Characterization of the aging behavior of polyethylene by photoluminescence spectroscopy

Transparent bamboo as a replacement for glass: Effects of lignin decolorisation methods on weatherability

Transparent bamboo proved to be a promising substitute for glass due to its high light transmittance and excellent mechanical properties. Nevertheless, it was susceptible to outdoor weathering, which negatively affected its physical and mechanical properties. In this study, two decolorisation methods, namely the delignification method and the lignin modification method, were used to produce transparent bamboos with epoxy resin, referred to as DL-TB and LM-TB, respectively. The changes in surface color, optical and mechanical properties, wettability, thermal stability, and thermal insulation properties of transparent bamboo during accelerated UV weathering were evaluated. Additionally, the deterioration mechanism of DL-TB and LM-TB was investigated. The findings revealed that DL-TB demonstrated better transparency and mechanical properties than LM-TB, although it exhibited lower thermal insulation properties. Furthermore, DL-TB demonstrated enhanced color stability and higher hydrophobicity on weathered surfaces than LM-TB. Unexpectedly, the tensile properties of both two transparent bamboos significantly improved after weathering, especially for LM-TB, which was due to the EP post-curing and the formation of more hydrogen bonds between lignin and EP. These observations revealed that lignin played a key role in the photodegradation process of transparent bamboo, but further attempts should be made in future studies to improve its color stability.

A fluorescence approach for an online measurement technique of atmospheric microplastics

Microplastic particles in the atmosphere are regularly detected in urban areas as well as in very remote locations. Yet the sources, chemical transformation, transport, and abundance of airborne microplastics still remain largely unexplained. Therefore, their impact on health, weather and climate related processes lacks comprehensive understanding. Single particle detection presents a substantial challenge due to its time-consuming process and is conducted solely offline. To get more information about the distribution, fluxes and sources of microplastics in the atmosphere, a reliable and fast online measurement technique is of utmost importance. Here we demonstrate the use of the autofluorescence of microplastic particles for their online detection with a high sensitivity towards different widely used polymers. We deploy online, single particle fluorescence spectroscopy with a Wideband Integrated Bioaerosol Sensor WIBS 5/NEO (Droplet Measurement Technologies, USA), which enables single particle fluorescence measurements at two excitation wavelengths (280 nm and 370 nm) and in two emission windows (310-400 nm and 420-650 nm). We investigated shredded (<100 μm) everyday plastic products (drinking bottles and yogurt cups) and pure powders of polyethylene terephthalate (PET), polyethylene and polypropylene. For the broad range of typical plastic products analyzed, we detected fluorescence on a single particle level using the WIBS. The online detection can identify particles smaller than 2 μm. In the case of microplastic particles from a PET bottle, 1.2 μm sized particles can be detected with 95% efficiency. Comparison with biological aerosols reveals that microplastics can be distinguished from two abundant pollen species and investigation of the complete fluorescence excitation emission maps of all samples shows that online identification of microplastics might be possible with fluorescence techniques if multiple channels are available.

Characterization Techniques of Polymer Aging: From Beginning to End

Polymers have been widely applied in various fields in the daily routines and the manufacturing. Despite the awareness of the aggressive and inevitable aging for the polymers, it still remains a challenge to choose an appropriate characterization strategy for evaluating the aging behaviors. The difficulties lie in the fact that the polymer features from the different aging stages require different characterization methods. In this review, we present an overview of the characterization strategies preferable for the initial, accelerated, and late stages during polymer aging. The optimum strategies have been discussed to characterize the generation of radicals, variation of functional groups, substantial chain scission, formation of low-molecular products, and deterioration in the polymers' macro-performances. In view of the advantages and the limitations of these characterization techniques, their utilization in a strategic approach is considered. In addition, we highlight the structure-property relationship for the aged polymers and provide available guidance for lifetime prediction. This review could allow the readers to be knowledgeable of the features for the polymers in the different aging stages and provide access to choose the optimum characterization techniques. We believe that this review will attract the communities dedicated to materials science and chemistry.

