Adsorption behavior of three triazole fungicides on polystyrene microplastics

Agricultural film-derived microplastics elevate the potential risk of pesticides in soil ecosystem: The inhibited leaching by altering soil pore

The residue of mulch film is a crucial source of microplastics (MPs) in agricultural fields. The effects of mulch film-derived MPs on the environmental behavior of pesticides in agriculture remain unclear. In the present study, the effects of MPs of different sizes (5 mm, 1 mm, 30 µm, and 0.3 µm) at environmentally relevant concentrations on pesticide transport were evaluated, and the mechanism was explored with respect to adsorption and pore structure using fluorescence visualization, the extended Derjaguin-Landau-Verwey-Overbeek model, and microcomputed tomography. MPs were found to be retained in the soil due to size limitation, pore capture, and surface adhesion. The presence of mm-sized MPs (5 and 1 mm) at a concentration of 0.25 % inhibited the leaching behavior of atrazine, metolachlor, and tebuconazole. MPs did not significantly alter the pesticide adsorption ability of the soil. The reduced leaching originated from the impact of MPs on soil pore structure. Specifically, the porosity increased by 16.2-25.0 %, and the connectivity decreased by 34.5 %. These results demonstrate that mm-sized MPs inhibit pesticide leaching by obstructing the pores and altering the transport pathways, thereby potentially elevating environmental risks, particularly to the soil ecosystem.

Adsorption-desorption and leaching behavior of benzovindiflupyr in different soil types

Benzovindiflupyr is a succinate dehydrogenase inhibitor fungicide that targets mitochondrial function for disease control. In this study, we investigated the adsorption-desorption and leaching behavior of benzovindiflupyr in eight soil types using the batch equilibrium method and the soil column leaching method. A Freundlich model (r2 > 0.9959) was used to better characterize the adsorption-desorption process in eight soil types, with adsorption coefficients (KF-ads) ranging from 2.303 to 17.886. KF-ads was significantly and positively correlated (p < 0.05) with the organic carbon content. High temperatures and increased initial pH of aqueous solutions led to a decrease in benzovindiflupyr adsorption in the soil. The adsorption was also influenced by factors such as ionic strength, humic acid, surfactant type, microplastic type, and particle size and concentration. Moreover, benzovindiflupyr exhibited low leachability in all four soils selected, but different leaching solutions affected the risk of benzovindiflupyr migration to groundwater. Overall, this study provides insights into the adsorption characteristics of benzovindiflupyr in different soils and provides key information for environmental risk assessment.

Interaction behavior, mechanisms and hazardous changes of microplastics on single and binary component pesticide in the environment and food: Diethofencarb and pyrimethanil

In order to investigate the adsorption behavior and mechanism of microplastics (MPs) on multiple coexisting pesticides in practical systems, as well as their hazardous changes upon binding, diethofencarb and pyrimethanil were selected to be studied with four MPs. The adsorption rate of both pesticides would be faster in the binary-component case, conforming to pseudo-second-order kinetics, with adsorption sites and chemical adsorption dominating. And the more hydrophobic the pesticide, the faster the adsorption rate and the higher the adsorption capacity. Diethofencarb belonged to monolayer adsorption, whereas pyrimethanil belonged to monomolecular combined with multilayer adsorption, depending on the size of pesticides. And the adsorption process was both competitive and synergistic when pesticides coexist. In addition, the adsorption process was a spontaneous heat absorption process. Electrostatic forces have little effect on adsorption, while the adsorption capacity can be altered by the adsorption sites and hydrophobicity of MPs. The salting-out effect also facilitated the adsorption process. As for changes in hazard, the bioluminescence of A. fischeri wasn't significantly inhibited, lacking of acute environmental toxicity. However, in vitro digestion experiments demonstrated a significant increase in bioavailability of diethofencarb and pyrimethanil in combination with MPs. These findings suggest the stronger adsorption behaviors and higher loading capacities between pesticides and MPs could lead more serious hazards to the human body, which deserves further attention.

Effect of microplastics used in agronomic practices on agricultural soil properties and plant functions: Potential contribution to the circular economy of rural areas

The extensive use of plastic materials and their improper disposal results in high amounts of plastic waste in the environment. Aging of plastics leads to their breakdown into smaller particles, such as microplastics (MPs) and nanoplastics. This research investigates plastics used in agricultural practices as they contribute to MP pollution in agricultural soils. The distribution and characteristics of MPs in agricultural soils were evaluated. In addition, the effect of MPs on soil properties, the relationship between MPs and metals in soil, the effect of MPs on the fate of pesticides in agricultural soils and the influence of MPs on plant growth were analysed, discussing legume, cereal and vegetable crops. Finally, a brief description of the main methods of chemical analysis and identification of MPs is presented. This study will contribute to a better understanding of MPs in agricultural soils and their effect on the soil-plant system. The changes induced by MPs in soil parameters can lead to potential benefits as it is possible to increase the availability of micronutrients and reduce plant uptake of toxic elements. Furthermore, although plastic pollution remains an emerging threat to soil ecosystems, their presence may result in benefits to agricultural soils, highlighting the principles of the circular economy.

Microplastics supply contaminants in food chain: non-negligible threat to health safety

The occurrence of microplastics (MPs) and organic pollutants (OPs) residues is commonly observed in diverse environmental settings, where their interactions can potentially alter the behavior, availability, and toxicity of OPs, thereby posing risks to ecosystems. Herein, we particularly emphasize the potential for bioaccumulation and the biomagnification effect of MPs in the presence of OPs within the food chain. Despite the ongoing influx of novel information, there exists a dearth of data concerning the destiny and consequences of MPs in the context of food pollution. Further endeavors are imperative to unravel the destiny and repercussions of MPs/OPs within food ecosystems and processing procedures, aiming to gain a deeper understanding of the joint effect on human health and food quality. Nevertheless, the adsorption and desorption behavior of coexisting pollutants can be significantly influenced by MPs forming biofilms within real-world environments, including temperature, pH, and food constituents. A considerable portion of MPs tend to accumulate in the epidermis of vegetables and fruits, thus necessitating further research to comprehend the potential ramifications of MPs on the infiltration behavior of OPs on agricultural product surfaces.

Transport of polyethylene and polypropylene microplastics under the action of agricultural chemicals: Role of pesticide adjuvants and neonicotinoid active ingredients

Understanding the impact of various agricultural chemical components on the fate and transport of microplastics (MPs) in the subsurface is essential. In this study, column experiments on saturated porous media were conducted to explore the influence of the coexistence environment of pesticide adjuvants (surfactants) and active ingredients (neonicotinoids) on the transport of polyethylene (PE) and polypropylene (PP) MPs. An anionic surfactant (sodium dodecyl sulfate (SDS)), a nonionic surfactant (nonylphenol ethoxylate (NP-40)), and three neonicotinoid insecticides (acetamiprid, dinotefuran, and nitenpyram) could independently increase MP migration by 9.31%-61.01% by improving the hydrophilicity. Acetamiprid or dinotefuran reduced the adhesion work of the binary system by competing with SDS for adsorption sites, thereby inhibiting PE mobility. However, nitenpyram in the mixture was not easily adsorbed on the surface of PE MPs together with SDS because of nitenpyram's high hydrophilicity. Neonicotinoid molecules could not reduce the hydrophilic modification of SDS on PP MPs by competing for adsorption sites. Owing to their weak charge and adhesion work of nonionic surfactants (-4.80 mV and 28.45 kT for PE and -8.21 mV and 17.64 kT for PP), neonicotinoids tended to occupy the adsorption sites originally belonging to NP-40. The long molecular chain of NP-40 made it difficult for high-concentration neonicotinoids to affect the adhesion on MPs. In addition, NP-40 was harder to peel off from the MP surface than SDS, leading to a larger MP transport ability in the sand column.

Predicting the bioavailability of polycyclic aromatic hydrocarbons in rhizosphere soil using a new novel in situ solid-phase microextraction technique

In situ measurement of the bioavailability of organic pollutants in soil is crucial for understanding their environmental behavior and assessing health risks. Due to the high heterogeneity of soil, microscale determination is crucial for achieving high accuracy, but few methods are available. In this study, microsized probes coated with polydimethylsiloxane (PDMS) were used to measure the bioavailability of polycyclic aromatic hydrocarbons (PAHs) in soil in situ. The concentrations of PAHs enriched by the PDMS-coated probes correlated well with the results of bioassays using earthworms (R2 = 0.92-0.99) and ryegrass roots (R2 = 0.92-0.99). Compared with other chemical extraction methods, such as n-butanol extraction, the proposed method has advantages such as in situ operation, microvolume analysis, and negligible interference to the soil environment. In the soil rhizosphere zone, PAHs bioavailability decreased in the following order: rhizosphere > near-rhizosphere > far-rhizosphere. The bioavailability of PAHs in soil amended with biochar was also successfully characterized by the proposed method. Thus, this study developed an in situ and microscale method to predict the bioavailability of organic pollutants in contaminated soils and provides new insight into migration and transformation processes in rhizosphere soil.

