Development of a rapid and sensitive immunoassay for detection and subsequent recovery of Bacillus anthracis spores in environmental samples

Highly sensitive sensing of DPA by lanthanide metal-organic frameworks and detection of fiber membranes

The detection of 2,6-pyridinecarboxylic acid (DPA), as a biomarker of Bacillus anthracis, has attracted wide attention. In previous reports of DPA detection, fluorescent probes may not have high specificity. Therefore, the rational design and development of fluorescent sensors with excellent performance is of great significance for the detection of DPA. In this study, two novel lanthanide metal-organic frameworks (Ln-MOFs) were synthesized by hydrothermal method using 3-polyfluorobiphenyl-3 ', 4,5 ' -tricarboxylic acid (H2FPTA) as ligand. Studies have shown that Ln-MOFs can detect DPA in real time, with detection limits of 0.54 μM and 0.67 μM, respectively, and have a high recovery rate (95 % -108 %) in fetal bovine serum. As a self-calibration sensor, other substances in the blood can be clearly distinguished by a two-dimensional fluorescence code diagram. After the Ln-MOFs were spun into nanofiber membranes, they responded quickly to DPA. This increases practicability and provides a promising idea for the development of simple and efficient ratio sensors.

Comparative evaluation of in-house developed latex agglutination test (LAT) with World Organisation for Animal Health (WOAH) -recommended methods for the detection of Bacillus anthracis spores from the soil

In-house developed Bacillus anthracis-specific synthetic peptide-based latex agglutination test (LAT) assay was comparatively evaluated with World Organisation for Animal Health (WOAH)-recommended polymerase chain reaction (PCR)/real-time PCR (qPCR) methods for the screening of B. anthracis spores from the soil to provide a simple, rapid, and economical immunodiagnostic test for field application.

Electrochemical, optical and mass-based immunosensors: A comprehensive review of Bacillus anthracis detection methods

A biosensor is an analytical device whose main components include transducer and bioreceptor segments. The combination of biological recognition with the ligand is followed by transformation into physical or chemical signals. Many publications describe biological sensors as user-friendly, easy, portable, and less time-consuming than conventional methods. Among major categories of methods for the detection of Bacillus anthracis, such as culture-based microbiological method, polymerase chain reaction (PCR) and enzyme-linked immunosorbent assay (ELISA), microarray-based techniques sensors with bioreceptors have been highlighted which particular emphasis is placed on herein. There are several types of biosensors based on various chemical or physical transducers (e.g., electrochemical, optical, piezoelectric, thermal or magnetic electrodes) and the type of biological materials used (e.g., enzymes, nucleic acids, antibodies, cells, phages or tissues). In recent decades, antibody-based sensors have increasingly gained popularity due to their reliability, sensitivity and rapidness. The fundamental principle of antibody-based sensors is mainly based on the molecular recognition between antigens and antibodies. Therefore, immunosensors that detect B. anthracis surface antigens can provide a rapid tool for detecting anthrax bacilli and spores, especially in situ. This review provides a comprehensive summary of immunosensor-based methods using electrochemical, optical, and mass-based transducers to detect B. anthracis.

A ratiometric fluorescent sensor made of a terbium coordination polymer for the anthrax biomarker 2,6-dipicolinic acid with on-site detection assisted by a smartphone app

Tb-NDBC is a quantitative ratiometric fluorescence sensor for DPA detection with high sensitivity and selectivity, a rapid response, and durability.

A luminescent terbium(iii) probe as an efficient ‘Turn-ON’ sensor for dipicolinic acid, a Bacillus Anthracis biomarker

This work drives the potential of lanthanide luminescence in the quantification and detection of the B. Anthracis bacterial spore by targeting dipicolinic acid (DPA), a principal component of anthrax spores.

