Indoor secondary organic aerosols formation from ozonolysis of monoterpene: An example of d-limonene with ammonia and potential impacts on pulmonary inflammations

Recent advances on SOA formation in indoor air, fate and strategies for SOA characterization in indoor air - A review

Recent studies proves that indoor air chemistry differs in many aspects from atmospheric one. People send up to 90 % of their life indoors being exposed to pollutants present in gas, particle and solid phase. Particle phase indoor is composed of particles emitted from various sources, among which there is an indoor source - secondary chemical reactions leading to formation of secondary organic aerosol (SOA). Lately, researchers' attentions turned towards the ultrafine particles, for there are still a lot of gaps in knowledge concerning this field of study, while there is evidence of negative influence of ultrafine particles on human health. Presented review sums up current knowledge about secondary particle formation in indoor environment and development of analytical techniques applied to study those processes. The biggest concern today is studying ROS, for their lifetime in indoor air is very short due to reactions at the very beginning of terpene oxidation process. Another interesting aspect that is recently discovered is monoterpene autooxidation process that leads to HOMs formation that in turn can influence SOA formation yield. A complex studies covering gas phase and particle phase characterization, but also toxicological studies are crucial to fully understand indoor air chemistry leading to ultrafine particle formation.

Probing autoxidation of oleic acid at air-water interface: A neglected and significant pathway for secondary organic aerosols formation

Fatty acids have been proposed to be a potential source of precursors for SOAs, but the autoxidation process was neglected in the oxidation studies. Here, the autoxidation of oleic acid was explored using microdroplet mass spectrometry. Bulk solution, concentration and solvent composition experiments provided direct evidences for that the autoxidation occurred at or near the air-water interface. The kinetic data showed an acceleration at this interface and was comparable to ozonation, indicating that autoxidation is an important pathway for SOAs formation. In addition, intermediates/products were captured and identified using tandem mass spectrometry, spin-trapping and quenched agents. The autoxidation mechanism was divided into addition intermediates (AIs) and Criegee intermediates (CIs) pathways mediated by hydroxyl radicals (OH). The CI chemistry which is ubiquitous in gas phase was observed at the air-water interface, and this leaded to the mass/volume loss of aerosols. Inversely, the AI chemistry caused the increase of mass, density and hygroscopicity of aerosols. AI chemistry was dominated compared to CI chemistry, but varied by concerning aerosol sizes, ultraviolet light (UV) and charge. Moreover, the MS approach of selectively probing the interfacial substances at the scale of sub-seconds opens new opportunities to study heterogeneous chemistry in atmosphere.

Pathogenic Mechanisms of Secondary Organic Aerosols

Air pollution represents a major health problem and an economic burden. In recent years, advances in air pollution research has allowed particle fractionation and identification of secondary organic aerosol (SOA). SOA is formed from either biogenic or anthropogenic emissions, through a mass transfer from the gaseous mass to the particulate phase in the atmosphere. They can have deleterious impact on health and the mortality of individuals with chronic inflammatory diseases. The pleiotropic effects of SOA could involve different and interconnected pathogenic mechanisms ranging from oxidative stress, inflammation, and immune system dysfunction. The purpose of this review is to present recent findings about SOA pathogenic roles and potential underlying mechanisms focusing on the lungs; the latter being the primary exposed organ to atmospheric pollutants.

Chemistry and human exposure implications of secondary organic aerosol production from indoor terpene ozonolysis

Surface cleaning using commercial disinfectants, which has recently increased during the coronavirus disease 2019 pandemic, can generate secondary indoor pollutants both in gas and aerosol phases. It can also affect indoor air quality and health, especially for workers repeatedly exposed to disinfectants. Here, we cleaned the floor of a mechanically ventilated office room using a commercial cleaner while concurrently measuring gas-phase precursors, oxidants, radicals, secondary oxidation products, and aerosols in real-time; these were detected within minutes after cleaner application. During cleaning, indoor monoterpene concentrations exceeded outdoor concentrations by two orders of magnitude, increasing the rate of ozonolysis under low (<10 ppb) ozone levels. High number concentrations of freshly nucleated sub-10-nm particles (≥10⁵ cm^-3) resulted in respiratory tract deposited dose rates comparable to or exceeding that of inhalation of vehicle-associated aerosols.

