Polycyclic aromatic hydrocarbons (PAHs) in sediments from lake Lille Lungegårdsvannet in Bergen, western Norway; appraising pollution sources from the urban history

Chronological evaluation of polycyclic aromatic hydrocarbons in sediments of tangxun lake in central China and impacts of human activities

This study sheds light on the contamination of polycyclic aromatic hydrocarbons (PAHs) in Tangxun Lake sediments, an urban lake reflecting environmental changes in Central China. By analyzing sediment cores from both the inner and outer areas of the lake, we determined the historical trends and sources of PAHs over the past century. The results reveal a significant increase in PAHs concentrations, particularly since the 1980s, coinciding with China's rapid urbanization and industrialization. Using diagnostic ratios and Absolute principal component score-multivariate linear regression (APCS-MLR) methods, we identified petroleum combustion, coal combustion, and biomass combustion as the primary sources of PAHs in the lake sediments. The spatial analysis indicates higher PAHs levels in the inner lake, likely due to its closer proximity to industrial activities. Moreover, by comparing PAH trends in Tangxun Lake with those in other urban, suburban, and remote lakes across China, based on data from 49 sedimentary cores, we highlight the impact of regional socio-economic dynamics on PAH deposition. These insights are crucial for developing effective pollution mitigation strategies and promoting sustainable development in rapidly urbanizing regions.

Seasonal variation and concentration of PAHs in Lake Balaton sediment: A study on molecular weight distribution and sources of pollution

The temporal and spatial variations of 16 Polycyclic Aromatic Hydrocarbons (PAHs) were examined at multiple sites around Lake Balaton from February 2023 to January 2024. The results indicated that the concentrations of PAHs in sediment were high during the winter months, 448.35 to 619.77 ng/g dry weight, and low during the summer months, 257.21 to 465.49 ng/g dry weight. The concentration of high molecular weight PAHs (HMWPAHs), consisting of 5-6 rings, was greater than that of low molecular weight PAHs (LMWPAHs), which had 2-3 rings. The total incremental lifetime cancer risk (ILCR) for both dermal and ingestion pathways was high for both adults and children during the four seasons, with the highest records as the following: winter > spring > summer > autumn. The ecological effects of the 16 PAHs were negligible except for acenaphthylene (Acy) and fluorene (Fl), which displayed slightly higher concentrations during the autumn and spring, respectively.

Temporal and spatial distribution of polycyclic aromatic hydrocarbons (PAHs) in the Danube River in Hungary

The Danube is a significant transboundary river on a global scale, with several tributaries. The effluents from industrial operations and wastewater treatment plants have an impact on the river's aquatic ecosystem. These discharges provide a significant threat to aquatic life by deteriorating the quality of water and sediment. Hence, a total of 16 Polycyclic Aromatic Hydrocarbons (PAHs) compounds were analyzed at six locations along the river, covering a period of 12 months. The objective was to explore the temporal and spatial fluctuations of these chemicals in both water and sediment. The study revealed a significant fluctuation in the concentration of PAHs in water throughout the year, with levels ranging from 224.8 ng/L during the summer to 365.8 ng/L during the winter. Similarly, the concentration of PAHs in sediment samples varied from 316.7 ng/g in dry weight during the summer to 422.9 ng/g in dry weight during the winter. According to the Europe Drinking Water Directive, the levels of PAHs exceeded the permitted limit of 100 ng/L, resulting in a 124.8% rise in summer and a 265.8% increase in winter. The results suggest that the potential human-caused sources of PAHs were mostly derived from pyrolytic and pyrogenic processes, with pyrogenic sources being more dominant. Assessment of sediment quality standards (SQGs) showed that the levels of PAHs in sediments were below the Effect Range Low (ERL), except for acenaphthylene (Acy) and fluorene (Fl) concentrations. This suggests that there could be occasional biological consequences. The cumulative Individual Lifetime Cancer Risk (ILCR) exceeds 1/104 for both adults and children in all sites.

