Antidepressant drug amitriptyline hydrochloride (AMT) interaction with anionic surfactant sodium dodecyl sulfate in aqueous/brine/urea solutions at different temperatures

A recent overview of surfactant-drug interactions and their importance

This review focuses on the self-aggregation properties of different drugs, as well as on their interaction with anionic, cationic, and gemini surfactants. The interaction of drugs with surfactants has been reviewed concerning conductivity, surface tension, viscosity, density, and UV-Vis spectrophotometric measurements, and their relation with critical micelle concentration (CMC), cloud point, and binding constant. The conductivity measurement technique is used for the micellization of ionic surfactants. Cloud point studies can be used for the non-ionic, and also for certain ionic surfactants. Usually, surface tension studies are mostly employed for non-ionic surfactants. The degree of dissociation that is determined is used to evaluate thermodynamic parameters of micellization at various temperatures. The effect of external parameters like temperature, salt, solvent, pH, etc., is discussed for thermodynamics parameters using recent experimental works on drug-surfactant interactions. Consequences of drug-surfactant interaction, condition of drugs during interaction with surfactants, and applications of drug-surfactant interaction are being generalized which reflects current and future potential uses of drug-surfactant interactions.

Physicochemical approaches reveal the impact of electrolytes and hydrotropic salt on micellization and phase separation behavior of polymer polyvinyl alcohol and surfactant mixture

The polymer-surfactant mixture has usages in numerous industries mainly in the production of daily used materials. Herein, the micellization and phase separation nature of the sodium dodecyl sulfate (SDS) and TX-100 along with a synthetic water-soluble polymer-polyvinyl alcohol (PVA) have been conducted using conductivity and cloud point (CP) measurement tools. In the case of micellization study of SDS + PVA mixture by conductivity method, the CMC values were obtained to be dependent on the categories and extent of additives as well as temperature variation. Both categories of studies were performed in aq. solutions of sodium chloride (NaCl), sodium acetate (NaOAc), and sodium benzoate (NaBenz) media. The CP values of TX 100 + PVA were decreased and enhanced in simple electrolytes and sodium benzoate media respectively. In all cases, the free energy changes of micellization (∆G_m⁰) and clouding (∆G_c⁰) were obtained as negative and positive respectively. The enthalpy (∆H_m⁰) and entropy (∆S_m⁰) changes for SDS + PVA system micellization was negative and positive respectively in aq. NaCl and NaBenz media, and in aq. NaOAc medium the ∆H_m⁰ values were found negative while ∆S_m⁰ were found negative except at the highest studied temperature (323.15 K). The enthalpy-entropy compensation of both processes was also assessed and described clearly.

Investigation of Solution Behavior of Antidepressant Imipramine Hydrochloride Drug and Non-Ionic Surfactant Mixture: Experimental and Theoretical Study

In this paper, the interaction of imipramine hydrochloride (IMP, antidepressant drug) and a non-ionic surfactant Triton X-100 (TX-100) mixture in five different ratios through the tensiometric method in different solvents (aqueous/0.050 mol·kg⁻¹ aqueous NaCl/0.250 mol·kg⁻¹ aqueous urea (U)) were examined thoroughly at a temperature of 298 K. UV–Visible studies in an aqueous system of IMP + TX-100 mixtures were also investigated and discussed in detail. The pure (IMP and TX-100) along with the mixtures’ critical micelle concentration (cmc) were assessed by a tensiometric technique. The obtained deviation of the mixtures’ cmc values from their ideal values revealed the nonideal behavior of IMP + TX-100 mixtures amongst IMP and TX-100. Compared to aqueous systems, in the presence of aqueous NaCl, several changes in micelles/mixed micelles occurred, and hence a synergism/attractive interaction amongst components was found increased while in the existence of U, the synergism/attractive interaction between them decreased. The evaluated interaction parameter (β^Rb) value of mixed micelles showed the attractive or synergism between the IMP and TX-100. Various evaluated thermodynamic parameters in an aqueous system showed that the mixed micellization of the IMP + TX-100 mixture was an entropically spontaneous phenomenon, although the existence of salt in all studied systems can somewhat increase the spontaneity of the micellization process and in the aqueous U system, the spontaneity of the micellization process decreased. In an aqueous system, the interaction between IMP and TX-100 was also confirmed by UV–Visible study.

