The role of magnetite/graphene oxide nano-composite as a high-efficiency adsorbent for removal of phenazopyridine residues from water samples, an experimental/theoretical investigation

Characterizing graphene oxide waste stream and assessing its impact on anaerobic co-digestion with municipal sludge

This study evaluated anaerobic co-digestion as a promising strategy for managing organic-contaminated waste streams generated from nanomaterial synthesis. The novel approach enabled precise quantification of organic content, efficient biomethane recovery, and a sustainable redirection of ethanol-contaminated graphene oxide (GO) dispersions. The proposed method achieved high accuracy (93-97%) in detecting organic content in ethanol-contaminated GO dispersions, significantly outperforming the conventional total chemical oxygen demand (tCOD) method, which only reached 75-77% accuracy. Additionally, co-digestion of trace ethanol content in GO dispersions with municipal sludge substantially enhanced methane production kinetics, resulting in a 17.6% increase in specific methane yield (per tCOD added) and a 284% increase in total methane production. Parallel anaerobic digestion (AD) experiments using conductive GO nanosheets (without ethanol) revealed the synergistic impact of GO nanosheets and trace ethanol content as a key mechanism driving these improvements. Furthermore, the study provided evidence of the biological reduction of GO and its magnetite-decorated counterpart, magnetic GO, as indicated by a shift in the ID/IG ratio from 1.06 to 0.77 and a G-band shift from 1606 cm⁻1-1565 cm⁻1. This reduction decreased the stability of nanosheets in the AD liquid phase, promoting their partitioning into the solid phase. This process facilitates the adsorption of the GO phase within the digestate and allows for the slow release of micronutrients when used as soil amendments.

Removal of phenazopyridine from water, synthetic urine, and real sample by adsorption using graphene oxide: A DFT theoretical/experimental approach

Herein, graphene oxide was used as the highly efficient phenazopyridine adsorbent from aqueous medium, synthetic, and human urine. The nanoadsorbent was characterized by different instrumental techniques. The adsorption capacity (1253.17 mg g-1) was reached at pH 5.0, using an adsorbent dosage of 0.125 g L-1 at 298 K. The Sips and Langmuir described the equilibrium data well. At the same time, the pseudo-second order was more suitable for fitting the kinetic data. Thermodynamic parameters revealed the exothermic nature of adsorption with an increase in randomness at the solid-liquid interface. The magnitude of the enthalpy variation value indicates that the process involves the physisorption phenomenon. At the same time, ab initio molecular dynamics data corroborated with the thermodynamic results, indicating that adsorbent and adsorbate establish hydrogen bonds through the amine groups (adsorbate) and hydroxyl groups on the adsorbent surface (weak interactions). Electrostatic interactions are also involved. Additionally, the adsorption assays conducted in simulated medium and human urine showed the excellent performance of adsorbent material to remove the drug in real concentrations excreted by the kidneys (removal values higher than 60%).

Ultralow Detection of Mancozeb Using Two-Dimensional Cobalt Telluride (CoTe2)

Pesticides are crucial in modern agriculture because they reduce pests and boost yield, but they also represent major risks to human health and the environment; therefore, it is important to monitor their presence in food. Reliable and precise detection techniques are possible ways to address this issue. In this work, we utilize atomically thin (two-dimensional) cobalt telluride (CoTe2) with a high surface area and charge as a template material to detect mancozeb using spectroscopic and electrochemical techniques. When mancozeb (MNZ) molecules interact with 2D CoTe2, spectroscopic analyses reveal distinctive spectral shifts that clarify the underlying chemical interactions and binding mechanisms. Furthermore, CoTe2's electroactive sites and their manipulation for improved sensitivity and selectivity toward certain MNZ molecules are investigated by electrochemical studies. The CoTe2/GCE electrode exhibits enhanced electrochemical activity toward the electrooxidation of MNZ. The developed sensing electrode shows a linear range from 0.184 mM to 18.48 μM and a limit of detection of about 0.18 μM. In addition, we employ density functional theory (DFT) first-principles calculations to validate the experimental findings and comprehend the mechanism behind the interaction between CoTe2 and MNZ molecules. The study highlights the effectiveness of 2D CoTe2 as a dual-mode sensing platform for qualitative and quantitative assessment of MNZ pollutants, demonstrated by the integration of electrochemistry and spectroscopy and the critical role that 2D CoTe2-based sensors can play in accurate and efficient pesticide detection, which is required for agricultural safety protocols and environmental monitoring.

Statistical physical modeling insights for urinary analgesic drug adsorption on carbon nanomaterial derivative

The presence of phenazopyridine in water is an environmental problem that can cause damage to human health and the environment. However, few studies have reported the adsorption of this emerging contaminant from aqueous matrices. Furthermore, existing research explored only conventional modeling to describe the adsorption phenomenon without understanding the behavior at the molecular level. Herein, the statistical physical modeling of phenazopyridine adsorption into graphene oxide is reported. Steric, energetic, and thermodynamic interpretations were used to describe the phenomenon that controls drug adsorption. The equilibrium data were fitted by mono, double, and multi-layer models, considering factors such as the numbers of phenazopyridine molecules by adsorption sites, density of receptor sites, and half saturation concentration. Furthermore, the statistical physical approach also calculated the thermodynamic parameters (free enthalpy, internal energy, Gibbs free energy, and entropy). The maximum adsorption capacity at the equilibrium was reached at 298 K (510.94 mg g-1). The results showed the physical meaning of adsorption, indicating that the adsorption occurs in multiple layers. The temperature affected the density of receptor sites and half saturation concentration. At the same time, the adsorbed species assumes different positions on the adsorbent surface as a function of the increase in the temperature. Meanwhile, the thermodynamic functions revealed increased entropy with the temperature and the equilibrium concentration.

Occurrence and fate of pharmaceutical pollutants in wastewater: Insights on ecotoxicity, health risk, and state-of-the-art removal

Pharmaceutical active compound (PhAC) residues are considered an emerging micropollutant that enters the aquatic environment and causes harmful ecotoxicity. The significant sources of PhACs in the environment include the pharmaceutical industry, hospital streams, and agricultural wastes (animal husbandry). Recent investigations demonstrated that wastewater treatment plants (WWTPs) are an important source of PhACs discharging ecosystems. Several commonly reported that PhACs are detected in a range level from ng L-1 to μg L-1 concentration in WWTP effluents. These compounds can have acute and chronic adverse impacts on natural wildlife, including flora and fauna. The approaches for PhAC removals in WWTPs include bioremediation, adsorption (e.g., biochar, chitosan, and graphene), and advanced oxidation processes (AOPs). Overall, adsorption and AOPs can effectively remove PhACs from wastewater aided by oxidizing radicals. Heterogeneous photocatalysis has also proved to be a sustainable solution. Bioremediation approaches such as membrane bioreactors (MBRs), constructed wetlands (CWs), and microalgal-based systems were applied to minimize pharmaceutical pollution. Noteworthy, applying MBRs has illustrated high removal efficiencies of up to 99%, promising prospective future. However, WWTPs should be combined with advanced solutions, e.g., AOPs/photodegradation, microalgae-bacteria consortia, etc., to treat and minimize their accumulation. More effective and novel technologies (e.g., new generation bioremediation) for PhAC degradation must be investigated and specially designed for a low-cost and full-scale. Investigating green and eco-friendly PhACs with advantages, e.g., low persistence, no bioaccumulation, less or non-toxicity, and environmentally friendly, is also necessary.

