Mutual effects of U(VI) and Eu(III) immobilization on interpenetrating 3-dimensional MnO2/graphene oxide composites

The efficient uptake of uranium by amine-functionalized β-cyclodextrin supported fly ash composite from polluted water

A novel polyethyleneimine/polydopamine-functionalized β-cyclodextrin supported fly ash adsorbent (PEI/PDA/β-CD/FA) had been synthesized to uptake uranium from polluted water. At pH = 5.0 and T = 298 K, the uranium uptake efficiency and capacity of PEI/PDA/β-CD/FA reached to 98.7 % and 622.8 mg/g, respectively, which were much higher than those of FA (71.4 % and 206.7 mg/g).The excellent uranium uptake properties of PEI/PDA/β-CD/FA could be explained by three points: (1) using β-CD as a supporting material could effectively avoid the aggregation of FA and improve the hydrophily of FA; (2) the unique cavity structure of β-CD could form chelates with uranyl ions; (3) the formation of PEI/PDA co-deposition coating on FA further enhanced the affinity of FA to UO22+. With the presence of interfering ions, the uptake efficiency of PEI/PDA/β-CD/FA for uranium was still up to 94.5 % after five cycles, indicating the high selectively and recoverability of PEI/PDA/β-CD/FA. In terms of the results of characterizations, uranium was captured by PEI/PDA/β-CD/FA via electrostatic attraction, hydrogen bond, coordination and complexation. To sum up, PEI/PDA/β-CD/FA was expected to be used for actual sewage treatment owing to its excellent uranium uptake efficiency/capacity, selectivity, cycle stability and feasibility of actual application.

Synthesis and fabrication of segregative and durable MnO2@chitosan composite aerogel beads for uranium(VI) removal from wastewater

To address the imperative need for efficient removal of uranium-containing wastewater and mitigate radioactive contamination risks associated with nuclear energy, the development of materials with high removal efficiency and facile separation is crucial. This study designed and synthesised MnO2@chitosan (CTS) composite aerogel beads by in-situ growing δ-MnO2 on porous CTS aerogel beads. This approach not only mitigates the agglomeration of MnO2 nanospheres but also significantly enhances the porous structure and surface area of MnO2@CTS. These cost-effective and eco-friendly millimeter-scale spherical aerogels exhibited convenient separation properties after adsorption. These characteristics help mitigate the risk of equipment seam blockage and secondary pollution that are often associated with powdered adsorbents. Additionally, MnO2@CTS exhibited remarkable mechanical strength (stress approximately 0.55 MPa at 60 % strain), enabling rapid separation and easy regeneration while maintaining high adsorption performance even after five cycles. Significantly, MnO2@CTS exhibited a maximum adsorption capacity of 410.7 mg/g at pH 6 and 298 K, surpassing reported values for most CTS/MnO2-based adsorbents. The chemisorption process of U(VI) on MnO2@CTS followed the pseudo-second-order kinetic and Dubinin-Radushkevish models. X-ray photoelectron spectroscopy analysis further confirmed the reduction of U(VI) to U(V/IV). These findings highlight the substantial potential of MnO2@CTS aerogel beads for U(VI) removal from aqueous solutions, positioning them as a promising solution for addressing U(VI) contamination in wastewater.

Efficient separation of uranium(VI) from aqueous solution using magnetic Co/Al layered double oxides coated with carbon dots

Herein, magnetic layered double oxides coated with carbon dots (MLCs) were synthesized through introducing sodium dodecylbenzene sulfonate and FeCl2 into Co/Al LDH for capturing uranium from aqueous solution. When the molar ratio of Co to Al was 4 : 1, the MLC composite possessed the strongest affinity to uranium(VI) in solution with short equilibrium time (<160 min), high adsorption efficiency (94.31%) and large removal capacity (513.85 mg g-1). The adsorption behavior of MLCs for uranium(VI) was well fitted with Langmuir and pseudo-second-order models, suggesting that the monolayer chemical adsorption was the rate-limiting step. Besides, MLC-3 could be reused by using 0.15 mol L-1 ethylene diamine tetraacetic acid as an eluent and the removal percentage still remained at a high level (>83.3%) after 5 adsorption/desorption cycles. Redox reaction, chemical complexation and electrostatic attraction were proved to play significant roles in uranium(VI) separation. Therefore, MLC-3 could be used as a potential adsorbent in uranium(VI)-containing wastewater treatment due to its excellent adsorption performance for uranium(VI).