Challenges and Recent Analytical Advances in Micro/Nanoplastic Detection

Despite growing ecological concerns, studies on microplastics and nanoplastics are still in their initial stages owing to technical hurdles in analytical techniques, especially for nanoplastics. We provide an overview of the general attributes of micro/nanoplastics in natural environments and analytical techniques commonly used for their analysis. After demonstrating the analytical challenges associated with the identification of nanoplastics due to their distinctive characteristics, we discuss recent technological advancements for detecting nanoplastics.

Adsorption behavior of triazine pesticides on polystyrene microplastics aging with different processes in natural environment

The presence of microplastics in the ecological environment, serving as carriers for other organic pollutants, has garnered widespread attention. These microplastics exposed in the environment may undergo various aging processes. However, there is still a lack of information regarding how these aged microplastics impact the environmental behavior and ecological toxicity of pollutants. In this study, we modified polystyrene microplastics by simulating the aging behavior that may occur under environmental exposure, and then explored the adsorption behavior and adsorption mechanism of microplastics before and after aging for typical triazine herbicides. It was shown that all aging treatments of polystyrene increased the adsorption of herbicides, the composite aged microplastics had the strongest adsorption capacity and the fastest adsorption rate, and of the three herbicides, metribuzin was adsorbed the most by microplastics. The interactions between microplastics and herbicides involved mechanisms such as hydrophobic interactions, surface adsorption, the effect of π-π interactions, and the formation of hydrogen bonds. Further studies confirmed that microplastics adsorbed with herbicides cause greater biotoxicity to E. coli. These findings elucidate the interactions between microplastics before and after aging and triazine herbicides. Acting as carriers, they alter the environmental behavior and ecological toxicity of organic pollutants, providing theoretical support for assessing the ecological risk of microplastics in water environments.

The combined toxicity of polystyrene nano/micro-plastics and triphenyl phosphate (TPHP) on HepG2 cells

Combined toxicity is a critical concern during the risk assessment of environmental pollutants. Due to the characteristics of strong hydrophobicity and large specific surface area, microplastics (MPs) and nanoplastics (NPs) have become potential carriers of organic pollutants that may pose a health risk to humans. The co-occurrence of organic pollutants and MPs would cause adverse effects on aquatic organism, while the information about combined toxicity induced by organophosphorus flame retardants and MPs on human cells was limited. This study aimed to reveal the toxicity effects of co-exposure to triphenyl phosphate (TPHP) and polystyrene (PS) particles with micron-size/nano-size on HepG2 cell line. The adsorption behaviors of TPHP on PS particles was observed, with the PS-NP exhibiting a higher adsorption capacity. The reactive oxygen species generation, mitochondrial membrane potential depolarization, lactate dehydrogenase release and cell apoptosis proved that PS-NPs/MPs exacerbated TPHP-induced cytotoxicity. The particle size of PS would affect the toxicity to HepG2 cells that PS-NP (0.07 μm) exhibited more pronounced combined toxicity than PS-MP (1 μm) with equivalent concentrations of TPHP. This study provides fundamental insights into the co-toxicity of TPHP and PS micro/nanoplastics in HepG2 cells, which is crucial for validating the potential risk of combined toxicity in humans.

Investigation the existence and mechanism of Cu(II)-sulfamethoxazole co-pollution by road-deposited sediments in stormwater runoff

In recent years, the escalating attention on Pharmaceutical and Personal Care Products (PPCPs) and Heavy Metals in urban stormwater runoff highlights the critical role of Road-deposited sediments (RDS) as a significant carrier for pollutant occurrence and transport in runoff. However, existing research has overlooked the composite characteristics of PPCPs and Heavy Metals, hampering a holistic understanding of their transformation in diverse forms within runoff. This limitation impedes the exploration of their subsequent migration and conversion properties, thereby obstructing coordinated strategies for the control of co-pollution in runoff. This study focuses on the typical PPCP sulfamethoxazole (SMX) and heavy metal Cu(II) to analyze their occurrence characteristics in the Runoff-RDS system. Kinetics and isotherm studies reveal that RDS effectively accumulates SMX and Cu(II), with both exhibiting rapid association with RDS in the early stages of runoff. The accumulation of SMX and Cu(II) accounts for over 80 % and 70 % of the total accumulation within the first 240 min and 60 min, respectively. Moreover, as runoff pH values decrease, the initially synergistic effect between the co-pollutant transforms into an antagonistic effect. In the composite system, varying pH values from 2.0 to 6.0 lead to an increase in SMX accumulation from 4.01 mg/kg to 6.19 mg/kg and Cu(II) accumulation from 0.43 mg/g to 3.39 mg/g. Compared to the single system, the composite system capacity for SMX and Cu(II) increases by 0.04 mg/kg and 0.33 mg/g at pH 4.0. However, at pH 3.0, the composite system capacity for SMX and Cu(II) decreases by 0.21 mg/kg and 0.36 mg/g, respectively. Protonation/deprotonation of SMX under different pH conditions influences electrostatic repulsion/attraction between SMX and RDS. The mechanism of RDS accumulation of SMX involves Electron Donor-Acceptor (EDA) interaction, hydrogen bond interaction, and Lewis acid-base interaction. Cu(II) enrichment on RDS includes surface complexation reaction, electrostatic interaction, and surface precipitation. Complex formation enhances the accumulation of both SMX and Cu(II) on RDS in runoff. This study elucidates the co-occurrence characteristics and mechanisms of SMX and Cu(II) co-pollution in runoff systems. The findings contribute valuable insights to understanding the existence patterns and mechanisms of co-pollution, providing a reference for investigating the migration and fate of co-pollutant in runoff. Moreover, these insights could offer guidance for the development of effective strategies to mitigate co-pollution in rainwater.

Combined toxic effects of polyethylene microplastics and lambda-cyhalothrin on gut of zebrafish (Danio rerio)

Microplastics (MPs), which are prevalent and increasingly accumulating in aquatic environments. Other pollutants coexist with MPs in the water, such as pesticides, and may be carried or transferred to aquatic organisms, posing unpredictable ecological risks. This study sought to assess the adsorption of lambda-cyhalothrin (LCT) by virgin and aged polyethylene MPs (VPE and APE, respectively), and to examine their influence on LCT's toxicity in zebrafish, specifically regarding acute toxicity, oxidative stress, gut microbiota and immunity. The adsorption results showed that VPE and APE could adsorb LCT, with adsorption capacities of 34.4 mg∙g-1 and 39.0 mg∙g-1, respectively. Compared with LCT exposure alone, VPE and APE increased the acute toxicity of LCT to zebrafish. Additionally, exposure to LCT and PE-MPs alone can induce oxidative stress in the zebrafish gut, while combined exposure can exacerbate the oxidative stress response and intensify intestinal lipid peroxidation. Moreover, exposure to LCT or PE-MPs alone promotes inflammation, and combined exposure leads to downregulation of the myd88-nf-κb related gene expression, thus impacting intestinal immunity. Furthermore, exposure to APE increased LCT toxicity to zebrafish more than VPE. Meanwhile, exposure to PE-MPs and LCT alone or in combination has the potential to affect gut microbiota function and alter the abundance and diversity of the zebrafish gut flora. Collectively, the presence of PE-MPs may affect the toxicity of pesticides in zebrafish. The findings emphasize the importance of studying the interaction between MPs and pesticides in the aquatic environment.

Co-exposure to polystyrene microplastics and cypermethrin enhanced the effects on hepatic phospholipid metabolism and gut microbes in adult zebrafish

Microplastics (MPs) can absorb environmental pollutants from the aquatic environment to cause mixed toxicity, which has received widespread attention. However, studies on the joint effects of MPs and insecticides are limited. As one of the most widely used pyrethroids, there was a large amount of residual cypermethrin (CYP) in water due to insufficient decomposition. Here, adult female zebrafish were exposed to MPs, CYP, and their mixtures for 21 days, respectively. After exposures, the MPs and CYP caused tissue damage to the liver. Hepatic triglyceride (TG) level increased significantly after MPs + CYP exposure, and the expression of genes about glycolipids metabolism was significantly altered. Furthermore, metabolome results suggested that MPs + CYP exposure resulted in increased content of some glycerophospholipid, affecting phospholipid metabolism-related pathways. In addition, through 16 s rDNA sequencing, it was found that MPs + CYP led to significant changes in the proportion of dominant phyla. Interestingly, Cetobacterium which increased in CYP and the co-exposure group was positively correlated with most lipid metabolites. Our results suggested that co-exposure to MPs and CYP enhanced the disturbances in hepatic phospholipid metabolism by affecting the gut microbial composition, while these changes were not observed in separate treatment groups. These results emphasized the importance of studying the joint toxicity of MPs and insecticides.