Source identification and ecological risks of parent and substituted polycyclic aromatic hydrocarbons in river surface sediment-pore water systems: Effects of multiple factors

Substituted polycyclic aromatic hydrocarbons (SPAHs) have shown higher health and ecological risks than the corresponding parent PAHs (PPAHs) from laboratory studies, their variations in freshwater system, especially in surface sediment and pore water, remain inadequate understanding. In this study, we revealed the coexistence, ecological risk, and multiple factors affecting variations and sources of PPAHs and SPAHs (nitrated PAHs (NPAHs), oxygenated PAHs (OPAHs)) in the surface sediment-pore water system from a typical urban river in Northern China. The concentration ranges of Σ₂₆PPAHs, Σ₁₀NPAHs, and Σ₄OPAHs in the surface sediments were 153.0-5367.4, not detected (N.D.)-105.4, and 42.2-1177.0 ng·g^-1 dry weight, and fell within 0.6-38.8, N.D.-297.9, and N.D.-212.6 ng·mL^-1 in the pore waters. The t-distributed stochastic neighbor embedding (SNE) coupled with the partitioning around medoids (PAM) elucidated spatiotemporal the variations in PAHs, emphasizing the impacts of industrial activities and sewage discharges. Besides the geochemical and hydrochemical conditions, SPAHs were affected by the potential secondary formation, especially during the wet season. The method comparisons indicated the advantages of principal component analysis-multivariate linear regression (PCA-MLR) and n-alkanes model on source identification. PAHs mainly originated from fossil fuel combustion and vehicular exhaust. The top risk quotient (RQ) values for PAHs occurred in the urban and industrial sections. A majority of the surface sediment samples emerged with low to moderate exposure risks, while all the pore water samples showed high exposure risks. The RQs of OPAHs were significantly higher (p < 0.01) than those of PPAHs. The results suggested the secondary formation of SPAHs as an important role in ecological risks of PAHs in the urban river system.

Bioaccessible PAH influence on distribution of antibiotic resistance genes and soil toxicity of different types of land use

For a better understanding of the dissemination of antibiotic resistance genes (ARGs) in natural microbial communities, it is necessary to study the factors influencing it. There are not enough studies showing the connection of some pollutants with the dissemination of ARGs and especially few works on the effect of polycyclic aromatic compounds (PAHs) on the spread of resistance in microbiocenosis. In this respect, the aim of the study was to determine the effect of bioaccessible PAHs on soil resistome. The toxicity and the content of bioaccessible PAHs and ARGs were studied in 64 samples of soils of different types of land use in the Rostov Region of Russia. In most soils, a close positive correlation was demonstrated between different ARGs and bioaccessible PAHs with different content of rings in the structure. Six of the seven studied ARGs correlated with the content of 2-, 3-, 4-, 5- or 6-ring PAHs. The greatest number of close correlations was found between the content of PAHs and ARGs in the soils of protected areas, for agricultural purposes, and in soils of hospitals. The diverse composition of microbial communities in these soils might greatly facilitate this process. A close correlation between various toxic effects identified with a battery of whole-cell bacterial biosensors and bioaccessible PAHs of various compositions was established. This correlation showed possible mechanisms of PAHs' influence on microorganisms (DNA damage, oxidative stress, etc.), which led to a significant increase in horizontal gene transfer and spread of some ARGs in soil microbial communities. All this information, taken together, suggests that bioaccessible PAHs can enhance the spread of antibiotic resistance genes.

Substantial Decrease in Contaminant Concentrations in the Sediments of the Venice (Italy) Canal Network in the Last Two Decades—Implications for Sediment Management

The Venice canal network requires periodic intervention to remove sediments that progressively accumulate. The most recent dredging operation was carried out in the second half of the 1990s and early 2000s. These sediments had accumulated over a period of more than 30 years and were highly contaminated with Cd, Cu, Hg, Pb, Zn and PAHs. Sediments deposited after the dredging work were investigated in 2005, 2009, 2014 and 2017 by analysing sediment cores collected from three sites in the canal network. Arsenic, heavy metal and PAH concentrations were observed to be much lower than past values, although Cu, Hg and PAH levels were still relatively high. The high Cu concentrations (mean 161 mg kg−1) are partly due to the widespread use of Cu-based antifouling paint. Current Italian regulations forbid the disposal of dredged sediments with these concentrations inside the lagoon, thereby increasing the cost of canal network maintenance.