Mixed Micellization and Spectroscopic Studies of Anti-Allergic Drug and Non-Ionic Surfactant in the Presence of Ionic Liquid

In drug delivery, surfactants are used to reduce side effects and to increase drug efficiency. The present work aimed to study the interaction of diphenhydramine hydrochloride (anti-allergic drug) with TX–45 (non-ionic surfactant) in the absence and presence of ionic liquid (1-hexyl-3-methylimidazolium chloride). The physicochemical parameters were estimated by the surface tension measurement. Various theoretical models (Clint, Rubingh, Motomura, and Maeda) were applied to determine the attractive behavior between drug and surfactant mixtures at the surface and in bulk. The drug and surfactant mixtures exhibit synergistic behavior in the absence and presence of ionic liquid. Several energetic parameters were also estimated with the assistance of regular solution approximation and pseudo phase separation model that indicate micelle formation and adsorption of surfactant at the surface is thermodynamically advantageous. The morphology of pure and mixture of amphiphiles has been estimated by the Tanford and Israelachvili theories. UV-visible spectroscopy was used to quantify the attractive behavior of the drug with surfactant with the help of a binding constant (K).

Aggregation behavior and thermodynamic properties of the mixture of sodium carboxymethyl cellulose and cetyltrimethylammonium bromide in numerous temperatures and mixed solvents

Interaction of sodium carboxymethylcellulose (SCMC) with cetyltrimethylammonium bromide (CTAB; cationic in nature) in H2O and additives (alcohols and diols) media has been investigated using conductivity technique. The micellar parameters such as critical micelle concentration (cmc), fraction of counter ion binding (β), thermodynamic parameters, transfer properties, and enthalpy-entropy compensation parameters of CTAB + SCMC mixture have been assessed in water and aq. alcohols/diols media. One cmc value was achieved for CTAB + SCMC mixtures in the entire circumstances and the attendance of SCMC disfavors the CTAB micellization. The cmc values were obtained to be greater in alcohols and diols media compared to H2O medium. The cmc values also exhibit a dependency on the solvent composition and temperature variation. In all the cases, the ΔG 0 m values were achieved to be negative which signifying the spontaneous formation of micelles while the extent of spontaneity is decreased in alcohols and diols media. Both the ΔH 0 m and ΔS 0 m reveal that hydrophobic, ion-dipole as well as electrostatic interactions are the proposed binding forces between CTAB and SCMC. The compensation parameters (ΔH 0* m and T c ) are in decent agreement with the biological fluid.

Investigation of micellar and interfacial phenomenon of amitriptyline hydrochloride with cationic ester-bonded gemini surfactant mixture in different solvent media

Herein, the interaction among the antidepressant drug amitriptyline hydrochloride (AMT) and a green gemini surfactant, ethane-1, 2-diyl bis(N,N-dimethyl-N-tetradecylammoniumacetoxy) dichloride (14-E2-14), via numerous techniques such as tensiometry, fluorimetry, FT-IR and UV-visible spectroscopy in three different media (aqueous 0.050 mol·kg^-1 NaCl, 0.50 and 1.0 mol·kg^-1 urea) were investigated. AMT is used to treat mental illness or mood problems, such as depression. The aggregation of biologically active ingredients can enhance the bioavailability of hydrophobic drugs. A significant interaction between AMT and 14-E2-14 was detected by tensiometric study as the critical micelle concentration (cmc) of AMT+14-E2-14 is reduced upon an increase of mole fraction (α₁) of 14-E2-14. The decrease in cmc indicates the nonideality of studied mixtures of different compositions. Although, employed drug AMT is freely soluble in the aqueous and non-aqueous system but is not hydrophobic enough to act as its carrier. Instead, gemini surfactant formed spherical micelles in an aqueous system and their high solubilization capability, as well as their relatively lower cmc value, makes them highly stable in vivo. The cmc values of AMT+14-E-14 mixtures in all cases were further decreased and increased in NaCl and urea solutions respectively as compared with the aqueous system. Numerous micellar, interfacial, and thermodynamic parameters have been measured by applying various theoretical models. The obtained changes in the physicochemical assets of AMT upon adding of 14-E2-14 are likely to enhance the industrial and pharmaceutical applications of gemini surfactants. The negative interaction parameters (β^m and β^σ), indicate synergistic attraction is occurring in the mixed systems. The aggregation number (N_agg), Stern–Volmer constant (K_sv), etc. are attained through the fluorescence method, also supporting the attractive interaction behavior of AMT+14-E2-14 mixtures in all solvents. The N_agg was found to increase in the salt solution and decrease in the urea system compared with the aqueous solution. FT-IR and UV-visible analysis also depict the interaction between the constituent alike tensiometry and fluorimetry methods. The results suggested that gemini surfactants may serve as a capable drug delivery agent for antidepressants, improving their bioavailability.

