Adsorption of Cr(VI) from aqueous solutions using novel activated carbon spheres derived from glucose and sodium dodecylbenzene sulfonate

Preparation of porous biochar from fusarium wilt-infected banana straw for remediation of cadmium pollution in water bodies

The problem of cadmium pollution and its control is becoming increasingly severe issue in the world. Banana straw is an abundant bio raw material, but its burning or discarding in field not only causes pollution but also spreads fusarium wilt. The objective of this paper is to utilize biochar derived from the wilt-infected banana straw for remediation of Cd(II) pollution while to eliminate the pathogen. The activity of wilt pathogen in biochar was determined by PDA petri dish test. The Cd(II) adsorption of the biochar was determined by batch adsorption experiments. The effects of KOH concentration (0.25, 0.5 and 0.75 M) on the physicochemical characteristics of the biochar were also observed by BET, SEM, FTIR, XRD and XPS. Results showed that pristine banana straw biochar (PBBC) did not harbor any pathogen. The specific surface area (SSA) and Cd(II) adsorption capacity of 0.75 M KOH modified banana straw biochar (MBBC0.75M) were increased by 247.2% and 46.1% compared to that of PBBC, respectively. Cd(II) adsorption by MBBC0.75M was suitable to be described by the pseudo-second-order kinetic model and Freundlich isotherm. After Cd(II) adsorption, the CdCO3 were confirmed by XRD and observed through SEM. The weakness and shift of oxygen-containing functional groups in MBBC0.75M after Cd(II) adsorption implied that those groups were complexed with Cd(II). The results showed that pyrolysis could not only eliminate banana fusarium wilt, but also prepare porous biochar with the wilt-infected banana straw. The porous biochar possessed the potential to adsorb Cd(II) pollutants.

Adsorption performance and kinetics of Cr(VI) onto activated carbons derived from the waste leaves of invasive plants Rhus typhina and Amorpha fruticosa

To maximize the potential of biomass from invasive plants, waste leaves from Rhus typhina (RT) and Amorpha fruticosa (AF) were used to prepare activated carbons (ACs) for the efficient removal of chromium from wastewater. Six ACs were prepared by CO2 activation at 850 °C with varying flow rates (500, 1000, and 1500 mL/min) and characterized by yield, pH, N2 adsorption isotherm, FTIR, SEM, TG, and XPS. The adsorption isotherm and kinetics for chromium removal were analyzed. The outcomes showed that the ACs had mesoporous structures with specific surface areas of 408.05-701.01 m2/g and pore volumes of 0.360-0.653 cm3/g. The pores are distributed among the agglomerated nanoparticles on the surface of the granules. The existence of two kinds of chromium compounds and two valance states, Cr(III) and Cr(VI), in spent ACs was identified by the FTIR and XPS spectra. The Cr (VI) equilibrium data and adsorption kinetics were well-fit with the Langmuir isotherm (R2 = 0.936-0.967) and pseudo-second-order kinetic models (R2 = 0.795-0.937). The maximum Langmuir Cr adsorption capacities of ACRT1.0 and ACAF0.5 were estimated to be 266.54 and 255.21 mg/g at pH = 2.0, respectively. Concentrations of Cr(III) and Cr(VI) in filtrates after equilibrium, combined with XPS and TGA analysis of spent ACs, illustrated that Cr(VI) was converted to the less harmful trivalent chromate Cr(III) during the adsorption processes. Cr(III) and Cr(VI) probably formed compounds with carbon and nitrogen atoms on the surfaces of ACs. ACs with abundant surface N-H groups achieved high Cr adsorption performance. The waste leaves from these invasive plants are suitable for producing cost-effective and efficient ACs for removing Cr (VI) from water by chemical adsorption.

Rapid photocatalytic reduction of hexavalent chromium over Z-scheme MgIn2S4/BiPO4 heterojunction: Performance, DFT calculation and mechanism insight