Anthropogenic-Biogenic Interactions at Night: Enhanced Formation of Secondary Aerosols and Particulate Nitrogen- and Sulfur-Containing Organics from β-Pinene Oxidation

Mixing of anthropogenic gaseous pollutants and biogenic volatile organic compounds impacts the formation of secondary aerosols, but still in an unclear manner. The present study explores secondary aerosol formation via the interactions between β-pinene, O₃, NO₂, SO₂, and NH₃ under dark conditions. Results showed that aerosol yield can be largely enhanced by more than 330% by NO₂ or SO₂ but slightly enhanced by NH₃ by 39% when the ratio of inorganic gases to β-pinene ranged from 0 to 1.3. Joint effects of NO₂ and SO₂ and SO₂ and NH₃ existed as aerosol yields increased with NO₂ but decreased with NH₃ when SO₂ was kept constant. Infrared spectra showed nitrogen-containing aerosol components derived from NO₂ and NH₃ and sulfur-containing species derived from SO₂. Several particulate organic nitrates (MW 215, 229, 231, 245), organosulfates (MW 250, 264, 280, 282, 284), and nitrooxy organosulfates (MW 295, 311, 325, 327, and 343) were identified using high-resolution orbitrap mass spectrometry in NO₂ and SO₂ experiments, and their formation mechanism is discussed. Most of these nitrogen- and sulfur-containing species have been reported in ambient particles. Our results suggest that the complex interactions among β-pinene, O₃, NO₂, SO₂, and NH₃ during the night might serve as a potential pathway for the formation of particulate nitrogen- and sulfur-containing organics, especially in polluted regions with both anthropogenic and biogenic influences.

Measurements and analysis of non-methane VOC (NMVOC) emissions from major domestic aerosol sprays at "source"

Non-Methane Volatile Organic Compounds (NMVOCs) from domestic aerosol sprays are emerging pollutants and have substantial negative effects on human health and the environment. This study, for the first time, carried out quantification of the NMVOC emissions from off-the-shelf domestic aerosol sprays, at "source" in the UK. These aerosol sprays contain harmful organic compounds as propellants and products. The results showed that the cosmetic category (i.e. body sprays) have higher concentrations of NMVOCs with 93.7 wt% per can compared to households (i.e. air fresheners) with 62 wt%. Also, water-based products showed less NMVOCs in all analyses compared to solvent-based formulations. Direct replacement of Liquefied Petroleum Gas (LPG) propellants from conventional products with 'clean air' (i.e. nitrogen) showed the potential emission reduction of 50%. Hair spray products, however, have the highest ozone forming potential with about 105.1 g of Ozone per litre of the product compared to other domestic aerosol sprays. The level of global warming contribution of the selected aerosol sprays in the UK was measured to be 129.8 ktCO₂e in 2018 and globally, this can be projected to be 3154.6 ktCO₂e in 2020. Furthermore, NMVOC emissions contribution from the domestic aerosol sprays in the UK was measured as 61.2 kt in 2018 based on annual consumption of 520 million cans. Globally this can equate to 1437.6 kt based on the projected usage of 17.5 billion cans. Therefore, it is vital to expedite replacing LPG propellant with nitrogen in a drive for a 'near-zero' emission in aerosol industry. The results presented in this study can also be used to steer policy makers to the potentially brewing danger from an otherwise passive emission source.

Can limonene be a possible candidate for evaluation as an agent or adjuvant against infection, immunity, and inflammation in COVID-19?

Coronavirus disease (COVID-19) caused by novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is an ongoing pandemic and presents a public health emergency. It has affected millions of people and continues to affect more, despite the tremendous social preventive measures. The therapeutic strategy relies on suppressing infectivity and inflammation, along with immune modulation. The identification of candidate drugs effective for COVID-19 is crucial, thus many natural products including phytochemicals are also being proposed for repurposing and evaluated for their potential in COVID-19. Among numerous phytochemicals, limonene (LMN), a dietary terpene of natural origin has been recently showed to target viral proteins in the in-silico studies. LMN is one of the main compounds identified in many citrus plants, available and accessible in diets and well-studied for its therapeutic benefits. Due to dietary nature, relative safety and efficacy along with favorable physicochemical properties, LMN has been suggested to be a fascinating candidate for further investigation in COVID-19. LMN showed to modulate numerous signaling pathways and inhibits inflammatory mediators, including cytokines, chemokines, adhesion molecules, prostanoids, and eicosanoids. We hypothesized that given the pathogenesis of COVID-19 involving infection, inflammation, and immunity, LMN may have potential to limit the severity and progression of the disease owing to its immunomodulatory, anti-inflammatory, and antiviral properties. The present article discusses the possibilities of LMN in SARS-CoV-2 infections based on its immunomodulatory, anti-inflammatory, and antiviral properties. Though, the suggestion on the possible use of LMN in COVID-19 remains inconclusive until the in-silico effects confirmed in the experimental studies and further proof of the concept studies. The candidature of LMN in COVID-19 treatment somewhat appear speculative but cannot be overlooked provided favorable physiochemical and druggable properties. The safety and efficacy of LMN are necessary to be established in preclinical and clinical studies before making suggestions for use in humans.