PLA/CS-ZnO bionanocomposite for rapid catalytic reduction of nitrophenol compounds as a heterogeneous nanocatalyst

In this research, a high efficiency and environmentally friendly method to reduce nitrophenol compounds such as 4-nitrophenol (4-NP), 2,4,6-trinitrophenol (2,4,6-TNP) and 2,4-dinitrophenol (2,4-DNP) was used in the presence of poly(lactic acid)/chitosan-ZnO ( PLA/CS-ZnO) bionanocomposite. Using FT-IR, SEM, XRD and UV-Vis techniques, PLA/CS-ZnO bionanocomposite was identified after synthesis. Also, the mechanical properties of the bionanocomposite were investigated using the stress-strain curve. The mentioned bionanocomposite showed a very good efficiency in reducing nitrophenol compounds to aminophenolic compounds, so that under optimal conditions, 100% conversion and selectivity in the reduction of 4-NP, 2,4,6-TNP and 2,4-DNP to 4-aminophenol (4-AP), 2,4,6-triaminophenol (2,4,6-TAP) and 2,4-diaminophenol (2,4-DAP) were observed. UV-Vis absorption spectrum at different times were used to evaluate the progress of the reaction. Furthermore, after the reaction, PLA/CS-ZnO was recovered and used for the next cycle. The results showed that the bionanocomposite can perform ten consecutive cycles without a significant decrease in efficiency. The comparison of catalytic activity with other catalysts showed that the bionanocomposite synthesized in the present research has a higher efficiency in reduction of nitrophenol compounds.

An Updated Overview of Magnetic Composites for Water Decontamination

Water contamination by harmful organic and inorganic compounds seriously burdens human health and aquatic life. A series of conventional water purification methods can be employed, yet they come with certain disadvantages, including resulting sludge or solid waste, incomplete treatment process, and high costs. To overcome these limitations, attention has been drawn to nanotechnology for fabricating better-performing adsorbents for contaminant removal. In particular, magnetic nanostructures hold promise for water decontamination applications, benefiting from easy removal from aqueous solutions. In this respect, numerous researchers worldwide have reported incorporating magnetic particles into many composite materials. Therefore, this review aims to present the newest advancements in the field of magnetic composites for water decontamination, describing the appealing properties of a series of base materials and including the results of the most recent studies. In more detail, carbon-, polymer-, hydrogel-, aerogel-, silica-, clay-, biochar-, metal-organic framework-, and covalent organic framework-based magnetic composites are overviewed, which have displayed promising adsorption capacity for industrial pollutants.

Nanomaterial-amended anaerobic sludge digestion: Effect of pH as a game changer

Using nanomaterials as supplements in batch-fed anaerobic digestion (AD) has led to conflicting results in the literature, warranting the need for a standardized approach. Here, we investigate the role of pH in AD by performing batch biochemical methane potential (BMP) assays utilizing municipal sludge under two conditions: optimal initial pH (≈ 7.5) and elevated initial pH (≈ 9). We also examine the effects of synthesized nanomaterials, e.g., graphene oxide (GO), magnetite, magnetic GO, and magnetic reduced GO (MrGO), with different surface functionalities on BMP performance under these pH conditions. Our results show that the AD system is sensitive to pH, with the ultimate BMP reached much earlier at the neutral pH condition (20 days (d)) than at the elevated pH condition (45 d). Furthermore, the effects of nanomaterials on BMPs are pH-dependent, with MrGO improving the BMP rate by 56% on the onset of the plateau in the methane production graph at the neutral pH, while the BMP rate decreased by 14% at the same time scale at the elevated pH. Our findings demonstrate the need for standardized methods and highlight the importance of closely monitoring pH in future studies on nanomaterials-amended AD systems.

Adsorption Efficiency of Carbon Materials for the Removal of Organic Pollutants: DDT from Aqueous Solution

Carbon nanotubes (CNTs) are widely used to adsorb organic pollutants from wastewater due to their porous structure, large specific surface area, and unique physical and chemical properties. Examining the interactions between pollutant molecules and carbon nanotubes is an important topic in the applications of nanotubes for the removal of pollutants. In this study, molecular dynamics (MD) and metadynamics simulations were used to investigate the adsorption mechanism of Dichlorodiphenyltrichloroethane (DDT) pollutants on carbon nanotubes. Obtained results revealed that functionalized CNTs (f-CNTs) with active groups exhibited significantly enhanced performance compared to pristine CNTs. The adsorption isotherms were analyzed at different DDT concentrations, and it was found that increasing the concentration of DDT molecules led to a decrease in system energy and increased stability. The presence of biosurfactants as functional groups on the CNTs enhanced the interaction between DDT molecules and the nanotubes. In CNT, the addition of DDT increases the van der Waals energy from -176.83 kJ/mol for 3 DDT molecules to -2237.88 kJ/mol for 50 DDT molecules. In the case of f-CNT, the van der Waals energy in the system with 50 DDT molecules is about 2061.05 kJ/mol more negative than the system with 3 DDT molecules. The number of contacts between the adsorbent and DDT molecules increased over time, indicating increased adsorption interaction. The radial distribution functions (RDF) of DDT molecules around CNTs and f-CNTs showed the highest probability of finding DDT molecules at a distance of about 0.5 nm from the adsorbent surface. The study provided valuable insights into the adsorption process and can guide future experimental studies.

Nanotechnology-assisted treatment of pharmaceuticals contaminated water

The presence of pharmaceutical compounds in wastewater due to an increase in industrialization and urbanization is a serious health concern. The demand for diverse types of pharmaceutical compounds is expected to grow as there is continuous improvement in the global human health standards. Discharge of domestic pharmaceutical personal care products and hospital waste has aggravated the burden on wastewater management. Further, the pharmaceutical water is toxic not only to the aquatic organism but also to terrestrial animals coming in contact directly or indirectly. The pharmaceutical wastes can be removed by adsorption and/or degradation approach. Nanoparticles (NPs), such as 2D layers materials, metal-organic frameworks (MOFs), and carbonaceous nanomaterials are proven to be more efficient for adsorption and/or degradation of pharmaceutical waste. In addition, inclusion of NPs to form various composites leads to improvement in the waste treatment efficacy to a greater extent. Overall, carbonaceous nanocomposites have advantage in the form of being produced from renewable resources and the nanocomposite material is biodegradable either completely or to a great extent. A comprehensive literature survey on the recent advancement of pharmaceutical wastewater is the focus of the present article.

Impact of the Configurational Microstructure of Carboxylate-Rich Chitosan Beads on Its Adsorptive Removal of Diclofenac Potassium from Contaminated Water

A novel adsorbent-contaminant system was investigated for its ability to remove a contaminant of emerging concern, diclofenac potassium, from contaminated water. Bio-based crosslinked chitosan beads functionalized with poly(itaconic acid) side chains were examined for their potential to remove the emerging contaminant. To evaluate the impact of the polymeric microstructure on its adsorptive capacity, several adsorbent samples were prepared using different combinations of initiator and monomeric concentrations. Fourier Transform Infrared (FTIR) analysis confirmed the crosslinking of the chitosan chains and the incorporation of the carboxylic groups on the surface of the final chitosan beads. After the grafting copolymerization process, an additional peak at 1726 cm-1 corresponding to the carboxylic C=O groups of the grafted chains appeared, indicating the successful preparation of poly(IA)-g-chitosan. Thermal stability studies showed that the grafting copolymerization improved the thermal stability of the beads. X-ray and Scanning Electron Microscopy confirmed the successful grafting of the itaconic acid on the surface of the beads. The study revealed that the higher the initiator concentration, the greater the number of side chains, whereas the higher the monomeric concentration, the longer the length of these side chains. The adsorption mechanism involved hydrogen bonding to the carboxylic groups of the grafted chains along with n-π* stacking interaction between the amino group of the chitosan and the aromatic rings of diclofenac potassium. The adsorption efficiencies of diclofenac potassium onto the grafted beads were significantly improved compared to the unfunctionalized chitosan beads, reaching values above 90%. The removal efficiency of grafted chitosan increased with an increase in the concentration in the range of 10-30 ppm and then flattened out in the range of 30-50 ppm. The removal efficiencies of 1-50 ppm of DCF ranged between about 75% and 92% for the grafted chitosan and 30-45% for the crosslinked chitosan. Rapid adsorption occurred within 20 min for all grafted sample combinations, and the adsorption kinetics followed a pseudo-second-order model with qe values ranging from 28 to 44.25 g/mg and R2 values greater than 0.9915. The results highlight the potential of grafted chitosan beads in removing emerging contaminants from contaminated water without harming the environment.