Adsorption of Pb(II) by UV-aged microplastics and cotransport in homogeneous and heterogeneous porous media

To investigate the adsorption effects of aged microplastics (MPs) on Pb(II) and their co-transport properties in homogeneous (quartz sand) and heterogeneous (quartz sand with apple branches biochar) porous media, we explored the co-transport of UV-irradiated aged MPs and coexisting Pb(II) along with their interaction mechanisms. The UV aging process increased the binding sites and electronegativity of the aged MPs' surface, enhancing its adsorption capacity for Pb(II). Aged MPs significantly improved Pb(II) transport through homogeneous media, while Pb(II) hindered the transport of aged MPs by reducing electrostatic repulsion between these particles and the quartz sand. When biochar, with its loose and porous structure, was used as a porous medium, it effectively inhibited the transport capacity of both contaminants. In addition, since the aged MPs cannot penetrate the column, a portion of Pb(II) adsorbed by the aged MPs will be co-deposited with the aged MPs, hindering Pb(II) transport to a greater extent. The transport experiments were simulated and interpreted using two-point kinetic modeling and the DLVO theory. The study results elucidate disparities in the capacity of MPs and aged MPs to transport Pb(II), underscoring the potential of biochar application as an effective strategy to impede the dispersion of composite environmental pollutants.

Effects of microplastics on the environmental behaviors of the herbicide atrazine in soil: Dissipation, adsorption, and bioconcentration

As an emerging contaminant in soil, the impact of microplastics (MPs) on the environmental behavior of other organic pollutants remains uncertain, potentially threatening the sustainability of agricultural production. In this study, the impact of two kinds of MPs on the environmental behaviors of herbicide atrazine in soil-plant system was investigated. The results showed that MPs significantly reduced the half-life 17.69 ∼ 21.86 days of atrazine in the soil, compared to the control group. Meanwhile, the introduction of MPs substantially increased atrazine adsorption. Additionally, MPs substantially enriched the diversity and functionality of soil microbiome, and the soil metabolic activity was stimulated. Regarding the crop growth, the accumulation of atrazine in maize were significantly decreased by approximately 48.4-78.5 % after exposure to MPs. In conclusion, this study reveals the impact of MPs on atrazine's environmental behaviors in soil and highlights their less effect on maize growth, providing valuable insights for managing MPs contamination in sustainable agriculture.

Adsorption-desorption behavior of florpyrauxifen-benzyl on three microplastics in aqueous environment as well as its mechanism and various influencing factors

Microplastics (MPs) and pesticides are two categories contaminants with proposed negative impacts to aqueous ecosystems, and adsorption of pesticides on MPs may result in their long-range transport and compound combination effects. Florpyrauxifen-benzyl, a novel pyridine-2-carboxylate auxin herbicide has been widely used to control weeds in paddy field, but the insights of which are extremely limited. Therefore, adsorption and desorption behaviors of florpyrauxifen-benzyl on polyvinyl chloride (PVC), polyethylene (PE) and disposable face masks (DFMs) in five water environment were investigated. The impacts of various environmental factors on adsorption capacity were evaluated, as well as adsorption mechanisms. The results revealed significant variations in adsorption capacity of florpyrauxifen-benzyl on three MPs, with approximately order of DFMs > PE > PVC. The discrepancy can be attributed to differences in structural and physicochemical properties, as evidenced by various characterization analysis. The kinetics and isotherm of florpyrauxifen-benzyl on three MPs were suitable for different models, wherein physical force predominantly governed adsorption process. Thermodynamic analysis revealed that both high and low temperatures weakened PE and DFMs adsorption, whereas temperature exhibited negligible impact on PVC adsorption. The adsorption capacity was significantly influenced by most environmental factors, particularly pH, cations and coexisting herbicide. This study provides valuable insights into the fate of florpyrauxifen-benzyl in presence of MPs, suggesting that PVC, PE and DFMs can serve as carriers of florpyrauxifen-benzyl in aquatic environment.

Interfacial interactions of polyethylene terephthalate microplastics and malachite green, tetracycline in aqueous environments

Polyethylene terephthalate microplastics (PET-MPs) are one of pivotal nondegradable emerging pollutant. Here the variation of the surface physicochemical characteristics of PET-MPs with UV irradiation aging and the adsorption behaviors of PET-MPs in malachite green (MG), tetracycline (TC) solution and the effect of coexisting Cu(II) were comparatively investigated. The yellowing, weakened hydrophobicity, and increased surface negative charge, crystallinity degree and oxygen-containing functional groups were manifested specifically by the aged PET-MPs. Different from the single system, the hydrophobic interaction and metal ion bridging complexation dominated the adsorption of MG and TC, respectively, in the binary solution. While in the ternary solution, cationic ion competition of Cu(II) with MG decreased its capture, and the formation of PET-Cu(II)-TC ternary complexes promoted TC adsorption. Moreover, PET-MPs could serve as an efficient vector for MG and TC in MG/TC/Cu(II) ternary system, indicating PET-MPs tend to carry more varieties in the complex environment, that may increase the environmental risk of PET-MPs.

Adsorption of azoxystrobin and pyraclostrobin onto degradable and non-degradable microplastics: Performance and mechanism

Microplastics (MPs) exist after agricultural operations and thus present potential hazards to the environment and human health. However, the ecological risks posed by MPs carrying pesticides remain unclear. In this study, the adsorption and desorption behaviors of two pesticides, azoxystrobin and pyraclostrobin, on degradable and non-degradable MPs of poly(butylene adipate-co-terephthalate) (PBAT) and polyethylene (PE) were compared before and after UV aging. Additionally, the bioaccessibility of MPs carrying pesticides within a condition simulating gastrointestinal fluids was evaluated. The results showed that, after UV aging, the adsorption capacity of PBAT for pesticides decreased, while that of PE increased. Moreover, PBAT possessed higher adsorption ability towards both the pesticides due to its higher specific surface area, pore volume, contact angle, and lower crystallinity, as well as stronger van der Waals forces, electrostatic interactions, and hydrogen bonding indicated by theoretical calculation. Bioaccessibility experiments showed that azoxystrobin and pyraclostrobin had a higher risk of desorption from PBAT than PE, which is mainly dependent on the LogKow of pesticides according to the random forest analysis. In brief, the study highlights the potential risks of degradable MPs carrying pesticides to human health and the ecosystem, especially when compared to their non-degradable counterparts, manifesting that the ecological risk posed by degradable MPs should not be ignored.

Effects of Microplastics on the Transport of Soil Dissolved Organic Matter in the Loess Plateau of China

Microplastics (MPs) pollution and dissolved organic matter (DOM) affect soil quality and functions. However, the effect of MPs on DOM and underlying mechanisms have not been clarified, which poses a challenge to maintaining soil health. Under environmentally relevant conditions, we evaluated the major role of polypropylene particles at four micron-level sizes (20, 200, and 500 μm and mixed) in regulating changes in soil DOM content. We found that an increase in soil aeration by medium and high-intensity (>0.5%) MPs may reduce NH4+ leaching by accelerating soil nitrification. However, MPs have a positive effect on soil nutrient retention through the adsorption of PO43- (13.30-34.46%) and NH4+ (9.03-19.65%) and their leached dissolved organic carbon (MP-leached dissolved organic carbon, MP-DOC), thereby maintaining the dynamic balance of soil nutrients. The regulating ion (Ca2+) is also an important competitor in the MP-DOM adsorption system, and changes in its intensity are dynamically involved in the adsorption process. These findings can help predict the response of soil processes, especially nutrient cycling, to persistent anthropogenic stressors, improve risk management policies on MPs, and facilitate the protection of soil health and function, especially in future agricultural contexts.

