Structure and rheological behavior of polypropylene interphase at high carbon nanotube concentration

Straightforward Strategy Toward In Situ Water-Phase Exfoliation and Improved Interfacial Adhesion to Fabricate High-Performance Polypropylene/Graphene Nanocomposites

Graphene is a potential candidate for achieving high-performance and multifunctional polypropylene (PP) composites. However, the complex manufacturing process and low dispersibility of graphene, as well as poor interfacial adhesion between graphene and polypropylene chains, stifle progress on large-scale production and applications of graphene/polypropylene composites. Here, we develop a strategy of maleic anhydride grafted polypropylene (MAPP) latex-assisted graphene exfoliation and melt blending to address the key challenges facing in industrial production. The surface property of the graphitic precursor is well-designed to achieve a high graphene exfoliation yield of ∼100% and induce abundant hydrogen bonding between the obtained mild-oxidized graphene (MOG) sheets and MAPP chains. Therefore, the MAPP-modified MOG can homogeneously disperse in the PP matrix and exhibits an excellent interfacial compatibility with the polymer. The addition of 5 wt % MOG results in simultaneous increase in the initial decomposition temperature, crystallization temperature, tensile strength, and Young's modulus by 43.2, 11.4 °C, 21.5, and 50.7%, respectively, and the electrical conductivity increases to 0.02 S·m-1. This work illustrates a practical solution to low-cost, eco-friendly, and feasible industrial production of graphene/PP composites through synchronous exfoliation and interfacial modification of graphene.

Innovative route for the preparation of high-performance polyolefin materials based on unique dendrimeric silica particles

An innovative methodology for the preparation of high-performance polyolefin-based materials combining a unique dendrimeric silica carrier, a straightforward in situ supporting procedure and in situ ethylene polymerization technique was developed.

Impacts of Performing Electrolysis During Organocatalyzed Atom Transfer Radical Polymerization

An electrochemical variant of organocatalyzed atom transfer radical polymerization (O-ATRP) is developed and investigated. Inspired by electrochemically mediated atom transfer radical polymerization (eATRP), potentiostatic electrolysis is used to manipulate the catalyst's redox states in O-ATRP to understand whether deactivation in O-ATRP can be enhanced to improve polymerization control. During the course of this work, several possible side reactions are investigated, and the electrochemical apparatus is optimized to reduce side reactions at the counter electrode. This electrochemically modified O-ATRP method (eO-ATRP) is then studied at different applied potentials, under different irradiation conditions, and with two photoredox catalysts to understand the impact of electrolysis on polymerization control. Ultimately, although electrolysis was successfully used to improve polymerization control in O-ATRP, some additional challenges have been identified. Several key questions are postulated to guide future work in this area.

Rheological Behavior of Polymer/Carbon Nanotube Composites: An Overview

This paper reviews the current achievements regarding the rheological behavior of polymer-based nanocomposites containing carbon nanotubes (CNTs). These systems have been the subject of a very large number of scientific investigations in the last decades, due to the outstanding characteristics of CNTs that have allowed the formulation of nanostructured polymer-based materials with superior properties. However, the exploitation of the theoretical nanocomposite properties is strictly dependent on the complete dispersion of CNTs within the host matrix and on the consequent development of a huge interfacial region. In this context, a deep knowledge of the rheological behavior of CNT-containing systems is of fundamental importance, since the evaluation of the material's viscoelastic properties allows the gaining of fundamental information as far as the microstructure of nanofilled polymers is concerned. More specifically, the understanding of the rheological response of polymer/CNT nanocomposites reveals important details about the characteristics of the interface and the extent of interaction between the two components, hence allowing the optimization of the final properties in the resulting nanocomposites. As the literature contains plenty of reviews concerning the rheological behavior of polymer/CNT nanocomposites, this review paper will summarize the most significant thermoplastic matrices in terms of availability and relevant industrial applications.

Synergistic Adsorption for Parabens by an Amphiphilic Functionalized Polypropylene Fiber with Tunable Surface Microenvironment

A series of novel amphiphilic functionalized fibers with polarity tunable surface microenvironment were constructed by introducing hydrophilic polyamines and hydrophobic linear alkyl chain groups, aiming to selectively remove parabens from water. In addition, Fourier-transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy, etc. were employed to determine the successful preparation of amphiphilic functionalized fibers. The adsorption experimental data indicated that the amphiphilic fibers showed excellent selectivity for parabens. In the amphiphilic fibers, hydrogen bonding and hydrophobic interaction existing in one molecular unit can effectively act together to enhance the interaction between substrate and fibers. Kinetic studies illustrated that the adsorption process was a physical adsorption with chemical characteristics. The overall initial adsorption rate together with the stepwise adsorption rate was quantified, and it is inferred that the hydrophobic interaction plays a leading role in the first step of the adsorption process. Moreover, the Freundlich model well described the sorption process with a maximum adsorption of 138.4 mg/g. What's more, the fiber still keeps excellent adsorption capacity (>90%) even after 10 adsorption/desorption cycles, which certifies it is an excellent adsorbent and can be utilized to remove paraben in practice.

Composites with carbon nanotubes and graphene: An outlook

Composite materials with carbon nanotube and graphene additives have long been considered as exciting prospects among nanotechnology applications. However, after nearly two decades of work in the area, questions remain about the practical impact of nanotube and graphene composites. This uncertainty stems from factors that include poor load transfer, interfacial engineering, dispersion, and viscosity-related issues that lead to processing challenges in such nanocomposites. Moreover, there has been little effort to identify selection rules for the use of nanotubes or graphene in composite matrices for specific applications. This review is a critical look at the status of composites for developing high-strength, low-density, high-conductivity materials with nanotubes or graphene. An outlook of the different approaches that can lead to practically useful nanotube and graphene composites is presented, pointing out the challenges and opportunities that exist in the field.