Aggregation behavior of cetyldimethylethylammonium bromide under the influence of bovine serum albumin in aqueous/electrolyte solutions at various temperatures and compositions: conductivity and molecular dynamics study

Herein, we have investigated the interaction of bovine serum albumin (BSA), the most abundant globular protein, with a conventional cationic surfactant, cetyldimethylethylammonium bromide (CDMEAB), through a conductivity technique in the absence/presence of electrolyte solutions at various temperatures (298.15-323.15 K). The interaction of the protein with drugs/surfactants and other additives plays a crucial role in the body. Hence, the main concern of the study is to extract the impact of BSA on surfactant molecules and vice versa. From the specific conductivity versus concentration of surfactant plots, three different noticeable critical micelle concentration (c*) values were obtained for pure CDMEAB and its mixture with protein/protein + salts. The presence of BSA and electrolytes altered the c* values of CDMEAB revealing interactions among the studied constituents where the salt solutions reduced the c* values and created a convenient environment for favorable micellization. The negative magnitudes achieved for standard free energy changes (ΔG 0 m) suggest spontaneity of micellization while the values of ΔH 0 m and ΔS 0 m signified the existence of some electrostatic and hydrophobic interactions. The values of molar heat capacity (ΔC 0 m) were positive as well as small which was an indication of less structural deformation. Molecular Dynamics (MD) simulation for all atoms revealed that the salt ions promoted non-covalent interaction between BSA and CDMEAB, and such interactions were not observed in the absence of the salt. Protein structure remained nearly same in spite of strong interaction with CDMEAB as evident from the overall RMSD (root-mean-square deviation) values of the alpha carbons and backbone of the protein and RMSF (root-mean-square fluctuation) values of the amino acid residues present in BSA. In this work thermodynamic parameters of transfer (such as ΔG 0 m.tr., ΔH 0 m.tr., and ΔC 0 p.m.tr.) were also evaluated and the results are discussed in detail. Besides, contributions of enthalpy and entropy to free energy changes were also analyzed.

Aggregation and interfacial phenomenon of amphiphilic drug under the influence of pharmaceutical excipients (green/biocompatible gemini surfactant)

In the current study, we have examined the interaction amongst an antidepressant drug amitriptyline hydrochloride (AMH) and ethane-1, 2-diyl bis(N,N-dimethyl-N-cetylammoniumacetoxy) dichloride (16-E2-16, a green gemini surfactant) through tensiometric and fluorimetric techniques in aqueous/electrolyte/urea solutions. Significant variations are observed in the various evaluated parameters in the present study. Gemini 16-E2-16 has outstanding surface properties along with a much lower cmc value, demonstrating very little toxicity as well as considerable antimicrobial activity. The cmc values of mixtures decrease through increase in mole fraction (α₁) of 16-E2-16, which specifies the nonideality of the solution mixtures, along with demonstrating the occurrence of mixed micellization too. Negative β^Rub values signify on the whole attractive force of interaction between constituents of mixed micelles. Owing to the incidence of electrolyte NaCl (50 mmol.kg^–1), lowering of the micelles’ surface charge happens, resulting in aggregation taking place at lower concentration while the presence of urea (NH₂CONH₂) halts micellization taking place, which means the cmc value increases in the attendance of urea. The ΔGmo values for all systems were negative along with the presence of electrolyte/urea. The excess free energy (G_ex) of studied mixed systems was also estimated and found to be negative for all the systems. Using the fluorescence quenching method, the micelle aggregation number (N_agg) was evaluated and it was found that the contribution of gemini surfactant was always more than that of the AMH and their value enhances in the existence of electrolyte while decreasing in the attendance of NH₂CONH₂ in the system. In addition, other fluorescence parameters such as micropolarity (I₁/I₃), dielectric constant (D_exp) as well as Stern–Volmer binding constants (K_sv) of mixed systems were evaluated and the results showed the synergistic performance of the AMH + 16-E2-16 mixtures. Along with tensiometric and fluorimetric techniques, FT-IR spectroscopy was also engaged to reveal the interaction among constituents.