Background concentrations of polycyclic aromatic hydrocarbons (PAHs) in deep core sediments from the Norwegian Sea and the Barents Sea: A proposed update of the OSPAR Commission background values for these sea areas

Geochemical studies of 174 sediment cores collected by the MAREANO mapping program in Norwegian waters of the North Atlantic Ocean give new sets of values of background concentrations (BCs) for polycyclic aromatic hydrocarbons (PAHs) for the studied regions. The study is based on deep core sediment samples representing background levels of PAHs. The samples selected were only from the deeper parts of undisturbed sediment cores with low, stable concentrations of petrogenic and pyrogenic PAHs, with low variation for individual PAH compounds between the samples within the same core, and from below the parts of the cores dated with ²¹⁰Pb to approximately the last 100-150 years. The results show that the main part of the studied area has BCs different from those previously established by OSPAR Commission (OSPAR) for the North-East Atlantic. Another area in central Barents Sea has a separate set of BCs of pyrogenic PAHs, apparently due to the influence from marginal ice zone mechanisms. A third area with its own set of BCs has been established for north-western Barents Sea off the coast of Svalbard, due to high natural contents of PAHs in this area. BCs for several PAHs not included in the present OSPAR list are also provided.

Historical Pollution and Source Contributions of PAHs in Sediment Cores from the Middle Reach of Huai River, China

To investigate the spatial and historical distributions, and source contributions of polycyclic aromatic hydrocarbon (PAHs) from the middle reach of Huai River, 15 surface sediments and two sediment cores were analyzed. The Σ₁₆ PAHs levels in surface sediments varied from 533.15 to 1422.83 ng/g dw, and from 413.27 to 43951.56 ng/g dw in individual sediment layer of sediment cores. The temporal trends of PAHs in sediment cores are the good indicators of the anthropogenic emissions over the last 60 years. The stable carbon isotope ratios of PAHs indicate the primary PAHs sources were the combustion of wood and coal during 1950s-1970s, and automobile exhausts and the coal combustion emissions in recent decades.

State of the art and future challenges for polycyclic aromatic hydrocarbons is sediments: sources, fate, bioavailability and remediation techniques

Polycyclic aromatic hydrocarbons (PAHs) are amongst the most abundant contaminants found in the aquatic environment. Due to their toxicity and carcinogenicity, their sources, fate, behaviour, and cleanup techniques have been widely investigated in the last several decades. When entering the sediment-water system, PAH fate is determined by particular PAH and sediment physico-chemical properties. Most of the PAHs will be associated with fine-grained, organic-rich, sediment material. This makes sediment an ultimate sink for these pollutants. This association results in sediment contamination, and in this manner, sediments represent a permanent source of water pollution from which benthic organisms may accumulate toxic compounds, predominantly in lipid-rich tissues. A tendency for biomagnification can result in critical body burdens in higher trophic species. In recent years, researchers have developed numerous methods for measuring bioavailable fractions (chemical methods, non-exhaustive extraction, and biomimetic methods), as valuable tools in a risk-based approach for remediation or management of contaminated sites. Contaminated sediments pose challenging cleanup and management problems, as conventional environmental dredging techniques are invasive, expensive, and sometimes ineffective or hard to apply to large and diverse sediment sites. Recent studies have shown that a combination of strategies including in situ approaches is likely to provide the most effective long-term solution for dealing with contaminated sediments. Such in situ approaches include, but are not limited to: bioaugmentation, biostimulation, phytoremediation, electrokinetic remediation, surfactant addition and application of different sorbent amendments (carbon-rich such as activated carbon and biochar) that can reduce exposure and limit the redistribution of contaminants in the environment.