Occurrence, distribution, and risk assessment of pesticides in surface water and sediment in Jiangsu Province, China

The occurrence and distribution of 157 pesticides were investigated in surface water and sediment in Jiangsu Province, China. Gas chromatography-mass spectrometry was used to analyze and quantify these pesticides, and the risk quotient method was used to evaluate their respective environmental risk. The results showed that 91 pesticides were detected in surface water. The organophosphates (OPPs), fungicides, and amide herbicides were predominant. The total concentration in surface water ranged from 63.7 to 22,463 ng/L, 3.90 to 7262 ng/L, and ND to 34,120 ng/L, respectively. The mean concentration was 3479 ng/L, 1644 ng/L, and 1878 ng/L, respectively. The concentration range of detected pesticides in the Yangtze River Basin was generally lower than that in the Huai River Basin. In sediment samples, a total of 63 pesticides were detected. OPPs and amide herbicides were also ranked highest; the total concentration in sediment samples ranged from 2951 to 47,739 ng/g and 106 to 12,996 ng/g, respectively. And the mean concentrations was 6971 ng/g and 5130 ng/g, respectively. Suqian City had the highest concentration for OPPs and amide herbicides in the Huai River Basin, followed by Huai'an City, while Nanjing City and Yangzhou City ranked highest in the Yangtze River Basin. The spatial distribution of pesticides in Jiangsu Province indicated a concentration significantly higher in the western and northern regions than in the eastern and southern regions, and a concentration generally higher in lakes than in rivers. The risk assessment results showed that OPPs, fungicides, amide herbicides, organochlorines, and triazine herbicides in most surface water samples posed a high risk and had regional pollution characteristics. In sediment samples, organochlorines, carbamates, other herbicides, and other insecticides posed a high risk in northern Jiangsu Province, whereas OPPs, amide herbicides, and triazine herbicides posed high risks everywhere in Jiangsu Province.

Physicochemical and biological changes on naturally aged microplastic surfaces in real environments over 10 months

Microplastics (MPs) undergo aging over time, which can influence their behavior in the environment. While laboratory-simulated studies have investigated MP aging, research on natural aging in various real environments remains limited. This study aims to investigate the physical, chemical and biological changes that occur in five types of MPs after more than 10 months of natural aging in three different real environments: seawater, air and soil. Results are compared with previous laboratory experiments. The surface roughness of all types of aged MPs was found to be higher in seawater than in air and soil, which differed from previous simulated studies that showed the highest roughness in air. All aged MPs exhibited the occurrence of hydroxyl and carbonyl groups due to the oxidation processes. Interestingly, the MPs aged in soil showed the lowest level of these functional groups, while in seawater or air, some MPs demonstrated the highest. This contrasts with previous studies indicating the highest level of oxygen-containing functional groups in aged MPs in air. Bacterial analysis identified fourteen bacterial phyla on the surface of aged MPs in all three real environments, with varying abundance in specific environments. Notably, the composition of bacterial communities in the microplastisphere was determined by the surrounding environments, independent of MP types. Natural aging is more complex than laboratory simulations, and the degree of MP aging increases with the complexity of environmental factors. These findings enhance our understanding of the natural aging of MPs in different real environments.

Sorption behaviour of tebuconazole on microplastics: kinetics, isotherms and influencing factors

Microplastics (MPs) and pesticides are two classes of environmental pollutants and have become global challenges. MPs could adsorb substantial environmental pollutants, which may affect their transportation, distribution and cause combination toxicity. Therefore, the study of sorption properties and mechanisms is the basis of the ecological risk assessment of co-exposure of pesticides and MPs. In this research, typical triazole fungicide tebuconazole (TEB) is selected as a model pollutant, and its sorption behaviour was investigated by kinetic and isotherm models. Meanwhile, a series of environmental influencing factors, like pH, salinity, and metals were conducted. Results showed that the sorption of TEB on MPs could reach equilibrium at 24 h, and the sorption capacity followed the order of PA (polyamide) > PS (polystyrene) > PP (polypropylene). The pseudo-second-order model was the most appropriate model to describe kinetic data, and the Freundlich model was well fit for PA sorption isotherms, in contrast the Langmuir model is better for PP and PS. Additionally, the pH of the solution, salinity, and metals have an important effect on sorption. Combined with Fourier Transform Infrared Spectroscopy and environmental influencing factors, the sorption mechanisms were mainly electrostatic interaction and hydrogen bond for PA and PP, and hydrophobic force, intermolecular force, and electrostatic force for PS, respectively.

Sorption of ionic liquids in soil enriched with polystyrene microplastic reveals independent behavior of cations and anions

Recently, much attention has been focused on the application of the Ionic Liquids (ILs) with herbicidal activity in agriculture. It has been suggested that through the appropriate selection of cations and anions, one can adjust the properties of ILs, particularly the hydrophobicity, solubility, bioavailability, toxicity. In practical agricultural conditions, it will be beneficial to reduce the mobility of herbicidal anions, such as the commonly applied 2,4-dichlorophenoxyacetic acid [2,4-D] in the soil. Furthermore, microplastics are becoming increasingly prevalent in the soil, potentially stimulating herbicidal sorption. Therefore, we investigated whether cations in ILs influence the mobility of anions in OECD soil supplemented with polystyrene microplastic (PS). For this purpose, we used the 2,4-D based ILs consisting of: a hydrophilic choline cation [Chol][2,4-D] and a hydrophobic choline cation with a C12chain [C12Chol][2,4-D]. Characterization of selected micropolystyrene was carried out using the BET sorption-desorption isotherm, particle size distribution and changes in soil sorption parameters such as soil sorption capacity and cation exchange capacity. Based on the batch sorption experiment, the effect of microplastic on the sorption of individual cations and anions in soil contaminated with micropolystyrene was evaluated. The results obtained indicate that the introduction of a 1-10% (w/w) PS resulted in an 18-23% increase of the soil sorption capacity. However, the sorption of both ILs' cations increased only by 3-5%. No sorption of the [2,4-D] anion was noted. This suggests that cations and anions forming ILs, behave independently of each other in the environment. The results indicate the fact that ILs upon introduction into the environment are not a new type of emerging contaminant, but rather a typical mixture of ions. It is worth noting that when analyzing the behavior of ILs in the environment, it is necessary to follow the fate of both cations and anions.

Effects of weathering on the properties and fate of secondary microplastics from a polystyrene single-use cup

In this work, we probed the changes to some physicochemical properties of polystyrene microplastics generated from a disposable cup as a result of UV-weathering, using a range of spectroscopy, microscopy, and profilometry techniques. Thereafter, we aimed to understand how these physicochemical changes affect the microplastic transport potential and contaminant sorption ability in model freshwaters. Exposure to UV led to measured changes in microplastic hydrophobicity (20-23 % decrease), density (3% increase), carbonyl index (up to 746 % increase), and microscale roughness (24-86 % increase). The settling velocity of the microplastics increased by 53 % after weathering which suggests that UV aging can increase microplastic deposition to sediments. This impact of aging was greater than the effect of the water temperature. Weathered microplastics exhibited reduced sorption capacity (up to 52 % decrease) to a model hydrophobic contaminant (triclosan) compared to unaged ones. The adsorption of triclosan to both microplastics was slightly reversible with notable desorption hysteresis. These combined effects of weathering could potentially increase the transport potential while decreasing the contaminant transport abilities of microplastics. This work provides new insights on the sorption capacity and mobility of a secondary microplastic, advances our knowledge about their risks in aquatic environments, and the need to use environmentally relevant microplastics.

Fabrication of β-cyclodextrin-polyacrylamide/covalent organic framework hydrogel at room temperature for the efficient removal of triazole fungicides from environmental water

Triazole is frequently-used fungicide, which can leach into surface water through farmland and cause serious environmental pollution. Continuous exposure to triazole fungicides may cause harm to human health. Herein, β-cyclodextrin-polyacrylamide/covalent organic framework (β-CD-PAAM/TFPB-BD) hydrogel was fabricated at room temperature and used for the efficient removal of triazole fungicides. It displayed a short adsorption equilibrium time (50 min) and a total qe of 79.92 mg g-1. The adsorption process for triazole fungicides on β-CD-PAAM/TFPB-BD hydrogel conforms to the pseudo-second-order kinetic model and Freundlich model. The prepared hydrogel was recyclable and resistant to salt, high temperature, acid, and alkali. The reusability of fabricated sorbent can be achieved (i.e., five extraction cycles) for removal of target fungicides. Moreover, the β-CD-PAAM/TFPB-BD hydrogel was successfully applied to remove triazole fungicides in environmental water with removal efficiency ranging from 79.4% to 99.0%.

