Green and sustainable biocatalytic production of 3,4,5-trihydroxycinnamic acid from palm oil mill effluent

A review on the pollution assessment of hazardous materials and the resultant biorefinery products in Palm oil mill effluent

The voluminous nature of palm oil mill effluent (POME) is directly associated with environmental hazards and could be turned into biorefinery products. The POME, rich in BOD, COD, and oil and grease, with few hazardous materials such as siloxanes, fatty acid methyl ester, and phenolic compounds that may significantly increase the risk of violating the effluent quality standards. Recently, the application of chemical and biological risk assessment that can use electrochemical sensors and microalgae-like species has gained paramount attention towards its remediation. This review describes the existing risk assessment for POME and recommends a novel assessment approach using fish species including invasive ones as suitable for identifying the toxicants. Various physico-chemical and biological treatments such as adsorption, coagulation-flocculation, photo-oxidation, solar-assisted extraction, anaerobic digestion, integrated anaerobic-aerobic, and microalgae cultivation has been investigated. This paper offers an overview of anaerobic technologies, with particular emphasis on advanced bioreactors and their prospects for industrial-level applications. To illustrate, palmitic acid and oleic acid, the precursors of fatty acid methyl ester found in POME pave the way to produce biodiesel with 91.45%. Although there are some challenges in attaining production at an economic scale, this review offers some opportunities that could help in overcoming these challenges.

Enzymes, In Vivo Biocatalysis, and Metabolic Engineering for Enabling a Circular Economy and Sustainability

Since the industrial revolution, the rapid growth and development of global industries have depended largely upon the utilization of coal-derived chemicals, and more recently, the utilization of petroleum-based chemicals. These developments have followed a linear economy model (produce, consume, and dispose). As the world is facing a serious threat from the climate change crisis, a more sustainable solution for manufacturing, i.e., circular economy in which waste from the same or different industries can be used as feedstocks or resources for production offers an attractive industrial/business model. In nature, biological systems, i.e., microorganisms routinely use their enzymes and metabolic pathways to convert organic and inorganic wastes to synthesize biochemicals and energy required for their growth. Therefore, an understanding of how selected enzymes convert biobased feedstocks into special (bio)chemicals serves as an important basis from which to build on for applications in biocatalysis, metabolic engineering, and synthetic biology to enable biobased processes that are greener and cleaner for the environment. This review article highlights the current state of knowledge regarding the enzymatic reactions used in converting biobased wastes (lignocellulosic biomass, sugar, phenolic acid, triglyceride, fatty acid, and glycerol) and greenhouse gases (CO₂ and CH₄) into value-added products and discusses the current progress made in their metabolic engineering. The commercial aspects and life cycle assessment of products from enzymatic and metabolic engineering are also discussed. Continued development in the field of metabolic engineering would offer diversified solutions which are sustainable and renewable for manufacturing valuable chemicals.

Box-Behnken design optimisation of a green novel nanobio-based reagent for rapid visualisation of latent fingerprints on wet, non-porous substrates

OBJECTIVE

Optimisation of the green novel nanobio-based reagent (NBR) for rapid visualisation of groomed fingerprints on wet non-porous substrates using response surface methodology and assessment of its stability and sensitivity were attempted for forensic applications.

RESULTS

Scanning electron microscopy images demonstrated successful attachments of NBR onto the constituents of fingerprints on the substrates. The highest average quality of visualised fingerprints was attained at the optimum condition (100 mg of CRL; 75 mg of acid-functionalised multi-walled carbon nanotubes; 5 h of immobilisation). The NBR produced comparable average quality of fingerprints with the commercially available small particle reagent, even after 4 weeks of storage (without any preservatives) in both chilled and sultry conditions. The NBR was sensitive enough to visualise the increasingly weaker fingerprints, particularly on glass slides.

CONCLUSION

The optimised novel NBR could be the relatively greener option for visualising latent fingerprints on wet, non-porous substrates for forensic applications.

Development of a continuous-flow system with immobilized biocatalysts towards sustainable bioprocessing

Implementing immobilized biocatalysts in continuous-flow systems can enable a sustainable process through enhanced enzyme stability, better transport and process continuity as well as simplified recycle and downstream processing.

