Removal of Cd (II) from water by using nano-scale molybdenum disulphide sheets as adsorbents

Processes and mechanisms in remediation of aqueous chromium contamination by sulfidated nano-scale zerovalent iron (S-nZVI): Experimental and computational investigations

Sulfidated nano-scale zerovalent iron (S-nZVI) has emerged as an advanced functional nanomaterial for efficiently remediating Cr(VI) contamination in aqueous environments. However, there is an insufficient understanding of its coherent process, removal pathway, and hydrochemical reactive mechanisms, presenting potential challenges for its future environmental applications. To address this gap, this study successfully synthesized S-nZVI through a chemical precipitation method and effectively applied it for the removal of Cr(VI). Additional characterization revealed that the removal of Cr(VI) followed a sequence of rapid chemisorption and intraparticle diffusion processes, concomitant with an increase in pH and a decrease in oxidation-reduction potential. The remediation mechanism encompassed a synergistic reduction of Cr(VI) to Cr(III) and simultaneous immobilization via Cr2FeO4 coprecipitation. The highest Cr(VI) removal capacity of 75 mg/g was attained during dynamic removal experiments in the sand column packed with S-nZVI. Further computational analysis, employing density functional theory calculations based on the experimental data, revealed the involvement of multiple molecular orbitals of Cr(VI) in the removal process. It also elucidated a step-by-step reduction pathway for Cr(VI) characterized by decreasing free energy. These findings provide evidence-based insights into Cr(VI) remediation using S-nZVI and can serve as valuable technical support for future environmental management of heavy metals.

Ultra-fast uranium capture via the synergistic interaction of the intrinsic sulfur atoms and the phosphoric acid groups adhered to edge sulfur of MoS2

In order to deal with the sudden nuclear leakage event to suppress the spread of radioactive contaminants in a short period of time, it is extremely urgent needed to explore an adsorbent that could be capable of in-situ remedial actions to rapidly capture the leaked radionuclides in split second. An adsorbent was developed that MoS₂ via ultrasonic to expose more surface defects afterwards functionalized by phosphoric acid resulting in more active sites being endowed on the edge S atoms of Mo-vacancy defects, while simultaneously increased the hydrophilicity and interlayer spacing. Hence, an overwhelming fast adsorption rates (adsorption equilibrium within 30 s) are presented and place the MoS₂-PO₄ at the top of performing sorbent materials. Moreover, the maximum capacity calculated from Langmuir model is as high as 354.61 mg·g^-1, the selective adsorption capacity (S_U) achieving 71.2% in the multi-ion system and with more than 91% capacity retention after 5 cycles of recycling. Finally, XPS and DFT insight into the adsorption mechanism, which can be explained as interaction of UO₂²⁺ on the surface of MoS₂-PO₄ by forming U-O and U-S bonds. The successful fabrication of such a material may provide a promising solution for emergency treatment of radioactive wastewater during nuclear leakage events.

Nanocellulose-Based Adsorbents for Heavy Metal Ion

Heavy metal ions in industrial sewage constitute a serious threat to human health. Nanocellulose-based adsorbents are emerging as an environmentally friendly material platform for heavy metal ion removal based on their unique properties, which include high specific surface area, excellent mechanical properties, and biocompatibility. In this review, we cover the most recent works on nanocellulose-based adsorbents for heavy metal ion removal and present an in-depth discussion of the modification technologies for nanocellulose in the process of assembling high-performance heavy ion adsorbents. By introducing functional groups, such as amino, carboxyl, aldehyde, and thiol, the assembled nanocellulose-based adsorbents both remove single heavy metal ions and can selectively adsorb multiple heavy ions in water. Finally, the remaining challenges of nanocellulose-based adsorbents are pointed out. We anticipate that this review will provide indispensable guidance on the application of nanocellulose-based adsorbents for the removal of heavy metal ions.