Magnetite/β-cyclodextrin/fly ash composite as an effective and recyclable adsorbent for uranium(VI) capture from wastewater

As a novel adsorbent for the separation of uranium(VI) from wastewater, Magnetite/β-cyclodextrin/fly ash composite (Fe₃O₄/β-CD/FA) was first prepared via a chemical coprecipitation technology. The characterization results indicated that Fe₃O₄ and β-CD had been successfully loaded on FA, which had brought abundant oxygen-containing functional groups, providing numerous adsorptive sites for the removal of uranium(VI). At pH = 5.0 and T = 25 °C, the maximum uranium(VI) removal efficiency and capacity of Fe₃O₄/β-CD/FA were higher to 97.8% and 444.4 mg g^-1, respectively. Pseudo-second-order and Langmuir models fitted better with the experimental data, illustrating that chemical adsorption dominated the uranium(VI) removal process. In addition, Fe₃O₄/β-CD/FA showed good anti-interference ability and recoverability. After five cycles, the removal rate of uranium(VI) on Fe₃O₄/β-CD/FA was still higher to 90.4%. The immobilization of uranium(VI) on Fe₃O₄/β-CD/FA was mainly ascribed to the synergism of redox reaction, complex reaction, chemical reaction and electrostatic interaction. Given the above, Fe₃O₄/β-CD/FA would be regarded as an efficacious, green and promising adsorbent for uranium(VI) separation from wastewater.

Mussel inspired synthesis of polydopamine/polyethyleneimine-grafted fly ash composite adsorbent for the effective separation of U(VI)

Polydopamine/polyethyleneimine-grafted fly ash composite (PDA/PEI/FA), an efficient multifunctional adsorbent for U(VI) with excellent separation efficiency (94.5 %) and capacity (422.5 mg/g), was synthesized by grafting PDA and PEI on FA via Mussel inspiration and Michael addition reaction. The introduction of PDA and PEI had brought numerous functional groups with fine affinities to uranium, like catechol, amino and imino, causing good U(VI) separation performances. Langmuir and Pseudo-second-order models were well matched with experimental data, illustrating the U(VI) separation on PDA/PEI/FA was a homogeneous chemical adsorption process. After five cycles, the U(VI) adsorption efficiency for PDA/PEI/FA was still up to 90.2 %, implying that PDA/PEI/FA possessed good stability and reusability. Besides, the good dynamic adsorption performances of PDA/PEI/FA further demonstrated that PDA/PEI/FA was an ideal adsorbent for the practical wastewater treatment. According to the characterization results, U(VI) was absorbed by PAD/PEI/FA through complexation, redox reaction, electrostatic attraction and hydrogen bonding. Given the above, PDA/PEI/FA showed good practical application prospect in U(VI) separation.

New insight into enhanced transport of multi-component porous covalent-organic polymers with alkyl chains as injection agents for levofloxacin removal in saturated sand columns