Phenolic hydroxylases

Many flavin-dependent phenolic hydroxylases (monooxygenases) have been extensively investigated. Their crystal structures and reaction mechanisms are well understood. These enzymes belong to groups A and D of the flavin-dependent monooxygenases and can be classified as single-component and two-component flavin-dependent monooxygenases. The insertion of molecular oxygen into the substrates catalyzed by these enzymes is beneficial for modifying the biological properties of phenolic compounds and their derivatives. This chapter provides an in-depth discussion of the structural features of single-component and two-component flavin-dependent phenolic hydroxylases. The reaction mechanisms of selected enzymes, including 3-hydroxy-benzoate 4-hydroxylase (PHBH) and 3-hydroxy-benzoate 6-hydroxylase as representatives of single-component enzymes and 3-hydroxyphenylacetate 4-hydroxylase (HPAH) as a representative of two-component enzymes, are discussed in detail. This chapter comprises the following four main parts: general reaction, structures, reaction mechanisms, and enzyme engineering for biocatalytic applications. Enzymes belonging to the same group catalyze similar reactions but have different unique structural features to control their reactivity to substrates and the formation and stabilization of C4a-hydroperoxyflavin. Protein engineering has been employed to improve the ability to use these enzymes to synthesize valuable compounds. A thorough understanding of the structural and mechanistic features controlling enzyme reactivity is useful for enzyme redesign and enzyme engineering for future biocatalytic applications.

Scalable biocatalytic C-H oxyfunctionalization reactions

Catalytic C-H oxyfunctionalization reactions have garnered significant attention in recent years with their ability to streamline synthetic routes toward complex molecules. Consequently, there have been significant strides in the design and development of catalysts that enable diversification through C-H functionalization reactions. Enzymatic C-H oxygenation reactions are often complementary to small molecule based synthetic approaches, providing a powerful tool when deployable on preparative-scale. This review highlights key advances in scalable biocatalytic C-H oxyfunctionalization reactions developed within the past decade.

Creating Flavin Reductase Variants with Thermostable and Solvent-Tolerant Properties by Rational-Design Engineering

We have employed computational approaches-FireProt and FRESCO-to predict thermostable variants of the reductase component (C₁ ) of (4-hydroxyphenyl)acetate 3-hydroxylase. With the additional aid of experimental results, two C₁ variants, A166L and A58P, were identified as thermotolerant enzymes, with thermostability improvements of 2.6-5.6 °C and increased catalytic efficiency of 2- to 3.5-fold. After heat treatment at 45 °C, both of the thermostable C₁ variants remain active and generate reduced flavin mononucleotide (FMNH^- ) for reactions catalyzed by bacterial luciferase and by the monooxygenase C₂ more efficiently than the wild type (WT). In addition to thermotolerance, the A166L and A58P variants also exhibited solvent tolerance. Molecular dynamics (MD) simulations (6 ns) at 300-500 K indicated that mutation of A166 to L and of A58 to P resulted in structural changes with increased stabilization of hydrophobic interactions, and thus in improved thermostability. Our findings demonstrated that improvements in the thermostability of C₁ enzyme can lead to broad-spectrum uses of C₁ as a redox biocatalyst for future industrial applications.

Monooxygenation of aromatic compounds by flavin-dependent monooxygenases

Many flavoenzymes catalyze hydroxylation of aromatic compounds especially phenolic compounds have been isolated and characterized. These enzymes can be classified as either single-component or two-component flavin-dependent hydroxylases (monooxygenases). The hydroxylation reactions catalyzed by the enzymes in this group are useful for modifying the biological properties of phenolic compounds. This review aims to provide an in-depth discussion of the current mechanistic understanding of representative flavin-dependent monooxygenases including 3-hydroxy-benzoate 4-hydroxylase (PHBH, a single-component hydroxylase), 3-hydroxyphenylacetate 4-hydroxylase (HPAH, a two-component hydroxylase), and other monooxygenases which catalyze reactions in addition to hydroxylation, including 2-methyl-3-hydroxypyridine-5-carboxylate oxygenase (MHPCO, a single-component enzyme that catalyzes aromatic-ring cleavage), and HadA monooxygenase (a two-component enzyme that catalyzes additional group elimination reaction). These enzymes have different unique structural features which dictate their reactivity toward various substrates and influence their ability to stabilize flavin intermediates such as C4a-hydroperoxyflavin. Understanding the key catalytic residues and the active site environments important for governing enzyme reactivity will undoubtedly facilitate future work in enzyme engineering or enzyme redesign for the development of biocatalytic methods for the synthesis of valuable compounds.