The enhanced removal of arsenite from water by double-shell CuOx@MnOy hollow spheres (DCMHS): behavior and mechanisms

To facilitate removing As(III) from water through an "oxidation-adsorption" process, the double-shell CuO_x@MnO_y hollow spheres (DCMHS) have been fabricated via a two-step co-precipitation route combined with the soft-template method. The surface characterization results showed that Mn oxides were formed without segregation and uniformly distributed on the surface of CuO_x hollow spheres. DCMHS could achieve outstanding performance to remove As(III) with an As maximum adsorption capacity of 32.15 mg/g. Meanwhile, the kinetics results illustrated that the oxidative activity of DCMHS was strengthened due to its specific structure, and part of As(III) was converted to As(V) during the adsorption process. Also, air aeration could further enhance As(III) oxidation and thus improving As removal. The As(III) removal performance could be maintained under neutral and weak alkaline conditions. Phosphate, silicate, and carbonate anions could depress the removal performance, while chloride ions and sulfate anions barely influenced As removal. Moreover, DCMHS could be regenerated using NaOH and KMnO₄ solutions without breaking the hollow sphere structure. Based on the spectroscopic analysis results, As(III) molecules were converted to As(V) via two pathways, including the oxidation by Mn oxides or superoxide radicals. The Cu-Mn synergistic effect could not only enhance the oxidative activity of Mn oxides but also produce superoxide radicals via the activation of surface-adsorbed oxygen molecules. Afterwards, the newly formed As(V) could be attached to the hydroxyl groups through surface complexation. Therefore, this work has provided insights into the morphology design of Mn-oxide-containing adsorbents and supplemented the interface reaction mechanisms for enhancing As(III) removal.

Alkynyl functionalized MoS2 mesoporous materials with superb adsorptivity for heavy metal ions

Effective elimination of heavy metal ions from water is an arduous task for their toxic effects to aquatic ecosystem and human health. Herein, a novel alkynyl functionalized molybdenum disulfide (C-MoS₂) is fabricated via mechanochemical method with well interlayered spacing, meso porosity, and high surface area (~211 m²g^-1). Mineral MoS₂ was first peeled mechanically and oxidized in situ to MoS_2-xO_x, and then reduced by ball milling with CaC₂ to form the C-MoS₂ composite. The as-obtained C-MoS₂ shows extraordinary adsorptivity for heavy metal ions, viz. 1194 mg-Hg g^-1 (Hg(NO₃)₂ solution, pH= 5, 303.15 K, equilibrium Hg(II) concentration Ce= 36.9 μg·g^-1, ionic strength I= 17.2 mmolL^-1), and 442.3 mg-Pbg^-1 (Pb(NO₃)₂ solution, pH= 5, 303.15 K, equilibrium Pb(II) concentration Ce= 46.9μgg^-1, I= 5.8 mmolL^-1), respectively, along with excellent recyclability, representing one of the best sorbents till now. The adsorption isotherms of Hg(II) followed the Langmuir model and the adsorption kinetics followed the pseudo-second-order model. The adsorption is an endothermic and entropy driven spontaneous process. The excellent adsorption performance of C-MoS₂ is attributed to its very high S-content, availability, and soft acid-base interaction with mercury and lead anions. The C-MoS₂ is an advanced sorbent for Hg(II) and Pb(II) with excellent adsorption performance and recyclability.

Synergetic degradation of Methylene Blue through photocatalysis and Fenton reaction on two-dimensional molybdenite-Fe

The greatest problem in conventional Fenton reaction is the slow production of ROS (reactive oxygen species) because of the inefficient Fe³⁺/Fe²⁺ conversion. Based on the extraordinary photo-response property of two-dimensional molybdenite (2DM), photogenerated electrons can be easy separated to accelerate the regeneration of Fe²⁺. In this work, Fe²⁺-anchored 2DM (2DM-Fe) was prepared and used as a heterogeneous Fenton catalyst to investigate the degradation efficiency to Methylene Blue (MB) in the presence of light. According to experimental results, 2DM-Fe exhibited extraordinary catalytic activity in MB elimination, which ascribed to the synergetic effect of photogenerated carriers and anchored Fe²⁺ to H₂O₂ activation. In addition, 2DM-Fe showed nearly 100% degradation efficiency to MB within 5 cycles with slight leaching amount of Mo and Fe ions, implying the strong stability and reusability in H₂O₂ system. Furthermore, the influences of H₂O₂ and 2DM-Fe dosages, pH values as well as the degradation efficiency to different dyes were also investigated. According to quenching experiments and EPR (electron paramagnetic resonance) test, the degradation mechanism of MB mainly ascribed to the oxidation of HO• and •O₂^-. This finding provides a novel strategy to design rational Fenton catalyst and has great significance to water remediation in the future.