Levofloxacin (LEV) is prone to be retained in aquifers due to its strong adsorption affinity onto sand, thus posing a threat to groundwater quality. In-situ injection technology for remediating LEV-contaminated soil and groundwater is still challenging owing to the lack of appropriate remedial agents. Herein, two novel multi-component porous covalent-organic polymers (namely, SLEL-1 and SLEL-2) with alkyl chains were constructed through Schiff-base reactions to adsorb LEV from an aqueous solution, in which the kinetics, isotherms, influenced factors were investigated. Plausible adsorption mechanisms were proposed through characterization and experimental analysis, including pore filling effect, π-π electron-donor-acceptor (EDA) interaction, hydrogen bonding force, hydrophobic-hydrophobic interaction as well as electrostatic force. In addition, response surface methodology (RSM) revealed the treatment optimization and reciprocal relationship within multi-variables. Furthermore, taking advantage of favorable dispersion and outstanding competitive behavior, SLEL-1 was established as an in-situ adsorptive agent in dynamic saturated columns on a laboratory scale to investigate the removal of LEV from water-bearing stratum. Overall, the findings of this work provided an insight into the fabrication of SLELs as long-term mobile and reusable adsorptive agents for practical in-situ applications in the future.

Preparation of Graphene Oxide-Maghemite-Chitosan Composites for the Adsorption of Europium Ions from Aqueous Solutions

The adsorption of Eu(III) on composites synthesised from graphene oxide (GO), maghemite (MGH), and chitosan (CS) has been studied using different approaches. The physicochemical and morphological characteristics of the composites GO-MGH, GO-CS, GO-MGH-CS I, II, and III were determined by XRD, Mössbauer spectroscopy, FTIR, Raman spectroscopy, and TEM. According to the results of batch experiments, the maximum experimental adsorption capacity was 52, 54, 25, 103, and 102 mg/g for GO-MGH, GO-CS, GO-MGH-CS I, II, and III, respectively. The data obtained are in better agreement with the Langmuir, pseudo-second-order, and pseudo-first-order models only for GO-MGH. Thus, the adsorption of Eu(III) on the composites was a favourable, monolayer, and occurred at homogeneous sites. The nature of adsorption is chemical and, in the case of GO-MGH, physical. Tests of the composites in natural waters showed a high removal efficiency for Eu(III), Pu(IV), and Am(III), ranging from 74 to 100%. The ANFIS model has quite good predictive ability, as shown by the values for R², MSE, SSE, and ARE. The GO-MGH-CS composites with the high adsorption capacity could be promising candidates for the removal of Eu(III) and the pre-concentration of Pu(IV) and Am(III) from natural waters.

Comprehensive evaluation of cobalt incorporated cryptomelane-type manganese oxide molecular sieve as an efficient adsorbent for enhanced removal of europium from wastewater systems

Extraction of radionuclide contaminants from wastewater systems has recently drawn widespread attention, and then developing a novel and green extracting technology has also become an enormous challenge. Herein, a facile hydrothermal method was employed to fabricate cobalt-incorporated cryptomelane-type manganese oxide molecular sieve (Co-OMS-2) for extraction Eu(III) from wastewater under diverse experimental conditions. All kinds of characterized techniques, such as SEM, TEM, XRD, FTIR, BET, EDS and XPS had verified the qualified synthesis process and splendid structural features of the Co-OMS-2. The maximum adsorption capacity of Co-OMS-2 was 7.62 × 10^-4 mol/g for Eu(III) at 298 K, which was superior than primarily traditional materials reported previous literatures. The high adsorption capacity of Eu(III) onto Co-OMS-2 was primarily attributed to high specific surface area and abundant surface functional groups, and the interactions were mainly contributed to strong surface complexation and electrostatic attraction. Under the condition of low pH, the outer-sphere surface complexation and cation exchange were primary mechanisms to Eu(III) adsorption onto Co-OMS-2 composites, while inner-sphere surface complexation was mainly assigned to Eu(III) adsorption onto Co-OMS-2 under the high pH sections. The Co-OMS-2 composite achieved equilibrium in a relatively short time, and this excellent performance was conducive to the treatment of Eu(III) under the extreme emergency conditions. In view of the extraordinary adsorption capacity and recycled reusability, the Co-OMS-2 composites can be as prospective adsorbents adopted for the extraction of Eu(III) in real wastewater management.