Anthropogenic PAHs in lake sediments: a literature review (2002-2018)

Lake sediments are an important reservoir for toxic and hydrophobic polycyclic aromatic hydrocarbons (PAHs). Monitoring of PAHs in sediment is helpful to understand pollution mechanisms and anthropogenic activities. This study reviews studies of PAHs in lake sediments published during 2002-2018. The studies' findings are analyzed, distributions of PAHs in lake sediments are summarized, and the applicability of lake sediments for tracking changes in PAH emission sources is emphasized. Lake sediments heavily polluted with PAHs are distributed in China, Egypt, the USA, and some urban lakes in Africa. The high levels of PAHs are predominantly associated with human activities such as anthropogenic combustion, petroleum industries, road traffic, and socioeconomic factors. However, the concentrations of sedimentary PAHs in most lakes were below the international guideline values.

Modeling and evaluating spatial variation of polycyclic aromatic hydrocarbons in urban lake surface sediments in Shanghai

To explore the influence of rapid urbanization development on the accumulation of 16 priority PAHs in urban environment, thirty-three surface sediments from city lakes in different urbanized areas of Shanghai were collected to evaluate the occurrence characteristic and source apportionment of PAHs. The concentrations of Σ₁₆PAHs in lake surface sediments ranged from 55.7 to 4928 ng g^-1 with a mean value of 1131 ng g^-1 (standard deviation, 1228 ng g^-1), of which 4-, 5- and 6-ring PAHs were the dominant components. Spatial distribution of PAHs in lake surface sediments showed a significantly declining trend along with a decreasing urbanization gradient (one-way ANOVA, p < .05). Two hotspots of sediment PAHs were mainly distributed at highly urbanized areas with intensive population density and heavy traffic activities and at burgeoning industrial towns in the suburb. Source apportionment of total PAHs identified by a constrained positive matrix factorization model revealed that vehicle emission and combustion of coal, biomass and natural gas were the absolutely predominant sources, respectively accounting for 55.0% and 40.45% of total PAHs burden in lake sediments. Land use regression (LUR) models were successfully developed to evaluate spatial variation of PAHs contamination in urban sediments based on their significant correlations with residential land, commercial land, traffic variables, industrial sources, and population density. All PAH compounds showed strong associations with one or two source indicators (the traffic congestion index and the number of industrial sources), with the fitting R² varying from 0.529 to 0.984. Our findings suggest that energy consumption related to land use activities obviously promoted PAH accumulations in urban sediment environment during rapid development of urbanization and industrialization in Shanghai.

Source apportionment of polycyclic aromatic carbons (PAHs) in sediment core from Honghu Lake, central China: comparison study of three receptor models

The spatial distribution of polycyclic aromatic hydrocarbons (PAHs) and their source contributions employing receptor models has been widely reported. However, the temporal distribution of PAH source contributions is less studied. Thus, in this paper, three receptor models including principle component analysis-multiple linear regression (PCA-MLR), positive matrix factorization (PMF), and Unmix were used to PAH source apportionment study in a sediment core from Honghu Lake, China. Sixteen USEPA priority PAHs in 37 sliced sediment layers (1-cm interval) were measured, with the concentrations of ∑₁₆PAH (sum of 16 PAHs) ranging from 93.0 to 431 ng g^-1. The source apportionment results derived from three receptor models were similar, with three common sources: mixed sources of biomass burning and coal combustion (31.0-41.4% on average), petroleum combustion (31.8-45.5%), and oil leakage (13.1-21.3%). The PMF model segregated an additional source: domestic coal combustion (contributed 20.9% to the ∑₁₆PAHs). Four aspects including intra-comparison, inter-comparison, source numbers and compositions, and source contributions were considered in comparison study. The results indicated that the PMF model was most reasonable in PAH source apportionment research in this study.