The accumulation of highly fluid and biotoxic hexavalent chromium (Cr(VI)) impairs water ecosystems. It is urgent to quickly reduce Cr (VI) to trivalent chromium (Cr (III)) in wastewater. Hereby, Z-scheme MgIn₂S₄/BiPO₄ heterojunction was prepared, and MB-30 (mass ratio of BiPO₄ to composite) presented a rapid Cr(VI) (10 mg L^-1) removal efficiency of 100% within 10 min, its kinetic rate constant was 9.0 and 30.1 folds that of MgIn₂S₄ and BiPO₄, respectively. After four rounds, MB-30 maintained a high removal rate of 93.18% and stabilized crystal texture. First-principles calculations revealed that the formation of Z-scheme heterojunction could ameliorate charge generation, detachment, migration capability, and light utilization. Meanwhile, the coupling of S and O in the two components produced a tight S-O bond, which acted as an atomic-level access to promote carrier migration. The findings were consistent with the structure superiority and optical and electronic properties of MB-30. The Z-scheme pattern was substantiated based on multifarious experiments, which exhibited an elevated reduction potential while emphasizing the significance of interfacial chemical bond and the internal electric field (IEF) on carrier detachment and migration.

Enhanced Chromium (VI) Adsorption onto Waste Pomegranate-Peel-Derived Biochar for Wastewater Treatment: Performance and Mechanism

Surface chemical modification allows for the rational construction of biochar with desirable structures and functionalities for environment purification. Fruit-peel-derived adsorbing material has been well studied in the adsorption of heavy-metal removal due to its abundance and non-toxicity, but its precise mechanism in removing chromium-containing pollutants remains unclear. Herein, we explored the potential application of engineered biochar prepared from fruit waste via chemical modification to remove chromium (Cr) from an aqueous solution. By synthesizing two types of agricultural residue-derived adsorbents, including pomegranate peel adsorbent (PG) and its modified product, pomegranate-peel-derived biochar (PG-B), via chemical and thermal decomposition methods, we elucidated the adsorption property of Cr(VI) on the studied materials and identified the cation retention mechanism of the adsorption process. Batch experiments and varied characterizations demonstrated that superior activity was exhibited in PG-B, which can contribute to the porous surfaces caused by pyrolysis and effective active sites resulting from alkalization. The highest Cr(VI) adsorption capacity is obtained at pH 4, a dosage of 6.25 g L^-1, and a contact time of 30 min. The maximum adsorption efficiency of 90.50% in a short period (30 min) was obtained on PG-B, while PG reached a removal performance of 78.01% at 60 min. The results from kinetic and isotherm models suggested that monolayer chemisorption dominated the adsorption process. The Langmuir maximum adsorption capacity is 16.23 mg g^-1. This study shortened the adsorption equilibrium time of pomegranate-based biosorbents and presents positive significance in designing and optimizing waste fruit-peel-derived adsorption materials for water purification.

New Porous Carbon Material Derived from Carbon Microspheres Assembled in Hollow Carbon Spheres and Its Application to Toluene Adsorption

In this paper, a new porous carbon material adsorbent was prepared using carbon microspheres assembled in hollow carbon spheres (HCS) with a hydrothermal method. Transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and Raman spectroscopy were used to characterize the adsorbents. It was found that the diameter of carbon microspheres derived from 0.1 mol/L glucose was about 130 nm, which could be inserted inside HCS (pore size was 370-450 nm). The increase in glucose concentration would promote the diameter of carbon microspheres (CSs), and coarse CSs could not be loaded in the mesopores or macropores of HCS. Thus, the C_0.1@HCS adsorbent had the highest Brunauer-Emmett-Teller surface area (1945 m²/g) and total pore volume (1.627 cm³/g). At the same time, C_0.1@HCS posed a suitable ratio of micropores and mesopores, which could provide adsorption sites and volatile organic compound diffusion channels. Moreover, oxygen-containing functional groups -OH and C═O in CSs were also introduced into HCS, and the adsorption capacity and regenerability performance of the adsorbents were improved. The dynamic adsorption capacity of C_0.1@HCS for toluene reached 813 mg/g, and the Bangham model was more suitable for describing the toluene adsorption process. The adsorption capacity was stably kept above 770 mg/g after eight adsorption-desorption cycles.

