Evaluation of cell-surface interaction using a 3D spheroid cell culture model on artificial extracellular matrices

Dual-Purpose 3D-Silica Nanostructure Matrix for Rapid Epigenetic Reprogramming of Tumor Cell to Cancer Stem Cell Spheroid

Cancer stem cells (CSCs), a rare subpopulation responsible for tumorigenesis and therapeutic resistance, are difficult to characterize and isolate. Conventional method of growing CSCs takes up to 2-8 weeks inhibiting the rate of research. Therefore, rapid reprogramming (RR) of tumor cells into CSCs is crucial to accelerate the stem cell oncology research. The current RR techniques cannot be utilized for CSC RR due to many limitations posed due to isolation requirements resulting in loss of vital data. Hence, a technique that can induce CSC RR without the need for isolation procedures is needed. Here, fabrication of a 3D-silica nanostructured extracellular matrix for RR and in situ monitoring is reported. The RR is tested using three preclinical cancer models. The 3D matrix and a zeta potential study confirm an intense material-cellular interaction resulting in the enhanced expressions of surface and epigenetic biomarkers. Cancer cells require only 3-day period to form CSC spheroids with 3D-silica extracellular matrix. Real-time single-cell monitoring of the methylene blue-induced photodynamic demonstrates the dual functionality. To the authors' knowledge, this is the first study to demonstrate a CSC epigenetic reprogramming using nanostructures. These findings may pave the path for accelerating the stem cell research in oncology.

3D-printed collagen/silk fibroin/secretome derived from bFGF-pretreated HUCMSCs scaffolds enhanced therapeutic ability in canines traumatic brain injury model

The regeneration of brain tissue poses a great challenge because of the limited self-regenerative capabilities of neurons after traumatic brain injury (TBI). For this purpose, 3D-printed collagen/silk fibroin/secretome derived from human umbilical cord blood mesenchymal stem cells (HUCMSCs) pretreated with bFGF scaffolds (3D-CS-bFGF-ST) at a low temperature were prepared in this study. From an in vitro perspective, 3D-CS-bFGF-ST showed good biodegradation, appropriate mechanical properties, and good biocompatibility. In regard to vivo, during the tissue remodelling processes of TBI, the regeneration of brain tissues was obviously faster in the 3D-CS-bFGF-ST group than in the other two groups (3D-printed collagen/silk fibroin/secretome derived from human umbilical cord blood mesenchymal stem cells (3D-CS-ST) group and TBI group) by motor assay, histological analysis, and immunofluorescence assay. Satisfactory regeneration was achieved in the two 3D-printed scaffold-based groups at 6 months postsurgery, while the 3D-CS-bFGF-ST group showed a better outcome than the 3D-CS-ST group.

3D-printed collagen/chitosan/secretome derived from HUCMSCs scaffolds for efficient neural network reconstruction in canines with traumatic brain injury

The secretome secreted by stem cells and bioactive material has emerged as a promising therapeutic choice for traumatic brain injury (TBI). We aimed to determine the effect of 3D-printed collagen/chitosan/secretome derived from human umbilical cord blood mesenchymal stem cells scaffolds (3D-CC-ST) on the injured tissue regeneration process. 3D-CC-ST was performed using 3D printing technology at a low temperature (−20°C), and the physical properties and degeneration rate were measured. The utilization of low temperature contributed to a higher cytocompatibility of fabricating porous 3D architectures that provide a homogeneous distribution of cells. Immediately after the establishment of the canine TBI model, 3D-CC-ST and 3D-CC (3D-printed collagen/chitosan scaffolds) were implanted into the cavity of TBI. Following implantation of scaffolds, neurological examination and motor evoked potential detection were performed to analyze locomotor function recovery. Histological and immunofluorescence staining were performed to evaluate neuro-regeneration. The group treated with 3D-CC-ST had good performance of behavior functions. Implanting 3D-CC-ST significantly reduced the cavity area, facilitated the regeneration of nerve fibers and vessel reconstruction, and promoted endogenous neuronal differentiation and synapse formation after TBI. The implantation of 3D-CC-ST also markedly reduced cell apoptosis and regulated the level of systemic inflammatory factors after TBI.