Recent Advances in Sources of Bio-Inspiration and Materials for Robotics and Actuators

Bionic robotics and actuators have made dramatic advancements in structural design, material preparation, and application owing to the richness of nature and innovative material design. Appropriate and ingenious sources of bio-inspiration can stimulate a large number of different bionic systems. After millennia of survival and evolutionary exploration, the mere existence of life confirms that nature is constantly moving in an evolutionary direction of optimization and improvement. To this end, bio-inspired robots and actuators can be constructed for the completion of a variety of artificial design instructions and requirements. In this article, the advances in bio-inspired materials for robotics and actuators with the sources of bio-inspiration are reviewed. The specific sources of inspiration in bionic systems and corresponding bio-inspired applications are summarized first. Then the basic functions of materials in bio-inspired robots and actuators is discussed. Moreover, a principle of matching biomaterials is creatively suggested. Furthermore, the implementation of biological information extraction is discussed, and the preparation methods of bionic materials are reclassified. Finally, the challenges and potential opportunities involved in finding sources of bio-inspiration and materials for robotics and actuators in the future is discussed.

Adsorption of chloroquine, propranolol, and metformin in aqueous solutions using magnetic graphene oxide nanocomposite

The work proposes the application of a nanocomposite formed by graphene oxide and magnetite to remove chloroquine, propranolol, and metformin from water. Tests related to adsorption kinetics, equilibrium isotherms and adsorbent reuse were studied, and optimization parameters related to the initial pH of the solution and the adsorbent dosage were defined. For all pharmaceuticals, adsorption tests indicated that removal efficiency was independent of initial pH at adsorbent dosages of 0.4 g L-1 for chloroquine, 1.2 g L-1 for propranolol, and 1.6 g L-1 for metformin. Adsorption equilibrium was reached within the first few minutes, and the pseudo-second-order model represented the experimental data well. While the equilibrium data fit the Sips isotherm model at 298 K, the predicted maximum adsorption capacities for chloroquine, propranolol, and metformin were 44.01, 16.82, and 12.23 mg g-1, respectively. The magnetic nanocomposite can be reused for three consecutive cycles of adsorption-desorption for all pharmaceuticals, being a promising alternative for the removal of different classes of pharmaceuticals in water.

Modeling of adsorptive removal of azithromycin from aquatic media by CoFe2O4/NiO anchored microalgae-derived nitrogen-doped porous activated carbon adsorbent and colorimetric quantifying of azithromycin in pharmaceutical products

Herein, it was aimed to optimize the removal process of Azithromycin (Azi) from the aquatic environment via CoFe2O4/NiO nanoparticles anchored onto the microalgae-derived nitrogen-doped porous activated carbon (N-PAC), besides developing a colorimetric method for the swift monitoring of Azi in pharmaceutical products. In this study, the Spirulina platensis (Sp) was used as a biomass resource for fabricating CoFe2O4/NiO@N-PAC adsorbent. The pores of N-PAC mainly entail mesoporous structures with a mean pore diameter of 21.546 nm and total cavity volume (Vtotal) of 0.033578 cm3. g-1. The adsorption studies offered that 98.5% of Azi in aqueous media could remove by CoFe2O4/NiO@N-PAC. For the cyclic stability analysis, the adsorbent was separated magnetically and assessed at the end of five adsorption-desorption cycles with a negligible decrease in adsorption. The kinetic modeling revealed that the adsorption of Azi onto the CoFe2O4/NiO@N-PAC was well-fitted to the second-order reaction kinetics, and the highest adsorption capacity was found as 2000 mg. g-1 at 25 °C based on the Langmuir adsorption isotherm model at 0.8 g. L-1 adsorbent concentration. The Freundlich isotherm model had the best agreement with the experimental data. Thermodynamic modeling indicated the spontaneous and exothermic nature of the adsorption process. Moreover, the effects of pH, temperature, and operating time were also optimized in the colorimetric Azi detection. The blue ion-pair complexes between Azi and Coomassie Brilliant Blue G-250 (CBBG-250) reagent followed Beer's law at wavelengths of 640 nm in the concentration range of 1.0 μM to 1.0 mM with a 0.94 μM limit of detection (LOD). In addition, the selectivity of Azi determination was verified in presence of various species. Furthermore, the applicability of CBBG-250 dye for quantifying Azi was evaluated in Azi capsules as real samples, which revealed the acceptable recovery percentage (98.72-101.27%). This work paves the way for engineering advanced nanomaterials for the removal and monitoring of Azi and assures the sustainability of environmental protection and public health.

A sensitive enzyme-free electrochemical sensor based on a rod-shaped bimetallic MOF anchored on graphene oxide nanosheets for determination of glucose in huangshui

In this work, we propose a bimetallic Ni-Co based MOF attached to graphene oxide (GO) by a one-step hydrothermal approach which may be employed as an electrochemical enzyme-free glucose sensor. Due to the obvious synergistic catalysis of Ni and Co, as well as the combination of NiCo-MOF and GO, NiCo-MOF/GO not only enhances energy transfer and electrocatalytic performance but also provides a larger surface area and more active sites. Electrochemical studies show that NiCo-MOF/GO exhibits outstanding electrochemical activity, with a sensitivity of 11 177 μA mM^-1 cm^-2 and 4492 μA mM^-1 cm^-2 in the linear ranges of 1-497 μM and 597-3997 μM, a detection limit of 0.23 μM, and a response time of 2 seconds. More importantly, the newly fabricated sensor is successfully applied for glucose determination in huangshui. This method provides a novel strategy for the controlled fermentation process and product quality of Chinese baijiu.

Removal of Ciprofloxacin from Water by a Potassium Carbonate-Activated Sycamore Floc-Based Carbonaceous Adsorbent: Adsorption Behavior and Mechanism

In this study, a porous carbonaceous adsorbent was prepared from sycamore flocs by pyrolysis method and K₂CO₃ activation. The effects of preparative conditions of the material on its adsorptive property were explored. The optimal material (SFB_2-900) was obtained with a K₂CO₃/biochar mass ratio of 2:1 at an activation temperature of 900 °C, possessing a huge surface specific area (1651.27 m²/g). The largest adsorption capacity for ciprofloxacin on SFB_2-900 was up to 430.25 mg/g. The adsorption behavior was well described by the pseudo-second-order kinetic model and the Langmuir isothermal model. Meanwhile, this process was spontaneous and exothermic. The obtained material showed excellent adsorption performance in the conditions of diverse pH range, ionic strength, and water quality of the solution. The optimum adsorption conditions (pH = 7.01, dosage = 0.6 g/L, and C₀ = 52.94 mg/L) determined based on the response surface methodology were in accordance with the practical validation consequences. The good regeneration effect of SFB_2-900 manifested that this material had great practical application potential. Combining the experimental results and density functional theory calculation results, the adsorption mechanisms mainly included pore filling, π-π EDA interactions, electrostatic interactions, and H-bonds. The material could be regarded as a novel and high-efficiency adsorbent for antibiotics. Additionally, these findings also provide reference for the reuse of waste biomass in water treatment.

The elimination and extraction of organosulfur compounds from real water and soil samples using metal organic framework/graphene oxide as a novel and efficient nanocomposite

In the present work, an efficient metal organic framework/graphene oxide (MOF-801/GO) sorbent was fabricated and employed for the detection of organosulfur pesticides (OSPs) in real samples using gas chromatography-flame photometric detection (GC-FPD). The optimal extraction parameters for the suggested solid-phase extraction (SPE) include sorbent amount (60 mg), extraction solvent (acetonitrile) and extraction time (5 min). The linear dynamic ranges and detection limits for organosulfur pesticides (OSPs) samples under above extraction conditions were ranged from 0.5 to 300 μg L^-1 and 0.1-1.1 μg L^-1, respectively. Moreover, the proposed SPE/GC-FDP method was applied for the analysis of pesticides in different real environmental water and soil samples. The obtained recoveries of the analytes in were between 92.0 and 106.8% and relative standard deviation (RSD) values were lower than 9.2%. The application of the MOF-801/GO as a sorbent in dSPE of OSPs analytes showed to be reliable, fast and sensible methodology for pesticides monitoring in different environmental samples.

