Preliminary evaluation of the cadmium concentration in seawater of the Salvador City, Brazil

Sediment-bound hazardous trace metals(oid) in south-eastern drainage system of Bangladesh: First assessment on human health

Despite the beneficial aspect of a natural drainage system, increasing human-induced activities, which include urbanization and growth in industrialization, degrade the ecosystem in terms of trace metal contamination. In response, given the great importance of the south-eastern drainage system in Bangladesh, a detailed evaluation of the human health risk as well as the potential ecological risk of trace metals (Be, Cd, Co, Cr, Cu, Hg, Ni, Pb, Se, V, Zn, and As) in Karnaphuli riverbed sediment was conducted. Mean levels of the elements in mg/kg were As (5.62 ± 1.47); Se (0.84 ± 0.61); Hg (0.37 ± 0.23); Be (1.17 ± 0.49); Pb (15.62 ± 8.42); Cd (0.24 ± 0.33); Co (11.59 ± 4.49); Cr (112.75 ± 40.09); Cu (192.67 ± 49.71); V (27.49 ± 10.95); Zn (366.83 ± 62.82); Ni (75.83 ± 25.87). Pollution indicators, specifically contamination factor (CF), pollution load index (PLI), degree of contamination (Cd), enrichment factor (EF), geo-accumulation index (Igeo), and potential ecological risk index (RI), were computed to assess sediment quality. For the first observation of health risk, chronic daily intake (CDI), hazard quotient (HQ), hazard index (HI), carcinogenic risk (CR) and total carcinogenic risk (TCR) indices were calculated. According to the results, CDI values through the ingestion route of both the adult and child groups were organized in the following descending mode respectively: Zn > Cu > Cr > Ni > V > Pb > Co > As > Se > Be > Cd > Hg. The non-carcinogenic risks were generally low for all routes of exposure, except HQingestion was slightly higher for both adults and children. The calculated hazard index (HI) was, nevertheless, within the permitted range (HI < 1). Similarly, none of the metals exhibited any carcinogenic risks, as all CR values were within the 10-4-10-6 range. The need for authoritative efforts and water policy for the sake of the surrounding ecosystem and human health in the vicinity of the examined watershed is strongly felt as an outcome of this study. The purpose of this study is to protect public health by identifying trace metal sources and reducing industrial and domestic discharge into this natural drainage system.

Toxic metal pollution and ecological risk assessment in water and sediment at ship breaking sites in the Bay of Bengal Coast, Bangladesh

Quantification of four toxic metals (As, Cr, Cd, and Pb) in water and sediments at the Sitakunda ship breaking area in Bangladesh was studied. Along with this, sediment quality and ecological risk were evaluated for the metal intrusion to the study area. A total sample number of 120 (water; n = 60 and sediment; n = 60) were analyzed for both winter and summer seasons using atomic absorption spectrophotometer (AAS). The trace metal concentration in both water and sediment showed decreasing trend as follows; Cr (mean-W: 0.118 mg/L; mean-S:121.87 mg/kg) > Pb (mean-W: 0.064 mg/L; mean-S: 65.31 mg/kg) > As (mean-W: 0.03 mg/L; mean-S: 32.53 mg/kg) > Cd (mean-W: 0.004 mg/L; mean-S: 4.81 mg/kg). However, in both segments, the concentrations of the toxic metals exceeded the recommended acceptable limits. As and Cd showed significant variation (water and sediment) between the seasons, while Pb and Cr had no seasonal impact. Metal pollution index (MPI) and contamination factor (CF) was evaluated and revealed that the study area exhibited the critical score of water quality (MPI > 100). The cumulative effect of the metal concentrations was high (CI > 3). The assessed mean geoaccumulaiton index (I_geo) revealed that the study area was moderate to strongly polluted except for Cr. According to the contamination factor (CF), the sediment samples were moderate to highly contaminated by Cd, Pb, and As. Moreover, the explored range of pollution load index (PLI) in all sampling sites in the ship breaking region was from 1.75 to 3.10, suggesting that the sediment in the study area was highly polluted by heavy metals (PLI > 1). The risk index and the potential ecological risk index (PERI) suggested that the study area was at high risk due to metals pollution. Therefore, it is obligatory to maintain some crucial efforts for the betterment of the surrounding environment near the investigated sites.

