Nanosized CaP-silk fibroin-PCL-PEG-PCL/PCL based bilayer membranes for guided bone regeneration

Collagen-hydroxyapatite based scaffolds for bone trauma and regeneration: recent trends and future perspectives

Regenerative therapy, a key area of tissue engineering, holds promise for restoring damaged organs, especially in bone regeneration. Bone healing is natural to the body but becomes complex under stress and disease. Large bone deformities pose significant challenges in tissue engineering. Among various methods, scaffolds are attractive as they provide structural support and essential nutrients for cell adhesion and growth. Collagen and hydroxyapatite (HA) are widely used due to their biocompatibility and biodegradability. Collagen and nano-scale HA enhance cell adhesion and development. Thus, nano HA/collagen scaffolds offer potential solutions for bone regeneration. This review focuses on the use and production of nano-sized HA/collagen composites in bone regeneration.

Biodegradable electrospun poly(L-lactide-co-ε-caprolactone)/polyethylene glycol/bioactive glass composite scaffold for bone tissue engineering

The field of tissue engineering has witnessed significant advancements in recent years, driven by the pursuit of innovative solutions to address the challenges of bone regeneration. In this study, we developed an electrospun composite scaffold for bone tissue engineering. The composite scaffold is made of a blend of poly(L-lactide-co-ε-caprolactone) (PLCL) and polyethylene glycol (PEG), with the incorporation of calcined and lyophilized silicate-chlorinated bioactive glass (BG) particles. Our investigation involved a comprehensive characterization of the scaffold's physical, chemical, and mechanical properties, alongside an evaluation of its biological efficacy employing alveolar bone-derived mesenchymal stem cells. The incorporation of PEG and BG resulted in elevated swelling ratios, consequently enhancing hydrophilicity. Thermal gravimetric analysis confirmed the efficient incorporation of BG, with the scaffolds demonstrating thermal stability up to 250°C. Mechanical testing revealed enhanced tensile strength and Young's modulus in the presence of BG; however, the elongation at break decreased. Cell viability assays demonstrated improved cytocompatibility, especially in the PLCL/PEG+BG group. Alizarin red staining indicated enhanced osteoinductive potential, and fluorescence analysis confirmed increased cell adhesion in the PLCL/PEG+BG group. Our findings suggest that the PLCL/PEG/BG composite scaffold holds promise as an advanced biomaterial for bone tissue engineering.

Silk fibroin-based scaffolds for tissue engineering

Silk fibroin is an important natural fibrous protein with excellent prospects for tissue engineering applications. With profound studies in recent years, its potential in tissue repair has been developed. A growing body of literature has investigated various fabricating methods of silk fibroin and their application in tissue repair. The purpose of this paper is to trace the latest developments of SF-based scaffolds for tissue engineering. In this review, we first presented the primary and secondary structures of silk fibroin. The processing methods of SF scaffolds were then summarized. Lastly, we examined the contribution of new studies applying SF as scaffolds in tissue regeneration applications. Overall, this review showed the latest progress in the fabrication and utilization of silk fibroin-based scaffolds.

Silk fibroin/methacrylated gelatine/hydroxyapatite biomimetic nanofibrous membranes for guided bone regeneration

By mimicking in vivo bionic microenvironment and promoting osteogenic differentiation, the hybrid organic-inorganic nanofibrous membranes provide promising potential for guided bone regeneration (GBR) in the treatment of clinical bone defects. To develop a degradable and osteogenic membrane for GBR by combining the natural biomacromolecule silk fibroin (SF) and gelatine with the bioactive nano hydroxyapatite (nHA), the anhydride-modified gelatine-nano hydroxyapatite (GelMA-nHA) composites were synthesized in situ and introduced into silk fibroin to prepare nanofibrous membranes with different ratios using electrospinning and photocrosslinking. The nanofibrous membranes, particularly those with a mass ratio of 7:2:1, were found to exhibit satisfactory elongation at break up to 110 %, maintain the nanofibrous structure for up to 28 days, and rapidly form bone-like apatite within 3 days, thus offering advantages when it comes to guided bone regeneration. In vitro cell results showed that the SF/GelMA/nHA membranes had excellent biocompatibility and enhanced osteogenic differentiation of hBMSCs. In vivo studies revealed that the hybrid composite membranes can improve bone regeneration of critical-sized calvarial defects in rat model. Therefore, the novel hybrid nanofibrous membrane is proposed to be a alternative candidate for creating a bionic microenvironment that promotes bone regeneration, indicating their potential application to bone injury treatment.

Engineering periodontal tissue interfaces using multiphasic scaffolds and membranes for guided bone and tissue regeneration

Periodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.

Bilayer scaffolds/membranes for bone tissue engineering applications: A systematic review

OBJECTIVE

This systematic review evaluates the purpose, materials, physio-mechanical, and biological effects of bilayer scaffolds/membranes used for bone tissue engineering applications.

METHODS

A comprehensive electronic search of English-language literature from 2012 to October 2022 was conducted in PubMed, Scopus, ScienceDirect, and Google Scholar online databases according to the PRISMA 2020 guidelines. The quality of animal studies was evaluated through the SYRCLE's risk of bias tool.

RESULTS

A total of 77 studies were sought for retrieval, and 39 studies met the inclusion criteria. According to the synthesis results, most bilayers had a dense barrier layer that prevented connective tissue penetration and a loose osteogenic layer that supported cell migration and osteogenesis. PLGA, PCL, and chitosan were the most common polymers in the barrier layers, while the most utilized polymers in osteogenic layers were PLGA and gelatin. Electrospinning and solvent casting were the most common fabrication methods to design the bilayer structures. Many studies reported higher biological results for bilayers compared to their single layers. Also, fabricated bilayers' in vitro osteogenesis and in vivo new bone formation were significantly superior or at least comparable to the frequently used commercial membranes.

CONCLUSION

1) Bilayers with two distinct layers and different materials, porosities, mechanical properties, and biological behavior can significantly improve heterogeneous bone regeneration; 2) the addition of ceramics and/or drugs to the osteogenic layer enhances the osteogenic properties of the bilayers; 3) fabrication method and pore size of the layers play an important role in determining the mechanical and biological behavior of them.