Performance and mechanism of starch-based porous carbon capture of Cr(VI) from water

Cr(VI) pollution has seriously affected the survival of biological organisms and humans, so reducing the harm of Cr(VI) pollution is a significant scientific goal. Natural starch exhibits a low adsorption capacity for Cr(VI); thus, physical or chemical modification is needed to improve the adsorption and regeneration performance of starch. In this study, a novel starch-based porous carbon (SPC) was prepared to remove Cr(VI) from water by using soluble starch as a raw material. The characterization results show that the SPC shows a ratio surface area of 1325.39 m²/g. Kinetics suggest that the adsorption of Cr(VI) on SPC is dominated by chemisorption. The isotherm data demonstrated that the adsorption of Cr(VI) by SPC adhered to the Freundlich model. SPC exhibits a multimolecular layer adsorption structure, and the highest amount of adsorbed Cr(VI) in SPC was 777.89 mg/g (25 °C). Ion competition experiments show that SPC exhibits significant selectivity for Cr(VI) adsorption. In addition, the adsorption cycle experiment shows that SPC maintains a 63 % removal rate after 7 cycles. In this study, starch was transformed into high-quality adsorbent materials by hydrothermal and activation strategies, offering a new innovation for the optimization of starch-based adsorbents.

Asymmetric Alternative Current Electrochemical Method Coupled with Amidoxime-Functionalized Carbon Felt Electrode for Fast and Efficient Removal of Hexavalent Chromium from Wastewater

A large amount of Cr (VI)-polluted wastewater produced in electroplating, dyeing and tanning industries seriously threatens water ecological security and human health. Due to the lack of high-performance electrodes and the coulomb repulsion between hexavalent chromium anion and cathode, the traditional DC-mediated electrochemical remediation technology possesses low Cr (VI) removal efficiency. Herein, by modifying commercial carbon felt (O-CF) with amidoxime groups, amidoxime-functionalized carbon felt electrodes (Ami-CF) with high adsorption affinity for Cr (VI) were prepared. Based on Ami-CF, an electrochemical flow-through system powered by asymmetric AC was constructed. The mechanism and influencing factors of efficient removal of Cr (VI) contaminated wastewater by an asymmetric AC electrochemical method coupling Ami-CF were studied. Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) characterization results showed that Ami-CF was successfully and uniformly loaded with amidoxime functional groups, and the adsorption capacity of Cr (VI) was more than 100 times higher than that of O-CF. In particular, the Coulomb repulsion effect and the side reaction of electrolytic water splitting were inhibited by the high-frequency anode and cathode switching (asymmetric AC), the mass transfer rate of Cr (VI) from electrode solution was increased, the reduction efficiency of Cr (VI) to Cr (III) was significantly promoted and a highly efficient removal of Cr (VI) was achieved. Under optimal operating conditions (positive bias 1 V, negative bias 2.5 V, duty ratio 20%, frequency 400 Hz, solution pH = 2), the asymmetric AC electrochemistry based on Ami-CF can achieve fast (30 s) and efficient removal (>99.11%) for 0.5-100 mg·L^-1 Cr (VI) with a high flux of 300 L h^-1 m^-2. At the same time, the durability test verified the sustainability of the AC electrochemical method. For Cr (VI)-polluted wastewater with an initial concentration of 50 mg·L^-1, the effluent concentration could still reach drinking water grade (<0.05 mg·L^-1) after 10 cycling experiments. This study provides an innovative approach for the rapid, green and efficient removal of Cr (VI) containing wastewater at low and medium concentrations.

Optimization of Cr (VI) removal from aqueous solution with activated carbon derived from Eichhornia crassipes under response surface methodology

Tannery industries' effluent contains a high concentration of Cr (VI) which has the potential to affect the environment and public health. Therefore, this study aimed to investigate the optimization of Cr (VI) adsorption by activated carbon (AC) derived from Eichhornia crassipes from an aqueous solution. The adsorbent was activated with dilute sulfuric acid followed by thermal activation. AC was characterized using proximate analysis, SEM, FTIR, X-ray diffraction, and the BET method. The Cr (VI) removal optimization process was performed using a central composite design under the response surface methodology. The proximate analysis showed that the moisture content, volatile matter, ash content, and fixed carbon of the activated carbon were 5.6%, 18.2%, 14.4%, and 61.8% respectively. The surface areas of the Eichhornia crassipes before activation, after activation, and after adsorption were 60.6 g/m², 794.2 g/m², and 412.6 g/m² respectively. A highly porous structure with heterogeneous and irregular shapes was observed in the SEM micrograph. In the FTIR analysis, different peaks are indicated with various functional groups. The intensity of XRD peaks decreased as 2 theta values increased, which indicates the presence of an amorphous carbon arrangement. The point of zero charge (pH_pzc) of the activated carbon was found to be 5.20. A maximum Cr (VI) removal of 98.4% was achieved at pH 5, contact time 90 min, adsorbent dose 2 g, and initial Cr (VI) concentration of 2.25 mg/L. Statistically significant interactions (P < 0.05) were observed between the initial Cr (VI) concentration and adsorbent dose as well as the initial Cr (VI) concentration and contact time. Langmuir adsorption isotherm fitted the experimental data best, with an R² value of 0.99. The separation constant (RL) indicates that the adsorption process is favorable. The kinetic experimental data were best fitted with the pseudo-second-order model with an R² value of 0.99 whereas the adsorption rate is controlled by intraparticle and extragranular diffusion processes. Generally, the AC has the potential to be a strong adsorbent candidate for wastewater treatment at the industrial level.

