Bioengineered percutaneous heart valves for transcatheter aortic valve replacement: a comparative evaluation of decellularised bovine and porcine pericardia

Recent Advances in the Modification and Improvement of Bioprosthetic Heart Valves

Valvular heart disease (VHD) has become a burden and a growing public health problem in humans, causing significant morbidity and mortality worldwide. An increasing number of patients with severe VHD need to undergo heart valve replacement surgery, and artificial heart valves are in high demand. However, allogeneic valves from donors are lacking and cannot meet clinical practice needs. A mechanical heart valve can activate the coagulation pathway after contact with blood after implantation in the cardiovascular system, leading to thrombosis. Therefore, bioprosthetic heart valves (BHVs) are still a promising way to solve this problem. However, there are still challenges in the use of BHVs. For example, their longevity is still unsatisfactory due to the defects, such as thrombosis, structural valve degeneration, calcification, insufficient re-endothelialization, and the inflammatory response. Therefore, strategies and methods are needed to effectively improve the biocompatibility and longevity of BHVs. This review describes the recent research advances in BHVs and strategies to improve their biocompatibility and longevity.

Strengthened Decellularized Porcine Valves via Polyvinyl Alcohol as a Template Improving Processability

The heart valve is crucial for the human body, which directly affects the efficiency of blood transport and the normal functioning of all organs. Generally, decellularization is one method of tissue-engineered heart valve (TEHV), which can deteriorate the mechanical properties and eliminate allograft immunogenicity. In this study, removable polyvinyl alcohol (PVA) is used to encapsulate decellularized porcine heart valves (DHVs) as a dynamic template to improve the processability of DHVs, such as suturing. Mechanical tests show that the strength and elastic modulus of DHVs treated with different concentrations of PVA significantly improve. Without the PVA layer, the valve would shift during suture puncture and not achieve the desired suture result. The in vitro results indicate that decellularized valves treated with PVA can sustain the adhesion and growth of human umbilical vein endothelial cells (HUVECs). All results above show that the DHVs treated with water-soluble PVA have good mechanical properties and cytocompatibility to ensure post-treatment. On this basis, the improved processability of DHV treated with PVA enables a new paradigm for the manufacturing of scaffolds, making it easy to apply.

Challenges of aortic valve tissue culture - maintenance of viability and extracellular matrix in the pulsatile dynamic microphysiological system

BACKGROUND

Calcific aortic valve disease (CAVD) causes an increasing health burden in the 21st century due to aging population. The complex pathophysiology remains to be understood to develop novel prevention and treatment strategies. Microphysiological systems (MPSs), also known as organ-on-chip or lab-on-a-chip systems, proved promising in bridging in vitro and in vivo approaches by applying integer AV tissue and modelling biomechanical microenvironment. This study introduces a novel MPS comprising different micropumps in conjunction with a tissue-incubation-chamber (TIC) for long-term porcine and human AV incubation (pAV, hAV).

RESULTS

Tissue cultures in two different MPS setups were compared and validated by a bimodal viability analysis and extracellular matrix transformation assessment. The MPS-TIC conjunction proved applicable for incubation periods of 14-26 days. An increased metabolic rate was detected for pulsatile dynamic MPS culture compared to static condition indicated by increased LDH intensity. ECM changes such as an increase of collagen fibre content in line with tissue contraction and mass reduction, also observed in early CAVD, were detected in MPS-TIC culture, as well as an increase of collagen fibre content. Glycosaminoglycans remained stable, no significant alterations of α-SMA or CD31 epitopes and no accumulation of calciumhydroxyapatite were observed after 14 days of incubation.

CONCLUSIONS

The presented ex vivo MPS allows long-term AV tissue incubation and will be adopted for future investigation of CAVD pathophysiology, also implementing human tissues. The bimodal viability assessment and ECM analyses approve reliability of ex vivo CAVD investigation and comparability of parallel tissue segments with different treatment strategies regarding the AV (patho)physiology.

