in urgently demand for industrial wastewater treatment, but are strictly limited by the single-function and serious fouling problem. Herein, a dual-functional membrane with excellent antifouling ability for efficiently dye/oil/water emulsion separation has been fabricated by growing flower-like metal-organic frameworks (MIL-53-OH) on polyacrylonitrile/polyethyleneimine membrane for the first time. The synergistic effect of the hierarchical flower-like structure and superhydrophilic compositions with high hydration ability endows the obtained membrane with a stable and ultra-strong oil-repelling hydration layer, thus imparting the membrane formidable oil resistance and exceptional oil/water emulsion separation performance (permeate flux>4000 L m^-2 h^-1). What's more, the superhydrophilic compositions render the membrane an excellent dye remove capacity by electrostatic forces and hydrogen bonding. The membrane rejections for dyes and emulsified oils are above 99%, and the dyes and oils on the used membrane can be easily washed away with methanol and water, respectively, confirming that the membrane has desirable recyclability. Besides, the membrane possesses excellent mechanical performance and outstanding acid and alkali resistance, indicating that the membrane is a promising candidate for removing insoluble emulsified oils and soluble dyes.

Bioinspired superwetting fibrous skin with hierarchical roughness for efficient oily water separation

Developing superwetting membranes with interconnected pore and multi-scale roughness for efficient oily water separation is significant but challenging owing to the limitations of low water flux and membrane fouling. Herein, we report a scalable method to develop superwetting membranes with superhydrophilicity and underwater superoleophobicity for oily water separation. This novel approach, composed of electrospinning/electrospraying of polyacrylonitrile (PAN), was to fabricate rough sphere membrane substrate, followed by in-situ polymerization of dopamine/polyethyleneimine (DA/PEI) to positively charge the fiber skin and then subsequent immersed into the negatively charged Ludox solution to construct rough membrane surface via electrostatic attraction. Benefiting from the rough sphere surface of the fibrous skin layer, the resultant membrane displayed micro/nanostructured surfaces with intriguing in-air superhydrophilicity of 0° and underwater superoleophobicity of 166° as well as robust oil-proof pressure of 83.55 kPa. As a proof-of-concept, the resultant membrane achieved high water flux and oil rejection efficiency as well as fantastic durability and antifouling performance toward the separation of highly emulsified oily water. The integration of electrospinning/electrospraying with bioinspired method is also expected to fabricate superwetting sphere surface membrane with interconnected pores for other selective separation applications.

Membrane processes

This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.

One-step electrospinning cellulose nanofibers with superhydrophilicity and superoleophobicity underwater for high-efficiency oil-water separation

Cellulose nanofibers have been widely applied in many fields because of its unique advantages. However, it is a challenge to prepare cellulose nanofibers by electrospinning directly owing to the special molecular structure of cellulose. This limits the practical applications of cellulose nanofibers. In this work, cellulose nanofibers were successfully prepared directly by design of new electrospinning receiving device and optimization of process parameters. The as-prepared cellulose nanofibers exhibit good oil-water separation performances. Driven solely by gravity, the separation flux of the cellulose nanofibers for mixture of oil and water reaches 34,300.6 L m^-2 h^-1, and the separation flux and efficiency for surfactant-stabilized emulsion of oil and water reach 2503.7 L m^-2 h^-1 and over 98.3%, respectively. The as-prepared cellulose nanofibers also exhibit good mechanical properties and reusability. The breaking strength of the cellulose nanofibers can reach 148.2 cN. The separation fluxes of cellulose nanofibers for mixtures and emulsions of oil and water can be maintained 99.7% and 86.3% of the initial value after being used for 20 times. Furthermore, the as-prepared cellulose nanofibers have good degradability. These properties render as-prepared cellulose nanofibers as promising materials with potential applications in oil-water separation.