Flexible and easy-handling pristine polypyrrole membranes with bayberry-like vesicle structure for enhanced Cr(VI) removal from aqueous solution

Polypyrrole has been extensively explored for Cr(VI) removal from wastewater towing to the advantages of superior performance, low cost, facile synthesis, and high environmental stability. However, the unsatisfactory adsorption capacity and complicated process of adsorbent separation from aqueous solutions remain a huge challenge, limiting its practical application. Herein, a flexible PPy membrane with bayberry-like vesicle structures (PPy-B) was prepared via template-assisted interfacial polymerization. It was found that sodium sulfosalicylate not only improved the flexibility and strength of the PPy-B membrane for easy-handling but also participated in the polymerization of PPy as a dopant to improve the specific surface area and doping level for increasing adsorption sites. Benefiting from these, the easy-handling PPy-B membrane exhibited a high adsorption capacity (586.90-682.50 mg/g at 298-318 K), a high reusability (five adsorption-desorption cycles), and a high ultimate adsorption capacity after adsorption-desorption cycles until membrane failure (1174.86 mg/g at 298 K). The proposed mechanisms of the enhanced Cr(VI) removal involve electrostatic adsorption, reduction, and ion exchange. This flexible PPy membrane therefore shows attractive advantages in wastewater treatment.

Chitosan-based composite microspheres for treatment of hexavalent chromium and EBBR from aqueous solution

Hexavalent chromium is widely used in industrial fields, but its pollution has posed a great threat to the environment due to its high toxicity. We created a chitosan-based microsphere biosorbent (CP) by combining polyethyleneimine with chitosan adopting inverse emulsion polymerization method. Under the optimal conditions (pH = 3), the maximum adsorption capacity of composite microspheres can reach 299.89 mg g^-1, which is much higher than that of chitosan microspheres (168.91 mg g^-1). When the amount of CP is 0.25 g L^-1, the removal rate of 50 mg L^-1 Cr(VI) and 50 mg L^-1 Eriochrome blue-black R (EBBR) can reach 95% and 99%, respectively. The time required for CP to reach adsorption equilibrium (180 min) was significantly shorter than that of chitosan microspheres (540 min), and the adsorption rate was significantly improved. Langmuir isotherm model, pseudo-second-order kinetic model and thermodynamic calculation results penetrated an endothermic spontaneous, monolayer, and chemical adsorption process. Biomass composite microspheres CP has obvious selectivity and the adsorption capacity retention rate of CP was still 71.32% after four adsorption cycles. This work proposed an easily prepared and biomass-based microspheres for the effective removal of Cr(VI) in printing and dyeing wastewater pollution through adsorption.

Removal of hexavalent chromium via biochar-based adsorbents: State-of-the-art, challenges, and future perspectives

Chromium originates from geogenic and extensive anthropogenic activities and significantly impacts natural ecosystems and human health. Various methods have been applied to remove hexavalent chromium (Cr(VI)) from aquatic environmental matrices, including adsorption via different adsorbents, which is considered to be the most common and low-cost approach. Biochar materials have been recognized as renewable carbon sorbents, pyrolyzed from various biomass at different temperatures under limited/no oxygen conditions for heavy metals remediation. This review summarizes the sources, chemical speciation & toxicity of Cr(VI) ions, and raw and modified biochar applications for Cr(VI) remediation from various contaminated matrices. Mechanistic understanding of Cr(VI) adsorption using different biochar-based materials through batch and saturated column adsorption experiments is documented. Electrostatic interaction and ion exchange dominate the Cr(VI) adsorption onto the biochar materials in acidic pH media. Cr(VI) ions tend to break down as HCrO₄^-, CrO₄^2-, and Cr₂O₇^2- ions in aqueous solutions. At low pH (∼1-4), the availability of HCrO₄^- ions attributes the electrostatic forces of attraction due to the available functional groups such as -NH₄⁺, -COOH, and -OH₂⁺, which encourages higher adsorption of Cr(VI). Equilibrium isotherm, kinetic, and thermodynamic models help to understand Cr(VI)-biochar interactions and their adsorption mechanism. The adsorption studies of Cr(VI) are summarized through the fixed-bed saturated column experiments and Cr-contaminated real groundwater analysis using biochar-based sorbents for practical applicability. This review highlights the significant challenges in biochar-based material applications as green, renewable, and cost-effective adsorbents for the remediation of Cr(VI). Further recommendations and future scope for the implications of advanced novel biochar materials for Cr(VI) removal and other heavy metals are elegantly discussed.