Layered scaffolds in periodontal regeneration

Periodontitis is a common inflammatory disease in dentistry that may lead to tooth loss and aesthetic problems. Periodontal tissue has a sophisticated architecture including four sections of alveolar bone, cementum, gingiva, and periodontal ligament fiber; all these four can be damaged during periodontitis. Thus, for whole periodontal regeneration, it is important to form both hard and soft tissue structures simultaneously on the tooth root surface without forming junctional epithelium and ankylosis. This condition makes the treatment of the periodontium a challenging process. Various regenerative methods including Guided Bone/Tissue Regeneration (GBR/GTR) using various membranes have been developed. Although using such GBR/GTR membranes was successful for partial periodontal treatment, they cannot be used for the regeneration of complete periodontium. For this purpose, multilayered scaffolds are now being developed. Such scaffolds may include various biomaterials, stem cells, and growth factors in a multiphasic configuration in which each layer is designed to regenerate specific section of the periodontium. This article provides a comprehensive review of the multilayered scaffolds for periodontal regeneration based on natural or synthetic polymers, and their combinations with other biomaterials and bioactive molecules. After highlighting the challenges related to multilayered scaffolds preparation, features of suitable scaffolds for periodontal regeneration are discussed.

Nano-Based Drug Delivery Systems for Periodontal Tissue Regeneration

Periodontitis is a dysbiotic biofilm-induced and host-mediated inflammatory disease of tooth supporting tissues that leads to progressive destruction of periodontal ligament and alveolar bone, thereby resulting in gingival recession, deep periodontal pockets, tooth mobility and exfoliation, and aesthetically and functionally compromised dentition. Due to the improved biopharmaceutical and pharmacokinetic properties and targeted and controlled drug release, nano-based drug delivery systems have emerged as a promising strategy for the treatment of periodontal defects, allowing for increased efficacy and safety in controlling local inflammation, establishing a regenerative microenvironment, and regaining bone and attachments. This review provides an overview of nano-based drug delivery systems and illustrates their practical applications, future prospects, and limitations in the field of periodontal tissue regeneration.

Comparative review of piezoelectric biomaterials approach for bone tissue engineering

Bone as a minerals' reservoir and rigid tissue of the body generating red and white blood cells supports various organs. Although the self-regeneration property of bone, it cannot regenerate spontaneously in severe damages and still remains as a challenging issue. Tissue engineering offers several techniques for regenerating damaged bones, where various biomaterials are examined to fabricate scaffolds for bone repair. Piezoelectric characteristic plays a crucial role in repairing and regenerating damaged bone by mimicking the bone niche behavior. Piezoelectric biomaterials show significant potential for bone tissue engineering. Herein we try to have a comparative review on piezoelectric and non-piezoelectric biomaterials used in bone tissue engineering, classified them, and discussed their effects on implanted cells and manufacturing techniques. Especially, Polyvinylidene fluoride (PVDF) and its composites are the most practically used piezoelectric biomaterials for bone regeneration. PVDF and its composites have been summarized and discussed to repair damaged bone tissues.

Self-Assembling Imageable Silk Hydrogels for the Focal Treatment of Osteosarcoma

Background: The standard treatment for osteosarcoma comprises complete surgical resection and neoadjuvant chemotherapy, which may cause serious side effects and partial or total limb loss. Therefore, to avoid the disadvantages of traditional treatment, we developed self-assembling imageable silk hydrogels for osteosarcoma.

Methods: We analysed whether iodine induced apoptosis in MG-63 and Saos-2 cells by using CCK-8 and flow cytometry assays and transmission electron microscopy. Western blotting was used to analyse the pathway of iodine-induced apoptosis in osteosarcoma cells. PEG400, silk fibroin solution, polyvinylpyrrolidone iodine (PVP-I), and meglumine diatrizoate (MD) were mixed to produce an imageable hydrogel. A nude mouse model of osteosarcoma was established, and the hydrogel was injected locally into the interior of the osteosarcoma with X-ray guidance. The therapeutic effect and biosafety of the hydrogel were evaluated.

Results: Iodine treatment at 18 and 20 µM for 12 h resulted in cell survival rate reduced to 50 ± 2.1% and 50.5 ± 2.7% for MG-63 and Sao-2 cells, respectively (p < 0.01). The proportion of apoptotic cells was significantly higher in the iodine-treatment group than in the control group (p < 0.05), and apoptotic bodies were observed by transmission electron microscopy. Iodine could regulate the death receptor pathway and induce MG-63 and Saos-2 cell apoptosis. The hydrogels were simple to assemble, and gels could be formed within 38 min. A force of less than 50 N was required to inject the gels with a syringe. The hydrogels were readily loaded and led to sustained iodine release over 1 week. The osteosarcoma volume in the PEG-iodine-silk/MD hydrogel group was significantly smaller than that in the other three groups (p < 0.001). Caspase-3 and poly (ADP-ribose) polymerase (PARP) expression levels were significantly higher in the PEG-iodine-silk/MD hydrogel group than in the other three groups (p < 0.001). Haematoxylin and eosin (H&E) staining showed no abnormalities in the heart, liver, spleen, lung, kidney, pancreas or thyroid in any group.

Conclusions: Self-assembling imageable silk hydrogels could be injected locally into osteosarcoma tissues with X-ray assistance. With the advantages of good biosafety, low systemic toxicity and minimal invasiveness, self-assembling imageable silk hydrogels provide a promising approach for improving the locoregional control of osteosarcoma.

Biological Efficacy Comparison of Natural Tussah Silk and Mulberry Silk Nanofiber Membranes for Guided Bone Regeneration

Biopolymer nanofiber membranes are attracting interest as promising biomaterial scaffolds with a remarkable range of structural and functional performances for guided bone regeneration (GBR). In this study, tussah silk nanofiber (TSn) and Bombyx mori silk nanofiber (BSn) membranes were prepared by physical shearing. The diameters of the TSn and BSn membranes were 146.09 ± 63.56 and 120.99 ± 91.32 nm, respectively. TSn showed a Young's modulus of 3.61 ± 0.64 GPa and a tensile strength of 74.27 ± 5.19 MPa, which were superior to those of BSn, with a Young's modulus of 0.16 ± 0.03 GPa and a tensile strength of 4.86 ± 0.61 MPa. The potential of TSn and BSn membranes to guide bone regeneration was explored. In vitro, the TSn membrane exhibited significantly higher cell proliferation for MC3T3-E1 cells than the BSn membrane. In a cranial bone defect in a rat model, the TSn and BSn membranes displayed superior bone regeneration compared to the control because the membrane prevented the ingrowth of soft tissue to the defective area. Compared to the BSn membrane, the TSn membrane improved damaged bone regeneration, presumably due to its superior mechanical properties, high osteoconductivity, and increased cell proliferation. The TSn membrane has a bionic structure, excellent mechanical properties, and greater biocompatibility, making it an ideal candidate for GBR.