Facile preparation of sulfhydryl modified montmorillonite nanosheets hydrogel and its enhancement for Pb(II) adsorption

In the work, sulfhydryl functionalized montmorillonite nanosheets based hydrogel balls were firstly synthesized for Pb(II) adsorption, and then characterized by scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), surface area analyzer (BET), thermogravimetry (TG), and zeta potential. Effects of initial solution pH, adsorbent dosage, contact time, temperature on Pb(II) adsorption of the resulting hydrogel balls were investigated systematically. The experimental results showed that the increase amount of sulfhydryl functionalized montmorillonite nanosheets (MMTNs-SH) maintained the hydrogel balls a better porous structure and bigger specific surface area, endowing it a bigger adsorption capacity. The adsorption process was fitted well with pseudo-second-order kinetics model and Freundlich model, and more than 97% of Pb(II) could be removed under the optimum conditions. Moreover, hydrogel spheres have a certain cycle performance. In addition, the interactions between Pb(Ⅱ) ions and the oxygen atoms in the hydroxyl groups and the sulfur atoms in the sulfhydryl groups, and the ion exchange in MMTNs-SH dominated the adsorption.

Mechanism of novel MoS2-modified biochar composites for removal of cadmium (II) from aqueous solutions

The purpose of this study was to develop a MoS₂-impregnated biochar (MoS₂@BC) via hydrothermal reaction for adsorption of cadmium (Cd) from an aqueous solution. The prepared adsorbents were characterized, and their abilities to remove Cd(II) were evaluated. The Langmuir and pseudo-second-order models better described the removal of Cd(II) by MoS₂@BC. The prepared MoS₂@BC exhibited excellent monolayer adsorption capacity. The S-containing functional groups on MoS₂@BC enhanced the adsorption of Cd(II). Multiple Cd(II) sorption mechanisms were identified; including Cd(II)-π interactions, ion exchange, electrostatic interaction, and complexation. The dominant mechanism involved Cd-O (38.3%) bonds and Cd-S complexation (61.7%) on MoS₂@BC. The as-prepared MoS₂@BC is both economical and efficient, making it an excellent material for environmental Cd(II) remediation.

Aqueous Adsorption of Heavy Metals on Metal Sulfide Nanomaterials: Synthesis and Application

Heavy metals pollution of aqueous solutions generates considerable concerns as they adversely impact the environment and health of humans. Among the remediation technologies, adsorption with metal sulfide nanomaterials has proven to be a promising strategy due to their cost-effective, environmentally friendly, surface modulational, and amenable properties. Their excellent adsorption characteristics are attributed to the inherently exposed sulfur atoms that interact with heavy metals through various processes. This work presents a comprehensive overview of the sequestration of heavy metals from water using metal sulfide nanomaterials. The common methods of synthesis, the structures, and the supports for metal sulfide nano-adsorbents are accentuated. The adsorption mechanisms and governing conditions and parameters are stressed. Practical heavy metal remediation application in aqueous media using metal sulfide nanomaterials is highlighted, and the existing research gaps are underscored.

Cadmium-ion detection: a comparative study for a SnO2, MoS2, SnO2/MoS2, SnO2-MoS2 sensing membrane combination with a fiber-optic Mach-Zehnder interferometer

A novel fiber-optic Mach-Zehnder interferometer based on SnO₂, MoS₂, SnO₂/MoS₂, and SnO₂-MoS₂ sensing film for cadmium-ion (Cd²⁺) detection is proposed and fabricated. The photonic-crystal fiber (PCF) is sandwiched between the no-core-fiber-1 (NCF1) and no-core-fiber-2 (NCF2), forming the Mach-Zehnder interferometer with the NCF1-PCF-NCF2 structure, which is regarded as the sensing unit. The SnO₂, MoS₂, SnO₂/MoS₂, and SnO₂-MoS₂ sensing films are, respectively, coated on the surface of two NCFs' claddings. The comparative experiment results of the sensors with four membranes (SnO₂, MoS₂, SnO₂/MoS₂, SnO₂-MoS₂) show that the sensors have good sensing performance for Cd²⁺ in the concentration range of 0-100 µM. When these sensing films adsorbed Cd²⁺, the monitoring wavelength shows blueshift of 0.6931 nm, 1.0252 nm, 1.9505 nm, respectively, and redshift of 3.0258 nm, and the sensitivities are 6.931 pm/µM, 10.252 pm/µM, 19.505 pm/µM, and 30.258 pm/µM, respectively. The sensor with SnO₂-MoS₂ bilayer film exhibits the optimal response to Cd²⁺ with excellent selectivity and stability. The proposed sensor has the advantages of simple structure, easy fabrication, small size, etc., having potential application in the monitoring of Cd²⁺ in aqueous solution.