Adsorption Behavior of Diclofenac on Polystyrene and Poly(butylene adipate-co-terephthalate) Microplastics: Influencing Factors and Adsorption Mechanism

To unveil the intricacies surrounding the interaction between microplastics (MPs) and pollutants, diligent investigation is warranted to mitigate the environmental perils they pose. This exposition delves into the sorption behavior and mechanism of diclofenac sodium (DCF), a contaminant, upon two distinct materials: polystyrene (PS) and poly(butylene adipate-co-terephthalate) (PBAT). Experimental adsorption endeavors solidify the observation that the adsorption capacity of DCF onto the designated MPs amounts to Q(PBAT) = 9.26 mg g-1 and Q(PS) = 9.03 mg g-1, respectively. An exploration of the factors governing these discrepant adsorption phenomena elucidates the influence of MPs and DCF properties, environmental factors, as well as surfactants. Fitting procedures underscore the suitability of the pseudo-second-order kinetic and Freundlich models in capturing the intricacies of the DCF adsorption process onto MPs, corroborating the notion that the mentioned process is characterized by non-homogeneous chemisorption. Moreover, this inquiry unveils that the primary adsorption mechanisms of DCF upon MPs encompass electrostatic interaction, hydrogen bonding, and halo hydrogen bonding. An additional investigation concerns the impact of commonly encountered surfactants in aqueous environments on the adsorption of DCF onto MPs. The presence of surfactants elicits modifications in the surface charge properties of MPs, consequently influencing their adsorption efficacy vis-à-vis DCF.

Detection of Microplastics Based on a Liquid-Solid Triboelectric Nanogenerator and a Deep Learning Method

Microplastics are sub-millimeter-sized fragments of plastics, which have been found in environments to a great extent. They are relatively new pollutants that are difficult to be degraded. They not only cause irreversible adverse effects on microorganisms, animals, and plants but also enter the human body through the food chain and affect human health. However, due to their small size, variety, and differences in physical and chemical properties of microplastics, traditional detection and identification still face challenges. This work provides a method for detecting and classifying microplastics in liquids using a liquid-solid triboelectric nanogenerator (LS-TENG) in combination with a deep learning model. The experiment showed that the type and content of microplastics in the liquid had a great effect on the contact electrification between the liquid and the perfluoroethylene-propylene copolymer. After adding polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, and polystyrene microplastics to the liquids, it was found that the type and content of different microplastics have a significant impact on the output voltage signal of the LS-TENG sensor. When the mass fraction of microplastics ranged from 0.025 to 0.25 wt %, the voltage output of the LS-TENG sensor had a linear relationship with the mass fraction of microplastics. Therefore, a method for quantitatively detecting the content of microplastics using the LS-TENG sensor has been established. Based on the LS-TENG output voltage signal, a convolutional neural network deep learning model was used to identify different types of labels, and high recognition accuracy was achieved. These are of great significance for expanding the application prospect of LS-TENG and realizing the detection of microplastics in liquids.

Interaction of Microbes with Microplastics and Nanoplastics in the Agroecosystems-Impact on Antimicrobial Resistance

Microplastics (MPs) and nanoplastics (NPs) are hotspots for the exchange of antimicrobial resistance genes (ARGs) between different bacterial taxa in the environment. Propagation of antimicrobial resistance (AMR) is a global public health issue that needs special attention concerning horizontal gene transfer (HGT) under micro-nano plastics (MNPs) pressure. Interactions between MNPs and microbes, or mere persistence of MNPs in the environment (either water or soil), influence microbial gene expressions, affecting autochthonous microbiomes, their resistomes, and the overall ecosystem. The adsorption of a range of co-contaminants on MNPs leads to the increased interaction of pollutants with microbes resulting in changes in AMR, virulence, toxin production, etc. However, accurately estimating the extent of MNP infestation in agroecosystems remains challenging. The main limitation in estimating the level of MNPs contamination in agroecosystems, surface and subsurface waters, or sediments is the lack of standardized protocols for extraction of MPs and analytical detection methods from complex high organic content matrices. Nonetheless, recent advances in MPs detection from complex matrices with high organic matter content are highly promising. This review aims to provide an overview of relevant information available to date and summarize the already existing knowledge about the mechanisms of MNP-microbe interactions including the different factors with influence on HGT and AMR. In-depth knowledge of the enhanced ARGs propagation in the environment under the influence of MNPs could raise the needed awareness, about future consequences and emergence of multidrug-resistant bacteria.

Effects of neonicotinoid insecticides on transport of non-degradable agricultural film microplastics

Mulch film microplastics (MPs) could act as a vector for agricultural chemicals due to their long-term presence in farmland environments. As a result, this study focuses on the adsorption mechanism of three neonicotinoids on two typical agricultural film MPs, polyethylene (PE) and polypropylene (PP), as well as the effects of neonicotinoids on the MPs transport in quartz sand saturated porous media. The findings revealed that the adsorption of neonicotinoids on PE and PP was a combination of physical and chemical processes, including hydrophobic, electrostatic and hydrogen bonding. Acidity and appropriate ionic strength (IS) were favorable conditions for neonicotinoid adsorption of on MPs. The results of column experiments showed that the presence of neonicotinoids, particularly at low concentrations (0.5 mmol L^-1), could promote the transport of PE and PP in the column by improving the electrostatic interaction and hydrophilic repulsion of particles. The neonicotinoids would be adsorbed on MPs through hydrophobic action preferentially, whereas excessive neonicotinoids could cover the hydrophilic functional groups on the surface of MPs. Neonicotinoids reduced the response of PE and PP transport behavior to pH changes. 0.005 mol L^-1 NaCl ameliorated the migration of MPs by increasing their stability. Because of its highest hydration ability and the bridging effect of Mg²⁺, Na⁺ had the most prominent transport promoting effect on PE and PP in MPs-neonicotinoid. This study shows that the increased environmental risk caused by the coexistence of microplastic particles and agricultural chemicals is unneglectable.

Microplaastics as potential bisphenol carriers: role of adsorbents, adsorbates, and environmental factors

Microplastics (MPs) are widely found in the environment and can act as carriers for various toxic substances, promoting their diffusion and bioenrichment. Accordingly, it is necessary to investigate the transfer of MPs between the environment and organisms. This study investigated the adsorption potential of four types of MPs, namely polystyrene (PS), polypropylene (PP), polyamide (PA), and polyvinyl chloride (PVC), for bisphenol (BP) A, B, F, and S (BPA, BPB, BPF, and BPS, respectively). The results showed that all four types of MP could act as environmental carriers of BP. PA had the highest BPA adsorption capability, with a value of 109.0 ± 39.93 μg·g^-1, followed by PS (89.24 ± 26.12 μg·g^-1), PVC (53.08 ± 15.32 μg·g^-1), and PP (41.83 ± 11.51 μg·g^-1).Thepolymer type, SSA, and surface functional groups were the main factors affecting the BP adsorption capacity of MPs. The concentration, hydrophobicity, and dissociation ability of BPs also substantially affected their adsorption behavior. The adsorption efficiency of different BPs on the same MPs ranged from 37.4 ± 3.7% to 59.1 ± 2.8%. The adsorption capacity of BPs on MPs decreased with increasing temperature. Salt ions in the solution significantly enhanced BP partitioning in the solid phase owing to the salting-out effect. Additionally, the adsorption of BPs on MPs was pH dependent. Higher pH values increased electrostatic repulsion, which decreased the adsorption capacity. These results demonstrate that MPs can serve as BP carriers in the environment and their potential BP loads might be considerably greater than that of BP additives used during plastic production.

Experiments and simulation of adsorption characteristics of typical neonicotinoids in urban stream sediments

Sediment adsorption is one of the main environmental fates of neonicotinoids (NEOs) in aquatic environments. Little information is available on for the adsorption characteristics of NEOs on urban stream sediments. In this study, urban tidal stream sediments were collected to determine the adsorption properties of four selected NEOs. The influence of environmental factors on NEO adsorption was determined by the RSM-CCD method. The NEO adsorption rates on sediments were established by multiple regression equations. As a result, the adsorption of four NEOs onto sediments fitted a linear isotherm model. The adsorption amounts of thiacloprid (THA), clothianidin (CLO), acetamiprid (ACE), and imidacloprid (IMI) were 1.68 to 2.24, 1.71 to 2.89, 1.88 to 3.07, and 2.23 to 3.16 mg/kg, respectively. The adsorption processes of four NEOs on urban sediments were favorable. Moreover, adsorption behaviors of NEOs were typical physical adsorption and readily adsorbed onto urban sediments. The adsorption processes of NEOs were exothermic reactions, and their adsorption rates decreased with increasing pH. Flow rates and organic matter contents could promote the adsorption ratios of typical NEOs. Multiple linear regression was used to assess the relationships between the adsorption rates of NEOs and environmental factors. The p-values of the fitting equations of adsorption rates were all less than 0.05. Within the ranges of concentration of the investigated factors, the multiple regression equations were able to reasonably model and predict the sorption of typical NEOs onto urban stream sediments. Therefore, the adsorption rate equations effectively predicted the NEO adsorption performance of urban streams and were helpful for controlling risk assessment of NEOs.