Highly efficient adsorptive extraction of uranium from wastewater by novel kaolin aerogel

An environment-friendly, low-cost and efficient kaolin aerogel adsorbent (named as KLA) was synthesized via a freeze-drying-calcination method to solve the defect of low uranium removal rate for kaolin (KL). The removal rate of uranium on KLA reached 90.6 %, which was much higher than that of KL (69.2 %) (C₀ = 10 mg L^-1, t = 24 h, pH = 5.0, T = 298 K and m/V = 1.0 g L^-1). The uranium removal behavior on KLA was satisfied with Pseudo-second-order and Langmuir model, which meant that the uranium ions were immobilized on the surface of KLA via chemical reaction. Meanwhile, high temperature was in favor of the removal of uranium on KLA, indicating that the removal process was a spontaneous endothermic reaction. Compared with KL, KLA also presented better cycle ability and its removal rate of uranium was up to 80.5 % after three cycles, which was still higher than that of KL at the first cycle (74.5 %). On basis of the results of SEM, XRD, FT-IR and XPS, it could be concluded that uranium ions were adsorbed by KLA via complexation. Hence, KLA could be regarded as a feasible candidate for the removal of uranium from aqueous solution.

Explorations on efficient extraction of uranium with porous coal fly ash aerogels

In order to explore a suitable uranium adsorbent with the advantages of low-cost, recyclability and high efficiency, porous coal fly ash aerogels with different size of coal fly ash were synthesized. Among them, PCFAA-1250 (prepared with 1250 mesh coal fly ash (CFA)) showed better adsorption performance and the maximum adsorption efficiency even approached 96.5% (C₀ = 10 mg L^-1, m/V = 1.0 g L^-1, T = 298 K, t = 24 h and pH = 3.0), which was higher than most of previous adsorbents. Langmuir and pseudo-second-order models were more likely to be used to determine the removal behavior of uranium on PCFAA, illustrating that the adsorption reaction was uniform chemisorption. Meanwhile, the adsorption process on PCFAA was spontaneous. Notably, the desorption efficiencies of all of PCFAA were more than 80% after five cycles, which suggested that PCFAA possessed good recyclability, especially PCFAA-1250. Besides, the adsorption mechanism was further revealed via XPS and the uranium ions were immobilized on the surface of adsorbents through complexation. Based on above conclusions, it could be concluded that PCFAA-1250 had the potential to be a candidate for the extraction of uranium from wastewater.

A critical review of uranium contamination in groundwater: Treatment and sludge disposal

Dissolved uranium in groundwater at high concentrations is an emerging global threat to human and ecological health due to its radioactivity and chemical toxicity. Uranium can enter groundwater by geochemical reactions, natural deposition from minerals, mining, uranium ore processing, and spent fuel disposal. Although much progress has been made in uranium remediation in recent years, most published reviews on uranium treatment have focused on specific methods, particularly adsorption. This article systematically reviews the major treatment technologies, explains their mechanism and progress of uranium removal, and compares their performance under various environmental conditions. Of all treatment methods, adsorption has received much attention due to its ease of use and adaptability under various conditions. However, salinity and competition from other ions limit its application in actual field conditions. Biosorption and bioremediation are also promising methods due to their low-cost and chemical-free operation. Strong base anion exchange resins are more effective at typical groundwater pH conditions. Advanced oxidation processes like photocatalysis produce less sludge and are effective even at low uranium concentrations. Electrocoagulation shows significantly improved performance when organic ligands are added prior to treatment. The significant advantages of membrane filtration are high removal efficiency and the ability to recover uranium. While each technology has its merits and demerits, no single technology is entirely suitable under all conditions. One major area of concern with all technologies is the need to dispose of liquid and solid waste generated after treatment safely. Future research must focus on developing hybrid and state-of-the-art technologies for effective and sustainable uranium removal from groundwater. Developing holistic management strategies for uranium removal will hinge on understanding its speciation, mechanisms of fate and transport, and socio-economic conditions of the affected areas.