Molecular and biochemical evaluation of effects of malathion, phenanthrene and cadmium on Chironomus sancticaroli (Diptera: Chironomidae) larvae

In-vitro effects of sub-lethal concentrations of malathion, phenanthrene (Phe) and cadmium (Cd) were tested on Chironomus sancticaroli larvae in acute bioassays by measuring biochemical and molecular parameters. Malathion was evaluated at 0.001, 0.0564 and 0.1006 mg L^-1; Phe at 0.0025, 1.25 and 2.44 mg L^-1; and Cd at 0.001, 3.2 and 7.4 mg L^-1. The recovery test carried out at the highest concentration of each compound showed that survival of larvae exposed to Phe ranged from 4% to 5%, while the effects of malathion and Cd were irreversible, not allowing the emergence of adults. Results showed that malathion and Cd inhibited AChE, EST-α and ES-β activities at the two highest concentrations. Phe at 0.0025, 1.25 and 2.44 mg L^-1; and Cd at 3.2 and 7.4 mg L^-1 inhibited glutathione S-transferase activity. Oxidative stress was exclusively induced by the lowest concentration of malathion considering SOD activity once CAT was unaffected by the stressors. Lipid peroxidation was registered exclusively by malathion at the two highest concentrations, and total hemoglobin content was only reduced by Cd at the two highest concentrations. The relationship among biochemical results, examined using the PCA, evidenced that malathion and Cd concentrations were clustered into two groups, while Phe only formed one group. Four hemoglobin genes of C. sancticaroli were tested for the first time in this species, with Hemoglobin-C being upregulated by malathion. The toxicity ranking was malathion > Phe > Cd, while biochemical and molecular results showed the order malathion > Cd > Phe. Our results highlight the importance of combining different markers to understand the effects of the diverse compounds in aquatic organisms.

Phytoremediation potential of Ulva ohnoi (Chlorophyta): Influence of temperature and salinity on the uptake efficiency and toxicity of cadmium

Ulva ohnoi is a green macroalga with fast growth and high rates of nitrogen and phosphorus absorption. Recently, this species has been recorded in several places with record green tide formation in some of them. Using molecular tools, we herein report the first occurrence of this species in Brazil and demonstrate its potential for phytoremediation in typical environmental concentrations of Cd (0.625-15 µg L^-1). Similarly, the effects of physicochemical parameters (salinity and temperature) on the toxicity and uptake efficiency of this species were evaluated. Molecular analysis of two sequences (1141 bp) obtained corroborates another 34 sequences for U. ohnoi obtained from GenBank. The addition of Cd in the medium affected photosynthetic parameters and reduced growth rate. U. ohnoi showed resistance to Cd when cultivated at 18 °C, S15 and 18-25 °C, S35, at concentrations between 0.625 and 2.5 μg. L^-1 of Cd; yet, positive growth rate was maintained. Dose-dependent accumulation was observed in all combinations of factors used with a maximum value of 4.20 μg Cd per gram of dry seaweed at 15 μg. L^-1 of Cd at 18 °C and S35. Maximum value of the concentration factor was 81.3 ± 1.1% of Cd added at the concentration of 0.625 μg. L^-1 to S15 and 18 °C. Our results demonstrate the potential of using U. ohnoi in the phytoremediation of Cd in saltwater or brackish water.

Successive Onset of Molecular, Cellular and Tissue-Specific Responses in Midgut Gland of Littorina littorea Exposed to Sub-Lethal Cadmium Concentrations

Cadmium (Cd) is one of the most harmful metals, being toxic to most animal species, including marine invertebrates. Among marine gastropods, the periwinkle (Littorina littorea) in particular can accumulate high amounts of Cd in its midgut gland. In this organ, the metal can elicit extensive cytological and tissue-specific alterations that may reach, depending on the intensity of Cd exposure, from reversible lesions to pathological cellular disruptions. At the same time, Littorina littorea expresses a Cd-specific metallothionein (MT) that, due to its molecular features, expectedly exerts a protective function against the adverse intracellular effects of this metal. The aim of the present study was, therefore, to assess the time course of MT induction in the periwinkle’s midgut gland on the one hand, and cellular and tissue-specific alterations in the digestive organ complex (midgut gland and digestive tract) on the other, upon exposure to sub-lethal Cd concentrations (0.25 and 1 mg Cd/L) over 21 days. Depending on the Cd concentrations applied, the beginning of alterations of the assessed parameters followed distinct concentration-dependent and time-dependent patterns, where the timeframe for the onset of the different response reactions became narrower at higher Cd concentrations compared to lower exposure concentrations.