Study of feeding biology and diet-associated microplastic contamination in selected creek fishes of northeastern Arabian Sea: A multi-species approach

This study investigated the diet composition and microplastic contamination in six fish species collected from the creek area of northeastern Arabian Sea. The results show that the diet of the fish is mainly composed of shrimps, algae, fish, and zooplankton, with microplastics constituting up to 4.83 % (Index of Preponderance) of their diet. The average abundance of microplastics ranges from 5.82 to 7.69 items per fish, and their ingestion is influenced by seasonal variation, gut fullness, and trophic level. Microplastic contamination has no significant effect on the condition factor and hepatosomatic index of the fish species. However, polymer hazard index indicates that microplastic pollution in fish is associated with a low to high risk factor, which might cause potential harm to aquatic lives and higher vertebrates via food chain. Therefore, this study highlights the need for immediate attention and effective regulations to reduce microplastic pollution to protect marine life.

Spatiotemporal distribution patterns and ecological risk of multi-pesticide residues in the surface water of a typical agriculture area in China

This study systematically investigated the occurrence, spatiotemporal distribution, and ecological risk of 106 pesticides in the surface water of the Jiaodong Peninsula in China. The results show that 52 pesticides, including 21 insecticides, 10 fungicides, and 21 herbicides, were detectable in the surface water. The concentrations of target pesticides in water samples ranged from 0.42 (tebuconazole in the wet season) to 645.31 ng/L (thiamethoxam in the normal season). The two most polluting and widespread pesticides were quintozene (maximum concentration of 481.46 ng/L and detection rate of 94 %) and atrazine (maximum concentration of 465.73 ng/L and detection rate of 100 %). The total pesticide concentrations in surface water in different seasons revealed the order of dry season > wet season > normal season. Based on aquatic pesticide concentrations, their frequency of occurrence, and effect concentrations, insecticides posed higher risks to aquatic organisms and human health than either fungicides or herbicides. Total pesticide concentrations were significantly positively correlated with suspended particulate matter, dissolved organic carbon, soil pH, normalized difference vegetation index, adjacent cropland area; and were negatively associated with adjacent grassland area. The cropland area largely influences pesticide distribution in the surface water of the Jiaodong Peninsula.

Effects of microplastics and cadmium on the soil-wheat system as single and combined contaminants

Two types of microplastics (MPs) (micro polyethylene (mPE) and micro polypropylene (mPP)) were studied alongside and cadmium (Cd) to determine how they affected soil-wheat systems, both individually and in mixed combinations. This was accomplished by carrying out a pot experiment to reveal their respective interaction effects. Results showed that in different Cd pollution levels soils (0, 1, and 5 mg kg^-1), chlorophyll concentrations in wheat leaves decreased markedly with rising levels of mPE/mPP. In the single mPE treatment, as the mPE content in the soil increased, the aboveground and root biomass improved. By contrast, in the single mPP treatment, when the mPP content was low, the aboveground biomass of wheat increased and with the mPP content increased, the aboveground biomass of wheat decreased. This result was also shown in the combined contamination of mPE/mPP and Cd (1 mg kg^-1) in the root biomass. With an increase in Cd concentration (that is, at 5 mg kg^-1) in the combined contamination, this phenomenon continued in the aboveground biomass while in the roots, there was a promotion effect. At Cd contaminated soil (1 mg kg^-1), MPs inhibited Cd enrichment in aboveground wheat, but at 5 mg kg^-1, Cd enrichment was promoted instead, in both aboveground and roots. Adding mPE/mPP diminished pH and the Cd effective state concentration in soil. The combined contamination of mPE/mPP and Cd affected the Cd biological enrichment in the wheat to some extent, which was influenced by the types of MP and pollution levels of Cd in the soil.

Molecular level insight into the different interaction intensity between microplastics and aromatic hydrocarbon in pure water and seawater

The interaction of MPs and aromatic hydrocarbons in seawater and pure water was examined using experimental measurements, molecular dynamics (MD) simulations, and density functional theory (DFT) calculations in light of the potential health risks posed by microplastic (MPs)-associated aromatic hydrocarbon pollutants. Isothermal studies and MD simulations suggested that MPs have a stronger affinity for aromatic hydrocarbons in seawater. To uncover the mechanism, MPs' surface characteristics and their intermolecular interactions with aromatic hydrocarbons were examined. According to the research, MPs in seawater have less compact structure, bigger pores, and a higher specific surface area, all of which contribute to more sorption sites. Analysis of the intermolecular interaction indicated that MPs have a greater ability for molecular interactions in seawater and the interaction energy between MPs and aromatic hydrocarbons in seawater is higher. Additionally, seawater cations may act as bridges, which also accelerate sorption in seawater. In summary, this study provides a molecular-level understanding of MPs-aromatic hydrocarbons interaction and demonstrates that the interaction is stronger in seawater.

Sorption kinetics, isotherms and molecular dynamics simulation of 17β-estradiol onto microplastics

Microplastic is a new type of pollutant, which can act as a carrier for organic contaminants. It affects the migration and bioavailability of chemicals and potentially threatens the ecology. This work investigated the adsorption kinetics, isotherm and influencing factors of 17β-estradiol (E2) on three dominate microplastics. Then, used molecular dynamics (MD) simulation to analyze the adsorption mechanism. The results showed that E2 adsorption onto microplastics conformed well to the Pseudo-second-order kinetics and Redlich-Petersen isotherm model. The adsorption capacity of E2 on microplastics was polyethylene (PE) > polypropylene (PP) > polystyrene (PS). The small particle size of microplastics was conducive to the adsorption due to its large specific surface area. The thermodynamic parameters demonstrated the adsorption of E2 was a spontaneous and exothermic process, so low temperature was benefit for the adsorption. The MD simulation results indicated the adsorption of E2 on MPs belonged to surface adsorption. The order of E2 adsorption energy by three microplastics obtained by molecular dynamics simulation is consistent with the experimental results. This work may help to understand the molecular adsorption process and provide a theoretical basis for the combined ecotoxicity of microplastics.

Microplastics in wastewater treatment plants: Sources, properties, removal efficiency, removal mechanisms, and interactions with pollutants

Since wastewater treatment plants (WWTPs) cannot completely remove microplastics (MPs) from wastewater, WWTPs are responsible for the release of millions of MPs into the environment even in 1 day. Therefore, knowing the sources, properties, removal efficiencies and removal mechanisms of MPs in WWTPs is of great importance for the management of MPs. In this paper, firstly the sources of MPs in WWTPs and the quantities and properties (polymer type, shape, size, and color) of MPs in influents, effluents, and sludges of WWTPs are presented. Following this, the MP removal efficiency of different treatment units (primary settling, flotation, biological treatment, secondary settling, filtration-based treatment technologies, and coagulation) in WWTPs is discussed. In the next section, details about MP removal mechanisms in critical treatment units (settling and flotation tanks, bioreactors, sand filters, membrane filters, and coagulation units) in WWTPs are given. In the last section, the mechanisms and factors that are effective in adsorbing organic-inorganic pollutants in wastewater to MPs are presented. Finally, the current situation and research gap in these areas are identified and suggestions are provided for topics that need further research in the future.

Influence of ultraviolet-aging and adsorbed pollutants on toxicological effects of polyvinyl chloride microplastics to zebrafish

Microplastics (MPs) undergo various aging processes and interact with diverse pollutants in the environment. In the present study, we investigated the influence of ultraviolet (UV) aging on the adsorption of organic pollutants by polyvinyl chloride microplastics (mPVC) and explored toxicity variations among pristine, aged, and pollutant-loaded mPVCs to zebrafish. Irradiation of UV for 30 d significantly changed the physiochemical properties of mPVC, leading to more oxygen-containing groups and free radicals (¹O₂, ·O₂^-, and ·OH) on mPVC surfaces. The aging process reduced the adsorption of mPVC against a hydrophobic compound chlorpyrifos (CPF) but enhanced the adsorption against a moderately hydrophilic compound erythromycin (ERY). Ingestion of CPF- and ERY-loaded mPVCs resulted in bioaccumulation of the two compounds in zebrafish, suggesting a carrier effect of mPVCs. In toxicity tests, the aged mPVC caused severer gut damages, stronger oxidative stresses, and greater interference with the gut microbiota in zebrafish than the pristine mPVC. The CPF and ERY-loaded mPVCs produced lower oxidative stresses in zebrafish than mPVCs alone, due to fewer radicals on mPVC surfaces after the adsorption of organic contaminants. Notably, the CPF and ERY-loaded mPVCs presented greater effects on fish swimming behaviors and gut microbial compositions, which was associated with the released CPF and ERY from mPVCs within the zebrafish. Overall, the present study demonstrated significant influences of UV-aging and the adsorbed pollutants on the toxicological effects of MPs and highlighted the necessity to perform toxicity studies of MPs using more environmentally relevant MPs.