Fabrication of Guided Tissue Regeneration Membrane Using Lignin-Mediated ZnO Nanoparticles in Biopolymer Matrix for Antimicrobial Activity

Periodontal disease is a common complication, and conventional periodontal surgery can lead to severe bleeding. Different membranes have been used for periodontal treatment with limitations, such as improper biodegradation, poor mechanical property, and no effective hemostatic property. Guided tissue regeneration (GTR) membranes favoring periodontal regeneration were prepared to overcome these shortcomings. The mucilage of the chia seed was extracted and utilized to prepare the guided tissue regeneration (GTR) membrane. Lignin having antibacterial properties was used to synthesize lignin-mediated ZnO nanoparticles (∼Lignin@ZnO) followed by characterization with analytical techniques like Fourier-transform infrared spectroscopy (FTIR), UV–visible spectroscopy, and scanning electron microscope (SEM). To fabricate the GTR membrane, extracted mucilage, Lignin@ZnO, and polyvinyl alcohol (PVA) were mixed in different ratios to obtain a thin film. The fabricated GTR membrane was evaluated using a dynamic fatigue analyzer for mechanical properties. Appropriate degradation rates were approved by degradability analysis in water for different intervals of time. The fabricated GTR membrane showed excellent antibacterial properties against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacterial species.

Tailored alginate/PCL-gelatin-β-TCP membrane for guided bone regeneration

Membranes prepared for guided bone regeneration (GBR) signify valued resources, inhibiting fibrosis and assisting bone regenration. However, existing membranes lack bone regenerative capacity or adequate degradation profile. An alginate-casted polycaprolactone (PCL)-gelatin-β-tricalcium phosphate (β-TCP) dual membrane was fabricated by electrospinning and casting processes to enhance new bone formation under a guided bone regeneration (GBR) process. Porous membranes were synthesized with suitable hydrophilicity, swelling, and degradation behavior to confirm the compatibility of the product in the body. Furthermore, osteoblast-type cell toxicity and cell adhesion results showed that the electrospun membrane offered compatible environment to cells while the alginate sheet was found capable enough to supress the cellular attachment, but was a non-toxic material. Post-implantation, the in-vivo outcomes of the dual-layered membrane, showed appreciable bone formation. Significantly, osteoid islands had fused in the membrane group by 8 weeks. The infiltration of fibrous tissues was blocked by the alginate membrane, and the ingrowth of new bone was enhanced. Immunocytochemical analysis indicated that the dual membrane could direct more proteins which control mineralization and convene osteoconductive properties of tissue-engineered bone grafts.

Asymmetric resorbable-based dental barrier membrane for periodontal guided tissue regeneration and guided bone regeneration: A review

Guided tissue regeneration (GTR) and guided bone regeneration (GBR) are two common dental regenerative treatments targeted at reconstructing damaged periodontal tissue and bone caused by periodontitis. During GTR/GBR treatment, a barrier membrane is placed in the interface between the soft tissue and the periodontal defect to inhibit soft tissue ingrowth and creating a space for the infiltration of slow-growing bone cells into the defect site. Recently, asymmetric resorbable-based barrier membrane has received a considerable attention as a new generation of GTR/GBR membrane. Despite numerous literatures about asymmetric-based membrane that had been published, there is lacks comprehensive review on asymmetric barrier membrane that particularly highlight the importance of membrane structure for periodontal regeneration. In this review, we systematically cover the latest development and advancement of various kinds of asymmetric barrier membranes used in periodontal GTR/GBR application. Herein, the ideal requirements for constructing a barrier membrane as well as the rationale behind the asymmetric design, are firstly presented. Various innovative methods used in fabricating asymmetric barrier membrane are being further discussed. Subsequently, the application and evaluation of various types of asymmetric barrier membrane used for GTR/GBR are compiled and extensively reviewed based on the recent literatures reported. Based on the existing gap in this field, the future research directions of asymmetric resorbable-based barrier membrane such as its combination potential with bone grafts, are also presented.

PCL-PEG copolymer based injectable thermosensitive hydrogels

A number of stimuli-responsive-based hydrogels has been widely explored in biomedical applications in the last few decades because of their excellent biodegradability and biocompatibility. The development of synthetic chemistry and materials science leads to the emergence of in situ stimuli-responsive hydrogels. In this regard, several synthetic and natural polymers have been synthesized and utilized to prepare temperature-sensitive in situ forming hydrogels. This could be best used via injections as temperature stimulus could trigger in situ hydrogels gelation and swelling behaviors. There are many smart polymers available for the formulation of the in situ based thermoresponsive injectable hydrogel. Among these, poly (ε-caprolactone) (PCL) polymer has been recognized and approved by the FDA for numerous biomedical applications. More specifically, the PCL is coupled with polyethylene glycol (PEG) to obtain amphiphilic thermosensitive "smart" copolymers (PCL-PEG), to form rapid and reversible physical gelation behavior. However, the chemical structure of the copolymer is a critical aspect in determining water solubility, thermo-gelation behavior, drug release rate, degradation rate, and the possibility to deliver a diverse range of drugs. In this review, we have highlighted the typical PCL-PEG-based thermosensitive injectable hydrogels progress in the last decade for tissue engineering and localized drug delivery applications to treat various diseases. Additionally, the impact of molecular weight of PCL-PEG upon gelling behavior has also been critically highlighted for optimum hydrogels properties for potential pharmaceutical and biomedical applications.

Natural Fiber-Reinforced Polycaprolactone Green and Hybrid Biocomposites for Various Advanced Applications

Recent developments within the topic of biomaterials has taken hold of researchers due to the mounting concern of current environmental pollution as well as scarcity resources. Amongst all compatible biomaterials, polycaprolactone (PCL) is deemed to be a great potential biomaterial, especially to the tissue engineering sector, due to its advantages, including its biocompatibility and low bioactivity exhibition. The commercialization of PCL is deemed as infant technology despite of all its advantages. This contributed to the disadvantages of PCL, including expensive, toxic, and complex. Therefore, the shift towards the utilization of PCL as an alternative biomaterial in the development of biocomposites has been exponentially increased in recent years. PCL-based biocomposites are unique and versatile technology equipped with several importance features. In addition, the understanding on the properties of PCL and its blend is vital as it is influenced by the application of biocomposites. The superior characteristics of PCL-based green and hybrid biocomposites has expanded their applications, such as in the biomedical field, as well as in tissue engineering and medical implants. Thus, this review is aimed to critically discuss the characteristics of PCL-based biocomposites, which cover each mechanical and thermal properties and their importance towards several applications. The emergence of nanomaterials as reinforcement agent in PCL-based biocomposites was also a tackled issue within this review. On the whole, recent developments of PCL as a potential biomaterial in recent applications is reviewed.

