Surface hydrogen bond network spatially confined BiOCl oxygen vacancy for photocatalysis

Phosphate modified nanoarchitectonics for promoted photocatalytic singlet oxygen generation and carbamazepine degradation of (010) facet-exposed BiOCl

1O2 generation over (001) or (010) facet exposed BiOCl (B001 or B010) with/without phosphate modification were studied from the aspects of excitons involved energy transfer route, the O2- oxidation based charge transfer route and the H2O2 oxidation by HClO. Phosphate modification not only enhance charge separation thus result in H2O2 oxidation by HClO to release 1O2 but also weaken excitonic effect in the confined layer of BiOCl accordingly affect 1O2 generation via energy transfer. Considering [001] orientation favors the formation of excitons than that of [010] direction over BiOCl, excitons loss was hardly compensated by the H2O2 oxidation by HClO for 1O2 generation over phosphate modified B001. Nevertheless, limited excitonic effect makes the O2- oxidation by h+ via charge transfer as dominant route for 1O2 yielding over B010, the extra H2O2 oxidation with HClO after phosphate modification significantly enhance 1O2 generation over B010 followed with 2.2 times higher carbamazepine photodegradation activity. The initial attack of CC bond via 1O2 to form epoxide played important roles on carbamazepine degradation. This study demonstrated that the facet-specific phosphate modification of photocatalysts can finely tune reactive 1O2 species for superior pharmaceuticals degradations.

High-Entropy Perovskite Oxides as a Family of Electrocatalysts for Efficient and Selective Nitrogen Oxidation

Electrocatalytic nitrogen oxidation reaction (NOR) can convert nitrogen (N2) into nitrate (NO3-) under ambient conditions, providing an attractive approach for synthesis of NO3-, alternative to the current approach involving the harsh Haber-Bosch and Ostwald oxidation processes that necessitate high temperature, high pressure, and substantial carbon emission. Developing efficient NOR catalysts is a prerequisite, which remains a formidable challenge, owing to the weak activation/dissociation of N2. A variety of NOR electrocatalysts have been developed, but their NOR kinetics are still extremely sluggish, resulting in inferior Faradaic Efficiencies. Here, we report a high-entropy Ru-based perovskite oxide (denoted as Ru-HEP) that can function as a high-performance NOR catalyst and exhibit a high NO3- yield rate of 39.0 μmol mg-1 h-1 with a Faradaic Efficiency of 32.8%. Both our experimental results and theoretical calculations suggest that the high-entropy configuration of Ru-HEP perovskite oxide can markedly enhance the oxygen-vacancy concentration, where the Ru sites and their neighboring oxygen vacancies can serve as unsaturated centers and decrease the overall energy barrier for N2 electrooxidation, thereby leading to promoted NOR kinetics. This work presents an alternative avenue for promoting NOR catalysis on perovskite oxides through the high-entropy engineering strategy.

Asymmetric Electron Redistribution in Niobic-Oxygen Vacancy Associates to Tune Noncovalent Interaction in CO2 Photoreduction

The role of vacancy associates in photocatalytic CO2 reduction is an open question. Herein, the Nb─O vacancy associates (VNb─O) are engineered into niobic acid (NA) atomic layers to tailor the CO2 photoreduction performance. The intrinsic charge compensation from O to Nb around Nb─O vacancy associates can manipulate the active electronic states, leading to the asymmetric electron redistribution. These local symmetry breaking sites show a charge density gradient, forming a localized polarization field to polarize nonpolar CO2 molecules and tune the noncovalent interaction of reaction intermediates. This unique configuration contributes to the 9.3 times increased activity for photocatalytic CO2 reduction. Meantime, this VNb─O NA also shows excellent photocatalytic activity for NO3 --NH4 + synthesis, with NH4 + formation rate up to 3442 µmol g-1 h-1. This work supplies fresh insights into the vacancy associate design for electron redistribution and noncovalent interaction tuning in photocatalysis.

Surface and interface engineering of BiOCl nanomaterials and their photocatalytic applications

BiOCl materials have received much attention because of their unique optical and electrical properties. Still, their unsatisfactory catalytic performance has been troubling researchers, limiting the application of BiOCl-based photocatalysts. Therefore, many researchers have studied the adjustment of BiOCl-based materials to enhance photocatalytic efficiency. This review focuses on surface and interface engineering strategies for boosting the photocatalytic performance of BiOCl-based nanomaterials, including forming oxygen vacancy defects, constructing metal/BiOCl, and the fabrication of semiconductor/BiOCl nanocomposites. The photocatalytic applications of the above composites are also concluded in photodegradation of aqueous pollutants, photocatalytic NO removal, photo-induced H2 production, and CO2 reduction. Special emphasis has been given to the modification methods of BiOCl and photocatalytic mechanisms to provide a more detailed understanding for researchers in the fields of energy conversion and materials sciences.