Highly efficient adsorption of chromium on N, S-codoped porous carbon materials derived from paper sludge

The synergistic effect of heteroatoms is a viable method to enhance the adsorption performance of heavy metal onto carbon-based materials. However, the high cost, complex operation and a lot of pollution from the synthesis process have limited its development. Herein, a facile two-step pyrolysis method is used to prepare in situ N and S doped porous biochar from paper mill sludge for the removal of Cr(VI) from aqueous environment. The NSC-450 sample prepared under the optimum conditions has a large specific surface area of 3336.7 m² g^-1, an average pore size of 2.56 nm and a total pore volume of 2.10 cm³ g^-1, manifesting the excellent adsorption capacity of 356.25 mg g^-1 for Cr(VI). The adsorption of Cr(VI) by NSC-450 is consistent with the Langmuir isotherm and pseudo-second-order model, suggesting a spontaneous and endothermic chemisorption process. The analysis results show that the NH, graphitic nitrogen and thiophene structures have a positive effect on converting a large amount of Cr(VI) to Cr(III) by synergistic reduction, indicating obviously facilitating Cr(VI) removal compared to other sites. Therefore, in this material, the strong adsorption mechanism is mainly reductive complexation. Moreover, the effects of real water quality, anions, cations and fulvic acid on the adsorption behavior of Cr(VI) onto the NSC-450 were further investigated. The results demonstrate that the chromium removal rate remains above 82% even in actual electroplating wastewater, suggesting NSC-450 has great practical application prospect. This work offered a feasible method for high-value utilization of sludge, but also provided a novel perspective for the future design of heteroatom-doped carbon materials for promoting to eliminate hexavalent chromium from water environment.

Magnetically separable Fe-base deposited on different carbon sources for ultrasound/persulfate-like heterogeneous activation: Optimized synthesis and field driving process

The eco-friendly composite materials, micro-nano Fe-base/glucose-derived hydro-chars (Fe_b/HCs), were prepared, whose magnetic separation can be achieved in both preparation and water treatment stages. The performances of Fe_b/HCs after N₂ heat-treatment to activate persulfate, chlorite, hydrogen peroxide, etc., in ultrasound field, obtained great improvement by extracting "O". For comparison, other different sized and magnetic iron-carbon based composites based on different carbon sources of activated carbons, cornstalk-derived bio-chars, and glucose-derived pyrolytic carbons were prepared and applied to systematically compare the performance of activation. The Fe_b/HCs with optimizing preparation were utilized as activators to well treat different structures (triphenylmethane-, azo-, and xanthene-) contaminants. The detected p-Benzoquinone and 2-chloro-p-Benzoquinone could be considered as transitional and characteristic intermediates from carbocyclic compounds to chain compounds. The degradation mechanisms were evoked by pH and absorption to trigger via free/non-free radicals processes: high valence iron-oxo species, sulfate radicals, hydroxyl radicals, Cl-based substances, etc. The findings contrastively provided the potential applications of magnetically separable iron-carbon based composites for heterogeneous activation in environmental remediation.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

In-situ growth of Co/Ni bimetallic organic frameworks on carbon spheres with catalytic ozonation performance for removal of bio-treated coking wastewater