Three novel metal-organic frameworks with different coordination modes for trace detection of anthrax biomarkers

Dipicolinic acid (DPA) is an anthrax biomarker. Its serious consequences make its detection a great need. In this paper, three novel metal-organic frameworks (MOFs) with different coordination modes were synthesized by a simple solvothermal method, which can be used as highly efficient fluorescence sensors for the highly selective and sensitive trace detection of DPA. MOFs 1-3 showed rapid responses to DPA (<30 s), and the limits of detection (LODs) were calculated to be 1.01 × 10^-6 M^-1 (MOF 1), 1.17 × 10^-6 M^-1 (MOF 2) and 2.07 × 10^-6 M^-1 (MOF 3). DPA detection based on MOFs 1-3 in fetal bovine serum is highly reliable based on the high recovery rates (90% to 115%). Hence, the three MOF-based sensors can be used in the real-time detection of DPA.

Construction of lanthanide-containing ratiometric probe for facile anthrax biomarker detection

Since the outbreak of anthrax attack in the United States in 2001, much effort has been done to detect anthrax spores. In this paper, a simple and facile lanthanide-containing ratiometric luminescence "turn on" probe is constructed to achieve sensitive and selective detection of anthrax spores biomarker - pyridine-2,6-carboxylic acid (DPA) by simply mixing Tb³⁺, sodium polyacrylate as well as red internal reference which could exclude some disturbance from the luminescence of biological tissue. Our probe shows remarkable luminescence enhancement upon addition of DPA. The detection limit for DPA is measured as 35.8 nM with a wide work range of 0-66.7 μM. Besides, our probe enables distinguish DPA selectively from numerous interfering materials in aqueous solution. Further test strip experiments demonstrate the potential practical application of our probe in DPA detection.

Recent progress and challenges on the bioassay of pathogenic bacteria

The present review (containing 242 references) illustrates the importance and application of optical and electrochemical methods as well as their performance improvement using various methods for the detection of pathogenic bacteria. The application of advanced nanomaterials including hyper branched nanopolymers, carbon-based materials and silver, gold and so on. nanoparticles for biosensing of pathogenic bacteria was also investigated. In addition, a summary of the applications of nanoparticle-based electrochemical biosensors for the identification of pathogenic bacteria has been provided and their advantages, detriments and future development capabilities was argued. Therefore, the main focus in the present review is to investigate the role of nanomaterials in the development of biosensors for the detection of pathogenic bacteria. In addition, type of nanoparticles, analytes, methods of detection and injection, sensitivity, matrix and method of tagging are also argued in detail. As a result, we have collected electrochemical and optical biosensors designed to detect pathogenic bacteria, and argued outstanding features, research opportunities, potential and prospects for their development, according to recently published research articles.

Rapid and Sensitive Multiplex Assay for the Detection of B. anthracis Spores from Environmental Samples

Prompt and accurate detection of Bacillus anthracis spores is crucial in the event of intentional spore dissemination in order to reduce the number of expected casualties. Specific identification of these spores from environmental samples is both challenging and time-consuming. This is due to the high homology with other Bacillus species as well as the complex composition of environmental samples, which further impedes assay sensitivity. Previously, we showed that a short incubation of B.anthracis spores in a defined growth medium results in rapid germination, bacterial growth, and secretion of toxins, including protective antigen. In this work, we tested whether coupling the incubation process to a newly developed immune-assay will enable the detection of secreted toxins as markers for the presence of spores in environmental samples. The new immune assay is a flow cytometry-based multiplex that simultaneously detects a protective antigen, lethal factor, and edema factor. Our combined assay detects 1 × 10³–1 × 10⁴/mL spores after a 2 h incubation followed by the ~80 min immune-multiplex detection. Extending the incubation step to 5 h increased assay sensitivity to 1 × 10²/mL spore. The protocol was validated in various environmental samples using attenuated or fully virulent B. anthracis spores. There was no substantial influence of contaminants derived from real environmental samples on the performance of the assay compared to clean samples, which allow the unequivocal detection of 3 × 10³/mL and 3 × 10²/mL spores following 2 and 5 hour’s incubation, respectively. Overall, we propose this method as a rapid, sensitive, and specific procedure for the identification of B. anthracis spores in environmental samples.