Sulfated Hyaluronan Binds to Heparanase and Blocks Its Enzymatic and Cellular Actions in Carcinoma Cells

We examined whether sulfated hyaluronan exerts inhibitory effects on enzymatic and biological actions of heparanase, a sole endo-beta-glucuronidase implicated in cancer malignancy and inflammation. Degradation of heparan sulfate by human and mouse heparanase was inhibited by sulfated hyaluronan. In particular, high-sulfated hyaluronan modified with approximately 2.5 sulfate groups per disaccharide unit effectively inhibited the enzymatic activity at a lower concentration than heparin. Human and mouse heparanase bound to immobilized sulfated hyaluronan. Invasion of heparanase-positive colon-26 cells and 4T1 cells under 3D culture conditions was significantly suppressed in the presence of high-sulfated hyaluronan. Heparanase-induced release of CCL2 from colon-26 cells was suppressed in the presence of sulfated hyaluronan via blocking of cell surface binding and subsequent intracellular NF-κB-dependent signaling. The inhibitory effect of sulfated hyaluronan is likely due to competitive binding to the heparanase molecule, which antagonizes the heparanase-substrate interaction. Fragment molecular orbital calculation revealed a strong binding of sulfated hyaluronan tetrasaccharide to the heparanase molecule based on electrostatic interactions, particularly characterized by interactions of (−1)- and (−2)-positioned sulfated sugar residues with basic amino acid residues composing the heparin-binding domain-1 of heparanase. These results propose a relevance for sulfated hyaluronan in the blocking of heparanase-mediated enzymatic and cellular actions.

Collagen/glycosaminoglycan-based matrices for controlling skin cell responses

Wound healing and tissue regeneration are orchestrated by the cellular microenvironment, e.g. the extracellular matrix (ECM). Including ECM components in biomaterials is a promising approach for improving regenerative processes, e.g. wound healing in skin. This review addresses recent findings for enhanced epidermal-dermal regenerative processes on collagen (coll)/glycosaminoglycan (GAG)-based matrices containing sulfated GAG (sGAG) in simple and complex in vitro models. These matrices comprise 2D-coatings, electrospun nanofibrous scaffolds, and photo-crosslinked acrylated hyaluronan (HA-AC)/coll-based hydrogels. They demonstrated to regulate keratinocyte and fibroblast migration and growth, to stimulate melanogenesis in melanocytes from the outer root sheath (ORS) of hair follicles and to enhance the epithelial differentiation of human mesenchymal stem cells (hMSC). The matrices' suitability for delivery of relevant growth factors, like heparin-binding epidermal growth factor like growth factor (HB-EGF), further highlights their potential as bioinspired, functional microenvironments for enhancing skin regeneration.

Flow cytometric quantification of apoptotic and proliferating cells applying an improved method for dissociation of spheroids

Spheroids are a promising tool for many cell culture applications, but their microscopic analysis is limited. Flow cytometry on a single cell basis, which requires a gentle but also efficient dissociation of spheroids, could be an alternative analysis. Mono-culture and coculture spheroids consisting of human fibroblasts and human endothelial cells were generated by the liquid overlay technique and were dissociated using AccuMax as a dissociation agent combined with gentle mechanical forces. This study aimed to quantify the number of apoptotic and proliferative cells. We were able to dissociate spheroids of differing size, age, and cellular composition in a single-step dissociation protocol within 10 min. The number of single cells was higher than 95% and in most cases, the viability of the cells after dissociation was higher than 85%. Coculture spheroids exhibited a higher sensitivity as shown by lower viability, higher amount of cellular debris, and a higher amount of apoptotic cells. Considerable expression of the proliferation marker Ki67 could only be seen in 1-day-old spheroids but was already downregulated on Day 3. In summary, our dissociation protocol enabled a fast and gentle dissociation of spheroids for the subsequent flow cytometric analysis. The chosen cell type had a strong influence on cell viability and apoptosis. Initially high rates of proliferative cells decreased rapidly and reached values of healthy tissue 3 days after generation of the spheroids. In conclusion, the flow cytometry of dissociated spheroids could be a promising analytical tool, which could be ideally combined with microscopic techniques.

An injectable, self-assembled multicellular microsphere with the incorporation of fibroblast-derived extracellular matrix for therapeutic angiogenesis

Decellularized human lung fibroblast-derived matrix (hFDM) has demonstrated its excellent proangiogenic capability. In this study, we propose a self-assembled, injectable multicellular microspheres containing human umbilical vein endothelial cells (HUVECs) and mesenchymal stem cell (MSCs), collagen hydrogel (Col), and hFDM toward therapeutic angiogenesis. Those multicellular microspheres are spontaneously formed by the mixtures of cell and hydrogel after being dropped on the parafilm for several hours. The size of microspheres can be manipulated via adjusting the initial volume of droplets and the culture period. The cells in the microspheres are highly viable. Multicellular microspheres show good capability of cell migration on 2D culture plate and also exhibit active cell sprouting in 3D environment (Col) forming capillary-like structures. We also find that multiple angiogenic-related factors are significantly upregulated with the multicellular microspheres prepared via Col and hFDM (Col/hFDM) than those prepared using Col alone or single cells (harvested from cocultured HUVECs/MSCs in monolayer). For therapeutic efficacy evaluation, three different groups of single cells, Col and Col/hFDM microspheres are injected to a hindlimb ischemic model, respectively, along with PBS injection as a control group. It is notable that Col/hFDM microspheres significantly improve the blood reperfusion and greatly attenuate the fibrosis level of the ischemic regions. In addition, Col/hFDM microspheres show higher cell engraftment level than that of the other groups. The incorporation of transplanted cells with host vasculature is detectable only with the treatment of Col/hFDM. Current results suggest that hFDM plays an important role in the multicellular microspheres for angiogenic cellular functions in vitro as well as in vivo. Taken together, our injectable multicellular microspheres (Col/hFDM) offer a very promising platform for cell delivery and tissue regenerative applications.