Spatial distribution and composition of aliphatic hydrocarbons, polycyclic aromatic hydrocarbons and hopanes in superficial sediments of the coral reefs of the Persian Gulf, Iran

This study is the first quantitative report on petroleum biomarkers from the coral reefs systems of the Persian Gulf. 120 reef surface sediment samples from ten fragile coral reef ecosystems were collected and analyzed for grain size, biogenic elements, elemental ratios, and petroleum biomarkers (n-alkanes, PAHs¹ and Hopanes) to assess the sources and early diagenesis of sedimentary organic matter. The mean grain size of the reef sediments ranged from 13.56 to 37.11% (Clay), 26.92 to 51.73% (Sand) and 35.97 to 43.85% (Silt). TOC² (3.35-9.72 mg.g^-1) and TON³ (0.4-1.10 mg.g^-1) were identified as influencing factors on the accumulation of petroleum hydrocarbons, whilst BC⁴ (1.08-3.28 mg.g^-1) and TIN⁵ (0.13-0.86) did not exhibit any determining effect. Although BC and TIN demonstrated heterogeneous spatial distribution, TOC and TON indicated homogenous distribution with continually upward trend in concentration from the east to west ward of the Gulf. The mean calculated TOC/TN ratios vacillated according to the stations (p < 0.05) from 2.96 at Shidvar Island to 8.64 at Hengam Island. The high TOC/TN ratios were observed in the Hengam (8.64), Kharg (8.04) and Siri (6.29), respectively, suggesting a predominant marine origin. The mean concentrations of ∑C_11-35n-alkanes, ∑30 PAHs and ∑9Hopanes were found in the ranges of 385-937 μg.g^-1dw, (overall mean:590 μg.g^-1dw), 326-793 ng.g^-1dw (499 ng.g^-1dw), 88 to 568 ng.g^-1 d (258 ng.g^-1dw), respectively. Higher concentrations of detected petroleum biomarkers in reef sediments were chiefly distributed near main industrial areas, Kharg, Lavan and Siri, whilst the lower concentrations were in Hormoz and Qeshm. In addition, one-way ANOVA⁶ analysis demonstrated considerably significant differences (p < 0.05) among concentration of detected total petroleum hydrocarbons between most sampling locations. Some sampling sites especially Kharg, Lavan, Siri and Lark indicated higher concentration of n-alkanes due to the higher maintenance of organic matter by high clay content in the sediments. Furthermore, most sediment samples, except for Hormoz, Qeshm and Hengam showed an even carbon preference for n-alkanes which could be correlated to bacterial input. NPMDS⁷ analysis also demonstrated that among the congeners of petroleum biomarkers, n-C₁₂,n-C₁₄, n-C₁₆,n-C₁₈ and n-C₂₀ for n-alkanes, Phe⁸ and Naph⁹ along with their Alkyl homologues for PAHs (2-3 rings accounted for 60%) and C₃₀αβ and C₂₉αβ for Hopanes were discriminated from their other congeners in the whole study area. Our results based on the PCA¹⁰ analysis and diagnostic indices of AHs¹¹ and PAHs along with ring classification of PAHs, in addition, the ubiquitous presence of UCM,¹² and Hopanes revealed that the main sources of the pollution were petroleum and petroleum combustion mainly from offshore oil exploration and extraction, discharge of pollutants from shipping activities.

Historical records and sources of polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in sediment from a representative plateau lake, China

