Fluorescence Resonance Energy Transfer between organic dyes adsorbed onto nano-clay and Langmuir-Blodgett (LB) films

Sensing of Gunshot Residue components from real sample using Fluorescence Resonance Energy Transfer

The present work represents a Fluorescence Resonance Energy Transfer (FRET) based sensing method for detecting Gunshot Residue (GSR) components. Two laser dyes Acf and RhB have been used as donor and acceptor respectively in the FRET pair. The real sample was collected after test firing in a forensic science laboratory. On the other hand, a standard GSR solution has been prepared in the laboratory. For the preparation of standard GSR solutions, we used the water solutions of the salts BaCl2, SbCl3, and Pb(NO3)2. The FRET efficiency was measured between Acf and RhB to sense the presence of GSR components (Pb+2, Ba+2, and Sb+3) in both real sample and standard solution by mixing the salts in aqueous solution. It has been observed that the FRET efficiency systematically decreases in the presence of GSR components. To amplify the FRET efficiency of the dye pair, inorganic clay dispersion (laponite) was used. The enhancement in FRET efficiency represents a better sensitivity of the proposed sensor. The current sensor is useful for the quantification of concentrations of the GSR components in a real sample.

Atomistic View of the Energy Transfer in a Fluorophore-Functionalized Gold Nanocluster

Understanding the dynamics of Förster resonance energy transfer (FRET) in fluorophore-functionalized nanomaterials is critical for developing and utilizing such materials in biomedical imaging and optical sensing applications. However, structural dynamics of noncovalently bound systems have a significant effect on the FRET properties affecting their applications in solutions. Here, we study the dynamics of the FRET in atomistic detail by disclosing the structural dynamics of the noncovalently bound azadioxotriangulenium dye (KU) and atomically precise gold nanocluster (Au₂₅(p-MBA)₁₈, p-MBA = para-mercaptobenzoic acid) with a combination of experimental and computational methods. Two distinct subpopulations involved in the energy transfer process between the KU dye and the Au₂₅(p-MBA)₁₈ nanoclusters were resolved by time-resolved fluorescence experiments. Molecular dynamics simulations revealed that KU is bound to the surface of Au₂₅(p-MBA)₁₈ by interacting with the p-MBA ligands as a monomer and as a π-π stacked dimer where the center-to-center distance of the monomers to Au₂₅(p-MBA)₁₈ is separated by ∼0.2 nm, thus explaining the experimental observations. The ratio of the observed energy transfer rates was in reasonably good agreement with the well-known 1/R⁶ distance dependence for FRET. This work discloses the structural dynamics of the noncovalently bound nanocluster-based system in water solution, providing new insight into the dynamics and energy transfer mechanism of the fluorophore-functionalized gold nanocluster at an atomistic level.

FRET Based Biosensor: Principle Applications Recent Advances and Challenges

Förster resonance energy transfer (FRET)-based biosensors are being fabricated for specific detection of biomolecules or changes in the microenvironment. FRET is a non-radiative transfer of energy from an excited donor fluorophore molecule to a nearby acceptor fluorophore molecule. In a FRET-based biosensor, the donor and acceptor molecules are typically fluorescent proteins or fluorescent nanomaterials such as quantum dots (QDs) or small molecules that are engineered to be in close proximity to each other. When the biomolecule of interest is present, it can cause a change in the distance between the donor and acceptor, leading to a change in the efficiency of FRET and a corresponding change in the fluorescence intensity of the acceptor. This change in fluorescence can be used to detect and quantify the biomolecule of interest. FRET-based biosensors have a wide range of applications, including in the fields of biochemistry, cell biology, and drug discovery. This review article provides a substantial approach on the FRET-based biosensor, principle, applications such as point-of-need diagnosis, wearable, single molecular FRET (smFRET), hard water, ions, pH, tissue-based sensors, immunosensors, and aptasensor. Recent advances such as artificial intelligence (AI) and Internet of Things (IoT) are used for this type of sensor and challenges.

