Tunable sour gas separations: Simultaneous H2S and CO2 removal from natural gas via crosslinked telechelic poly(ethylene glycol) membranes

A state-of-the-art review on capture and separation of hazardous hydrogen sulfide (H2S): Recent advances, challenges and outlook

Hydrogen sulfide (H₂S) is a flammable, corrosive and lethal gas even at low concentrations (ppm levels). Hence, the capture and removal of H₂S from various emitting sources (such as oil and gas processing facilities, natural emissions, sewage treatment plants, landfills and other industrial plants) is necessary to prevent and mitigate its adverse effects on human (causing respiratory failure and asphyxiation), environment (creating highly flammable and explosive environment), and facilities (resulting in corrosion of industrial equipment and pipelines). In this review, the state-of-the-art technologies for H₂S capture and removal are reviewed and discussed. In particular, the recent technologies for H₂S removal such as membrane, adsorption, absorption and membrane contactor are extensively reviewed. To date, adsorption using metal oxide-based sorbents is by far the most established technology in commercial scale for the fine removal of H₂S, while solvent absorption is also industrially matured for bulk removal of CO₂ and H₂S simultaneously. In addition, the strengths, limitations, technological gaps and way forward for each technology are also outlined. Furthermore, the comparison of established carbon capture technologies in simultaneous and selective removal of H₂S-CO₂ is also comprehensively discussed and presented. It was found that the existing carbon capture technologies are not adequate for the selective removal of H₂S from CO₂ due to their similar characteristics, and thus extensive research is still needed in this area.

Removal of Gaseous Hydrogen Sulfide by a FeOCl/H2O2 Wet Oxidation System

The removal of gaseous hydrogen sulfide using FeOCl/H₂O₂ was studied. The effects of the FeOCl dosage, the H₂O₂ concentration, the reaction temperature, and the gas flow rate on the removal of H₂S were investigated. The reaction products were analyzed, and the characterization of FeOCl was carried out by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and electron paramagnetic resonance spectroscopy. Furthermore, radical quenching experiments were carried out using butylated hydroxytoluene, isopropanol, and benzoquinone. It was found that the H₂S removal rate for a H₂S gas concentration of 160 ppm reached 85.6% when bubbling through 100 mL of an aqueous solution containing FeOCl (1 g/L) and H₂O₂ (0.33 mol/L) at 293 K with a flow rate of 135 mL/min. Although the dissolution of chlorine in FeOCl was found to result in reduced catalytic performance, the activity was restored after soaking the catalyst in concentrated hydrochloric acid (37%) and subsequent calcination. The mechanism of H₂S removal was also discussed, and it was found that this process was controlled by H₂S diffusion. FeOCl was found to activate H₂O₂ and produce radicals, such as ^•OH and ^•O₂ ^-, resulting in the formation of a water film rich in radicals on the FeOCl surface. Following the diffusion of H₂S into the water film, it underwent oxidation by radicals to produce SO₄ ^2-. Overall, the catalyst and the product can be effectively separated.

The State-of-the-Art Functionalized Nanomaterials for Carbon Dioxide Separation Membrane

Nanocomposite membrane (NCM) is deemed as a practical and green separation solution which has found application in various fields, due to its potential to delivery excellent separation performance economically. NCM is enabled by nanofiller, which comes in a wide range of geometries and chemical features. Despite numerous advantages offered by nanofiller incorporation, fabrication of NCM often met processing issues arising from incompatibility between inorganic nanofiller and polymeric membrane. Contemporary, functionalization of nanofiller which modify the surface properties of inorganic material using chemical agents is a viable approach and vigorously pursued to refine NCM processing and improve the odds of obtaining a defect-free high-performance membrane. This review highlights the recent progress on nanofiller functionalization employed in the fabrication of gas-separative NCMs. Apart from the different approaches used to obtain functionalized nanofiller (FN) with good dispersion in solvent and polymer matrix, this review discusses the implication of functionalization in altering the structure and chemical properties of nanofiller which favor interaction with specific gas species. These changes eventually led to the enhancement in the gas separation efficiency of NCMs. The most frequently used chemical agents are identified for each type of gas. Finally, the future perspective of gas-separative NCMs are highlighted.