Surface Hydrogen Bond-Induced Oxygen Vacancies of TiO2 for Two-Electron Molecular Oxygen Activation and Efficient NO Oxidation

Defect engineering can provide a feasible approach to achieving ambient molecular oxygen activation. However, conventional surface defects (e.g., oxygen vacancies, OVs), featured with the coordinatively unsaturated metal sites, often favor the reduction of O2 to •O2- rather than O22- via two-electron transfer, hindering the efficient pollutant removal with high electron utilization. Herein, we demonstrate that this bottleneck can be well discharged by modulating the electronic structure of OVs via phosphorization. As a proof of concept, TiO2 nanoparticles are adopted as a model material for NaH2PO2 (HP) modification, in which HP induces the formation of OVs via weakening the Ti-O bonds through the hydrogen bond interactions. Additionally, the formed Ti-O-P covalent bond refines the electronic structure of OVs, which enables rapid electron transfer for two-electron molecular oxygen activation. As exemplified by NO oxidation, HP-modified TiO2 with abundant OVs achieved complete NO removal with high selectivity for benign nitrate, superior to that of pristine TiO2. This study highlights a promising approach to regulate the O2 activation via an electronic structure modulation and provides fresh insights into the rational design of a photocatalyst for environmental remediation.

Bi/Mn-Doped BiOCl Nanosheets Self-Assembled Microspheres toward Optimized Photocatalytic Performance

Doping engineering of metallic elements is of significant importance in photocatalysis, especially in the transition element range where metals possess empty 'd' orbitals that readily absorb electrons and increase carrier concentration. The doping of Mn ions produces dipole interactions that change the local structure of BiOCl, thus increasing the specific surface area of BiOCl and the number of mesoporous distributions, and providing a broader platform and richer surface active sites for catalytic reactions. The combination of Mn doping and metal Bi reduces the forbidden bandwidth of BiOCl, thereby increasing the absorption in the light region and strengthening the photocatalytic ability of BiOCl. The degradation of norfloxacin by Bi/Mn-doped BiOCl can reach 86.5% within 10 min. The synergistic effect of Mn doping and Bi metal can change the internal energy level and increase light absorption simultaneously. The photocatalytic system created by such a dual-technology combination has promising applications in environmental remediation.

In Situ Monitoring of the Spatial Distribution of Oxygen Vacancies and Enhanced Photocatalytic Performance at the Single-Particle Level

Oxygen vacancies (OVs) on specific sites/facets can strengthen the interaction between reactants and oxide surfaces, facilitating interfacial charge transfer. However, precise monitoring of the spatial distribution of OVs remains a grand challenge. We report here that a single-particle spectroscopy technique addresses this challenge by establishing a positive correlation relationship between defects and bound exciton luminescence across different facets. Taking monoclinic BiVO₄ as an example, on the basis of theoretical guidance, by in situ tracking the PL lifetimes and PL spectra of different facets on single particles before and after hydrogen treatment, we provide evidence that the PL emission originates from the OV state and determine that OVs is more inclined to be generated at the {010} facets. This anisotropic defect engineering significantly prolongs the lifetime of carriers and accelerates the activation of molecular oxygen. These findings not only verify preference rules of OVs in metal oxides but also provide a time-space-resolved monitoring method.

Improving the Surface Oxygen Vacancy Concentration of Bi2O4 through the Pretreatment of the NaBiO3·2H2O Precursor as a High-Performance Visible Light Photocatalyst