Characteristics of fresh and aged volatile organic compounds from open burning of crop residues

Open burning of crop residues is a major source of volatile organic compounds (VOCs), which contribute substantially to the formation of secondary organic aerosols (SOAs) in the atmosphere. An integrated system of combustion chamber coupled with potential aerosol mass (PAM) reactor was used to demonstrate the emission characteristics of fresh and aged VOCs (corresponding to 2- and 7-day atmospheric aging) from the burning of rice, maize, and wheat straws. The average emission factor (EF) of quantified non-methane VOCs (NMVOCs) emitted from the straw (fresh) was 1.82 ± 0.41 g/kg and wheat straw had the highest EFs. The EF residues of quantified NMVOCs decreased considerably after photo-oxidation in PAM. Stronger oxidation condition (7-day aging) produced a 57.2% decline in NMVOC EFs, compared with 42.3% decline during 2-day atmospheric aging. The largest declines were observed in the alkenes group: 82.6% and 66.2% after 7- and 2-day aging, respectively, which is consistent with their high reactivity toward oxidation with ozone and hydroxyl radical (OH). Aromatic compounds mainly reacted with OH, and their EFs decreased 59.1% on average. Alkanes were much less reactive, and their EFs only decreased an average of 29.8% after the oxidation processes. Considerable SOAs formation was observed in the fine particulate matter (PM_2.5) filter samples collected after the oxidation of isoprene, benzene and toluene. The moderate to strong correlations between isoprene and isoprene-derived SOAs, between benzene and toluene with nitrophenols, and between toluene and aromatic acids demonstrate that the VOCs were degraded in the reactions with oxidative radicals, producing active contributors to SOAs formations.

Indoor acids and bases

Numerous acids and bases influence indoor air quality. The most abundant of these species are CO₂ (acidic) and NH₃ (basic), both emitted by building occupants. Other prominent inorganic acids are HNO₃ , HONO, SO₂ , H₂ SO₄ , HCl, and HOCl. Prominent organic acids include formic, acetic, and lactic; nicotine is a noteworthy organic base. Sources of N-, S-, and Cl-containing acids can include ventilation from outdoors, indoor combustion, consumer product use, and chemical reactions. Organic acids are commonly more abundant indoors than outdoors, with indoor sources including occupants, wood, and cooking. Beyond NH₃ and nicotine, other noteworthy bases include inorganic and organic amines. Acids and bases partition indoors among the gas-phase, airborne particles, bulk water, and surfaces; relevant thermodynamic parameters governing the partitioning are the acid-dissociation constant (K_a ), Henry's law constant (K_H ), and the octanol-air partition coefficient (K_oa ). Condensed-phase water strongly influences the fate of indoor acids and bases and is also a medium for chemical interactions. Indoor surfaces can be large reservoirs of acids and bases. This extensive review of the state of knowledge establishes a foundation for future inquiry to better understand how acids and bases influence the suitability of indoor environments for occupants, cultural artifacts, and sensitive equipment.

Human Ammonia Emission Rates under Various Indoor Environmental Conditions

Ammonia (NH₃) is typically present at higher concentrations in indoor air (∼10-70 ppb) than in outdoor air (∼50 ppt to 5 ppb). It is the dominant neutralizer of acidic species in indoor environments, strongly influencing the partitioning of gaseous acidic and basic species to aerosols, surface films, and bulk water. We have measured NH₃ emissions from humans in an environmentally controlled chamber. A series of experiments, each with four volunteers, quantified NH₃ emissions as a function of temperature (25.1-32.6 °C), clothing (long-sleeved shirts/pants or T-shirts/shorts), age (teenagers, adults, and seniors), relative humidity (low or high), and ozone (<2 ppb or ∼35 ppb). Higher temperature and more skin exposure (T-shirts/shorts) significantly increased emission rates. For adults and seniors (long clothing), NH₃ emissions are estimated to be 0.4 mg h^-1 person^-1 at 25 °C, 0.8 mg h^-1 person^-1 at 27 °C, and 1.4 mg h^-1 person^-1 at 29 °C, based on the temperature relationship observed in this study. Human NH₃ emissions are sufficient to neutralize the acidifying impacts of human CO₂ emissions. Results from this study can be used to more accurately model indoor and inner-city outdoor NH₃ concentrations and associated chemistry.