A stimuli-responsive combination therapy for recovering p53-inactivation associated drug resistance

Drug resistance is a major hindrance in the anticancer treatment, which encourages the development of effective therapeutic strategies. For the first time, MDM2-mediated p53 degradation was identified as a critical factor for developing acquired resistance of doxorubicin (DOX) in HepG2 tumor spheroids, which could be effectively reversed by MDM2 inhibitor MI-773, thereby improving anticancer effects. Therefore, a pH-sensitive liposomal formulation of DOX and MI-773 (LipD/M@CMCS) were developed for recovering p53-mediated DOX resistance in hepatocellular carcinoma. LipD/M@CMCS were composed of cationic liposomes covered with carboxymethyl chitosan (pI = 6.8), and were stable in the physiological condition (pH 7.4), but rapidly converted to cationic liposomes in tumor acidic microenvironment (pH 6.5), endowing them with tumor specificity and enhanced cellular uptake. We showed that LipD/M@CMCS could not only effectively induce cell apoptosis in HepG2 tumor spheroids, but significantly inhibit tumor growth with minimal adverse effects. In summary, selective regulation of MDM2 in cancer cells is a promising strategy to overcome DOX resistance, and may provide a perspective on the management of malignant tumors.

The impact of collagen membranes on 3D gingival fibroblast toroids

Background

Development in guided tissue regeneration requires biomaterial testing. 3D cell constructs represent a new approach to bridge the gap between cell culture and animal models. Following the hypothesis that attachment behavior of cells could be observed in toroidal 3D cell constructs, the aim of this study was to evaluate 3D gingival fibroblast (GF) toroids as a simple and feasible in vitro assay to test attachment of oral fibroblasts to collagen membranes.

Methods

3D ring-like structures (toroids) were formed from human GF. Hematoxylin-eosin staining was performed with formed GF toroids. Produced GF toroids were seeded onto plastic surfaces or collagen membranes. The morphology was documented at 24 h, 48 h and 72 h after seeding with light and fluorescence microscopy. Toroid vitality was assessed at same time points with a resazurin-based toxicity assay.

Results

GF showed normal morphology in toroid hematoxylin-eosin staining. Over 72 h, GF toroids on plastic surfaces stayed unchanged, while GF toroids on collagen membranes showed dilatation. GF toroids on plastic surfaces and collagen membranes were metabolically active over the observed period.

Conclusions

Depending on the surface material, 3D GF toroids show different attachment behavior. Thus, GF toroids are suitable as simple assay to study attachment behavior to various biomaterials.

3D human bone marrow stromal and endothelial cell spheres promote bone healing in an osteogenic niche

The current study used an ex vivo [embryonic day (E)18] chick femur defect model to examine the bone regenerative capacity of implanted 3-dimensional (3D) skeletal–endothelial cell constructs. Human bone marrow stromal cell (HBMSC) and HUVEC spheroids were implanted within a bone defect site to determine the osteogenic potential of the skeletal–endothelial cell unit. Cells were pelleted as co- or monocell spheroids and placed within 1-mm-drill defects in the mid-diaphysis of E18 chick femurs and cultured organotypically for 10 d. Micro-computed tomography analysis revealed significantly (P = 0.0001) increased levels of bone volume (BV) and BV/tissue volume ratio in all cell-pellet groups compared with the sham defect group. The highest increase was seen in BV in femurs containing the HUVEC and HBMSC monocell constructs. Type II collagen expression was particularly pronounced within the cell spheres containing HBMSCs and HUVECs, and CD31-positive cell clusters were prominent within HUVEC-implanted defects. These studies demonstrate the importance of the 3D osteogenic-endothelial niche interaction in bone regeneration. Elucidating the component cell interactions in the osteogenic-vascular niche and the role of exogenous factors in driving these osteogenic processes will aid the development of better bone reparative strategies.—Inglis, S., Kanczler, J. M., Oreffo, R. O. C. 3D human bone marrow stromal and endothelial cell spheres promote bone healing in an osteogenic niche.