Implantation of stem cells on synthetic or biological scaffolds: an overview of bone regeneration

Humans are exposed to a wide range of bone tissue injuries. In severe cases, bone damages could be only treated with transplantation of autologous or allogeneic grafting.In recent years, tissue engineering has become a promising strategy for repairing damaged organs and tissues, providing a great opportunity to cure several diseases. Bone tissue engineering consists of three components: scaffold, cells, and growth factors. Current bone tissue engineering strategies combine the use of stem cells with biologically active materials and gene therapy to mimic the natural microenvironment of bone. The combination of the scaffold with growth factors and extracellular matrix protein molecules can promote cell attachment, proliferation, and induce osteogenesis, which could provide signals for cell migration to begin the healing process during repair and bone formation.This article reviews the principles of bone regeneration and the most current developments of bone tissue engineering related to bone growth factors, the biologically active materials, such as bacterial cellulose, and stem cells.

3D porous PCL-PEG-PCL / strontium, magnesium and boron multi-doped hydroxyapatite composite scaffolds for bone tissue engineering

Bioceramic/polymer composite systems have gained importance in treating hard tissue damages using bone tissue engineering (BTE). In this context, it was aimed to develop 3D porous composite PCL-PEG-PCL scaffolds containing different amounts of B, Sr and Mg multi-doped HA that can provide bone regeneration in the bone defect area and to investigate the effect of both the amount of inorganic phase and the porosity on the mechanical and the biological properties. B-Sr-Mg multi-doped HA and PCL-PEG-PCL copolymer were successfully synthesized. PCL-PEG-PCL composite scaffolds containing different amounts of hydroxyapatite (HA) (10% and 20 wt%) were produced with the desired porosity (50% and 60%) by compression-molding and particulate leaching method. The porosity of the scaffolds was determined between 47% and 59%. HA/PCL-PEG-PCL composite scaffolds were subjected to a 3-week degradation test and showed negligible (0.2-0.5%) degradation. The water uptake percentage of the composite scaffolds with 60% porosity was the highest among all groups. Presence of HA in the scaffolds improved the water adsorption and the mechanical properties. Compressive strength of the scaffolds was between 9.32 and 24.27 MPa and 20% 2Sr0.5BHA scaffolds were found to have the maximum compressive strength. Compressive strength of 50% porous samples was higher than that of 60% porous samples. In the relative cell viability (%) test, the highest viability was observed on the scaffolds with HA and 2Sr0.5BHA. The specific ALP activity level of the cells on the scaffolds containing 2Sr0.5BHA was significantly higher (2.6 times) than that of the control group. The amount of porosity did not make a significant difference in cellular response. It was concluded that PCL-PEG-PCL composite scaffolds with 2Sr0.5BHA have the potential to be used in BTE.

An Insight into Nano Silver Fluoride-Coated Silk Fibroin Bioinspired Membrane Properties for Guided Tissue Regeneration

The current work focuses on the development of a novel electrospun silk fibroin (SF) nonwoven mat as a GTR membrane with antibacterial, biomineralization and biocompatible properties. The γ-poly glutamic acid (γ-PGA)-capped nano silver fluoride (NSF) and silver diamine fluoride (SDF) were first synthesized, which were dip-coated onto electrospun silk fibroin mats (NSF-SF and SDF-SF). UV-Vis spectroscopy and TEM depicted the formation of silver nanoparticles. NSF-SF and SDF-SF demonstrated antibacterial properties (against Porphyromonas gingivalis) with 3.1 and 6.7 folds higher relative to SF, respectively. Post-mineralization in simulated body fluid, the NSF-SF effectively promoted apatite precipitation (Ca/P ~1.67), while the SDF-SF depicted deposition of silver nanoparticles, assessed by SEM-EDS. According to the FTIR-ATR deconvolution analysis, NSF-SF portrayed ~75% estimated hydroxyapatite crystallinity index (CI), whereas pure SF and SDF-SF demonstrated ~60%. The biocompatibility of NSF-SF was ~82% when compared to the control, while SDF-coated samples revealed in vitro cytotoxicity, further needing in vivo studies for a definite conclusion. Furthermore, the NSF-SF revealed the highest tensile strength of 0.32 N/mm and 1.76% elongation at break. Therefore, it is substantiated that the novel bioactive and antibacterial NSF-SF membranes can serve as a potential candidate, shedding light on further in-depth analysis for GTR applications.

Physical and biological performances of a semi-resorbable barrier membrane based on silk fibroin-glycerol-fish collagen material for guided bone regeneration

The fragility of silk fibroin film is a drawback to being used as a barrier membrane. Semi-resorbable barrier membranes maintain function longer than a resorbable membrane and no need to be removed. The study aimed to fabricate semi-resorbable membranes using silk fibroin with glycerol plasticizer (Group A), immobilized with fish collagen (Group B), and then characterized, in vitro biocompatibility tested, and compared with a commercial collagen membrane (Group C). Group B showed more roughness (0.2155 µm) than Group A (0.1424 µm). Group A was more hydrophilic (76.75° ± 3.07°) and more stiffness (28.93% ± 15.56%) than Group B (112.67° ± 1.94°, 42.10% ± 11.46%) and C (54.79% ± 13.44%) without significant difference. Group C had a significantly higher (p < 0.05) swelling degree and less degradation rate than others. Group A showed significantly highest (p < 0.05) cell proliferation. Group C showed more alkaline phosphatase activity than others but no significant difference in osteocalcin and Alizarin Red activity on day 21. The semi-resorbable membrane based on silk fibroin-glycerol possessed good physical and mechanical properties, and well-supported osteoblastic cell proliferation and differentiation.