The Co/Ni-MOFs@CS composite derived from Co/Ni bimetallic organic framework was synthesized and characterized. Compared with a single O₃ system, the synergy between carbon sphere (CS) and metal organic frameworks (MOFs) improved the electron transfer efficiency and the formation rate of •OH. The coexistence of Co and Ni in various valence states might accelerate the cyclic process of Co(II)/Co(III) and Ni(II)/Ni(III), thereby improving the catalytic activity. Taking levofloxacin as a model pollutant, the mechanism of catalytic process was discussed, and the catalytic reaction was successfully applied to the removal of residual organics in bio-treated coking wastewater (BTCW). The removal rates of chemical oxygen demand (COD) and total organic carbon (TOC) in 60 min were 50.85%-53.71% and 39.98%-43.48%. From the perspective of UV absorption and 3D EEM, catalytic ozonation was more conducive to breaking the electronic protection of inert organic molecules such as heterocyclic compounds, and achieving higher efficiency of mineralization. It provides a new idea for catalytic ozonation technology of wastewater treatment in the future from theory, technology and application.

Facile fabrication of N-doped hierarchical porous carbons derived from soft-templated ZIF-8 for enhanced adsorptive removal of tetracycline hydrochloride from water

N-doped hierarchical porous carbons (NHPCs) were successfully prepared from soft-templated zeolitic imidazolate framework-8 (ZIF-8) precursors using sodium dodecylbenzene sulfonate (SDBS) as a template through facile one-step carbonization and applied in tetracycline hydrochloride (TCH) adsorption. The NHPC synthesized at 1000 °C with an SDBS/Zn²⁺ molar ratio of 0.075 exhibited the highest TCH adsorption (q_m = 80.92 mg g^-1) owing to its relatively large BET surface area (1067.41 m² g^-1) and pore volume (1.22 cm³ g^-1) and the stronger surface interaction between TCH and NHPCs (HC1000-0.075). Compared with surfactant-free ZIF-8-derived carbon (HC), introduction of SDBS in the ZIF-8 precursor not only improved the pore structure of the carbon materials but also increased the nitrogen content and the number of surface functional groups. Adsorption kinetics and isotherms showed that the pseudo-second-order model and Sips model fit the TCH adsorption behavior on HC and HC1000-0.075 well. Adsorption experiments and characterizations revealed that the adsorption mechanism involved in TCH adsorption on HC1000-0.075 mainly depended on the synergistic effect of pore filling, H-bonding, π-π interactions, and weak electrostatic interactions. This study provides an effective and simple strategy for fabricating MOF-derived NHPCs as a promising adsorbent for the removal of antibiotics from water.

Versatile Strategy for the Preparation of Woody Biochar with Oxygen-Rich Groups and Enhanced Porosity for Highly Efficient Cr(VI) Removal

Biochar is widely used to remove hexavalent chromium [Cr(VI)] from wastewater through adsorption, which is recognized as a facile, cost-efficient, and high-selectivity approach. In this study, a versatile strategy that combines delignification with subsequent carbonization and KOH activation is proposed to prepare a novel woody biochar from waste poplar sawdust. By virtue of the unique multilayered and honeycomb porous structure induced by delignification and activation processes, the resultant activated carbonized delignified wood (ACDW) exhibits a high specific surface area of 970.52 m2 g-1 with increasing meso- and micropores and abundant oxygen-containing functional groups. As a benign adsorbent for the uptake of Cr(VI) in wastewater, ACDW delivers a remarkable adsorption capacity of 294.86 mg g-1 in maximum, which is significantly superior to that of unmodified counterparts and other reported biochars. Besides, the adsorption behaviors fit better with the Langmuir isotherm, the pseudo-second-order kinetic model, and the adsorption diffusion model in batch experiments. Based on the results, we put forward the conceivable adsorption mechanism that the synergistic contributions of the capillary force, electrostatic attraction, chemical complexation, and reduction action facilitate the Cr(VI) capture by ACDW.

Preparation of MES@Fe3O4@SiO2-PPy magnetic microspheres for the highly efficient removal of Cr(vi)

A novel magnetic adsorbent, PPy-modified silica-coated magnetic MES organic–inorganic composite (MFSP), with high dispersibility, abundant adsorption sites, and magnetic separation was prepared successfully for the adsorption or reduction of Cr(vi).