The PAH and OCP concentrations in sediment cores collected from a deep lake were measured and evaluated chronologically. The results indicated that the PAH and OCP concentrations significantly increased from the 1950s to the 1990s and subsequently decreased to recent years. Integrated molecular diagnostic ratios indicated that the predominant petrogenic sources occurred from the 1950s-1980s. Petroleum and fuel combustion dominated the source of contamination more recently as a result of energy structure changes in this region. Additionally, HCHs and DDTs were the dominant OCP compounds, making up a majority of the total OCPs present (>85%). HCHs accounted for a larger ratio of the OCPs between the 1950s and 1980s, suggesting that HCHs were the dominant POPs in this period. DDTs then became dominant in the 1980s and later. High α/γ-HCH ratios suggested that the emission and conversion of local technical HCHs were the predominant HCHs source. The ratios of (DDE + p,p'-DDD)/DDTs and p,p'-DDT/DDTs indicated that the DDTs mainly originated from historical input. In addition, the dramatic decrease since the 1980s may be the result of China's banning of DDTs. However, DDTs were still present in the 1990s, suggesting DDTs were still used in this region and beyond.

Historical Profiles of Polycyclic Aromatic Hydrocarbons (PAHs) in Marine Sediment Cores from Northwest Spain

The northwest coast of Spain is characterized by an irregular coastline rich in marine life and with the highest mussel production in Europe. Taking this into account, the characterization of the pollution levels and the sources involved appear necessary. Not only were parent Polycyclic Aromatic Hydrocarbons (PAHs) analysed but also their alkylated homologues. In total, 35 compounds were analyzed in 5 sediment cores. Sediments were collected using a box core dredge and extracted by (Pressurized Liquid Extraction) whilst the quantification of PAHs was performed using gas chromatography coupled to mass spectrometry (GC-MS). The total concentration detected varied from 49.6 to 2489 ng g^-1 dry weight (d.w.) of which parent PAHs ranged from 44.5 to 2254 ng g^-1 d.w. and alkylated PAHs varied from 5.04 to 317 ng g^-1 d.w. Temporal and spatial evolution were outlined and pollution sources were identified along with a possible correlation between this pollution and local history and industry. Most of the PAHs from the superficial samples have a biomass and coal combustion profile, and some specific, localized events are reflected in the total PAH concentration evolution. Moreover, the study of the deepest layers of the sampled cores provides a baseline to develop background concentration values that will help in future sediment quality assessment.

Sources appointment and ecological risk assessment of polycyclic aromatic hydrocarbons (PAHs) in sediments of Erhai Lake, a low-latitude and high-altitude lake in southwest China

Sixteen polycyclic aromatic hydrocarbons (PAHs) were analyzed from the surficial sediments in Erhai Lake, a plateau lake in China. The results showed that except for acenaphthylene (Ace) Ace and Dibenz(a,h)anthracene (DBA), the central region contained individual PAHs at concentrations lower than those in other lake regions. Total concentration of the PAHs (ΣPAHs) in the sediments from Erhai Lake ranged from 32.42 to 558.53 mg/kg with a mean value of 256.70 mg/kg. The maximum value of ΣPAHs was observed in the north region of the lake and more than 10-fold higher than the minimum values. Moreover, high molecular weight (HMW) PAHs, especially 5-ring PAHs, accounted for higher ratios up to 76 % relative to other PAHs compound in almost all sampling sites. Molecular diagnostic ratios including anthtacene (Ant)/(Ant + phenanthrene (Phe)), fluoranthene (Flt)/(Flt + pyrene (Pyr)), benz(a)anthracene (BaA)/(BaA + chrysene (Chr)), and indeno(1,2,3-cd)pyrene (IPY)/(IPY + benz(g,h,i)perylene (BPE)) were recorded at all sampling sites and indicated that the origin of PAHs in Erhai Lake was predominately pyrolytic. Furthermore, principal component analysis with component dominating by HMW PAHs showed that combustion origins were the primary contamination sources of PAHs in the sediments of Erhai Lake. Finally, ecological risk assessment indicated that the sediments from Erhai Lake are exposed to potential low risk for ΣPAHs, and the ecological risk decreases in the order of northern region > southern region > central region.