Zn-substituted Mg2SiO4 nanoparticles-incorporated PCL-silk fibroin composite scaffold: A multifunctional platform towards bone tissue regeneration

Electrospun porous bone scaffolds are known to imitate the extracellular matrix very well and provide an environment through which the tissue formation is enhanced. Although polymeric scaffolds have a great potential in bone tissue regeneration, their weak bioactivity (bone bonding ability) and mechanical properties have left room for improvement. Therefore, the present study focused on the developing a ternary multifunctional platform composed of polycaprolactone (PCL)/silk fibroin (SF)/Zn-substituted Mg₂SiO₄ nanoparticles for bone tissue regeneration. This study is composed of two connected sections including synthesis and characterization of Mg_(2-x)Zn_xSiO₄, x = 0, 0.5, 1, 1.5, 2 through surfactant-assisted sol-gel technique followed by incorporation of the nanoparticles into PCL/SF hybrid scaffold via electrospinning technique. The weight ratios of polymers and ceramic nanoparticles were optimized to reach desirable textural-porosity, pore size, and fiber diameter-and mechanical properties. Having optimized the ternary scaffold, it was then undergone different physical, chemical, and biological tests in vitro. A precise comparison study between the ternary (PCL/SF/ceramic nanoparticles), binary (PCL/SF), and pure PCL was made to shed light on the effect of each composition on the applicability of ternary scaffold. The overall results confirmed that the Mg₁Zn₁SiO₄ nanoparticles-incorporated PCL/SF scaffold with fluorescence property was the one yielding the highest Young's modulus and desirable textural properties. The ternary scaffold showed improved biological properties making it a promising candidate for further studies towards bone tissue regeneration.

Periosteal Tissue Engineering: Current Developments and Perspectives

Periosteum, a highly vascularized bilayer connective tissue membrane plays an indispensable role in the repair and regeneration of bone defects. It is involved in blood supply and delivery of progenitor cells and bioactive molecules in the defect area. However, sources of natural periosteum are limited, therefore, there is a need to develop tissue-engineered periosteum (TEP) mimicking the composition, structure, and function of natural periosteum. This review explores TEP construction strategies from the following perspectives: i) different materials for constructing TEP scaffolds; ii) mechanical properties and surface topography in TEP; iii) cell-based strategies for TEP construction; and iv) TEP combined with growth factors. In addition, current challenges and future perspectives for development of TEP are discussed.

Electrospraying as a novel process for the synthesis of particles/nanoparticles loaded with poorly water-soluble bioactive molecules

Hydrophobicity and low aqueous-solubility of different drugs/nutraceuticals remain a persistent challenge for their development and clinical/food applications. A range of nanotechnology strategies have been implemented to address this issue, and amongst which a particular emphasis has been made on those that afford an improved biological performance and tunable release kinetic of bioactives through a one-step process. More recently, the technique of electrospraying (or electrohydrodynamic atomization) has attained notable impulse in virtue of its potential to tune attributes of nano/micro-structured particles (e.g., porosity, particle size, etc.), rendering a near zero-order release kinetics, diminished burst release manner, as well as its simplicity, reproducibility, and applicability to a broad spectrum of hydrophobic and poorly water-soluble bioactives. Controlled morphology or monodispersity of designed particles could be properly obtained via electrospraying, with a high encapsulation efficiency and without unfavorable denaturation of thermosensitive bioactives upon encapsulation. This paper overviews the recent technological advances in electrospraying for the encapsulation of low queues-soluble bioactive agents. State-of-the-art, advantages, applications, and challenges for its implementation in pharmaceutical/food researches are also discussed.

How does high-pressure CO2 affect the morphology of PCL/PLA blends? Visualization of phase separation using in situ ATR-FTIR spectroscopic imaging

Studies of phase separation in lower critical solution temperature (LCST) polymer blends exposed to high-pressure CO₂ provide an insight to their physical properties. Through using in situ high-pressure ATR-FTIR spectroscopic imaging, this work visualized the dynamic process of phase separation in Polycaprolactone (PCL)/Poly (lactic acid) (PLA) blend under high-pressure CO₂ for the first time. ATR-FTIR spectroscopic images revealed that phase separation in PCL/PLA blends occurs with increasing temperature or upon exposure to high-pressure CO₂. The change in the morphology of PCL-rich and PLA-rich domains in the ATR-FTIR spectroscopic images can be used to compare the extent of phase separation under different conditions. It is found that the extent of phase separation in PCL/PLA blends under high-pressure CO₂ is enhanced with increasing temperature, CO₂ pressure and exposure time. The effect of different molecular weights of one blend component, PCL, on the phase separation in PCL/PLA blends was also studied. This pioneering methodology opens possibilities to visualize the process of phase separation in LCST polymer blend systems and it can also be applied to study the process of interdiffusion in upper critical solution temperature (UCST) polymer blends.

M-keratin nano-materials create a mineralized micro-circumstance to promote proliferation and differentiation of DPSCs

As traditional root canal obturation leads to the loss of the biological activity of the tooth, it is necessary to develop a material that promotes the regeneration of dental tissue. However, this remains a challenging task. Our study aims to construct a mineralized material to support the proliferation and differentiation of dental pulp stem cells (DPSCs), and to explore a new strategy for the treatment of pulp tissue necrosis. Mineralized keratin (M-keratin), defined as keratin that has been mineralized in simulated body fluid, was first harvested to construct the root canal filling material. Characterizations indicated that new substances or components were formed on the surface of keratin particles after mineralization, and the morphology of the keratin was changed. M-keratin promoted the growth, proliferation, and differentiation of DPSCs. After cultivation with M-keratin, DPSCs exhibited more extracellular matrix proteins interacting with the culture interface, the number of these cells increased significantly, and the 3-[4,5-dimethylthiazol-2-yl-]-2,5-diphenyltetrazolium bromide values of cells in the experimental group also increased. Meanwhile, signs that the DPSCs began to differentiate into odontoblasts were observed or detected by alizarin red S staining, ELISA, RNA-Seq, and western blot. We hope that this study will contribute to the development of a new material that promotes the regeneration of dental tissue as well as providing new ideas and strategies for the treatment of dental pulp disease.