Fuzzy recognition of LDPE weathering risk based on environmental parameters

The environmental adaptabilities of low-density polyethylene (LDPE) play an important role for high-speed trains’ reliability and comfort. The weathering of LDPE depends on environment factors, while the complexity of the weathering processes inhibits the evaluation of environmental weathering risks. To elucidate the correlation between weathering and environmental factors, and to predict the weathering risk of target areas of interest, three-year-long natural weathering tests were conducted at twelve natural exposure stations in China. Properties of weathered LDPE were compared and analysed using factor analysis. The fuzzy recognition method based on analytic hierarchy process (AHP) was established and used to predict the weathering risk based on environmental database. The results indicate that the factor scores can partitioned the atmospheric environments into five weathering risk grades. This article used the accumulated cumulative temperature of the daily maximum temperature for weathering risk evaluation, which is more scientific than the annual average temperature widely used and is useful for revealing the difference in LDPE weathering in Turpan and Korla. A comparative chart of LDPE’s weathering risk in China was established by this fuzzy recognition method for the first time, which caters to the continuous extension of high-speed railway to new regions.

Plastic Bottle Cap Recycling—Characterization of Recyclate Composition and Opportunities for Design for Circularity

In line with efforts to create a circular economy of plastics, recent EU legislation is strengthening plastic bottle recycling by ambitious separate collection targets and mandatory recycled content obligations. Furthermore, explicit design requirements on the caps of bottles and composite beverage packaging have been introduced. These caps are typically made of polyethylene or polypropylene and often contain additives such as slip agents and anti-statics. Commercially available bottle cap recyclates (BCRs) as well as specifically formulated model compounds were analyzed in terms of composition by means of infrared spectroscopy, differential scanning calorimetry, and high-performance liquid chromatography. Their composition was found to be heterogeneous due to polyolefin cross-contamination, directly reflecting the diversity of cap materials present in the market. Slip agent legacy additives originating from the initial use phase were found and quantified in both commercial and model cap recyclates. This highlights the opportunity for redesigning plastic bottle caps not only in response to regulatory requirements, but to pursue a more comprehensive strategy of product design for circularity. By including considerations of polymer resin and additive choice in cap manufacturing, more homogeneous waste streams could be derived from plastic bottle cap recycling, enabling recycling into more demanding and valuable applications.

Selective determination of poly(styrene) and polyolefin microplastics in sandy beach sediments by gel permeation chromatography coupled with fluorescence detection

Microplastics generated by plastics waste degradation are ubiquitous in marine and freshwater basins, posing serious environmental concerns. Raman and FTIR spectroscopies, along with techniques such as pyrolysis-GC/MS, are typically used for their identification. We present a procedure based on gel permeation chromatography (GPC) coupled with fluorescence detection for semi-quantitative selective determination of the most common microplastics found in marine shoreline sediments: poly(styrene) (PS) and partially degraded polyolefins (LDPEox). By operating the detector at either 260/280 or 370/420 nm excitation/emission wavelengths PS can be distinguished from LDPEox upon GPC separation. Semi-quantitative determination of microplastics contents is also possible: dichloromethane extracts of PS and LDPEox yield linear plots of fluorescence peak area vs concentration (0-5.0 mg/mL range) and were used as reference materials for quantification of the microplastics content in sand samples collected in the winter berm and dune sectors of a Tuscany beach in Italy.

Optical Properties of Saturated and Unsaturated Carbonyl Defects in Polyethylene

Polyethylene (PE), one of the simplest and most used aliphatic polymers, is generally provided with a number of additives, in particular antioxidants, because of its tendency to get oxidized. Carbonyl defects, a product of the oxidation of PE, are occurring in various forms, in particular saturated ones, known as ketones, where a C═O double bond substitutes a CH₂ group, and various unsaturated ones, i.e., with further missing hydrogens. Many experimental investigations of the optical properties in the visible/UV range mainly attribute the photoluminescence of PE to one specific kind of unsaturated carbonyls, following analogies to the emission spectra of similar small molecules. However, the reason why saturated carbonyls should not be optically detected is not clear. We investigated the optical properties of PE with and without carbonyl defects using perturbative GW and the Bethe-Salpeter equation in order to take into account excitonic effects. We discuss the calculated excitonic states in comparison with experimental absorption/emission energies and the stability of both saturated and unsaturated carbonyl defects. We conclude that the unsaturated defects are indeed the best candidate for the luminescence of oxidized PE, and the reason is mainly due to oscillator strengths.