Urban contamination sources reflected in inorganic pollution in urban lake deposits, Bergen, Norway

The 7000 years transition from a pristine environment towards a modern city has brought a number of chemical changes and effects to urban lake sediments in Bergen. Metals, such as Pb, Hg, Zn, Cu and Fe, display a large anthropogenic influence and reflect historical point sources that existed within the drainage area from approximately AD 1790 until today. The concentration peaks alternate with intervals of lower concentration due to phases of coarser grained sediment input but also periods of potentially reduced metal influx. All discussed elements, except Cd, increase in concentration with decreasing grain size and also correlate with the amount of clay fraction particles. The results emphasize the importance of considering grain size when interpreting sediment chemistry. Correlation with TOC is not apparent in the same extent. The transition from natural to anthropogenically influenced sediments, which is characterised by a sudden increase of several elements, is accompanied by a reduction in Cd, As and Ni concentration. This is interpreted to be the result of hypoxia, changes in pH and reduced erosional input. Factor analysis and the comparison with reference sediments indicate that the elements Pb, Hg, Zn and Cu most clearly demonstrate man-made pollution. Analyses of stormwater culvert sediments suggest that urban runoff contributes to the pollution load today, with standing building mass and traffic contributing to the load.

Source characterization of polycyclic aromatic hydrocarbons by using their molecular indices: an overview of possibilities

In recent decades. an exponential increase in the concentration of anthropogenic Polycyclic Aromatic Hydrocarbons (PAHs; see Table I for a li st of PAH abbreviations) has been observed worldwide. Regulators need to know the sources if concentrations are to be reduced and appropriate remediation measures taken. "Source characterization of PAHs" involves linking these contaminants to their sources. Scientists place PAH sources into three classes: pyrogenic, petrogenic. and natural. In this review. we investigate the possibility of using PAH molecular ratios individually or in combination for the purpose of deducing the petrogenic or pyrogenic origin of the contamination in sediments. We do this by reviewing the characteristic PAH patterns of the sources and by taking into account the fate of PAHs in the aquatic environment. Many PAH indicators have been developed for the purpose of discriminating different PAH sources. In Table 4 we summarize the applicability of different PAH ratios and threshold values. The analysis of two- to four-ringed alkylated PAH soilers the possibility to distinguish two or more single sources or categories of pollution in greater detail. For example. the FLO/PYO. the PPI. and PO/AO ratios can be used to discriminate between pyrogenic and petrogcnic sources of contamination. When petrogenic contamination is suspected. chrysenes. PAHs lighter than CO. and in particular. alkylated PAHs can usually be of use. For unburned coal PAHs. The methylphenanthrenic ratios (MP!s). the 1-D I/4- DI. and BbF/BkF are promising, since they are sometimes correlated with vitrinite rellectance (coal ranks). Alkylphenanthrenes can be used to detect biomass combustion. Higher molecular weight parent and alkylated PAHs are appropriate for pyrogenic discriminations. When PAH indices are coupled with discriminant analysis techniques such as PMF (positive matrix factorization),the origin of multiple sources in even the most complex environments can be traced and measured. Even so. the most stable isomer pairs degrade differentially. depending on their thermodynamic stability, the environmental conditions, and the type of degradation. If PAH ratios are to be used, it is usually necessary to have pri or knowledge of the degradation state of the matrices examined (air, sediment, etc.) and of how the PAH ratio behaves under such conditions. PAH ind ices (e.g ., NO/CO or LPAH/HPAH ) can be app lied for distinguishing differential degradation gradients (photodegradation, biodegradation, etc.). Degradation does not significantly affect the ratio of parent to alkylated PAHs and the PI. The degradation arrow in Table 4 and Figs. 9. I 0. II . 12. 13, 14. 15. 17. 18. 19, 20, 2 1, 22. 23. and 24 shows how the ratio usually changes with degradation. Merely detecting the six PAHs of Borneff6 is not enough to establish petrogenic contamination, because Borneff6 includes main ly HMW PAHs. The LPAH 16 appears to be the most suitable for identify ing pyrogenic and petrogenic sources. For more specific information on sources and their discrimination it is recommended to further take into account important parent PAHs such as NO. BeP. PER. DO. and-most importantly- alkylatcd PAHs.