Adsorption of Diclofenac Sodium by Aged Degradable and Non-Degradable Microplastics: Environmental Effects, Adsorption Mechanisms

Microplastics (MPs) are novel pollutants, which can carry toxic contaminants and are released in biota and accumulate. The adsorption behavior of MPs and aged MPs has attracted extensive attention. In this paper, the aging process of polystyrene (PS) and poly (butyleneadipate-co-terephthalate) (PBAT) plastics under ultraviolet (UV) irradiation at a high temperature and their adsorption properties for the contaminant diclofenac sodium (DCF) before and after aging was investigated. There are many factors affecting the adsorption capacity of MPs. In this experiment, three aspects of MPs, organic pollutants, and environmental factors are explored. The Freundlich model as well as the pseudosecondary kinetic model is more applicable to the process of DCF adsorption by MPs. The main effects of adsorption of organic pollutants by MPs are electrostatic interactions, hydrogen-halogen bonds, and hydrophobic interactions. The adsorption capacity of the UV-aged MPs on DCF is significantly enhanced, and the order of adsorption capacity is Q(A-PBAT) (27.65 mg/g) > Q (A-PS) (23.91 mg/g) > Q (PBAT) (9.30 mg/g) > Q (PS) (9.21 mg/g). The results show that more active sites are generated on the surface of MPs after aging, which can enhance their adsorption capacity for organic pollutants. This adsorption mechanism will increase their role as contaminant carriers in the aquatic food chain.

Anti-Fungal Activity of Moutan cortex Extracts against Rice Sheath Blight (Rhizoctonia solani) and Its Action on the Pathogen's Cell Membrane

Rice sheath blight (RSB) caused by Rhizoctonia solani is one of the most destructive diseases of rice (Oryza sativa). Although chemical fungicides are the most important control methods, their long-term unreasonable application has brought about problems such as environmental pollution, food risks, and non-target poisoning. Therefore, considering the extraction of fungistatic substances from plants may be an alternative in the future. In this study, we found that the Moutan cortex ethanol extract has excellent antifungal activity against R. solani, with a 100% inhibition rate at 1000 μg/mL, which aroused our great exploration interest. In-depth exploration found that the antifungal active ingredients of M. cortex were mainly concentrated in the petroleum ether extract of the M. cortex ethanol extract, which still maintained a 100% inhibition rate with 250 μg/mL, and its effective medium concentration (EC₅₀) was 145.33 μg/mL against R. solani. Through the measurement of extracellular relative conductivity and OD₂₆₀, the petroleum ether extract induced leakage of intracellular electrolytes and nucleic acids, indicating that the cell membrane was ruined. Therefore, we preliminarily determined that the cell membrane may be the target of the petroleum ether extract. Moreover, we found that petroleum ether extract reduced the content of ergosterol, a component of the cell membrane, which may be one of the reasons for the cell membrane destruction. Furthermore, the increase of MDA content would lead to membrane lipid peroxidation, further aggravating membrane damage, resulting in increased membrane permeability. Also, the destruction of the cell membrane was observed by the phenomenon of the mycelium being transparent and broken. In conclusion, this is the first report of the M. cortex petroleum ether extract exhibiting excellent antifungal activity against R. solani. The effect of the M. cortex petroleum ether extract on R. solani may be on the cell membrane, inducing the disorder of intracellular substances and metabolism, which may be one of the antifungal mechanisms against R. solani.

Adsorption of flupyradifurone onto soils: kinetics, isotherms, and influencing factors

The study of the adsorption properties of pesticides in soil is essential to assessing the risk of their pollution of nearby aquatic environments. To reveal the adsorption mechanisms of flupyradifurone (FPO) on soil, batch experiments in five different soils were carried out in this study. The adsorption kinetics and isotherms of FPO in five soils were well fitted by using several models (R² = 0.922-0.998). It was found that both physical and chemical adsorption were included in the adsorption process of FPO in soils; the monolayer adsorption of FPO occurred with a non-uniform energy distribution on the soil surface, and the internal particle diffusion was not the only rate-controlling step. The adsorption coefficients calculated by using the Langmuir (K_L) and Freundlich (K_F) models were 0.0158-0.0982 and 1.053-9.798, respectively. In addition, the main factors affecting the adsorption of FPO in soil were investigated by stepwise regression fitted with the adsorption coefficient (K_d) and the soil properties. It was found that the organic carbon content was the main factor (R² = 0.857, p < 0.05). Therefore, the organic carbon adsorption coefficients (K_oc) were calculated. The results (1.0532-5.6529) indicated that FPO has a low affinity and high mobility in the soils, and may cause water environment pollution around the soil. Therefore, FPO should be used cautiously in paddy fields. These research findings were important for elucidating the sorption behaviour and transport of FPO in soil.

Adsorption behavior of azole fungicides on polystyrene and polyethylene microplastics

Agricultural plastic films and triazole fungicides are widely used in agricultural production process. Exposure to natural environment, agricultural plastic films will degrade into micron plastic particles, which will adsorb pesticide molecules and may affect their toxicity, biological activity and persistence. The long-term coexistence of microplastics (MPs) and triazole fungicides will bring potential harms to the agricultural ecological environment. Therefore, two kinds of triazole fungicides flusilazole (FLU) and epoxiconazole (EPO) were selected as cases and the adsorption behaviors of them on polystyrene and polyethylene were investigated. A series of factors which could affect the adsorption behavior were evaluated. Specifically, the particle size of MPs could affect its adsorption capacity, and the smaller the particle size, the stronger the adsorption capacity. Moreover, with the increase of pH value from 6.0 to 9.0, the adsorption capacity of MPs to target compounds gradually increased. The effect of ionic strength was evaluated by NaCl, and 0.05% of NaCl was beneficial to the adsorption process, while the continuous increase of NaCl concentration inhibited the adsorption. Oxalic acid and humic acid decreased the adsorption capacity of flusilazole on PE by 15.99-32.00% and PS by 35.02-48.67%, respectively. In addition, compared with the single pesticide system, the adsorption capacity of MPs for flusilazole and epoxiconazole in the binary pesticides system decreased by 36.13-37.93% and 44.36-51.35%, respectively, indicating that competitive adsorption occurred between the two pesticides. Meanwhile, the adsorption process was evaluated by adsorption kinetics and adsorption isotherms and were consistent with pseudo-second-order kinetic model and Freundlich isotherm model, respectively. Finally, several characterization analyses were conducted to investigated the adsorption mechanism, and hydrogen, halogen bonding and hydrophobic interaction proved to play an important role. The study on the adsorption behavior and mechanism of pesticide on MPs was the basis of assessing the risk of joint exposure.

The impact of chlorination on the tetracycline sorption behavior of microplastics in aqueous solution

Considering the large volumes of treated water and incomplete elimination of pollutants, wastewater treatment plants (WWTPs) remain a considerable source of microplastics (MPs). Chlorine, the most frequently used disinfectant in WWTPs, has a strong oxidizing impact on MPs. However, little is documented, to date, about the impact of chlorination on the transformation of MPs and the subsequent environmental behaviors of the chlorinated MPs when released into the aquatic environment. This study explored the response of the physicochemical properties of specific thermoplastics, namely polyurethane (TPU) MPs and polystyrene (PS) MPs, to chlorination and their emerging pollutant [tetracycline (TC)] adsorption behavior in aqueous solution. The results indicated that the O/C ratio of the MP surface did not significantly change, and that there were increases in the O-containing functional groups of the TPU and PS MPs, after chlorination. The surface area of the chlorinated TPU MPs increased by 45 %, and that of the chlorinated PS increased by 21 %, compared with the pristine ones, which contributed to the TC adsorption. The adsorption isotherm fitting parameters suggested that the chlorinated TPU fitted the multilayer adsorption, and the chlorinated PS was inclined to the monolayer adsorption. The relative abundance of the O-containing functional groups, on the TPU surface, led to the release of CHCl₃ molecules, and the clear surface irregularities and fissures occurred after chlorine treatment. No fissures were found on the surface of the chlorinated PS MPs. The hydrophobicity and electrostatic adsorption were proved to be the major impacts on the TC adsorption of the chlorinated MPs, and the subsequently formed hydrogen bonds led to the stronger adsorption capacity of the chlorinated TPU than the chlorinated PS MPs.