Novel benzylphosphate-based covalent porous organic polymers for the effective capture of rare earth elements from aqueous solutions

It has been a major challenge to develop stable and cost-effective porous materials that efficiently recover heavy rare earth elements (HREEs) due to ever-increasing demand, low availability and high cost of HREEs. This study presents two novel benzylphosphate-based covalent porous organic polymers (BPOP-1 and BPOP-2) that were prepared by facile one-pot Friedel-Crafts reactions. Various analytical techniques are used to investigate the successful syntheses of BPOP materials and establish their material properties, which include an unusual crystalline nature, large surface area, hierarchical pore structure, and superior chemical stabilities. The BPOPs effectively adsorb, and thus remove HREEs from aqueous media. In particular, BPOP-1 had higher phosphate content and exhibits superior adsorption capacities (Eu³⁺: 289.5; Gd³⁺: 292.7; Tb³⁺: 294.4; Dy³⁺: 301.9 mg/g) than BPOP-2, while BPOP-2 had higher mesoporosity and correspondingly supports faster adsorption kinetics. Remarkably, both BPOP materials exhibit some of the highest HREE adsorption capacities reported to date, the selective capture of Dy³⁺ ions, and excellent cyclic adsorption/desorption properties. We provide a potential adsorption mechanism for Dy³⁺ capture by the BPOP adsorbent. These demonstrate that introducing phosphate functionality into a robust porous polymer backbone with high surface area is a promising strategy for selective HREEs capture from wastewater.

Graphene-based materials for the adsorptive removal of uranium in aqueous solutions

Ground water contamination by radioactive elements has become a critical issue that can pose significant threats to human health. Adsorption is the most promising approach for the removal of radioactive elements owing to its simplicity, effectiveness, and easy operation. Among the plethora of functional adsorbents, graphene oxide and its derivatives are recognized for their excellent potential as adsorbent with the unique 2D structure, high surface area, and intercalated functional groups. To learn more about their practical applicability, the procedures involved in their preparation and functionalization are described with the microscopic removal mechanism by GO functionalities across varying solution pH. The performance of these adsorbents is assessed further in terms of the basic performance metrics such as partition coefficient. Overall, this article is expected to provide valuable insights into the current status of graphene-based adsorbents developed for uranium removal with a guidance for the future directions in this research field.

High effective enrichment of U(VI) from aqueous solutions on versatile crystalline carbohydrate polymer-functionalized graphene oxide

The removal of uranium on various sorbents has been widely employed in recent times. However, the limited sorption capacities of these sorbents inhibit the actual application of the radionuclide in actual environments. The development of a novel material with high sorption capacity and superior regeneration for the removal of uranium is highly desirable. Therefore, a versatile class of crystalline carbohydrate polymers (COF) was prepared from organic compounds. Moreover, COF-functionalized graphene oxide (COF/GO) was synthesized and tested for the removal of U(VI) from aqueous solutions. The batch characterization showed that COF was vertically oriented on the surface of GO using diboronic acid as nucleation sites. The maximum removal capacity of U(VI) on COF/GO reached 117.67 mg g-1, and was attributed to a huge void ratio and various oxygen-bearing functional groups. In addition, the inner-sphere surface-complexation dominated the U(VI) removal, and the adsorption mechanism of inner-sphere surface-complexation was transferred into surface precipitation with increasing reaction time. COF/GO can be converted into conductive carbon and reduced GO (C/rGO) nanocomposite, which has high specific capacitance. These results suggested that GO-based materials can be considered as promising candidates for the enrichment of U(VI) and energy storage.