The oxygen-deficient bismuth oxide, Bi₂O₄, synthesized by a typical hydrothermal method using commercial NaBiO₃·2H₂O as a raw material only has a relatively low concentration of surface oxygen vacancies (OVs). How to improve the visible light photocatalytic performance of Bi₂O₄ via tuning its surface OV concentration is still a huge challenge. In this study, improving the surface OVs of Bi₂O₄ was successfully realized through the pretreatment of commercial NaBiO₃·2H₂O, including thermal treatment in air and hydrothermal treatment in 10 M NaOH solution, forming NaBiO₃·xH₂O intermediate products first, and then hydrothermal preparation of Bi₂O₄ target products using NaBiO₃·xH₂O instead of commercial NaBiO₃·2H₂O as the precursor. The enhanced surface OV content not only narrows the band gap of Bi₂O₄ and thus extends its optical response range but also captures more photoexcited electrons and thus increases the charge carriers' separation efficiency and prolongs the charge carriers' lifetime of Bi₂O₄. Among the above-mentioned two pretreatment methods, the effects of the hydrothermal pretreatment are superior to those of the thermal treatment, involving the increase of surface OVs, the optical harvesting capacity, and the charge carriers' separation efficiency. Accordingly, Bi₂O₄ prepared by the hydrothermal pretreatment route exhibits the optimal visible light catalytic performance toward the removal of methyl orange (MO) and phenol due to its most abundant surface OV concentration, which is 2.59 times and 4.26 times higher than that of Bi₂O₄ synthesized directly by the commercial NaBiO₃·2H₂O route, respectively. Holes (h⁺) and superoxide radicals (^•O₂^-) are identified as the main active species, while singlet oxygen (¹O₂) and hydroxyl radicals (^•OH) are verified as the second and third important active species for organic pollutant removal, respectively. This work has developed a novel strategy to promote the catalytic performance of single Bi₂O₄ induced by the enhanced surface OV concentration through the pretreatment of the precursor, commercial NaBiO₃·2H₂O.

Self-Accelerating Interfacial Catalytic Elimination of Gaseous Sulfur-Containing Volatile Organic Compounds as Microbubbles in a Facet-Engineered Three-Dimensional BiOCl Sponge Fenton-Like Process

The elimination of gaseous sulfur-containing volatile organic compounds (S-VOCs) by a microbubble-assisted Fenton-like process is an innovative strategy. Herein, we established a microbubble-assisted Fenton-like process to eliminate malodorous microbubble CH₃SH as representative gaseous S-VOCs, in which BiOCl nanosheets loaded on a three-dimensional sponge were exposed to (001) or (010) facets and induced Fenton-like interface reactions. Intriguingly, the microbubble-assisted Fenton-like process significantly removed 99.9% of CH₃SH, higher than that of the macrobubble-assisted Fenton-like process (39.0%). The self-accelerating interfacial catalytic mechanism was in-depth identified by in situ ATR-FTIR, PTR-TOF-MS, EPR, and DFT computational study. The extraordinary elimination performance of microbubble-assisted Fenton-like process lies in the enhancing dissolution/mass transfer of gaseous CH₃SH in the gas/liquid phase and the tight contact between CH₃SH-microbubbles and 3D-BiOCl sponge due to the low rising velocity (0.13 mm s^-1) and negative charge (-45.53 mV) of CH₃SH-microbubbles, as well as the effective generation of ¹O₂ by activating the enriched dissolved oxygen in CH₃SH-microbubble via effective electron-polarized sites on 3D-BiOCl sponge. Furthermore, CH₃SH-microbubbles transferred electrons to H₂O₂ through electron-rich oxygen vacancy centers of the 3D-BiOCl sponge to generate more •OH, thus achieving excellent elimination performance. Overall, this study demonstrates the enhanced self-accelerating interfacial catalytic elimination by S-VOC microbubble and provides the underlying mechanisms.

Construction of Hexagonal Prism-like Defective BiOCL Hierarchitecture for Photocatalytic Degradation of Tetracycline Hydrochloride

Oxygen vacancy manipulation and hierarchical morphology construction in oxygen-containing semiconductors have been demonstrated to be effective strategies for developing high efficiency photocatalysts. In most studies of bismuth-based photocatalysts, hierarchical morphology and crystal defects are achieved separately, so the catalysts are not able to benefit from both features. Herein, using boiling ethylene glycol as the treatment solution, we developed an etching-recrystallization method for the fabrication of 3D hierarchical defective BiOCl at ambient pressure. The target hierarchical 3D-BiOCl is composed of self-assembled BiOCl nanosheets, which exhibit a hexagonal prism-like morphology on a micron scale, while simultaneously containing numerous oxygen vacancies within the crystal structure. Consequently, the target catalyst was endowed with a higher specific surface area, greater light harvesting capability, as well as more efficient separation and transfer of photo-excited charges than pristine BiOCl. As a result, 3D-BiOCl presented an impressive photocatalytic activity for the degradation of tetracycline hydrochloride in both visible light and natural white light emitting diode (LED) irradiation. Moreover, an extraordinary recycling property was demonstrated for the target photocatalyst thanks to its hierarchical structure. This study outlines a simple and energy-efficient approach for producing high-performance hierarchically defective BiOCl, which may also open up new possibilities for the morphological and crystal structural defect regulation of other Bi-based photocatalysts.