A chlorogenic acid functional strategy of anti-inflammation, anti-coagulation and promoted endothelial proliferation for bioprosthetic artificial heart valves

Heart valve replacement has become an optimal choice for the treatment of severe heart valve disease. At present, most commercial bioprosthetic heart valves (BHVs) are made from porcine pericardium or bovine pericardium treated with glutaraldehyde. Nevertheless, due to the toxicity of residual aldehyde groups left after glutaraldehyde cross-linking, these commercial BHVs exhibit poor biocompatibility, calcification, risk of coagulation and endothelialization difficulty, which greatly affects the durability of the BHVs and shortens their service life. In this work, based on a chlorogenic acid functional anti-inflammation, anti-coagulation and endothelialization strategy and dual-functional non-glutaraldehyde cross-linking reagent OX-CO, a kind of functional BHV material OX-CA-PP has been developed from OX-CO cross-linked porcine pericardium (OX-CO-PP) followed by the convenient modification of chlorogenic acid through a reactive oxygen species (ROS) sensitive borate ester bond. The functionalization of chlorogenic acid can reduce the risk of valve leaf thrombosis and promote endothelial cell proliferation, which is beneficial to the formation of a long-term interface with good blood compatibility. Meanwhile, such a ROS responsive behavior can trigger intelligent release of chlorogenic acid on-demand to achieve the inhibition of acute inflammation at the early stage of implantation. The in vivo and in vitro experimental results show that the functional BHV material OX-CA-PP exhibits superior anti-inflammation, improved anti-coagulation, minimal calcification and promoted proliferation of endothelial cells, showing that this non-glutaraldehyde functional strategy has great potential for the application of BHVs and providing a promising reference for other implanted biomaterials.

Hybrid heart valves with VEGF-loaded zwitterionic hydrogel coating for improved anti-calcification and re-endothelialization

With the aging of the population in worldwide, valvular heart disease has become one of the most prominent life-threatening diseases in human health, and heart valve replacement surgery is one of the therapeutic methods for valvular heart disease. Currently, commercial bioprosthetic heart valves (BHVs) for clinical application are prepared with xenograft heart valves or pericardium crosslinked by glutaraldehyde. Due to the residual cell toxicity from glutaraldehyde, heterologous antigens, and immune response, there are still some drawbacks related to the limited lifespan of bioprosthetic heart valves, such as thrombosis, calcification, degeneration, and defectiveness of re-endothelialization. Therefore, the problems of calcification, defectiveness of re-endothelialization, and poor biocompatibility from the use of bioprosthetic heart valve need to be solved. In this study, hydrogel hybrid heart valves with improved anti-calcification and re-endothelialization were prepared by taking decellularized porcine heart valves as scaffolds following grafting with double bonds. Then, the anti-biofouling zwitterionic monomers 2-methacryloyloxyethyl phosphorylcholine (MPC) and vascular endothelial growth factor (VEGF) were utilized to obtain a hydrogel-coated hybrid heart valve (PEGDA-MPC-DHVs@VEGF). The results showed that fewer platelets and thrombi were observed on the surface of the PEGDA-MPC-DHVs@VEGF. Additionally, the PEGDA-MPC-DHVs@VEGF exhibited excellent collagen stability, biocompatibility and re-endothelialization potential. Moreover, less calcification deposition and a lower immune response were observed in the PEGDA-MPC-DHVs@VEGF compared to the glutaraldehyde-crosslinked DHVs (Glu-DHVs) after subcutaneous implantation in rats for 30 days. These studies demonstrated that the strategy of zwitterionic hydrogels loaded with VEGF may be an effective approach to improving the biocompatibility, anti-calcification and re-endothelialization of bioprosthetic heart valves.

•

A new and promising strategy of overcoming defects of bioprosthetic heart valves.

•

The zwitterionic hydrogel with VEGF is utilized to improve anti-calcification and re-endothelialization properties of heart valves.

•

The hybrid heart valves with a VEGF-loaded zwitterionic hydrogel coating exhibits excellent biocompatibility.

Biomaterials for Regenerative Medicine in Italy: Brief State of the Art of the Principal Research Centers

Regenerative medicine is the branch of medicine that effectively uses stem cell therapy and tissue engineering strategies to guide the healing or replacement of damaged tissues or organs. A crucial element is undoubtedly the biomaterial that guides biological events to restore tissue continuity. The polymers, natural or synthetic, find wide application thanks to their great adaptability. In fact, they can be used as principal components, coatings or vehicles to functionalize several biomaterials. There are many leading centers for the research and development of biomaterials in Italy. The aim of this review is to provide an overview of the current state of the art on polymer research for regenerative medicine purposes. The last five years of scientific production of the main Italian research centers has been screened to analyze the current advancement in tissue engineering in order to highlight inputs for the development of novel biomaterials and strategies.