Water uptake by indoor surface films

Indoor surfaces provide a plentiful and varied substrate on which multiphase reactions can occur which can be important to the chemical makeup of the indoor environment. Here, we attempt to characterise real indoor surface films via water uptake behaviour and ionic composition. We show that water uptake by indoor films is different than that observed outdoors, and can vary according to room use, building characteristics, and season. Similarly, preliminary investigation into the ionic composition of the films showed that they varied according to the room in which they were collected. This study highlights the importance of different types of soiling to multiphase chemistry, especially those reactions controlled by relative humidity or adsorbed water.

Impact of weather and climate change with indoor and outdoor air quality in asthma: A Work Group Report of the AAAAI Environmental Exposure and Respiratory Health Committee

Weather and climate change are constant and ever-changing processes that affect allergy and asthma. The purpose of this report is to provide information since the last climate change review with a focus on asthmatic disease. PubMed and Internet searches for topics included climate and weather change, air pollution, particulates, greenhouse gasses, traffic, insect habitat, and mitigation in addition to references contributed by the individual authors. Changes in patterns of outdoor aeroallergens caused by increasing temperatures and amounts of carbon dioxide in the atmosphere are major factors linked to increased duration of pollen seasons, increased pollen production, and possibly increased allergenicity of pollen. Indoor air pollution threats anticipated from climate changes include microbial and mold growth secondary to flooding, resulting in displacement of persons and need for respiratory protection of exposed workers. Air pollution from indoor burning of mosquito repellants is a potential anticipatory result of an increase in habitat regions. Air pollution from fossil fuel burning and traffic-related emissions can alter respiratory defense mechanisms and work synergistically with specific allergens to enhance immunogenicity to worsen asthma in susceptible subjects. Community efforts can significantly reduce air pollution, thereby reducing greenhouse gas emission and improving air quality. The allergist's approach to weather pattern changes should be integrated and anticipatory to protect at-risk patients.

Experimental Views of Tran-Bend Particle Deposition in Turbulent Flow with Nanoscale Effect

This paper presented experimental views of nano- and microaerosol distribution and deposition in turbulent tran-bend flows. These views included the particle flow measurement and particle depositions through individual bends, bifurcation bends, and those behind bends. Selected experiments were summarized and compared according to the gas flow, the bend geometry, and the particle flow properties. Based on recent studies, the influencing factors of environmental humidity, particle and surface properties, nanoparticle formation, coagulation, or evolution phenomena were discussed, and then research suggestions were given for future research and applications. It is specially mentioned that the new particle formation and nanoparticle growth affect its deposition under environmental contaminant conditions; nanoscale particle dynamics and transport have a growing trend on attracting the research and industry attentions.

The ozonolysis of cyclic monoterpenes: a computational review

Monoterpenes are prevalent organic compounds emitted to the atmosphere, via biogenic activities in various types of plants. Monoterpenes undergo atmospheric decomposition reactions derived by the potent atmospheric oxidizing agents, OH, O3, and NOx. This review critically surveys literature pertinent to the atmospheric removal of monoterpenes by ozone. In general, the ozonolysis reactions of monoterpenes occur through the so-called Criegee mechanism. These classes of reactions generate a wide array of chemical organic and inorganic low vapor pressure (LVP) species. Carbonyl oxides, commonly known as Criegee intermediates (CIs), are the main intermediates from the gas-phase ozonolysis reaction. Herein, we present mechanistic pathways, reactions rate constants, product profiles, thermodynamic, and kinetic results dictating the ozonolysis reactions of selected monoterpenes (namely carene, camphene, limonene, α-pinene, β-pinene, and sabinene). Furthermore, the unimolecular (vinyl hydroperoxide and ester channels) and bimolecular reactions (cycloaddition, insertion, and radical recombination) of the resulting CIs are fully discussed. The orientations and conformations of the resulting primary ozonides (POZs) and CIs of monoterpenes are classified to reveal their plausible effects on reported thermokinetic parameters.