Immobilization of bismuth oxychloride on cellulose nanocrystal for sunlight-driven superior photosensitized degradation

Semiconductor photocatalysis is considered to be an important green technology for sewage treatment. However, most of the pollutant degradation studies used simulated sunlight in a laboratory, which has great energy cost with limited applications in industry. Herein, cellulose nanocrystal (CNC) with rich hydroxyl groups and high specific surface area are used as the matrix to construct composites with BiOCl, which improves the dispersibility with an increased number of oxygen vacancies on BiOCl. The obtained composite photocatalyst, i.e., BiOCl/CNC, showed an excellent performance with good recyclability. Within 30 min, 99% of RhB (20 mg/L) was degraded under simulated visible light and 94% under natural sunlight. The reaction system maintains excellent catalytic performance after being scaled up by 10×. Compared with reported BiOCl-based composites in literature, BiOCl/CNC had excellent photocatalytic activity for the RhB degradation with good recyclability. Subsequently, by identifying the active species, a reasonable photocatalytic mechanism was proposed for RhB degradation. This work developed an economical and effective visible light sensitive photocatalyst for the treatment of organic dyes in water.

Designed polymeric conjugation motivates tunable activation of molecular oxygen in heterogeneous organic photosynthesis

Photocatalytic oxidative organic reactions are important synthetic transformations, and research on reaction selectivity by reactive oxygen species (ROS) is significant. To date, however, there has rarely been any focus on the directed generation of ROSs. Herein, we report the first identification of tunable molecular oxygen activation induced by polymeric conjugation in nonmetallic conjugated microporous polymers (CMP). The conjugation between these can be achieved by the introduction of alkynyl groups. CMP-A with an alkynyl bridge facilitates the intramolecular charge mobility while CMP-D, lacking an alkynyl group enhances the photoexcited carrier build-up on the surface from diffusion. These different processes dominate the directed ROS generation of the superoxide radical (O₂^-) and singlet oxygen (¹O₂), respectively. This theory is substantiated by the different performances of these CMPs in the aerobic oxidation of sulfides and the dehydrogenative coupling of amines, and could provide insight into the rational design of CMPs for various heterogeneous organic photosynthesis.

Oxygen vacancies mediated Bi12O17Cl2 ultrathin nanobelts: Boosting molecular oxygen activation for efficient organic pollutants degradation

Photocatalysis technology has been considered as a sustainable and promising strategy for pollutant degradation. However, the photocatalytic activity is limited by the unsatisfactory carrier separation efficiency of photocatalysts and insufficient reactive oxygen species. Herein, the oxygen vacancies (OVs) mediated Bi₁₂O₁₇Cl₂ ultra-thin nanobelt (ROV Bi₁₂O₁₇Cl₂) was fabricated via solvothermal method. The surface oxygen vacancies can act as the 'electron sink' and boost charge separation. Thus, the ROV Bi₁₂O₁₇Cl₂ shows superior photocatalytic performance, which is 2.72 and 4.52 times compared to deficient oxygen vacancies Bi₁₂O₁₇Cl₂ (DOV Bi₁₂O₁₇Cl₂) and Bulk Bi₁₂O₁₇Cl₂ for colored organic pollutants degradation, respectively. Besides, the ROV Bi₁₂O₁₇Cl₂ also displays excellent removal efficiency for refractory antibiotics, roughly 4.00 and 7.45 times compared to that of DOV Bi₁₂O₁₇Cl₂ and Bulk Bi₁₂O₁₇Cl₂, respectively. Furthermore, the intermediates for photocatalytic degradation were determined through HPLC-MS and the possible degradation paths of the target molecules were inferred. Capture experiment and ESR spectra confirmed that the ^•O₂^- played a vital role for the organic pollutant degradation. This work provides a new perspective for the design of advanced semiconductors for organic pollutants degradation.