Ratiometric fluorescence determination of the anthrax biomarker 2,6-dipicolinic acid using a Eu3+/Tb3+-doped nickel coordination polymer

Tb³⁺_0.6/Eu³⁺_0.4@Ni-BTC is a quantitative ratiometric fluorescence sensor for DPA detection with high sensitivity, anti-interference, rapid response and durability.

Comprehensive Laboratory Evaluation of a Highly Specific Lateral Flow Assay for the Presumptive Identification of Bacillus anthracis Spores in Suspicious White Powders and Environmental Samples

We conducted a comprehensive, multiphase laboratory evaluation of the Anthrax BioThreat Alert(®) test strip, a lateral flow immunoassay (LFA) for the rapid detection of Bacillus anthracis spores. The study, conducted at 2 sites, evaluated this assay for the detection of spores from the Ames and Sterne strains of B. anthracis, as well as those from an additional 22 strains. Phylogenetic near neighbors, environmental background organisms, white powders, and environmental samples were also tested. The Anthrax LFA demonstrated a limit of detection of about 10(6) spores/mL (ca. 1.5 × 10(5) spores/assay). In this study, overall sensitivity of the LFA was 99.3%, and the specificity was 98.6%. The results indicated that the specificity, sensitivity, limit of detection, dynamic range, and repeatability of the assay support its use in the field for the purpose of qualitatively evaluating suspicious white powders and environmental samples for the presumptive presence of B. anthracis spores.

Evanescent wave fluorescence biosensors: Advances of the last decade

Biosensor development has been a highly dynamic field of research and has progressed rapidly over the past two decades. The advances have accompanied the breakthroughs in molecular biology, nanomaterial sciences, and most importantly computers and electronics. The subfield of evanescent wave fluorescence biosensors has also matured dramatically during this time. Fundamentally, this review builds on our earlier 2005 review. While a brief mention of seminal early work will be included, this current review will focus on new technological developments as well as technology commercialized in just the last decade. Evanescent wave biosensors have found a wide array applications ranging from clinical diagnostics to biodefense to food testing; advances in those applications and more are described herein.

Development of a simple method for the rapid identification of organisms causing anthrax by coagglutination test

A protective antigen (PA) based coagglutination test was optimized in the present study for the specific and sensitive identification of bacteria causing anthrax in a cost effective and less risky manner. The test showed 100% specificity and sensitivity up to 9 × 10(3) formalinized vegetative cells or 11 ng of PA. The optimized test also detected anthrax toxin directly from the serum as well as blood of anthrax infected animals indicating the potential application for direct diagnosis of anthrax under field conditions.

Peptide sharing between Bordetella pertussis proteome and human sudden death proteins: a hypothesis for a causal link

AIM

To explore the molecular basis of the relationship between Bordetella pertussis infection and sudden death.

METHODS

B. pertussis proteins were analyzed for amino acid sequence identity to a set of 67 human proteins that, when altered, have been associated with sudden death.

RESULTS

More than 82,000 pentapeptides are shared between B. pertussis proteins and sudden death-associated antigens.

CONCLUSION

Results suggest that a possible link between B. pertussis infection and sudden death might be represented by potential immunological cross-reactions occurring between B. pertussis proteins and human proteins associated to sudden death.

Fast and sensitive detection of Bacillus anthracis spores by immunoassay

Bacillus anthracis is one of the most dangerous potential biological weapons, and it is essential to develop a rapid and simple method to detect B. anthracis spores in environmental samples. The immunoassay is a rapid and easy-to-use method for the detection of B. anthracis by means of antibodies directed against surface spore antigens. With this objective in view, we have produced a panel of monoclonal antibodies against B. anthracis and developed colorimetric and electrochemiluminescence (ECL) immunoassays. Using Meso Scale Discovery ECL technology, which is based on electrochemiluminescence (ECL) detection utilizing a sulfo-Tag label that emits light upon electrochemical stimulation (using a dedicated ECL plate reader, an electrical current is placed across the microplate with electrodes integrated into the bottom of the plate, resulting in a series of electrically induced reactions leading to a luminescent signal), a detection limit ranging between 0.3 × 10(3) and 10(3) CFU/ml (i.e., 30 to 100 spores per test), depending on the B. anthracis strain assayed, was achieved. In complex matrices (5 mg/ml of soil or simulated powder), the detection level (without any sample purification or concentration) was never altered more than 3-fold compared with the results obtained in phosphate-buffered saline.