Does a short-term exposure to cadmium chloride affects haemocyte parameters of the marine gastropod Haliotis tuberculata?

In this study, a model based on primary cultured haemocytes from the gastropod mollusc Haliotis tuberculata was established to investigate the effects of cadmium chloride in vitro. Cells were exposed for 24 h to CdCl2 concentrations of 0, 1 and 100 μg ml(-1). The effects of cadmium on haemocyte parameters were investigated using morphological, spectrophotometric and flow cytometry analysis. Results showed that cadmium has no significant effects on cell viability and phagocytotic activity under the tested conditions. However, haemocytes became more rounded after cadmium exposure, which could explain the significant decrease of cell area beginning at 1 μg ml(-1) of CdCl2.

Responses of primary cultured haemocytes from the marine gastropod Haliotis tuberculata under 10-day exposure to cadmium chloride

Among metals, cadmium, a non-essential element, is an important pollutant that is released into aquatic environments. Due to its persistence and bioaccumulation, this metal has been shown to exert immunological effects on organisms. The objective of the present study was to investigate the in vitro effects of cadmium chloride using a haemocyte primary culture from the European abalone, Haliotis tuberculata. Most studies have maintained viable haemocytes in vitro for periods ranging from several hours to several days during acute exposures. Few investigations have reported the effects of metals using longer in vitro exposures, which are more realistic with regard to mimicking environmental conditions. In this study, we exposed abalone haemocytes to concentrations from 0.5 to 50,000 μgL(-1) of CdCl2 for 10 days. The effects of cadmium chloride were reflected in a significant decrease in the number of viable cells and morphological modifications in a concentration-dependent manner beginning at a concentration of 500 μgL(-1) as well as in some physiological processes, such as phagocytotic activity and the number of lysosome-positive cells. In contrast, phenoloxidase (PO) activity and reactive oxygen species (ROS) production were increased beginning at a concentration of 5 μgL(-1), which is consistent with environmental concentrations in polluted sites. For PO activity and ROS production, maximally 9-fold and 130% inductions, respectively, were recorded under the highest dose. These results thus indicate that cadmium chloride alters immune parameters of abalone haemocytes and that the long-term (10 days) primary culture system used here represents a suitable, sensitive in vitro model for assessing cytotoxic responses.

Effect of cadmium in the clam Ruditapes decussatus assessed by proteomic analysis

Cadmium, an environmental stressor due to its toxicity, persistence and accumulation in biota, is widespread in the aquatic environment. Cadmium accumulation kinetics have revealed that Ruditapes decussatus has a high affinity to this metal. Proteomics is an effective tool to evaluate the toxic effects of contaminants. The aim of this study was to investigate the Cd effects in the gill and digestive gland of the sentinel species R. decussatus. Protein expression profiles (PEPs) in the clam tissues exposed to Cd (40 microg l(-1), 21 days) were compared to unexposed ones. Cd induces major changes in tissue-specific protein expression profiles in gill and digestive gland. This tissue dependent response results mainly from differences in Cd accumulation, protein inhibition and/or autophagy. An overall decrease of protein spots was detected in both treated tissues, being higher in gill. Some of the spots more drastically altered after pollutants exposure were excised and nine were identified by micro liquid chromatography tandem mass spectrometry (LC-MS/MS). Proteins identified by homology search in databases included: three proteins (8-fold) up-regulated, one down-regulated, four suppressed and one induced. Cd induces major changes in proteins involved in cytoskeletal structure maintenance (muscle-type actin, adductor muscle actin and beta-tubulin), cell maintenance (Rab GDP) and metabolism (ALDH and MCAD, both identified by de novo sequencing) suggesting potential energetic change. They provide a valuable knowledge of Cd effects at biochemical and molecular levels in the gill and digestive gland of R. decussatus.