Selective Adsorption of Direct Group Anionic Dyes on Layered Double Hydroxide-Chitosan Composites

In this research, the potential of M2+/Al intercalated chitosan has been evaluated and good ability to reduce dyes in an aqueous solution. M2+/Al intercalated chitosan was prepared by anion exchange method and coprecipitation in a nitrogen atmosphere. Selectivity adsorption was studied to maintain the ability of M2+/Al intercalated chitosan for particle size of direct dyes (direct green, direct red, and direct yellow). To evaluate the adsorption process, M2+/Al intercalated chitosan was conducted with kinetic, isotherm, and thermodynamic parameters. The kinetic data fitted well by pseudo-second order and isotherm fitted Langmuir isotherm with qmax obtained 294.11 and 322.58 mg/g for Zn/Al-chitosan and Mg/Al-chitosan, respectively. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Preconcentrations of Pb(II), Ni(II) and Zn(II) by solid phase bio-extractor using thermophilic Bacillus subtilis loaded multiwalled carbon nanotube biosorbent

An alternative biotechnological solid phase bio-extraction (SPE) method was developed. Bacillus subtilis loaded multiwalled carbon nanotube was designed and used as biosorbent for the preconcentrations of Pb(II), Ni(II), and Zn(II). The experimental parameters such as sample flow rate, pH of sample solution, amounts of Bacillus subtilis and multiwalled carbon nanotube, volume of sample solution and reusability of column which affects the analytical characteristics of the SPE method were investigated in details. Surface structures were examined by using FTIR, SEM. The best pH was determined as 5.0 and the percentages recoveries of Zn(II), Ni(II), and Pb(II) were determined as 99.1%, 98.7%, and 96.2%, respectively, at a flow rate of 3 mL/min. In this study, in which the profitable sample volume was determined as 400 mL and the amount of multiwalled carbon nanotube (MWCNT) as 50 mg. It was also observed that the column had a significant potential to preconcentrate Zn(II), Ni(II), and Pb(II) even after 25 reuses. The biosorption capacities for Zn(II), Ni(II) and Pb(II) were calculated as 39.67 mg/g, 45.98 mg/g and 51.34 mg/g respectively. The LOD values were calculated as 0.024 ng/mL for Pb(II), 0.029 ng/mL for Ni(II), and 0.019 ng/mL for Zn(II). The linear range was detected as 0.25-25 ng/mL. The concentrations of Pb(II), Ni(II), and Zn(II) in a variety of real food samples were determined by using developed method after application of certified reference sample.

Enhancement of electrode properties using carbon dots functionalized magnetite nanoparticles for azo dye decolorization in microbial fuel cell

Technology integration of nanomaterials with microbial fuel cell (MFC) have led to simultaneous degradation of recalcitrant dyes and energy extraction from textile wastewater. Limited electron transfer capacity and hydrophobicity of electrode are the bottlenecks for enhancing the performance of MFC. Nanomaterials can provide surface functionalities for electron transfers and serve as catalyst for pollutant degradation. In this paper, magnetite nanoparticles functionalized with carbon dots (Fe₃O₄@CDs) were used to enhance the electron transfer capacity of the electrodes due to numerous surface-active functional groups of CDs and the reversible redox reaction of Fe²⁺/Fe³⁺. Polydopamine (PDA) was used as binder to coat Fe₃O₄@CDs onto the surface of carbon felt (CF) electrodes in a sono-chemical reaction, favoring to form biocompatible electrodes. Charge transfer resistance of Fe₃O₄@CDs@PDA-CF was 5.02Ω as compared to 293.34Ω of unmodified CF. Fe₃O₄@CDs@PDA-CF installed MFC could achieve almost 98% dye degradation efficiency within 48 h and 18.30 mW m^-2 power output as compared to 77% dye degradation and 0.34 mW m^-2 power output by unmodified CF electrode MFC. Moreover, metagenomic analysis of microbial consortia developed in Fe₃O₄@CDs@PDA-CF MFC showed enrichment of electrogenic and dye degrading microbial communities of Achromobacter. Delftia, Geobacter and Pseudomonas.

Biotechnological advancements towards water, food and medical healthcare: A review

The global health status is highly affected by the growing pace of urbanization, new lifestyles, climate changes, and resource exploitation. Modern technologies pave a promising way to deal with severe concerns toward sustainable development. Herein, we provided a comprehensive review of some popular biotechnological advancements regarding the progress achieved in water, food, and medicine, as the most substantial fields related to public health. The emergence of novel organic/inorganic materials has brought about significant improvement in conventional water treatment techniques, anti-fouling approaches, anti-microbial agents, food processing, biosensors, drug delivery systems, and implants. Particularly, a growing interest has been devoted to nanomaterials and their application for developing novel structures or improving the characteristics of standard components. Also, bioinspired materials have been widely used to improve the performance, efficiency, accuracy, stability, safety, and cost-effectiveness of traditional systems. On the other side, the fabrication of innovative devices for precisely monitoring and managing various ecosystem and human health issues is of great importance. Above all, exceptional advancements in designing ion-selective electrodes (ISEs), microelectromechanical systems (MEMs), and implantable medical devices have altered the future landscape of environmental and biomedical research. This review paper aimed to shed light on the wide-ranging materials and devices that have been developed for health applications and mainly focused on the impact of nanotechnology in this field.

Heterogeneous Cu2O-Au nanocatalyst anchored on wood and its insight for synergistic photodegradation of organic pollutants

In this study, a Cu₂O-Au nanoparticles (NPs) heterojunction catalyst anchored on wood was developed by in situ reduction and hydrothermal treatment, and the properties of the catalyst were systematically characterized. The catalyst exhibited prominent photocatalysis of methyl orange (MO, 0.169 min^{- 1}), and tetracycline (TC, 0.122 min^-1) which were degraded completely within 20 min. Even after four recyclings, the efficiency of MO degradation by the catalyst remained at 80%. The natural wood with three-dimensional porous structures acted as a reducing agent and a stabilizer for Au NPs and Cu₂O, which helped to maintain high performance and reusability. The presence of Au NPs mediated the light-induced electron transfer and enhanced the absorption of visible light for promoting photocatalytic activity. The intermediates of contaminants within the degradation process were characterized by liquid chromatography-mass spectrometry. Additionally, the photogenerated superoxide radicals and holes were identified by electron spin resonance. Thus, the potential degradation mechanism catalyzed by the Cu₂O-Au NPs-wood was proposed. This findings of this study valorizes biomass as a photocatalyst for wastewater remediation.

Photocatalytic assessed adsorptive removal of tinidazole from aqueous environment using reduced magnetic graphene oxide-bismuth oxychloride and its silver composite

Antibiotics (tinidazole (TNZ)) in wastewater, exhibit adverse effects on humans and ecosystem. The current study was aimed to synthesize photocatalysts mrGO/BiOCl and mrGO/BiOCl/Ag. mrGO was coupled with BiOCl by hydrothermal method and Ag was deposited over it. The synthesized mrGO/BiOCl and mrGO/BiOCl/Ag were confirmed by Pzc analysis (5.5 and 4.4 for mrGO/BiOCl and mrGO/BiOCl/Ag, respectively), surface area analysis (380 m² g^-1, 227.7 m² g^-1, 220 m² g^-1 for mrGO, mrGO/BiOCl and mrGO/BiOCl/Ag respectively), elemental analysis (Ag, O, Bi, Fe), surface morphology (rough ball like sphere of mrGO/BiOCl and cubic Ag nanoparticles in mrGO/BiOCl/Ag), functional groups and band gap (Eg) determination. The Eg was determined using Kubelka-Munk equation as 3.5 and 2.8 eV for mrGO/BiOCl and mrGO/BiOCl/Ag respectively. During the adsorption study, the best experimental conditions for various operating parameters such as pH (2), contact time (5 min for mrGO/BiOCl and 10 min for mrGO/BiOCl/Ag under UV irradiation), TNZ concentration (18 μgL^-1) and catalyst dosage (0.001 g) were achieved. Kinetic study revealed that both composites followed pseudo second order kinetics (R² = 0.9979 and 0.9986, respectively). Data of rGO/BiOCl was fitted to Freundlich adsorption model (R² = 0.9687) and rGO/BiOCl/Ag fitted to Langmuir adsorption model (R² = 0.9994). Moreover, thermodynamic parameters confirmed that a photodegradation phenomenon was spontaneous and exothermic. The results confirmed that rGO/BiOCl and rGO/BiOCl/Ag are appropriate composites for TNZ removal from the aqueous environment with removal efficiency of 97 and 24%, respectively.