Tissue engineering stent model with long fiber-reinforced thermoplastic technique

This study aims to construct tissue engineering stents by using the long fiber-reinforced thermoplastic (LFT) technique to develop artery stents. The experimental method combines fibers, the LFT technique, and electrospinning technique. First, the biodegradable polyvinyl alcohol yarns are twisted and coated in polycaprolactone/polyethylene glycol blends through the LFT technique. Next, the weft-knitting and heat treatment are used to establish the stent structure, after which poly(ethylene oxide) (PEO) is electrospun to coat the stents. The morphology, mechanical, and biological properties of tissue engineering stents are evaluated. The test results indicated that the use of the LFT technique retains the softness of filaments, which facilitates the subsequent weft-knitting process. The coating of blends and electrospinning of PEO have a positive influence on the tissue engineering stents, as demonstrated by the tensile strength of 59.93 N and compressive strength of 6.10 N. Moreover, the in vitro degradation of stents exhibits a stabilized process. The water contact angle is 20.33°, and the cell survival rate in 24 h is over 80%. The proposed tissue engineering stents are good candidates for artery stent structure.

Advances of nanomaterial applications in oral and maxillofacial tissue regeneration and disease treatment

Using bioactive nanomaterials in clinical treatment has been widely aroused. Nanomaterials provide substantial improvements in the prevention and treatment of oral and maxillofacial diseases. This review aims to discuss new progresses in nanomaterials applied to oral and maxillofacial tissue regeneration and disease treatment, focusing on the use of nanomaterials in improving the quality of oral and maxillofacial healthcare, and discuss the perspectives of research in this arena. Details are provided on the tissue regeneration, wound healing, angiogenesis, remineralization, antitumor, and antibacterial regulation properties of nanomaterials including polymers, micelles, dendrimers, liposomes, nanocapsules, nanoparticles and nanostructured scaffolds, etc. Clinical applications of nanomaterials as nanocomposites, dental implants, mouthwashes, biomimetic dental materials, and factors that may interact with nanomaterials behaviors and bioactivities in oral cavity are addressed as well. In the last section, the clinical safety concerns of their usage as dental materials are updated, and the key knowledge gaps for future research with some recommendation are discussed. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement.

Current Trends in Research on Bone Regeneration: A Bibliometric Analysis

Background

Bone regeneration is a frequent research topic in clinical studies, but macroscopic studies on the clinical application of bone regeneration are rare. We conducted a bibliometric analysis, using international databases, to explore the clinical application and mechanism of bone regeneration, to highlight the relevant research hotspots and prospects. Material and Methods. Scientific reports on bone regeneration published during 2009–2019 were retrieved from PubMed. VOSviewer for cooccurrence keywords and authorship analysis. BICOMB software was used to retrieve high-frequency words and construct a text/coword matrix. The matrix was inputted into gCLUTO software, managed by biclustering analysis, in order to identify hotspots, which could achieve mountain and matrix visualizations. The matrix was also analyzed by using Ucinet 6 software for social network analysis. A strategic diagram was used for further analysis of the research hotspots of bone regeneration by “SCIMAT” software. We searched the Web of Science for relevant articles.

Results

Eighty-nine high-frequency major MeSH terms were obtained from 10237 articles and were divided into 5 clusters. We generated a network visualization map, an overlay visualization mountain map, and a social network diagram. Then, the MeSH terms were subdivided into 7 categories according to each diagram; current research hotspots were identified as scaffold, drug effect, osseointegration in dental implant, guided bone regeneration, factors impacting bone regeneration, treatment of bone and tissue loss, and bone regeneration in dental implants.

Conclusion

BICOMB, VOSviewer, and other bibliometric tools revealed that dental implants, scaffolds, and factors impacting bone regeneration are hot research topics, while scaffolds also hold promise from the perspective of bone tissue regeneration.

A pure zinc membrane with degradability and osteogenesis promotion for guided bone regeneration: In vitro and in vivo studies

Selection of an appropriate membrane material for guided bone regeneration (GBR) is still ongoing among resorbable and nonresorbable membranes with different characteristics. The major problem with nonresorbable membranes is the inevitable secondary surgery, while resorbable polymer membranes have limitations in providing sufficient mechanical support during the bone repair period due to premature loss of mechanical strength. Pure magnesium foil has been evaluated to explore its feasibility as a resorbable GBR membrane. It exhibited better mechanical properties, whereas poor formability and fast degradation rate were noted. In light of this, pure zinc membrane was developed as a pilot research in this paper. We designed three types of pure zinc membranes: pure Zn without pores, pure Zn with 300 µm diameter and 1000 µm diameter pores, and pure titanium without pores as a control. The mechanical property, in vitro immersion tests, and MC3T3-E1 cell viability assays were tested. Moreover, in vivo behaviors of three type zinc membranes were evaluated by using a rat calvarial critical-sized bone defect model. The experimental results indicated that pure Zn membrane with 300 µm pores showed the most favorable osteogenic capability, comparable to that of titanium membrane without pores. Therefore, considering appropriate degradation rate, adequate mechanical maintenance, and profitable osteogenic capacity, metallic pure zinc is believed to be a promising candidate for barrier membranes in GBR therapy for bone regeneration, and its mechanical property can be enhanced with further alloying. STATEMENT OF SIGNIFICANCE: Metallic element zinc plays a pivotal role in the growth and mineralization of bone tissues. As a pilot research, three type of guided bone regeneration (GBR) membranes were developed in the present work: pure Zn without pores, pure Zn with 300 µm-diameter and 1000 µm-diameter pores respectively. The mechanical property, in vitro immersion tests and MC3T3-E1 cell viability assays were tested, with pure titanium without pores as a control, thereafter the in vivo performance were evaluated by using a rat calvarial critical-sized bone defect model. It indicated that pure Zn membrane with 300 µm pores showed the most favorable osteogenic capability, comparable to that of titanium membrane control, and is believed to be a promising material candidate as barrier membrane in GBR therapy for bone regeneration.

Development and characterisation of bilayered periosteum-inspired composite membranes based on sodium alginate-hydroxyapatite nanoparticles

BACKGROUND AND AIM

Membranes for guided bone regeneration should have a mechanical structure and a chemical composition suitable for mimicking biological structures. In this work, we pursue the development of periosteum-inspired bilayered membranes obtained by crosslinking alginate with different amounts of nanohydroxyapatite.

EXPERIMENTS

Alginate-nanohydroxyapatite interaction was studied by rheology and infrared spectroscopy measurements. The membranes were characterized regarding their tensile strength, degradation and surface morphology. Finally, cell cultures were performed on each side of the membranes.