Solid-phase extraction of Fe(III), Pb(II) and Cr(III) in environmental samples on amberlite XAD-7 and their determinations by flame atomic absorption spectrometry

This paper describes a simple and accurate procedure for preconcentration of trace amounts of Fe(III), Pb(II) and Cr(III) ions. The preconcentration procedure is based on retention of p-xylenol blue chelates on Amberlite XAD-7. The analytes retained were eluted from Amberlite XAD-7 by using 1 mol L(-1) HCl. The influences of the analytical parameters including amounts of reagents, pH and type of eluent were also investigated. The detection limits of Fe, Pb and Cr were found to be 3.07, 18.6 and 3.27 microg L(-1), respectively. The accuracy of the procedure was checked by the analysis of an electrolytic copper wire sample. The relative error was less than 5%. The presented method was applied to the determination of Fe(III), Pb(II) and Cr(III) in water samples from Denizli, Turkey with good results such as recoveries more than 95%, relative standard deviations below 10%.

On-line sorption-based systems for determination of cadmium with atomic spectrometry detectors

Determination of cadmium is often required in various environmental, biological and food samples as it is recognized worldwide as a toxic metal. However, these analysis with atomic spectrometry detectors are often difficult due to relatively low content of cadmium and complex matrices. Several preconcentration/separation procedures to determine cadmium have been devised, among them the methods based on sorbent extraction are the most popular. They can be easily implemented and controlled in flow injection (FI) or sequential injection (SI) systems to perform appropriate sample pretreatment. This work reviews the papers, published from 1990, concerning procedures based on sorption principles for on-line determination of cadmium. They were compared using experimental enhancement factor (EF) and concentration efficiency (CE) values.

An on-line pre-concentration system for determination of cadmium in drinking water using FAAS

In the present paper, a minicolumn of polyurethane foam loaded with 4-(2-pyridylazo)-resorcinol (PAR) is proposed as pre-concentration system for cadmium determination in drinking water samples by flame atomic absorption spectrometry. The optimization step was performed using two-level full factorial design and Doehlert matrix, involving the variables: sampling flow rate, elution concentration, buffer concentration and pH. Using the established experimental conditions in the optimization step of: pH 8.2, sampling flow rate 8.5 mL min(-1), buffer concentration 0.05 mol L(-1) and elution concentration of 1.0 mol L(-1), this system allows the determination of cadmium with detection limit (LD) (3sigma/S) of 20.0 ng L(-1) and quantification limit (LQ) (10sigma/S) of 64 ng L(-1), precision expressed as relative standard deviation (R.S.D.) of 5.0 and 4.7% for cadmium concentration of 5.0 and 40.0 microg L(-1), respectively, and a pre-concentration factor of 158 for a sample volume of 20.0 mL. The accuracy was confirmed by cadmium determination in the standard reference material, NIST SRM 1643d trace elements in natural water. This procedure was applied for cadmium determination in drinking water samples collected from Salvador City, Bahia, Brazil. For five samples analyzed, the achieved concentrations varied from 0.31 to 0.86 microg L(-1).

Adsorption Characteristics of a Nanodiamond for Oxoacid Anions and Their Application to the Selective Preconcentration of Tungstate in Water Samples

A nanodiamond with a mean particle size of 4 nm, which was prepared by the detonation of a nanodiamond, has been characterized and used as a collector for tungstate in water samples. An aqueous solution of nanodiamond was found to be stable over the pH range from 3 to 10. Coagulation of the nanodiamond could be brought about by adding an electrolyte solution. The adsorption characteristics of nanodiamond have been elucidated to be attributable to amino groups on its surface by the elemental-analysis data and the zeta potential measured in weak acid media. The unique adsorption properties of the nanodiamond for oxoacid anions were applied to a selective preconcentration method for tungstate in water samples. An appropriate amount of nanodiamond was added to a sample solution at pH 5 and a calcium chloride solution was added to aggregate nanodiamond. The sample solution was then allowed to stand for 2 h and centrifuged. The nanodiamond was transferred onto a membrane filter, washed with a diluted calcium chloride solution and treated in advance of an ICP-AES measurement by either of the following procedures: (a) redispersion of the nanodiamond into dilute nitric acid with an ultrasonic washer and (b) ashing of the membrane filter and the coagulated nanodiamond at 700 degrees C, followed by a treatment of the ash with hydrochloric and tartaric acids. The average recovery of tungstate from 100-ml artificial river-water was found to be 99% at the 0.25 ppm level with an RSD of 2.2% (n = 3). The concentration factor at present is 10.