Synergetic modulation of surface alkali and oxygen vacancy over SrTiO3for the CO2photodissociation

Photochemical conversion of CO₂into solar fuels is one of the promising strategies to reducing the CO₂emission and developing a sustainable carbon economy. For the more efficient utilization of solar spectrum, several approaches were adopted to pursue the visible-light-driven SrTiO₃. Herein, oxygen vacancy was introduced over the commercial SrTiO₃(SrTiO_3-x) via the NaBH₄thermal treatment, to extend the light absorption and promote the CO₂adsorption over SrTiO₃. Due to the mid-gap states resulted from the oxygen deficiency, combined with the intrinsic energy level of SrTiO₃, the SrTiO_3-xcatalyst exhibited excellent CO productivity (4.1 μmolˑg^-1ˑh^-1) and stability from the CO₂photodissociation under the visible-light irradiation (λ > 400 nm). Then, surface alkalization over SrTiO_3-x(OH-SrTiO_3-x) was carried out to further enhance the CO₂adsorption/activation over the surface base sites and provide the OH ions as hole acceptor, the surface alkali OH connected with Sr site of SrTiO₃could also weaken the Sr-O bonding thus facilitate the regeneration of surface oxygen vacancy under the light illumination, thus resulting in 1.5 times higher CO productivity additionally. This study demonstrates that the synergetic modulation of alkali OH and oxygen vacancy over SrTiO₃could largely promote the CO₂photodissociation activity.

Simultaneous Manipulation of Bulk Excitons and Surface Defects for Ultrastable and Highly Selective CO2 Photoreduction

The objective of photocatalytic CO₂ reduction (PCR) is to achieve high selectivity for a single energy-bearing product with high efficiency and stability. The bulk configuration usually determines charge carrier kinetics, whereas surface atomic arrangement defines the PCR thermodynamic pathway. Concurrent engineering of bulk and surface structures is therefore crucial for achieving the goal of PCR. Herein, an ultrastable and highly selective PCR using homogeneously doped BiOCl nanosheets synthesized via an inventive molten strategy is presented. With B₂ O₃ as both the molten salt and doping precursor, this new doping approach ensures boron (B) doping from the surface into the bulk with dual functionalities. Bulk B doping mitigates strong excitonic effects confined in 2D BiOCl by significantly reducing exciton binding energies, whereas surface-doped B atoms reconstruct the BiOCl surface by extracting lattice hydroxyl groups, resulting in intimate B-oxygen vacancy (B-OV) associates. These exclusive B-OV associates enable spontaneous CO₂ activation, suppress competitive hydrogen evolution and promote the proton-coupled electron transfer step by stabilizing *COOH for selective CO generation. As a result, the homogeneous B-doped BiOCl nanosheets exhibit 98% selectivity for CO₂ -to-CO reduction under visible light, with an impressive rate of 83.64 µmol g^-1 h^-1 and ultrastability for long-term testing of 120 h.

Sulfur-Doped BiOCl with Enhanced Light Absorption and Photocatalytic Water Oxidation Activity

Photocatalysis is a powerful strategy to address energy and environmental concerns. Sulfur-doped BiOCl was prepared through a facial hydrothermal method to improve the photocatalytic performance. Experimental results and theoretical calculations demonstrated that the band structure of the sulfur-doped BiOCl was optimally regulated and the light absorption range was expanded. It showed excellent visible-light photocatalytic water oxidation properties with a rate of 141.7 μmol h-1 g-1 (almost 44 times of that of the commercial BiOCl) with Pt as co-catalyst.

Controllable sulphur vacancies confined in nanoporous ZnS nanoplates for visible-light photocatalytic hydrogen evolution

Controllable sulphur vacancies (S_v) confined in nanoporous ZnS nanoplates (S_v-ZnS) were prepared successfully via rapid heat treatment of ZnS(en)_0.5 nanoplates. S_v with controllable concentrations originating from the in situ doping of N atoms endowed S_v-ZnS with a visible-light photocatalytic H₂ production activity, having a positive linear correlation with S_v concentration.

Surface structure-dependent photocatalytic O2 activation for pollutant removal with bismuth oxyhalides

The purification of water and air by semiconductor photocatalysis is a rapidly growing area for academic research and industrial innovation, featured with ambient removal of organic or inorganic pollutants by using solar light as the energy source and atmospheric O₂ as the green oxidant. Both charge transfer and energy transfer from excited photocatalysts can overcome the spin-forbidden nature of O₂. Layered bismuth oxyhalides are a new group of two-dimensional photocatalysts with an appealing geometric and surface structure that allows the dynamic and selective tuning of O₂ activation at the surface molecular level. In this Feature Article, we specifically summarize our recent progress in selective O₂ activation by engineering surface structures of bismuth oxyhalides. Then, we demonstrate selective photocatalytic O₂ activation of bismuth oxyhalides for environmental control, including water decontamination, volatile organic compound oxidation and nitrogen oxide removal, as well as selective catalytic oxidations. Challenges and opportunities regarding the design of photocatalysts with satisfactory performance for potential environmental control applications are also presented.