FINDINGS

The ionic bonding between alginate polysaccharide networks and nanohydroxyapatite was proven, and had a clear effect in the strength and microstructure of the hydrogels. Distinct surface characteristics were achieved on each side of the membranes, resulting in a highly porous fibrous side and a mineral-rich side with higher roughness and lower porosity. Moreover, the effect of amount of nanohydroxyapatite was reflected in a decrease of the membranes' plasticity and an increment of degradation rate. Finally, it was proved that osteoblast-like cells proliferated and differentiated on the mineral-rich side, specially when a higher amount of nanohydroxyapatite was used, whereas fibroblasts-like cells were able to proliferate on the fibrous side. These periosteum-inspired membranes are promising biomaterials for guided tissue regeneration applications.

In vitro evaluation of bilayer membranes of PLGA/hydroxyapatite/β-tricalcium phosphate for guided bone regeneration

Membranes for guided bone regeneration represent valuable resources, preventing fibroblast infiltration and aiding anatomical bone reconstruction. Nonetheless, available membranes lack bone regenerative capacity, suitable mechanical behavior, or adequate degradation profile. Therefore, to overcome these limitations, this study developed bilayer membranes with a dense layer (dry phase inversion) of PLGA (poly(lactic-co-glycolic acid)):HAp (hydroxyapatite) - 95:05 (wt%) - and an electrospun layer of PLGA and HAp:β-TCP (β-tricalcium phosphate) with ratios of 60:40, 70:30 and 85:15 (wt%), evaluating its mechanical, morphological and in vitro properties. The bilayer membranes displayed adequate interlayer adhesion, dense layer pore size of 4.20 μm and electrospun layer with porosity degree of 38.2%, thus capable of preventing fibroblast infiltration while allowing osteoblast migration and nutrient permeation. They also showed T_g of 82 °C and higher storage modulus, which was constant up to 54.6 °C, characteristics important for membrane implantation and use with no mechanical compromise. In vitro degradation mass loss was only 10% after 60 days, a profile suitable for the application requirement. Membranes with calcium phosphates had better osteoblast attachment, proliferation and migration. Taken together, results indicate the great potential of PLGA/HAp/β-TCP bilayer membranes on bone reconstruction with proper degradation profile, morphology, mechanical behavior and bone regenerative capacity.

Recent trends in the application of widely used natural and synthetic polymer nanocomposites in bone tissue regeneration

The goal of a biomaterial is to support the bone tissue regeneration process at the defect site and eventually degrade in situ and get replaced with the newly generated bone tissue. Nanocomposite biomaterials are a relatively new class of materials that incorporate a biopolymeric and biodegradable matrix structure with bioactive and easily resorbable fillers which are nano-sized. This article is a review of a few polymeric nanocomposite biomaterials which are potential candidates for bone tissue regeneration. These nanocomposites have been broadly classified into two groups viz. natural and synthetic polymer based. Natural polymer-based nanocomposites include materials fabricated through reinforcement of nanoparticles and/or nanofibers in a natural polymer matrix. Several widely used natural biopolymers, such as chitosan (CS), collagen (Col), cellulose, silk fibroin (SF), alginate, and fucoidan, have been reviewed regarding their present investigation on the incorporation of nanomaterial, biocompatibility, and tissue regeneration. Synthetic polymer-based nanocomposites that have been covered in this review include polycaprolactone (PCL), poly (lactic-co-glycolic) acid (PLGA), polyethylene glycol (PEG), poly (lactic acid) (PLA), and polyurethane (PU) based nanocomposites. An array of nanofillers, such as nano hydroxyapatite (nHA), nano zirconia (nZr), nano silica (nSi), silver nano particles (AgNPs), nano titanium dioxide (nTiO₂), graphene oxide (GO), that is used widely across the bone tissue regeneration research platform are included in this review with respect to their incorporation into a natural and/or synthetic polymer matrix. The influence of nanofillers on cell viability, both in vitro and in vivo, along with cytocompatibility and new tissue generation has been encompassed in this review. Moreover, nanocomposite material characterization using some commonly used analytical techniques, such as electron microscopy, spectroscopy, diffraction patterns etc., has been highlighted in this review. Biomaterial physical properties, such as pore size, porosity, particle size, and mechanical strength which strongly influences cell attachment, proliferation, and subsequent tissue growth has been covered in this review. This review has been sculptured around a case by case basis of current research that is being undertaken in the field of bone regeneration engineering. The nanofillers induced into the polymeric matrix render important properties, such as large surface area, improved mechanical strength as well as stability, improved cell adhesion, proliferation, and cell differentiation. The selection of nanocomposites is thus crucial in the analysis of viable treatment strategies for bone tissue regeneration for specific bone defects such as craniofacial defects. The effects of growth factor incorporation on the nanocomposite for controlling new bone generation are also important during the biomaterial design phase.

A Critical Review on the Production of Electrospun Nanofibres for Guided Bone Regeneration in Oral Surgery

Nanofibre-based membranes or scaffolds exhibit high surface-to-volume ratio, which allows an improved cell adhesion, representing an attractive subgroup of biomaterials due to their unique properties. Among several techniques of nanofiber production, electrospinning is a cost-effective technique that has been, to date, attractive for several medical applications. Among these, guided bone regeneration is a surgical procedure in which bone regeneration, due to bone atrophy following tooth loss, is "guided" by an occlusive barrier. The membrane should protect the initial blood clot from any compression, shielding the bone matrix during maturation from infiltration of soft tissues cells. This review will focus its attention on the application of electrospinning (ELS) in oral surgery bone regeneration. Despite the abundance of published papers related to the electrospinning technique applied in the field of bone regeneration of the jaws, to the authors' knowledge, no articles report clinical application of these structures. Moreover, only a few records can be found with in vivo application. Therefore, no human studies have to date been detectable. New approaches such as multifunctional multilayering and coupling with bone promoting factors or antimicrobial agents, makes this technology very attractive. However, greater efforts should be made by researchers and companies to turn these results into clinical practice.

Highly polydisperse keratin rich nanofibers: Scaffold design and in vitro characterization

The use of bioactive proteins such as keratin has been successfully explored to improve the biological interface of scaffolds with cells during the tissue regeneration. In this work, it is optimized the fabrication of nanofibers combining wool keratin extracted by sulfitolysis, with polycaprolactone (PCL) in order to design bicomponent fibrous matrices able to exert a self-adapting pattern of signals-morphological, chemical, or physical-confined at the single fiber level, to influence cell and bacteria interactions. It is demonstrated that the blending of highly polydisperse keratin with PCL (50:50) improves the stability of the electrospinning process, promoting the formation of nanofibers-144.1 ± 43.9 nm-without the formation of defects (i.e., beads, ribbons) typically recognized in the fabrication of keratin ones. Moreover, keratin drastically increases the fiber hydrophilicity-compared with PCL fiber alone-thus improving the hMSC adhesion and in vitro proliferation until 14 days. Moreover, the growth of bacterial strains (i.e., Escherichia coli and Staphylococcus aureus) seems to be not specifically inhibited by the contribution of keratin, so that the integration of further selected compounds (i.e., metal ions) is suggested to more efficiently fight against bacteria resistance, to make them suitable for the regeneration of different interfaces and soft tissues (i.e., skin and cornea). © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1803-1813, 2019.