Superior elimination of Cr(VI) using polydopamine functionalized attapulgite supported nZVI composite: Behavior and mechanism

In this study, a polydopamine (PDA) modified attapulgite (ATP) supported nano sized zero-valent iron (nZVI) composite (PDA/ATP-nZVI) was rapidly synthesized under acidic conditions, and employed to alleviate Cr(VI) toxicity from an aqueous solution. Kinetic studies revealed that Cr(VI) adsorption process followed the pseudo-second order model, suggesting chemisorption was the dominant adsorption mechanism. Liu isotherm adsorption model was able to better describe the Cr(VI) adsorption isotherm with the maximum adsorption capacity of 134.05 mg/g. The thermodynamic study demonstrated that the adsorption process occurred spontaneously, accompanied by the increase in entropy and endothermic reaction. Low concentrations of coexisting ions had negligible effects on the removal of Cr(VI), while high concentrations of interfering ions were able to facilitate the removal of Cr(VI). Reactive species test revealed that Fe²⁺ played a key role in Cr(VI) reduction by PDA/ATP-nZVI. PDA enhanced the elimination of Cr(VI) via donation of electrons to Cr(VI) and acceleration of Fe³⁺ transformation to Fe²⁺. Furthermore, PDA was able to effectively inhibit the leaching of iron species and generation of ferric hydroxide sludge. Mechanistic study revealed that 72% of Cr(VI) elimination was attributed to reduction/precipitation, while 28% of Cr(VI) elimination was due to the surface adsorption.

Biomass derived hierarchical porous carbon for high-performance O2/N2 adsorption; a new green self-activation approach

Biomass-derived porous carbons are the most common adsorbent materials for O₂/N₂ adsorption because of their excellent textural properties, high surface area, and low expense. A new synthesis method based on a self-activation technique was developed for a new green porous carbon adsorbent. This ecofriendly system was used for the synthesis of hierarchical porous carbons from walnut-shell precursors. The sorbent was successfully synthesized by facile one-step carbonization, with the activating reagents being gases released during the activation. The sample morphology and structure were characterized by field emission scanning electron microscopy, high-resolution transmission electron microscopy, Raman, Fourier transform infrared spectra, X-ray photoelectron spectroscopy, X-ray powder diffraction, thermogravimetric, and differential thermal analysis. The optimal porous carbons were synthesized at 1000 °C, providing a surface area as high as 2042.4 (m² g⁻¹) and micropore volume of about 0.499 (m³ g⁻¹). At 298 °K under 9.5 bar pressure, the potential for O₂/N₂ separation using porous carbon samples was studied, and the sips isotherms with the highest adsorption potential were determined to be 2.94 (mmol g⁻¹) and 2.67 (mmol g⁻¹), respectively. The sample exhibited stable O₂/N₂ separation over ten cycles, showing high reusability for air separation. Finally, the technology described presents a promising strategy for producing eco-friendly porous carbon from a variety of biomass on an industrial scale.

Green porous carbon was synthesized by self-activation methodology with facile one-step carbonization from a walnut-shell precursor for air separation. The adsorption process behavior was surveyed using isotherm, kinetic and thermodynamic models.

Aquatic toxicity of particulate matter emitted by five electroplating processes in two marine microalgae species

Electroplating is a widely used group of industrial processes that make a metal coating on a solid substrate. Our previous research studied the concentrations, characteristics, and chemical composition of nano- and microparticles emitted during different electroplating processes. The objective of this study was to evaluate the environmental toxicity of particulate matter obtained from five different electrochemical processes. We collected airborne particle samples formed during aluminum cleaning, aluminum etching, chemical degreasing, nonferrous metals etching, and nickel plating. The toxicity of the particles was evaluated by the standard microalgae growth rate inhibition test. Additionally, we evaluated membrane potential and cell size changes in the microalgae H. akashiwo and P. purpureum exposed to the obtained suspensions of electroplating particles. The findings of this research demonstrate that the aquatic toxicity of electroplating emissions significantly varies between different industrial processes and mostly depends on particle chemical composition and solubility rather than the number of insoluble particles. The sample from an aluminum cleaning workshop was significantly more toxic for both microalgae species compared to the other samples and demonstrated dose and time-dependent toxicity. The samples obtained during chemical degreasing and nonferrous metals etching processes induced depolarization of microalgal cell membranes, demonstrated the potential of chronic toxicity, and stimulated the growth rate of microalgae after 72 h of exposure. Moreover, the sample from a nonferrous metals etching workshop revealed hormetic dose-response toxicity in H. akashiwo, which can lead to harmful algal blooms in the environment.

Preparation of a porous carbon material by hydrothermal activation of itaconic acid fermentation waste liquid and its efficient adsorption of Cr(vi)

Recycling organic waste liquid to treat chromium-containing wastewater to achieve the purpose of treating waste with waste.