Uranium uptake from wastewater by the novel MnxTi1-xOy composite materials: Performance and mechanism

The novel Mn_xTi_1-xO_y composite materials with different mole ratios (Mn to Ti = 3:7, 5:5 and 7:3) were prepared to remove uranium species from wastewater. These composite materials were characterized by various techniques, such as thermogravimetric analysis (TG), X-ray diffraction (XRD), Fourier transformed infrared (FT-IR) and scanning electron microscopy (SEM). It was found that the chitosan in Mn_xTi_1-x-Chi were completely removed after calcination at 650 °C and Mn_xTi_1-xO_y composites possessed uniform distribution of the porous structure as well as plentiful hydroxyl-containing groups. Moreover, the as-prepared Mn_xTi_1-xO_y composite materials were applied to remove uranium from solution to evaluate the adsorption performance. It was found that the Mn_0.5Ti_0.5O_y possessed relatively excellent uptake performance for uranium comparing with the Mn_0.3Ti_0.7O_y and Mn_0.7Ti_0.3O_y and its maximum uptake capacity and efficiency reach 695.2 mg/g and 98.6% (pH = 4, m/V = 0.1 g/L, T = 298 K), respectively, which were much superior than most of reported materials based on titanium oxide or manganese oxide. Besides, the uranium uptake on Mn_0.5Ti_0.5O_y was independent on ionic strength and it had considerable reusability, which might be the necessary condition for Mn_0.5Ti_0.5O_y to be applied in uranium uptake from uranium-containing wastewater. As a candidate adsorbent, Mn_0.5Ti_0.5O_y possessed a high potentiality to remove uranium from wastewater.

Metal oxide aerogels: Preparation and application for the uranium removal from aqueous solution

The low density CeO₂, Pr₂O₃ and Nd₂O₃ aerogels were synthesized by a novel solution-freeze-drying-calcination route. The bulk densities of the CeO₂, Pr₂O₃ and Nd₂O₃ aerogels were calculated to be 8.10, 10.67 and 9.80 mg/cm³, respectively. Moreover, the structure of metal oxide aerogels was similar due to the same template materials, which made them possible to be appealing materials for adsorption. The maximum adsorption capacity for U(VI) of the CeO₂, Pr₂O₃ and Nd₂O₃ aerogels reached 481.5, 840.6 and 587.3 mg/g (pH = 7, T = 25 °C), respectively, which were much higher than most of other modified metal oxides. Moreover, at low concentration of U(VI) (5 mg/L), it was completely dislodged by CeO₂ aerogel and the remaining U(VI) was below 0.006 mg/L, which was lower than the effluent standards of United States Environmental Protection Agency and World Health Organization. Besides, after five cycles, the adsorption efficiency of metal oxide aerogels almost remained at a high level. Due to the excellent adsorption performance and high reusability, the three metal oxide aerogels would be promising adsorbents for the removal of U(VI).

Synthesis of potential Ca-Mg-Al layered double hydroxides coated graphene oxide composites for simultaneous uptake of europium and fulvic acid from wastewater systems

High background electrolyte and natural organic matter are favorable to migration of hazardous radionuclides in geochemical repository. Herein, Ca-Mg-Al layered double hydroxide coated onto graphene oxide (Ca-Mg-Al LDH/GO) composites were successfully synthesized, characterized and adopted to decontaminate Eu(III) and fulvic acid (FA) under diverse experimental conditions. Diverse concentration gradients and different addition sequences on Eu(III) and FA were also obtained, which revealed different interaction mechanisms. The experimental results displayed that the coexistence of FA and Eu(III) respectively promoted adsorption performance of Eu(III) and FA under the ternary systems. The acquired Ca-Mg-Al LDH/GO composites were adopted to remove Eu(III) and FA, which further illustrated excellent chemo-physical stability and adsorption capacity of 1.12 × 10^-3 mol/g and 3.54 × 10^-4 mol/g, respectively. The remarkable adsorption performances of Ca-Mg-Al LDH/GO were confirmed through kinetic procedures and depending-temperature isotherms, illustrating that the kinetics processes were simulated using pseudo-second-order pattern, and the adsorption isotherms were splendidly simulated using Langmuir pattern. XPS spectrum analysis revealed that these containing oxygen groups took significant part in the restricting of Eu(III) and FA onto the surfaces of Ca-Mg-Al LDH/GO composites. In view of experimental results, the Ca-Mg-Al LDH/GO composites can be as potential adsorbents with availably recycled reusability for the decontamination of Eu(III) and FA from nuclear fuel partition or nuclear wastewater systems.