Photocatalysis and adsorption kinetics of azo dyes by nanoparticles of nickel oxide and copper oxide and their nanocomposite in an aqueous medium

Background

Azo dyes are recalcitrant organic pollutants present in textile industry effluents. Conventional treatment methods to remove them come with a range of disadvantages. Nanoparticles and their nanocomposites offer more efficient, less expensive and easy to handle wastewater treatment alternative.

Methods

In this study, nanoparticles of nickel oxide (NiO-NPs), copper oxide (CuO-NPs) and their nanocomposite (NiO/CuO-NC) were synthesized using co-precipitation method. The functional groups present on the surface of synthesized nanomaterials were verified using Fourier-transform infrared spectroscopy (FTIR). Surface morphology was assessed using scanning electron microscopy (SEM) whereas purity, shape and size of the crystallite were determined using X-ray diffraction (XRD) technique. The potential of these nanomaterials to degrade three dyes i.e., Reactive Red-2 (RR-2), Reactive Black-5 (RB-5) and Orange II sodium salt (OII) azo dyes, was determined in an aqueous medium under visible light (photocatalysis). The photodegradation effectiveness of all nanomaterials was evaluated under different factors like nanomaterial dose (0.02-0.1 g 10 mL^-1), concentration of dyes (20-100 mg L^-1), and irradiation time (60-120 min). They were also assessed for their potential to adsorb RR-2 and OII dyes.

Results

Results revealed that at optimum concentration (60 mgL^-1) of RR-2, RB-5, and OII dyes, NiO-NPs degraded 90, 82 and 83%, CuO-NPs degraded 49, 34, and 44%, whereas the nanocomposite NiO/CuO-NC degraded 92, 93, and 96% of the said dyes respectively. The nanomaterials were categorized as the efficient degraders of the dyes in the order: NiO/CuO-NC > NiO-NPs > CuO-NPs. The highest degradation potential shown by the nanocomposite was attributed to its large surface area, small particles size, and quick reactions which were proved by advance analytical techniques. The equilibrium and kinetic adsorption of RR-2 and OII on NiO-NPs, CuO-NPs, and NiO/CuO-NC were well explained with Langmuir and Pseudo second order model, respectively (R² ≥ 0.96). The maximum RR-2 adsorption (103 mg/g) was obtained with NiO/CuO-NC. It is concluded that nanocomposites are more efficient and promising for the dyes degradation from industrial wastewater as compared with dyes adsorption onto individual NPs. Thus, the nanocomposite NiO/CuO-NC can be an excellent candidate for photodegradation as well as the adsorption of the dyes in aqueous media.

Fabrication of different adsorbents based on zirconium oxide, graphene oxide, and dextrin for removal of green malachite dye from aqueous solutions

In this study, graphene oxide and amine graphene were studied by binding to dextrin and zirconium oxide nanoparticles as adsorbent nanocomposites to the removal of dye. Identification and characterization of the synthesized materials were examined using FTIR, XRD, SEM, and BET analyses. Adsorption tests between adsorbents and green malachite (MG) dye solution for the synthesized nanocomposites were performed by considering parameters such as contact time, solution pH, and adsorbent dosage. The data indicated that dye removal increased with increasing the amount of adsorbent dosage. Increased dye removal by increasing the adsorbent dosage can be attributed to the increase of availability of the number of active sites. The active adsorption sites are saturated during the adsorption process, by the molecules of the adsorbate and filled over time. The results showed that the synthesized bio-composite had malachite green removal ability from aqueous media.

Separation of organic contaminant (dye) using the modified porous metal-organic framework (MIL)

Herein, the porous metal-organic framework (MIL-88B: Materials Institute Lavoisier) was synthesized and identified by FT-IR (Fourier transform infrared), SEM (Scanning Electron Microscopy), EDS (Energy Dispersive X-Ray Spectroscopy), and XRD (X-ray powder diffraction) analyses. Then MIL-88B was modified using 3-aminopropyl trimethoxy silane and presented as NH₂-MIL-88B. The synthesized materials were used to separate direct red dye 23 (DR23) as an organic contaminant from water. The effect of various important factors such as the amount of adsorbent, initial concentration of contaminants, and pH was investigated. The results showed that the modified adsorbent (NH₂-MIL-88B) had a higher adsorption capacity than the row adsorbent (MIL-88B). The amount of dye adsorption is high at lower pH values. The percentage of DR23 dye removal was complete under optimal conditions. Increasing the amount of adsorbent (0.001-0.003 g) and decreasing the pH (2.1-8.1) increases the percentage of dye removal and increasing the concentration of contaminant (50-125 mg/L) reduces the dye removal in the process. Isotherm data showed that the adsorption process followed the Langmuir model. Also, pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetic models were used to investigate the adsorption kinetics. Dye adsorption followed pseudo-second-order kinetics with correlation coefficient (0.99 <). The results showed that the modified adsorbent could be used as a suitable adsorbent with a high adsorption capacity for dye removal from water.

Silica-coated modified magnetic nanoparticles (Fe3O4@SiO2@(BuSO3H)3) as an efficient adsorbent for Pd2+ removal

It is crucial to fabricate cost-effective and efficient strategies for monitoring and eliminating hazardous metals in the water supplies. Among the many techniques, adsorption is one of the most powerful and facile ways for eliminating pollutants from effluents. It is also crucial to engineering high-performance low-cost adsorbents. In this regard, herein, Fe₃O₄@SiO₂@(BuSO₃H)₃ as a modified core-shell magnetic silica nanoparticle embodies good selectivity to extract toxic metal ions from aquatic media. The present work investigated the removal performance of the magnetic adsorbent towards Pd²⁺ cation amongst the other heavy metal ions including Co²⁺, Pb²⁺, Hg²⁺, Cd²⁺, Cu²⁺, Zn²⁺ in aqueous solution. The flame atomic absorption spectrometry (FAAS) was utilized to assess the removal efficiency of the adsorbent. Several experimental parameters including elution condition, initial Pd(II) concentration, adsorbent dosage, initial pH of the solution, and contact time were explored to achieve the optimal conditions. The data of adsorption were very well with the Langmuir isotherm model, according to the adsorption isotherm mechanism experiments. In conclusion, this study lays the way for the development of novel magnetic adsorbents with high removal efficiencies for the removal of toxic metal ions from aqueous environment.

Visible-light-driven photodegradation of organic pollutants by simply exfoliated kaolinite nanolayers with enhanced activity and recyclability

The need for abundant photocatalyst in wastewater treatment is currently a must. A simple intercalation process was utilized to exfoliate Kaolinite clay mineral structure Al₂Si₂O₅(OH)₄ into two-dimensional nanostructured separated layers operated in visible light range. The intercalating agents were hydrazine hydrate and urea. Detailed characterization confirmed the nanolayered structures of kaolinite hexagonal nanosheets (NK). In addition, Bandgap energy was reduced based on intercalating agents from 3.45 to 2.48 eV as revealed by light absorption spectra. The quenching of PL spectra for the nK has also been ascribed to the suppression of charge carrier recombination. The exfoliated nK was utilized to photodegrade Rhodamine B dye (RhB) and P-nitrophenol (PNP) as industrial pollutants in wastewater. The results showed 92.3% and 99.7% photodegradation of RhB and PNP within 180 min of visible-light irradiation utilizing the exfoliated NK by urea. We denote the boosted photocatalytic performance of this NK to the uncovered, low bandgap metal oxide inclusions on the exterior of NK besides the nitrogen doping due to exfoliation with urea. This simple exfoliation has modified abundant and stable clay nanolayers that are a promising alternative for the eminent nanostructured oxide photocatalysts to overcome the organic pollutants in wastewater at a high scale.