Bacterial Nanocellulose/MoS2 Hybrid Aerogels as Bifunctional Adsorbent/Photocatalyst Membranes for in-Flow Water Decontamination

To address the problems associated with the use of unsupported nanomaterials, in general, and molybdenum disulfide (MoS₂), in particular, we report the preparation of self-supported hybrid aerogel membranes that combine the mechanical stability and excellent textural properties of bacterial nanocellulose (BC)-based organic macro/mesoporous scaffolds with the excellent adsorption-cum-photocatalytic properties and high contaminant removal performance of MoS₂ nanostructures. A controlled hydrothermal growth and precise tuning of the synthetic parameters allowed us to obtain BC/MoS₂-based porous, self-supported, and stable hybrid aerogels with a unique morphology resulting from a molecular precision in the coating of quantum-confined photocatalytic MoS₂ nanostructures (2-4 nm crystallite size) on BC nanofibrils. These BC/MoS₂ samples exhibit high surface area (97-137 m²·g^-1) and pore volume (0.28-0.36 cm³·g^-1) and controlled interlayer distances (0.62-1.05 nm) in the MoS₂ nanostructures. Modification of BC with nanostructured MoS₂ led to an enhanced pollutants removal efficiency of the hybrid aerogels both by adsorptive and photocatalytic mechanisms, as indicated by a detailed study using a specifically designed membrane photoreactor containing the developed photoactive/adsorptive BC/MoS₂ hybrid membranes. Most importantly, the prepared BC/MoS₂ aerogel membranes showed high performance in the photoassisted in-flow removal of both organic dye (methylene blue (MB)) molecules (96% removal within 120 min, K_obs = 0.0267 min^-1) and heavy metal ions (88% Cr(VI) removal within 120 min, K_obs = 0.0012 min^-1), separately and/or simultaneously, under UV-visible light illumination as well as excellent recyclability and photostability. Samples with interlayer expanded MoS₂ nanostructures were particularly more efficient in the removal of smaller species (CrO₄^2-) as compared to larger (MB) dye molecules. The prepared hybrid aerogel membranes show promising behavior for application in in-flow water purification, representing a significant advancement in the use of self-supported aerogel membranes for photocatalytic applications in liquid media.

Properties and adsorption mechanism of magnetic biochar modified with molybdenum disulfide for cadmium in aqueous solution

In this paper, we present the preparation of MoS₂-modified magnetic biochar (MoS₂@MBC) as a novel adsorbent by a simple hydrothermal method. MoS₂@MBC contains abundant S-containing functional groups that facilitate efficient Cd(II) removal from aqueous systems. We employed various characterization techniques to explore the morphology, surface area, and chemical composition of MoS₂@MBC; these included Brunauer-Emmett-Teller analysis scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction,. The results indicated the successful decoration of the surface of MoS₂@MBC with iron and MoS₂, and a higher surface area of MoS₂@MBC than that of unmodified biochar. Moreover, adsorption properties including thermodynamics and kinetics were investigated along with the effects of pH, humic acid, and ionic strength on the Cd(II) adsorption onto MoS₂@MBC. The O-, C-, S-, and Fe-containing functional groups on the surface of MoS₂@MBC led to an electrostatic attraction of Cd(II) and strong Cd-S complexation. The Langmuir and pseudo second-order models fitted best for the batch adsorption experiments results. The adsorption capacity of MoS₂@MBC (139 mg g^-1 on the basis of the Langmuir model) was 7.81 times higher than that of pristine biochar. The adsorption process was found to be pH-dependent. The experimental results indicated that MoS₂@MBC is an effective adsorbent for removing Cd(II) from water solutions. Further, the adsorption process involved the complexation of Cd(II) with oxygen-based functional groups, ion exchange, electrostatic attraction, Cd(II)-π interactions, metal-sulfur complexation, and inner-surface complexation. This work provides new insights into the Cd(II) ions removal from water via adsorption. It also demonstrates that MoS₂@MBC is an efficient and economic adsorbent to treat Cd(II)-contaminated water.