Bacteriophage based probes for pathogen detection

Rapid and specific detection of pathogenic bacteria is important for the proper treatment, containment and prevention of human, animal and plant diseases. Identifying unique biological probes to achieve a high degree of specificity and minimize false positives has therefore garnered much interest in recent years. Bacteriophages are obligate intracellular parasites that subvert bacterial cell resources for their own multiplication and production of disseminative new virions, which repeat the cycle by binding specifically to the host surface receptors and injecting genetic material into the bacterial cells. The precision of host recognition in phages is imparted by the receptor binding proteins (RBPs) that are often located in the tail-spike or tail fiber protein assemblies of the virions. Phage host recognition specificity has been traditionally exploited for bacterial typing using laborious and time consuming bacterial growth assays. At the same time this feature makes phage virions or RBPs an excellent choice for the development of probes capable of selectively capturing bacteria on solid surfaces with subsequent quick and automatic detection of the binding event. This review focuses on the description of pathogen detection approaches based on immobilized phage virions as well as pure recombinant RBPs. Specific advantages of RBP-based molecular probes are also discussed.

Bulk- and surface-modified combinable PDMS capillary sensor array as an easy-to-use sensing device with enhanced sensitivity to elevated concentrations of multiple serum sample components

To enhance sensitivity and facilitate easy sample introduction into a combinable poly(dimethylsiloxane) (PDMS) capillary (CPC) sensor array, PDMS was modified in bulk and on its surface to prepare "black" PDMS coated with a silver layer and self-assembled monolayer (SAM). India ink, a traditional Japanese black ink, was added to the PDMS pre-polymer for bulk modification. The surface was modified by a silver mirror reaction followed by SAM formation using cysteine. These modifications enhanced the fluorescence signals by reflecting them from the surface and reducing background interference. A decrease in the water contact angle led to enhanced sensitivity and easy sample introduction. Furthermore, a CPC sensor array for multiplex detection of serum sample components was prepared that could quantify the analytes glucose, potassium, and alkaline phosphatase (ALP). When serum samples were introduced by capillary action, the CPC sensor array showed fluorescence responses for each analyte and successfully identified the components with elevated concentrations in the serum samples.

Development of antibodies against anthrose tetrasaccharide for specific detection of Bacillus anthracis spores

Methods for the immunological detection of Bacillus anthracis in various environmental samples and the discrimination of B. anthracis from other members of the B. cereus group are not yet well established. To generate specific discriminating antibodies, we immunized rabbits, mice, and chickens with inactivated B. anthracis spores and, additionally, immunized rabbits and mice with the tetrasaccharide beta-Ant-(1-->3)-alpha-L-Rhap-(1-->3)-alpha-L-Rhap-(1-->2)-L-Rhap. It is a constituent of the exosporium glycoprotein BclA and contains the newly discovered sugar anthrose 2-O-methyl-4-(3-hydroxy-3-methylbutamido)-4,6-dideoxy-beta-D-glucose. The BclA protein is a major component of the exosporium of B. anthracis spores and is decorated by the tetrasaccharide indicated above. The anthrose-containing tetrasaccharide chain seems to be highly specific for B. anthracis, which makes it a key biomarker for the detection of these spores. The different immunizations led to anthrose-reactive polyclonal and monoclonal antibodies which were analyzed by various methods to characterize their ability to discriminate between B. anthracis and other Bacillus spp. Multiple applications, such as enzyme-linked immunosorbent assay, indirect immunofluorescence assay, and electron microscopy, revealed the specificities of the polyclonal and monoclonal antibodies generated for B. anthracis spore detection. All polyclonal antibodies were able to correctly identify the B. anthracis strains tested and showed only minimal cross-reactivities with other Bacillus strains. Moreover, the antibodies generated proved functional in a new capture assay for B. anthracis spores and could therefore be useful for the detection of spores in complex samples.