Shedding light on the performance of magnetically recoverable TiO2/Fe3O4/rGO-5 photocatalyst. Degradation of S-metolachlor as case study

Recalcitrant contaminants are not usually removed in conventional wastewater treatment plants. Therefore, they are transferred to the water resources that receive treated wastewaters and their presence can cause health and environmental issues. Herbicides are among these compounds. In particular, S-metolachlor (MTLC) is specifically of high concern because its molecule incorporates a chlorine atom that contributes to its toxicity. For its removal, a magnetically recoverable photocatalyst, TiO₂/Fe₃O₄/rGO-5, was synthesised following a hydrothermal method. The performance of TiO₂/Fe₃O₄/rGO-5 has been experimentally assessed and compared to TiO₂ and TiO₂/rGO-5 catalysts. A characterisation of the materials properties was carried out including adsorption isotherms of MTLC that provided the maximum adsorption capacity of the materials (q_m), being 140.85 ± 5.14 mg g^-1 for TiO₂/Fe₃O₄/rGO-5. Furthermore, the ternary composite exhibited good recoverability from liquid media after four consecutive cycles thanks to its magnetic character (magnetic saturation of 13.85 emu g^-1). Photocatalytic degradation of MTLC started after a dark adsorption step following first order kinetics (0.0197 ± 1.2 × 10^-4 min^-1 for the degradation of 100 mg L^-1 of MTLC with 0.5 g L^-1 of TiO₂/Fe₃O₄/rGO-5) similar to the rate of appearance of chloride in solution; after total removal of the solubilized MTLC the chloride concentration in the solution continued increasing with zero-th order kinetics up to the value corresponding to the total MTLC concentration. This second step in the chloride formation was attributed to the degradation of adsorbed MTLC. Specific experiments in the presence of scavengers of reactive oxygen species (ROS) were carried out shedding light on the degradation mechanisms. It was concluded the predominant role of free hydroxyl radicals in the photocatalytic degradation in all the investigated materials, whereas the presence of rGO in the composite photocatalysts improved their electronic conductivity, enhancing the activity of superoxide radicals. The results of this work provide important information for further development of photocatalysis.

Health Risk Assessment during In Situ Remediation of Cr(VI)-Contaminated Groundwater by Permeable Reactive Barriers: A Field-Scale Study

The presence of residual Cr(VI) in soils causes groundwater contamination in aquifers, affecting the health of exposed populations. Initially, permeable reactive barriers(PRB) effectively removed Cr(VI) from groundwater. However, as PRB clogging increased and Cr(VI) was released from upstream soils, the contamination plume continued to spread downstream. By 2020, the level of contamination in the downstream was nearly identical to that in the upstream. The study results show that during normal operation, the PRB can successfully remove Cr(VI) from contaminated groundwater and reduce the carcinogenic and non-carcinogenic risks to humans from the downstream side of groundwater. However, the remediated groundwater still poses an unacceptable risk to human health. The sensitivity analysis revealed that the concentration of the pollutant was the most sensitive parameter and interacted significantly with other factors. Ultimately, it was determined that the residual Cr(VI) in the soil of the study region continues to contaminate the groundwater and constitutes a serious health danger to residents in the vicinity. As remediated groundwater still poses a severe threat to human health, PRB may not be as effective as people believe.

Lignosulfonate valorization into a Cu-containing magnetically recyclable photocatalyst for treating wastewater pollutants in aqueous media

This study presents an eco-friendly and economical process for preparing a magnetic copper complex conjugated to modified calcium lignosulfonate (LS) through a diamine (Fe₃O₄@LS@naphthalene-1,5-diamine@copper complex; FLN-Cu) as a green and novel catalyst. The prepared catalyst was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), Brunauer-Emmett-Teller (BET), energy-dispersive X-ray spectroscopy (EDS), elemental mapping, inductively coupled plasma-optical emission spectrometry (ICP-OES) and field emission scanning electron microscopy (FESEM) techniques. The photocatalytic performance of the synthesized FLN-Cu catalyst was investigated by the degradation of aqueous solutions of dyes such as Rhodamine B (RhB), methylene blue (MB), and Congo red (CR) under UV irradiation. The dye degradation was followed by UV-Vis (ultraviolet-visible) spectrophotometry by measuring the changes in absorbance. The effects of different factors such as pH, contact time, photocatalyst dosage, and initial concentration of dye on the adsorption percentage were also investigated. Moreover, the catalyst showed high stability and could be readily separated from the reaction media using a magnet and reused five times without a remarkable loss of catalytic ability.

Surface magnetization of hydrolyzed Luffa Cylindrica biowaste with cobalt ferrite nanoparticles for facile Ni2+ removal from wastewater

A novel magnetic adsorbent based on hydrolyzed Luffa Cylindrica (HLC) was synthesized through the chemical co-precipitation technique, and its potential was evaluated in the adsorptive elimination of divalent nickel ions from water medium. Morphological assessment and properties of the adsorbent were performed using FTIR, SEM, EDX, XRD, BET, and TEM techniques. The effect of pH, temperature, time and nickel concentration on the removal efficiency was studied, and pH = 6, room temperature (25 °C), contact time of 60 min, and Ni²⁺ ion concentration of 10 mg.L^-1 were introduced as the optimal values. At optimal conditions, the removal efficiency of Ni²⁺ ions using HLC and HLC/CoFe₂O₄ magnetic composite was calculated as 96.38 and 99.13%, respectively. The adsorption process kinetic followed a pseudo-first-order model. Langmuir isotherm was suitable for modelling the experimental data of the Ni²⁺ adsorption. The maximum elimination capacity of HLC and HLC/CoFe₂O₄ samples was calculated as 42.75 and 44.42 mg g^-1, respectively. Furthermore, thermodynamic investigations proved the spontaneous and exothermic nature of the process. The adsorption efficiency was decreased with increasing the content of Ca²⁺ and Na ⁺ cations in aqueous media. During reusability of the synthesized adsorbents, it was found that after 8 cycles, no significant decrease has occurred in the adsorption efficiency. In addition, real wastewater treatment results proved that HLC/CoFe₂O₄ magnetic composite has an excellent performance in removal of heavy metals pollutant from shipbuilding effluent.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

New Insights into High-Performance Nanocomposite Membranes with Threefold-Imprinted Layers for Selective Recognition and Separation

Herein, we reported on mixed-matrix membranes with polydopamine (PDA)-based threefold-imprinted layers (MMMs-PTIs), in which the dopamine molecules were simultaneously regarded as functional monomers and cross-linking agents during the first-in-class ternary-PDA-based imprinted method. Threefold-ibuprofen-imprinted layers were constructed into and onto the MMMs-PTIs through the phase inversion process, followed by suction filtration strategy, in which the PDA-based ibuprofen-imprinted activated carbon (AC)/SiO₂ and TiO₂/GO were chosen as fillers. Based on the threefold-imprinted SiO₂/AC and polymer and TiO₂/GO-loaded structure, rebinding capacities and permselectivity of MMMs-PTIs had been successfully enhanced, and the selective recognition and separation mechanism had been finally evaluated based on the static adsorption/permeation results. Both high rebinding capacity (53.22 mg/g) and adsorption selectivity (α > 2.0) had been achieved. Importantly, as to the permselectivity performance of MMMs-PTIs toward different compounds, the ibuprofen-permeation efficiencies (β value) of MMMs-PTIs reached 4.07, 4.08, and 3.77, respectively. That is to say, remarkable and stable permselectivity performance could be obtained, which demonstrated the successful preparation of good recognizability and permeability toward ibuprofen.