Facile Preparation of Three-Dimensional MoS2 Aerogels for Highly Efficient Solar Desalination

Aerogels, with porous channels for water supply and vapor escape, can provide many inherent advantages in solar desalination and wastewater treatment. For the first time, this work demonstrates the preparation of a novel three-dimensional (3D) MoS₂-based aerogel with high porosity and mechanical stability by a facile strategy for solar desalination. This 3D MoS₂ aerogel has an excellent light-absorbing efficiency of over 95% within the whole solar spectrum range, enabling a high evaporation efficiency of 88.0% under a low solar irradiation of 1.0 kW m^-2 and superhigh evaporation efficiencies of over 90% under a slightly enhanced solar irradiation of 1.5-3.0 kW m^-2 as well as a remarkable desalination performance. In addition, the excellent mechanical stability of this MoS₂ aerogel renders it to be reused for at least 10 cycles with stable water productivity. Because of its 3D architectures with high porosity and easy separation, this MoS₂-based aerogel also provides promising applications in solar-driven water purification, sterilization, and so forth.

Multi-edged molybdenite achieved by thermal modification for enhancing Pb(II) adsorption in aqueous solutions

Thermal modification was simply performed on molybdenite to enhance the adsorption of Pb(II) in aqueous solutions, and the root of this phenomenon was well studied in this work. Various thermal modification temperatures at 300 °C, 400 °C and 500 °C were applied to modify the surface property of molybdenite, producing different degrees of edge defect and surface wettability in molybdenite samples. Contact angle tests, atomic force microscopy (AFM) observations and adsorption tests illustrated that molybdenite thermally modified at 400 °C contained most edge defects and achieved a 147.846 mg/g Pb(II) adsorption, which was almost 10 times of that obtained by natural molybdenite. The adsorption experiment also indicated that the increase of surface hydrophilia of molybdenite would slightly benefit the Pb(II) adsorption. The X-ray photoelectron spectroscope (XPS) exhibited that a strong chemical adsorption existed between Pb(II) and S elements. AFM study further demonstrated that the interaction between Pb(II) and S atoms exposed at the triangular edges of molybdenite were the intrinsic reason for the great enhancement of Pb(II) adsorption. This work provides a new insight to absorb Pb(II) in aqueous solutions using natural molybdenite.

Efficient As(III) Removal by Novel MoS2-Impregnated Fe-Oxide-Biochar Composites: Characterization and Mechanisms

Sorbents that efficiently eliminate toxic metal(loid)s from industrial wastes are required for the protection of the environment and human health. Therefore, we demonstrated efficient As(III) removal by novel, eco-friendly, hydrothermally prepared MoS₂-impregnated FeO _x @BC800 (MSF@BC800). The properties and adsorption mechanism of the material were investigated by X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller analysis, X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The synergistic effects of FeO _x and MoS₂ on MSF@BC800 considerably enhanced As(III)-removal efficiency to ≥99.73% and facilitated superior As(III) affinity in aqueous solutions (K _d ≥ 10⁵ mL g^-1) compared to those of FeO _x @BC800 and MS@BC800, which showed 37.07 and 17.86% As(III)-removal efficiencies and K _d = 589 and 217 mL g^-1, respectively, for an initial As(III) concentration of ∼10 mg L^-1. The maximum Langmuir As(III) sorption capacity of MSF@BC800 was 28.4 mg g^-1. Oxidation of As(III) to As(V) occurred on the MSF@BC800 composite surfaces. Adsorption results agreed with those obtained from the Freundlich and pseudo-second-order models, suggesting multilayer coverage and chemisorption, respectively. Additionally, MSF@BC800 characteristics were examined under different reaction conditions, with temperature, pH, ionic strength, and humic acid concentration being varied. The results indicated that MSF@BC800 has considerable potential as an eco-friendly environmental remediation and As(III)-decontamination material.