Effects of Weathering on Microplastic Dispersibility and Pollutant Uptake Capacity

Microplastics are ubiquitous in the environment, leading to a new form of plastic pollution crisis, which has reached an alarming level worldwide. Micron and nanoscale plastics may get integrated into ecological cycles with detrimental effects on various ecosystems. Commodity plastics are widely considered to be chemically inert, and alterations in their surface properties due to environmental weathering are often overlooked. This lack of knowledge on the dynamic changes in the surface chemistry and properties of (micro)plastics has impeded their life-cycle analysis and prediction of their fate in the environment. Through simulated weathering experiments, we delineate the role of sunlight in modifying the physicochemical properties of microplastics. Within 10 days of accelerated weathering, microplastics become dramatically more dispersible in the water column and can more than double the surface uptake of common chemical pollutants, such as malachite green and lead ions. The study provides the basis for identifying the elusive link between the surface properties of microplastics and their fate in the environment.

Microplastics mulch film affects the environmental behavior of adsorption and degradation of pesticide residues in soil

Plastic pollution in the soil ecosystem is currently receiving worldwide attention. However, little is known whether the presence of microplastics (MPs) in soil will affect the environmental behavior of pesticide residues in soil. Here, the effect of the addition of new mulch MPs (New-MPs), aged mulch MPs (Aged-MPs) and biodegradable mulch MPs (BioD-MPs) on the adsorption and degradation behaviors of two pesticides (imidacloprid and flumioxazin) in soil was investigated. Three MPs slowed down rapid adsorption stage of pesticides in soil and delayed the time to reach adsorption equilibrium. Adsorption rates: Soil > Soil + New-MPs > Soil + Aged-MPs > Soil + BioD-MPs. Three MPs enhanced the adsorption strength of the soil system for the two pesticides, and the aging treatment of the MPs enhanced this effect. Three MPs affected the degradation process of the two pesticides. New-MPs promoted the degradation of two pesticides imidacloprid and flumioxazin, and the degradation half-lives were shortened to 0.93 and 0.85 times, respectively; while Aged-Mps and BioD-MPs delayed the degradation process of two pesticides, and the degradation half-lives were extended to 1.64 times and 1.21 times, respectively. The effect was more significant with the increase of MPs and pesticides concentration. Pesticide polarity, surface structure and functional groups of MPs are potentially important reasons for the differences in adsorption and degradation of MPs-soil systems. Our findings provide a deep insight into understanding the mechanism of interaction between MPs and pesticide residues in soil environment.

The effects of polyethersulfone and Nylon 6 micromembrane filters on the pyraclostrobin detection: adsorption performance and mechanism

Adsorption of test substances on micromembrane filters during sample pretreatment before qualitative and quantitative analysis has greatly affected the accuracy of the measurement. In the present study, it was found that the adsorption rate of pyraclostrobin reached 77.7-100% when water samples of pyraclostrobin (1 mL) were filtered with polyethersulfone (PES) and Nylon 6 filters. Therefore, the adsorption mechanisms were investigated from the kinetics, isotherms, and thermodynamics of the pyraclostrobin adsorption process, combined with attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) analysis. The results showed that PES accorded with second-order adsorption kinetics and Nylon 6 with first-order adsorption kinetics, and the correlation coefficient R² was 0.98. The adsorption behavior of the two micromembranes followed the linear isothermal model, indicating that the adsorption process was through monolayer adsorption. Thermodynamic study showed that the adsorption of pyracoethyl on PES membrane was spontaneous endothermic, while that on Nylon 6 was spontaneous exothermic. The π-π electron-donor-acceptor (EDA) between pyraclostrobin and PES may promote the adsorption of PES to pyraclostrobin, and hydrogen bonding between pyraclostrobin and Nylon 6 micromembrane may be involved in the adsorption. Our study also proved that the adding 60% methanol and iodine solution (2 mmol/L) was an effective strategy to reduce the adsorption effects and to increase the accuracy of the detection.

Alkaline aging significantly affects Mn(II) adsorption capacity of polypropylene microplastics in water environments: Critical roles of natural organic matter and colloidal particles

Most microplastic particles may undergo various aging in water environments. In this work, surface physicochemical properties were firstly compared among pristine polypropylene (PP-pris) microplastics, and two aged ones obtained after pretreated with HCl (PP-acid) and NaOH (PP-alka). When compared with PP-pris and PP-acid, PP-alka had a much stronger Mn(II) adsorption capacity. The results regarding the role of natural organic matter and colloidal particle concentrations on adsorption demonstrated that for water solutions either containing kaolin or not, humic acid (HA) had significantly negative influence on Mn(II) adsorption capacity of PP-alka due to their complexation and competition effects, and its negative influence became enhanced with increasing kaolin concentrations. Besides, established conceptual models of adsorption were applied to comprehensively explore adsorption mechanisms of PP-alka for Mn(II) in the coexistence of HA and kaolin. An important suggestion was that in complicated adsorption-reactor system, great numbers of microplastics-kaolin heteroaggregates might be formed via ion bridging of Mn(II) and/or polymer bridging of HA. So these formed aggregates were possible to re-organize themselves, under pre-set vibration-speed conditions, for achieving a more stable structure. As a consequence, Mn(II) adsorption behaviors would be affected by changes in steric-hindrance effects of HA molecules and surface charge distribution of resultant heteroaggregates.

Competition adsorption of malachite green and rhodamine B on polyethylene and polyvinyl chloride microplastics in aqueous environment

Microplastics (MPs) will cause compound pollution by combining with organic pollutants in the aqueous environment. It is important for environmental protection to study the adsorption mechanism of different MPs for pollutants. In this study, the adsorption behaviors of malachite green (MG) and rhodamine B (RhB) on polyethylene (PE) and polyvinyl chloride (PVC) were studied in single systems and binary systems, separately. The results show that in single system, the adsorptions of between MPs for pollutants (MG and RhB) are more consistent with the pseudo-second-order kinetics and Freundlich isotherm model, the adsorption capacity of both MPs for MG is greater than that of RhB. The adsorption capacities of MG and RhB were 7.68 mg/g and 2.83 mg/g for PVC, 4.52 mg/g and 1.27 mg/g for PE. In the binary system, there exist competitive adsorption between MG and RhB on MPs. And the adsorption capacities of PVC for the two dyes are stronger than those of PE. This is attributed to the strong halogen-hydrogen bond between the two dyes and PVC, and the larger specific surface area of PVC. This study revealed the interaction and competitive adsorption mechanism between binary dyes and MPs, which is of great significance for understanding the interactions between dyes and MPs in the multi-component systems.

A comparative study on the adsorption behavior and mechanism of pesticides on agricultural film microplastics and straw degradation products

Straw will degrade into segment, powder and crystalline cellulose, while the agricultural film will degrade into microplastics (MPs) in farmland soils. The specific surface area of these micro-particles increases and many new functional groups are formed in the degradation process, which can be a good vector of pesticides. To more accurately and truly analyze the risk of main imported substances and their degradation products against pollutants in soil, the adsorption behavior and mechanism of four commonly used pesticides on aged polyethylene microplastics (APE), wheat straw segment (WSS), wheat straw powder (WSP), and straw crystalline cellulose (SCC) were analyzed and compared through batch adsorption experiments and infrared spectrum. The adsorption kinetics of four pesticides on MPs and straw degradation products tended to be pseudo-second-order kinetics; the adsorption isotherms of pesticides on APE and SCC tended to fit the Freundlich model, while on WSP and WSS tended to fit the Langmuir model. The adsorption was a spontaneous endothermic increase process, suggesting that the main adsorption force of pesticides on MPs and straw degradation products was hydrophobic diffusion. The adsorption of pesticides against WSP and WSS still had a certain π-π conjugation and electrostatic interaction. And the adsorption amount on the straw degradation products followed the order of WSP > WSS > APE > SCC, presumably related to the specific surface area and pore volume of the adsorbent. As WSP, WSS could adsorb more pesticides, the straw returning to the field can be used for slow-release of pesticides to reduce the dosage of pesticides.