Enhanced osteodifferentiation of MSC spheroids on patterned electrospun fiber mats - An advanced 3D double strategy for bone tissue regeneration

2D cell culture has been widely developed with various micropatterning and microfabrication techniques over the past few decades for creating and controlling cellular microenvironments including cell-matrix interactions, cell-cell interactions, and bio-mimicking the in-vivo tissue hierarchy and functions. However, the drawbacks of 2D culture have currently paved the way to 3D cell culture which is considered clinically and biologically more relevant. Here we report a 3D double strategy for osteodifferentiation of MSC spheroids on nano- and micro-patterned PLGA/Collagen/nHAp electrospun fiber mats. A comparison of cell alignment, proliferation and differentiation of 2D and 3D MSCs on patterned and non-patterned substrate was done. The study demonstrates the synergistic effect of geometric cues and 3D culture on differentiation of MSC spheroids into osteogenic lineage even in absence of osteoinduction medium.

Nucleocytoplasmic distribution of S6K1 depends on the density and motility of MCF-7 cells in vitro

Background: The ribosomal protein S6 kinase 1 (S6K1) is one of the main components of the mTOR/S6K signal transduction pathway, which controls cellular metabolism, autophagy, growth, and proliferation. Overexpression of S6K1 was detected in tumors of different origin including breast cancer, and correlated with the worse disease outcome. In addition, significant accumulation of S6K1 was found in the nuclei of breast carcinoma cells suggesting the implication of kinase nuclear substrates in tumor progression. However, this aspect of S6K1 functioning is still poorly understood. The main aim of the present work was to study the subcellular localization of S6K1 in breast cancer cells with the focus on cell migration. Methods: Multicellular spheroids of MCF-7 cells were generated using agarose-coated Petri dishes. Cell migration was induced by spheroids seeding onto adhesive growth surface and subsequent cultivation for 24 to 72 hours. The subcellular localization of S6K1 was studied in human normal breast and cancer tissue samples, 2D and 3D MCF-7 cell cultures using immunofluorescence analysis and confocal microscopy. Results: Analysis of histological sections of human breast tissue samples revealed predominantly nuclear localization of S6K1 in breast malignant cells and its mainly cytoplasmic localization in conditionally normal cells. In vitro studies of MCF-7 cells demonstrated that the subcellular localization of S6K1 depends on the cell density in the monolayer culture. S6K1 relocalization from the cytoplasm into the nucleus was detected in MCF-7 cells migrating from multicellular spheroids onto growth surface. Immunofluorescence analysis of S6K1 and immunocoprecipitation assay revealed the colocalization and interaction between S6K1 and transcription factor TBR2 (T-box brain protein 2) in MCF-7 cells. Conclusions: Subcellular localization of S6K1 depends on the density and locomotor activity of the MCF-7 cells.

Nucleocytoplasmic distribution of S6K1 depends on the density and motility of MCF-7 cells in vitro

Background: The ribosomal protein S6 kinase 1 (S6K1) is one of the main components of the mTOR/S6K signal transduction pathway, which controls cellular metabolism, autophagy, growth, and proliferation. Overexpression of S6K1 was detected in tumors of different origin including breast cancer, which was associated with a worse disease outcome. In addition, significant accumulation of S6K1 was found in the nuclei of breast carcinoma cells suggesting the implication of kinase nuclear substrates in tumor progression. However, this aspect of S6K1 functioning is poorly understood. The main aim of the present work was to study the subcellular localization of S6K1 in breast cancer cells with focus on cell migration. Methods: Multicellular spheroids of MCF-7 cells were generated using agarose-coated Petri dishes. Cell migration was initiated by spheroids seeding onto growth surface and subsequent cultivation for 24 and 72 hours. S6K1 subcellular localization was studied in human breast cancer and normal tissue, 2D and 3D MCF-7 cell culture using immunofluorescence analysis and confocal microscopy. Results: Analysis of histological sections of human breast cancer and normal tissue revealed predominantly nuclear localization of S6K1 in breast malignant cells and mainly cytoplasmic one in conditionally normal cells. In vitro studies of MCF-7 cells showed that the subcellular localization of S6K1 depends on the cell density in the monolayer culture. S6K1 relocalization from the cytoplasm into the nucleus was detected in MCF-7 cells migrating from multicellular spheroids onto growth surface. Immunofluorescence analysis of S6K1 and immunocoprecipitation assay revealed the colocalization and interaction between S6K1 and transcription factor TBR2 (T-box brain protein 2) in MCF-7 cells. Bioinformatical analysis revealed existence of several phosphorylation sites in TBR2 for S6K1 suggesting that TBR2 can be a target for phosphorylation and regulation by S6K1. Conclusions: Subcellular localization of S6K1 depends on the density and locomotor activity of the MCF-7 cells.

Bio-inks for 3D bioprinting: recent advances and future prospects

In the last decade, interest in the field of three-dimensional (3D) bioprinting has increased enormously. This review describes all the currently used bio-printing inks, including polymeric hydrogels, polymer bead microcarriers, cell aggregates and extracellular matrix proteins.