Microporous elastomeric membranes fabricated with polyglycerol sebacate improved guided bone regeneration in a rabbit model

Purpose

We aimed to fabricate guided bone regeneration (GBR) membrane using polyglycerol sebacate (PGS) and investigate the impact of scaffold pore size on osteogenesis.

Materials and methods

PGS microporous membrane was fabricated by salt-leaching technique with various pore sizes. Twenty-eight male New Zealand rabbits were randomly divided into four groups: 25 µm PGS membrane, 53 µm PGS membrane, collagen membrane, and blank control group. Subsequently, standardized and critical-sized tibia defects were made in rabbits and the defective regions were covered with the specifically prepared membranes. After 4 and 12 weeks of in vivo incubation, bone samples were harvested from tibia. Micro-computed tomography scanning was performed on all bone samples. A three-dimensional visible representation of the constructs was obtained and used to compare the ratios of the ossifying volume to total construct volume (bone volume to tissue volume [BV/TV]) of each sample in different groups; then, bone samples were stained with H&E and Masson's trichrome stain for general histology.

Results

At 4 weeks, the BV/TV in the 25 µm PGS group was found higher than that in the 53 µm PGS and collagen groups. At 12 weeks, the bone defect site guided by the 25 µm PGS membrane was almost completely covered by the new bone. However, the site guided by the 53 µm PGS membrane or collagen membrane was covered only most of the defects and the left part of the defect was unoccupied. Histological observation further verified these findings.

Conclusion

We thus concluded that the 25 µm PGS membrane played an advantageous role during 4-12 weeks as compared with those earlier degraded counterparts.

Dual functional electrospun core-shell nanofibers for anti-infective guided bone regeneration membranes

In clinic infection is the paramount cause for failure of guided bone regeneration (GBR) membranes. Therefore, it is crucial to develop anti-infective GBR membranes for clinical bone repair application. In this research, we successfully prepared electrospun core-shell nanofibers loaded with metronidazole (MNA) and nano-hydroxyapatites (nHA), which could be employed for anti-infective GBR membranes due to the achievement of dual functions with enhanced osteogenesis and slow MNA release. The nanofiber shell was composed of polycaprolactone and nHA, whilst the nanofiber core was gelatin and MNA. The MNA release and cell proliferation experiments showed that compared with directly MNA-loaded nanofibers, the core-shell nanofibers possessed slower MNA release profile, which resulted in the decrease in cytotoxicity of MNA to bone mesenchymal stem cells. The osteogenic measurements demonstrated that the core-shell nanofibers could enhance bone formation. Additionally, the anti-bacterial experiments indicated that the core-shell nanofibers could prevent colonization of anaerobic bacteria. In summary, the results in the present study revealed the potential of the core-shell electrospun nanofibers with dual functions of enhanced osteogenesis and anti-infection for optimal clinical application as GBR membranes.

Electrospun nanofiber blend with improved mechanical and biological performance

Background

Here, electrospun fibers based on a blend of polycaprolactone (PCL), poly(ethylene glycol) (PEG), and gelatin methacryloyl (GelMA) were developed. The careful choice of this polymer combination allowed for the preparation of a biomaterial that preserved the mechanical strength of PCL, while at the same time improving the hydrophilicity of the blended material and human osteoblast maturation.

Methods

The morphology, chemical structure, wettability, and mechanical properties before and after UV photocrosslinking were evaluated. Furthermore, human osteoblasts (hFOB) were cultivated for up to 21 days on the scaffolds, and their potential to upregulate cell proliferation, alkaline phosphatase (ALP) activity, and calcium deposition were investigated.

Results

Contact angle measurement results showed that the developed scaffolds presented hydrophilic properties after PEG and GelMA incorporation before (25°) and after UV photocross-linking (69°) compared to pure PCL (149°). PCL:PEG:GelMA-UV displayed a slight increase in mechanical strength (elastic modulus ~37 MPa) over PCL alone (~33 MPa). Normally, an increase in strength of fibers leads to a decrease in elongation at break, due to the material becoming less deformable and stiffer, thus leading to breaks at low strain. This behavior was observed by comparing PCL (elongation at break ~106%) and PCL:PEG:GelMA-UV (~50%). Moreover, increases in ALP activity (10-fold at day 14) and calcium deposition (1.3-fold at day 21) by hFOBs were detected after PEG and GelMA incorporation after UV photocross-linking compared to pure PCL. Ultrathin and hydrophilic fibers were obtained after PEG and GelMA incorporation after UV photocrosslinking, but the strength of PCL was maintained. Interestingly, those ultrathin fiber characteristics improved hFOB functions.

Conclusion

These findings appear promising for the use of these electrospun scaffolds, based on the combination of polymers used here for numerous orthopedic applications.

Multifunctional smart hydrogels: potential in tissue engineering and cancer therapy

In recent years, clinical applications have been proposed for various hydrogel products. Hydrogels can be derived from animal tissues, plant extracts and/or adipose tissue extracellular matrices; each type of hydrogel presents significantly different functional properties and may be used for many different applications, including medical therapies, environmental pollution treatments, and industrial materials. Due to complicated preparation techniques and the complexities associated with the selection of suitable materials, the applications of many host-guest supramolecular polymeric hydrogels are limited. Thus, improvements in the design and construction of smart materials are highly desirable in order to increase the lifetimes of functional materials. Here, we summarize different functional hydrogels and their varied preparation methods and source materials. The multifunctional properties of hydrogels, particularly their unique ability to adapt to certain environmental stimuli, are chiefly based on the incorporation of smart materials. Smart materials may be temperature sensitive, pH sensitive, pH/temperature dual sensitive, photoresponsive or salt responsive and may be used for hydrogel wound repair, hydrogel bone repair, hydrogel drug delivery, cancer therapy, and so on. This review focuses on the recent development of smart hydrogels for tissue engineering applications and describes some of the latest advances in using smart materials to create hydrogels for cancer therapy.