Unmodified Clay Nanosheets at the Air-Water Interface

Quasi-two-dimensional (2D) nanolayers, such as graphene oxide or clay layers, adhere to gas-liquid or liquid-liquid interfaces. Particularly, clays are of wide general interest in this context because of their extensive and crucial use as Pickering emulsion stabilizers, as well as for their ability to provide colloidosome capsules. So far, clays could only be localized at oil-water or air-saline-water interfaces in aggregated states, while our results now show that clay nanosheets without any modification can be located at air-deionized-water interfaces. The clay mineral used in the present work is synthetic fluorohectorite with a very high aspect ratio and superior quality in homogeneity and charge distribution compared to other clay minerals. This clay mineral is more suitable for achieving unmodified clay anchoring to fluid interfaces compared to other clay minerals used in previous works. In this context, we studied clay nanosheet organization at the air-water interface by combining different experimental methods: Langmuir-Blodgett trough studies, scanning electron microscopy (SEM) studies of film deposits, grazing-incidence X-ray off-specular scattering (GIXOS), and Brewster angle microscopy (BAM). Clay films formed at the air-water interface could be transferred to solid substrates by the Langmuir-Schaefer method. The BAM results indicate a dynamic equilibrium between clay sheets on the interface and in the subphase. Because of this dynamic equilibrium, the Langmuir monolayer surface pressure does not change significantly when pure clay sheets are spread on the liquid surface. However, also, GIXOS results confirm that there are clay nanosheets at the air-water interface. In addition, we find that clay sheets modified by a branched polymer are much more likely to be confined to the interface.

Harvesting light energy by iridium(iii) complexes on a clay surface

The photon energy adsorbed by a donor molecule migrates among other donor molecules until it is captured by an acceptor.

Extending the range of FRET--the Monte Carlo study of the antenna effect

The problem of extending the utilizable range of Förster resonance energy transfer (FRET) is of great current interest, due to the demand of conformation studies of larger biological structures at distances exceeding typical limiting distance of 100 Å. One of the ways to address this issue is the use of so-called antenna effect. In the present work, the influence of the antenna effect on the FRET efficiency is investigated by the Monte Carlo analysis. The previously published results Bojarski et al. (J Phys Chem B 115:10120–10125, 2011) indicate that using a simple model of donor linked with a protein labeled with multiple acceptors, significantly increases the transfer efficiency in comparison with donor–single acceptor system. The effect is stronger if the transition moments of acceptors are mutually parallel. In this work, to extend the scope of possible biological systems to be analyzed, different distributions of donor–acceptors distance are analyzed, as well as the size and shape of the attached molecule.

Size-matching effect on inorganic nanosheets: control of distance, alignment, and orientation of molecular adsorption as a bottom-up methodology for nanomaterials

We have been investigating complexes composed of nanolayered materials with anionic charges such as clay nanosheets and dye molecules such as cationic porphyrins. It was found that the structure of dye assembly on the layered materials can be effectively controlled by the use of electrostatic host-guest interaction. The intermolecular distance, the molecular orientation angle, the segregation/integration behavior, and the immobilization strength of the dyes can be controlled in the clay-dye complexes. The mechanism to control these structural factors has been discussed and was established as a size-matching effect. Unique photochemical reactions such as energy transfer through the use of this methodology have been examined. Almost 100% efficiency of the energy-transfer reaction was achieved in the clay-porphyrin complexes as a typical example for an artificial light-harvesting system. Control of the molecular orientation angle is found to be useful in regulating the energy-transfer efficiency and in preparing photofunctional materials exhibiting solvatochromic behavior. Through our study, clay minerals turned out to serve as protein-like media to control the molecular position, modify the properties of the molecule, and provide a unique environment for chemical reactions.

Development of a DNA sensor using a molecular logic gate

This communication reports the increase in fluorescence resonance energy transfer (FRET) efficiency between two laser dyes in the presence of deoxyribonucleic acid (DNA). Two types of molecular logic gates have been designed where DNA acts as input signal and fluorescence intensity of different bands are taken as output signal. Use of these logic gates as a DNA sensor has been demonstrated.