Natural and anthropogenic origin of metallic contamination and health risk assessment: A hydro-geochemical study of Sehwan Sharif, Pakistan

Heavy metal contamination in groundwater is a serious threat to the environment and therefore its proper monitoring is a matter of great concern these days. In the present research, groundwater samples from Sehwan Sharif district Jamshoro, Pakistan were collected to estimate the concentration of various elements including potentially hazardous metals. Statistical analysis of the collected data based on Pearson co-relation metal clustering and Principal Component Analysis (PCA) divides the elements into three groups; Group I contains As, Cu, Ni, and Cd, Group II contains Mn, Fe, B, and Cr and Group III contains Pb and Zn. The elements Cu, Ni, As, Pb, Cd, and Zn found with higher RSD values demonstrate their anthropogenic origin whereas the lower concentration of Mn, Fe, B, and Cr indicate their natural origin (Tepanosyan et al., 2016). The histograms and box-plots of Mn, Fe, B and Cr were found normally distributed while abnormal for Cu, Ni, Pb, As, Cd and Zn. The HQs of these elements indicate their non-carcinogenic risks. However, results of individual metallic behavior indicate the highest HQ measured for B followed by HQs for Cu, and As. The toxic effects of investigated metal (loid)s calculated using HI were found to be 1.58 for adults and 1.35 for the child which is considered the medium chromic risk and cancer risk. About the toxicity of these heavy metals, their cancer risk was assessed on the levels of Cd, As, and Cr in groundwater. The carcinogenic risk of As was found to be 2.78 × 10^-4 and 1.62 × 10^-3 for child and adult, respectively. Furthermore, the values of this carcinogenic risk are 2.64 × 10^-6 and 1.54 × 10^-5 for Cd while 4.24 × 10^-3 and 2.48 × 10^-2 for Cr in child and adult, respectively. Since cancer risk exceeded the target risk of 1 × 10^-4 for As and Cr in adults and children, it can thus be considered 'non-acceptable'. The Geographic Information System (GIS) based maps were prepared using Inverse Distance Weighted (IDW) interpolation which showed the Spatial distribution of all elements throughout Sehwan Sharif from different sources of environment. Spatial maps of elements produced by ArcGIS show the hotspots of potentially hazardous elements such as the highest concentration of Pb, As, Zn, Cu, Ni, and Cd were found in urban areas of Sehwan Sharif district Jamshoro, Pakistan.

Advances in preparation, mechanism and applications of various carbon materials in environmental applications: A review

Carbon-related materials are now widely investigated in a various industrial field due to their excellent and unique qualities. It must be tailored to the application in such a way that it fits the application. At the same time, it needs to be generated in sufficient quantities for commercial use, and the synthesis method is the major sticking point here. Because most new materials are discovered by chance, the synthesis process described here may not be the most effective way to create them. The research is merely a steppingstone to discovering a different approach, and it will continue until the substance is no longer being used. If you're developing materials for any purpose, synthesis processes are essential. Fullerene, carbon nanotubes (CNT), graphene, and MXene are only a few of the carbon-based compounds discussed in this overview study, which also gives a brief prognosis on the materials future. Furthermore, the environmental application of these carbon materials was discussed and commented.

Synthesis, Characterization, and Application of Magnetized Lanthanum (III)-Based Metal-Organic Framework for the Organic Dye Removal from Water

A hybrid composite based on metal-organic framework (MOF) was chemically fabricated by embedding the magnetic Fe3O4 nanoparticles within amino-functionalized porous La-MOF (MOF/NH2) to produce a highly efficient and reusable composite of MOF/NH2/Fe3O4. Different proper techniques were used for the characterization of surface morphology and chemical arrangement of the prepared MOF/NH2/Fe3O4 composite. The characterization results using various techniques including Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), Brunauer, Emmett, and Teller analysis (BET), and vibrating sample magnetometer (VSM) approved the successful fabrication of MOF with amino arms on its surface besides the well magnetization using magnetic nanoparticles. The MOF/NH2/Fe3O4 composite showed enhanced adsorption capacity (618 mg/g) toward methyl orange (MO) anionic dye which is higher than many commercial reported adsorbents due to the presence of many types of adsorption sites (NH2 groups and lanthanum sites), large surface area of MOF, and the synergetic effect of magnetic nanoparticles. Moreover, the MOF/NH2/Fe3O4 composite showed selective adsorption of MO dye from dye mixtures owing to the electrostatic attraction. Also, the MOF/NH2/Fe3O4 composite retained over 90% of its efficiency for the dye removal even after six successive cycles. So, the present study provided a practical strategy for the design of functional MOF hybrid composites. Furthermore, due to the adaptability of its architectural form, it is a potential adsorbent material for industrial wastewater treatment uses.

Sulfonated calixarene modified Poly(methyl methacrylate) nanoparticles:A promising adsorbent for Removal of Vanadium Ions from aqueous media

The poly (methyl methacrylate) (PMMA)-based nanoparticle was synthesized by surfactant-free emulsion polymerization method and then post modified with Calixarene using (3-Aminopropyl)triethoxysilane organo-silane as a linker after OH-treatment. The prepared structure was applied for efficient adsorption of Vanadium ions in the aqueous solution after characterization by FT-IR, SEM, TEM, DLS, and EDX. Additional investigations discovered that the prepared adsorbent has a good capacity to adsorb vanadium ions. The effect of key experimental factors was studied to find the optimal point of adsorbent efficiency including the initial concentration of analyte, sorbent dosage, pH of the solution, contact time, and type/quantity of the eluents. It was specified, the maximum adsorption capacity for the synthesized nanoparticles was obtained about 322 mg g^-1. The adsorption mechanism was revealed that the model of Langmuir isotherm well-matched compared to the others due to the calculated equilibrium data. Besides, the kinetics of the adsorption process was fitted with pseudo-second-order. Eventually, the prepared adsorbent was successfully applied in vanadium adsorption from real water media.

Removal of pharmaceuticals (diclofenac and amoxicillin) by maltodextrin/reduced graphene and maltodextrin/reduced graphene/copper oxide nanocomposites

Due to the scarcity of water and the growing industrialization, pharmaceutical wastewater treatment is of particular importance. For this reason, it is necessary to achieve an efficient method to eliminate all types of pharmaceutical pollutants. Herein, synthetic nano-composite is proposed to take a step towards improving the operation of removing pharmaceutical contaminants from the environment and aquatic and industrial effluents. Binary (maltodextrin/reconstituted graphene nanocomposite) and ternary (maltodextrin/reconstituted graphene nanocomposite/copper oxide) nanocomposites were prepared and characterized using, FT-IR, FESEM-EDS, TEM, DLS, and XRD. The nanocomposites were used to eliminate diclofenac and amoxicillin as Pharmaceuticals. The removal of amoxicillin at a concentration of 30 mg/L with an adsorbent dose of 0.05 g and a pH of 7.4 and an optimal temperature of 20 °C in 10 min has the highest removal rate of 86%. In addition, diclofenac with nano-adsorbents prepared under optimal conditions, including an initial concentration of 20 mg/L, adsorbent dose of 0.05 g, adsorption time of 7 min, a temperature of 20 °C and a pH of 7, has the highest removal efficiency of 94%. The results indicated that the prepared nanocomposites are alternative adsorbents to remove Pharmaceuticals from water.