Highly efficient removal of Cr(VI) from water based on graphene oxide incorporated flower-like MoS2 nanocomposite prepared in situ hydrothermal synthesis

An efficient adsorbent for the treatment of Cr(VI) was simply fabricated by combining graphene oxide with MoS₂ nanosheets via in situ hydrothermal process with CTAB as the surfactant. The experimental results indicated that the agglomeration of the MoS₂ nanosheets are reduced and uniformly grown on the graphene sheet during the in situ hydrothermal process, and the introduction of graphene oxide provided higher specific surface area and abundant oxygenic groups. Based on this, the removal efficiency of Cr(VI) onto MoS₂/rGO was 75.9% at pH 2.0, which was higher than that of bulk MoS₂ (61.0%). On account of Sips adsorption isotherm model, the highest uptake capacity of MoS₂/rGO toward Cr(VI) reached 80.8 mg g^-1. The adsorption kinetic consequences showed that the chemisorption process was the control step, and the removal mechanism for Cr(VI) is redox and adsorption; in this way, the adsorbed Cr(VI) was partially reduced to Cr(III). Furthermore, this as-prepared adsorbent also presented satisfying reusability for removal of Cr(VI) and can be used for the selective removal of Cr(VI) in the presence of NO₃^-. In short, it may provide a potential route to enhance the adsorption property of MoS₂ toward heavy metals through incorporating with GO, which would expand the applications of MoS₂ in the field of treatment of the heavy metal wastewater.

High-performance two-dimensional montmorillonite supported-poly(acrylamide-co-acrylic acid) hydrogel for dye removal

High-performance two-dimensional montmorillonite supported-poly (acrylamide-co-acrylic acid) hydrogel for dye removal was investigated. Montmorillonite cooperated with acrylamide and acrylic acid via polymerization, hydrogen-bond, amidation and electrostatic interactions to form the three-dimensional reticular-structured hydrogel with the free entrance for macromolecules. Adsorption tests revealed that the efficient removal (97%) for methylene blue at high concentration (200 mg/L) could be achieved via a small dose of hydrogel (0.5 g/L) within a short time (20 min). The excellent adsorption performance was profited from the electronegative surface and fully exposed reaction sites of two-dimensional montmorillonite, which could save the treatment cost and promote the removal effect compared with the conventional adsorbents. The adsorption process of methylene blue onto hydrogel could be fitted by both the pseudo-first-order and pseudo-second-order kinetics models, and the adsorption isotherm corresponded to the Sips model. The mechanism analysis based on Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy measurements illustrated that the reaction between carboxyl groups and methylene blue molecules as well as the cation-exchange enabled the hydrogel performing extraordinary adsorption efficiency.

A novel and biocompatible Fe3O4 loaded chitosan polyelectrolyte nanoparticles for the removal of Cd2+ ion

In this work, Fe₃O₄ loaded chitosan (CS) nanoparticles (NPs) and microparticles (MPs) were synthesized based on ionic gelation technology for the removal of Cd²⁺ ion. The influencing parameters including initial concentration, pH, contact time and recycling was evaluated and optimized. The results showed that particle size of Fe₃O₄ loaded CS NPs and MPs was in the range of 164.05-768.69 nm, and the former showed relatively higher adsorption capacities (97.86 mg/g) on Cd²⁺ ion than the latter after 90 min at pH 5.0 for the solutions with initial Cd²⁺ ion of 100 mg/L, respectively. Brunauer, Emmett and Teller (BET) test illustrated 61.48 m²/g of specific surface area, 0.0274 cm³/g of pore volume and 6.03 nm average pore size. The results of FT-IR, TEM, EDS and XRD indicated that Fe₃O₄ was well incorporated into CS NPs and MPs. Moreover, the adsorption equilibrium data fitted well with Langmuir isotherm model and adsorption process followed the pseudo-second-order model. The adsorption mechanisms could be well explained though coordination and electrostatic attraction. Findings of this work highlighted the potential using Fe₃O₄ loaded CS NPs as an effective and recyclable adsorbent for the removal of heavy metal ions in industrial wastewater treatment.