Construction of Core-Shell MOFs@COF Hybrids as a Platform for the Removal of UO22+ and Eu3+ Ions from Solution

The binary nanocomposites of metal/covalent-organic frameworks (NH₂-MIL-125(Ti)@TpPa-1) were constructed by solvothermal method, which was developed as a multifunctional platform with adsorption and photocatalysis for radionuclides removal. The batch experiments and physicochemical property (FT-IR, XRD, SEM, TEM, XPS, etc.) corroborated: (i) core-shell NH₂-MIL-125(Ti)@TpPa-1 had a more stable, multilayer pore structure and abundant active functional groups; (ii) NH₂-MIL-125(Ti)@TpPa-1 had fast a removal rate, as well as a high adsorption capacity of 536.73 mg (UO₂²⁺)/g and 593.97 mg (Eu³⁺)/g; (iii) the pseudo-second-order and Langmuir model provided a more reasonable description, indicating the immobilization process was endothermic, spontaneous chemisorption; (iv) the adsorption mechanism was chelation and electrostatic attraction, ascribed to the nitrogen/oxygen-containing functional groups. These results illustrated that NH₂-MIL-125(Ti)@TpPa-1 was a prospective adsorbent for the remediation polluted by radionuclides. In addition, the research provided the theoretical basis for further investigation on the UO₂²⁺(VI) photoreduction.

Three dimensional graphene materials doped with heteroatoms for extraction and adsorption of environmental pollutants in wastewater

Environmental pollution by heavy metal ions, organic pollutants, oils, pesticides or dyes is a ubiquitous problem adversely affecting human health and environmental ecology. Development and application novel adsorbents in full-scale treatment systems with effectiveness properties could effective ways to facilitate the extraction and adsorption of environment pollutants from wastewater. Graphene materials have drawn much attention due to their extraordinary electron mobilities, high surface areas, good thermal conductivities, and excellent mechanical properties. Three-dimensional graphene materials can provide the inherent advantages of 2D graphene sheets and exhibit micro/nanoporous structures, increased specific surface areas, high electron conductivities, fast mass transport kinetics, and strong mechanical strength. Potential applications for 3D graphene materials include environmental remediation, chemical and biological sensing, catalysis, and super capacitors. Recent advances in the applications of 3D functionalized graphene materials (3D FGMs) doped with heteroatoms for the extraction and adsorption of environmental pollutants in wastewater are summarized in this review.

Epoxy graphene oxide from a simple photo-Fenton reaction and its hybrid with phytic acid for enhancing U(VI) capture

A novel approach to synthesize phytic acid (PA) functionalized graphene oxide (P-pFGO-7) treated by the photo-Fenton reaction has been designed, which has been used as an adsorbent for efficient capture of U(VI) from aqueous solution. The structure and morphology of P-pFGO-7 were characterized well. The adsorption property for P-pFGO-7 was comprehensively assessed by batch experiments, showing the high adsorption capacity (266.7 mg/g, at pH = 4.0, T = 298 K), fast adsorption kinetics (~10 min), good selectivity for U(VI) and Ln-An ions in various coexisting ions and excellent regeneration capacity. With the assistance of various characterization techniques and batch adsorption results, it is found that PA makes the most contribution to coordinate U(VI) heavily depending on the PO moiety. P-pFGO-7 could be regenerated by 0.1 mol/L Na₂CO₃ with ~95% desorption efficiency and reused well after five recycles. This present work provides a feasible route to modify graphene oxide and extend PA for potentially practical application in the removal of U(VI) from radioactive wastewater.

Interaction of U(vi) with α-MnO2@layered double hydroxides by combined batch experiments and spectroscopy studies

Uranium is of high concern in the field of environmental remediation because of its high fluidity, radioactivity, biological toxicity and long life. Removing U(vi) from wastewater is of great significance to both environment and biology.