Electrospun Ag-decorated reduced GO-graft-chitosan composite nanofibers with visible light photocatalytic activity for antibacterial performance

The treatment of water contaminated by bacteria is becoming a necessity. The nanomaterials possessing both intrinsic antibacterial properties and photocatalytic activity are excellent candidates for water disinfection. The powdered form of nanomaterials can be aggregated while embedding the nanomaterials into the NFs can overcome the limitation and enhance the photocatalytic activity and transition from UV-light to visiblelight. Here, graphene oxide (GO) was synthesized, grafted to chitosan, and decorated with silver nanoparticles (Ag NPs) to produce Ag-decorated reduced GO-graft-Chitosan (AGC) NPs. The blends of polyacrylonitrile (PAN) and AGC NPs were prepared in various concentrations of 0.5 wt%, 1.0 wt%, 5.0 wt%, and 10.0 wt% and used to fabricate the electrospun composite NFs. FTIR/ATR, UV-Vis, Raman, XRD, and SEM/EDAX analyses confirmed the successful preparation of the NPs and NFs. The cytotoxicity and antibacterial activity of the composite NFs were received in the order of composite NFs 10.0 wt%˃ 5.0 wt%˃ 1.0 wt%˃ 0.5 wt% in both conditions with/without light irradiation. Their cytotoxicity and antibacterial activity were more under light irradiation compared to the dark. The composite NFs (5.0 wt%) were distinguished as the optimum NFs with cell viability of 80% within 24 h and 60% within 48 h on L929 cells and inhibition zone diameter (IZD) of 12 mm for E. coli and 13 mm for S. aureus after 24 h under the light irradiation. The optimum composite NFs showed thermal stability up to 180 °C and tensile strength of 1.11 MPa with 21.71% elongation at break.

A review on magnetic sensors for monitoring of hazardous pollutants in water resources

Water resources have long been of interest to humans and have become a serious issue in all aspects of human life. The disposal of hazardous pollutants in water resources is one of the biggest global concerns and poses many risks to human health and aquatic life. Therefore, the control of hazardous pollutants in water resources plays an important role, when it comes to evaluating water quality. Due to low toxicity, good electrical conductivity, facile functionalization, and easy preparation, magnetic materials have become a good alternative in recent years to control hazardous pollutants in water resources. In the present study, the idea of using magnetic sensors in controlling and monitoring of pharmaceuticals, pesticides, heavy metals, and organic pollutants have been reviewed. The water pollutants in drinking water, groundwater, surface water, and seawater have been discussed. The toxicology of water hazardous pollutants has also been reviewed. Then, the magnetic materials were discussed as sensors for controlling and monitoring pollutants. Finally, future remarks and perspectives on magnetic nanosensors for controlling hazardous pollutants in water resources and environmental applications were explained.

Preconcentrations of Cu (II) and Mn (II) by magnetic solid-phase extraction on Bacillus cereus loaded γ-Fe2O3 nanomaterials

For the simultaneous preconcentrations of Cu(II) and Mn(II), a novel preconcentration technique was developed and described. Bacillus cereus loaded magnetic ɣ-Fe₂O₃ nanoparticles were prepared and used as support materials on solid-phase extraction procedure. Important experimental parameters were investigated in details and pH 6.0, 3 mL min^-1 of flow rate, 5 mL of 1 mol L^-1 of HCl as eluent, 200 mg of biomass, and 200 mg of magnetic ɣ-Fe₂O₃ nanoparticles as support material was found as the best conditions. The preconcentrations factor were found to be 80 for Cu (II) and Mn(II). It was confirmed by the results that SPE columns could be used in 32 cycles. The LOD values calculated for Cu (II) and Mn (II) were 0.09 and 0.08 ng mL^-1, respectively. The RSD values found were less than 3.4%. The extraction recoveries were achieved as higher than 98%. The biosorption capacities of Cu (II), and Mn (II) were 26.0 mg g^-1, 30.3 mg g^-1 respectively. The approach devised for analyzing analyte concentrations in food samples proved to be successful.

Nanomaterials with Excellent Adsorption Characteristics for Sample Pretreatment: A Review

Sample pretreatment in analytical chemistry is critical, and the selection of materials for sample pretreatment is a key factor for high enrichment ability, good practicality, and satisfactory recoveries. In this review, the recent progress of the sample pretreatment methods based on various nanomaterials (i.e., carbon nanomaterials, porous nanomaterials, and magnetic nanomaterials) with excellent adsorption efficiency, selectivity, and reproducibility, as well as their applications, are presented. Due to the unique nanoscale physical–chemical properties, magnetic nanomaterials have been used for the extraction of target analytes by easy-to-handle magnetic separation under a magnetic field, which can avoid cumbersome centrifugation and filtration steps. This review also highlights the preparation process and reaction mechanism of nanomaterials used in the sample pretreatment methods, which have been applied for the extraction organophosphorus pesticides, fluoroquinolone antibiotics, phenoxy carboxylic acids, tetracycline antibiotics, hazardous metal ions, and rosmarinic acid. In addition, the remaining challenges and future directions for nanomaterials used as sorbents in the sample pretreatment are discussed.

Functionalization of MXene-based nanomaterials for the treatment of micropollutants in aquatic system: A review

The increased industrialization and urbanization generate a larger quantity of effluent that is discharged into the environment regularly. Based on the effluent composition produced from various industries, the number of hazardous substances such as heavy metals, hydrocarbons, volatile organic compounds, organic chemicals, microorganisms introduced into the aquatic systems vary. The conventional wastewater treatment systems do not meet the effluent standards before discharge and require a different treatment system before reuse. Adsorption is an eco-friendly technique that uses selective adsorbents to remove hazardous pollutants even at microscale levels. MXene, a 2-Dimensional nanomaterial with resplendent properties like conductivity, hydrophilicity, stability, and functionalized surface characteristics, is found as a potential candidate for pollutant removal systems. This review discusses the fabrication, characterization, and application of MXene based nanoparticles to remove many pollutants in water treatment systems. The improvement in surface properties and adsorption capacity of MXene based NPs, when modified using different modification agents, has also been discussed. Their feasibility in terms of economic and environmental aspects has been evaluated to understand their scope for practical application in large-scale industries. The challenges towards the synthesis and toxicity's importance have been discussed, with the appropriate recommendations.

Cerium functionalized graphene nano-structures and their applications; A review

Graphene-based nanomaterials with remarkable properties, such as good biocompatibility, strong mechanical strength, and outstanding electrical conductivity, have dramatically shown excellent potential in various applications. Increasing surface area and porosity percentage, improvement of adsorption capacities, reduction of adsorption energy barrier, and also prevention of agglomeration of graphene layers are the main advantages of functionalized graphene nanocomposites. On the other hand, Cerium nanostructures with remarkable properties have received a great deal of attention in a wide range of fields; however, in some cases low conductivity limits their application in different applications. Therefore, the combination of cerium structures and graphene networks has been widely invesitaged to improve properties of the composite. In order to have a comprehensive information of these nanonetworks, this research reviews the recent developments in cerium functionalized graphene derivatives (graphene oxide (GO), reduced graphene oxide (RGO), and graphene quantum dot (GQD) and their industrial applications. The applications of functionalized graphene derivatives have also been successfully summarized. This systematic review study of graphene networks decorated with different structure of Cerium have potential to pave the way for scientific research not only in field of material science but also in fluorescent sensing, electrochemical sensing, supercapacitors, and catalyst as a new candidate.

Synthesis and characterization of Ag-ion-exchanged zeolite/TiO2 nanocomposites for antibacterial applications and photocatalytic degradation of antibiotics

This paper investigates the synthesis, antibacterial, and photocatalytic properties of silver ion-exchanged natural zeolite/TiO₂ photocatalyst nanocomposite. Zeolite is known to have a porous surface structure, making it an ideal substrate and framework in different nanocomposites. Moreover, natural zeolite has a superior thermal and chemical stability, with hardly any reactivity with chemicals. Finding an effective and low-cost method to remove both antibiotics and bacteria from water resources has become a vital global issue due to the worldwide excessive use of chemicals and antibiotics. This research aims to propose a facile method to synthesize Ag-ion-exchanged zeolite/TiO₂ catalyst for anti-bacterial purposes and photocatalytic removal of atibiotics from wastewaters. TiO₂ particles were deposited on the surface of natural zeolite. Ag ion exchanging was performed via a liquid ion-exchange method using 0.1 M AgNO₃ solution. X-ray diffractometry (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FTIR) were used to evaluate the structure of synthesized powders. Antibacterial activities of samples were assessed, using Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922 by disc diffusion method. It was shown that Ag-containing nanocomposite samples have an improved antibacterial performance in both cases. Results showed that the synthesized catalyst has promising potentials in wastewater treatment.