Enhanced adsorption of polystyrene nanoplastics (PSNPs) onto oxidized corncob biochar with high pyrolysis temperature

Urban wastewater disinfection by FeCl3-activated biochar/peroxymonosulfate system: Escherichia coli inactivation and microplastics interference

Biochar coupled with peroxymonosulfate (PMS) to produce sulfate radicals and its application to urban wastewater disinfection has been rarely investigated and no information is available about microplastics (MPs) interference on the disinfection process. In this study, FeCl3-activated biochar (Fe-BC) was coupled to PMS to evaluate the inactivation of Escherichia coli (E. coli) in real secondary treated urban wastewater. Surface morphology of Fe-BC sample, characterized by Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS), showed a rough texture with uniform distribution of iron particles over the entire surface area. E. coli inactivation improved (∼3.8 log units, detection limit = 1 CFU/100 mL) as Fe-BC concentration was decreased (from 1.0 g/L to 0.5 g/L), at a constant PMS dose (300 mg/L). Besides, removal efficiency of E. coli was negatively affected by the presence of small (30-50 μm) polyethylene MPs (PE MPs) (200 mg/L), which could be attributed to the adsorption of MPs on Fe-BC surface, according to SEM images of post-treated Fe-BC. The low disinfection efficiency of Fe-BC/PMS system in presence MPs could be due to blocking of Fe-BC sites for PMS activation and/or radicals scavenging during treatment. These results allowed to unveil the mechanisms of MPs interference on E. coli inactivation by Fe-BC/PMS, as well as the potential of this process to make the effluent in compliance with the stringent limit for agricultural reuse.

Microplastics and nanoplastics in soil: Sources, impacts, and solutions for soil health and environmental sustainability

The present review discusses the growing concern of microplastics (MPs) and nanoplastics (NPs) in soil, together with their sources, concentration, distribution, and impact on soil microorganisms, human health, and ecosystems. MPs and NPs can enter the soil through various pathways, such as agricultural activities, sewage sludge application, and atmospheric deposition. Once in the soil, they can accumulate in the upper layers and affect soil structure, water retention, and nutrient availability. The presence of MPs and NPs in soil can also have ecological consequences, acting as carriers for pollutants and contaminants, such as heavy metals and persistent organic pollutants. Additionally, the leaching of chemicals and additives from MPs and NPs can pose public health risks through the food web and groundwater contamination. The detection and analyses of MPs and NPs in soil can be challenging, and methods involve spectroscopic and microscopy techniques, such as Fourier-transform infrared spectroscopy and scanning electron microscopy. To mitigate the presence and effects of MPs and NPs in soil, it is essential to reduce plastic waste production, improve waste management practices, and adopt sustainable agricultural practices. Effective mitigation measures include implementing stricter regulations on plastic use, promoting biodegradable alternatives, and enhancing recycling infrastructure. Additionally, soil amendments, such as biochar and compost, can help immobilize MPs and NPs, reducing their mobility and bioavailability. This review article aims to provide a comprehensive understanding of these emerging environmental issues and identify potential solutions to alleviate their impact on soil health, ecosystem functioning, and community health.

Heteroaggregation, disaggregation, and migration of nanoplastics with nanosized activated carbon in aquatic environments: Effects of particle property, water chemistry, and hydrodynamic condition

Nanosized activated carbon (NAC) as emerging engineered nanomaterials may interact with nanoplastics prevalent in aquatic environments to affect their fate and transport. This study investigated the effects of particle property (charge and concentration), water chemistry [electrolytes, pH, humic acid (HA), and sodium alginate (SA)], and hydrodynamic condition [wave (i.e., sonication) and turbulence (i.e., stirring)] on the heteroaggregation, disaggregation, and migration of NAC with positively charged amino-modified polystyrene (APS) or negatively charged bare polystyrene (BPS) nanoplastics. The homoaggregation rate of APS was slower than its heteroaggregation rate with NAC, with critical coagulation concentrations (CCC) decreasing at higher NAC concentrations. However, the homoaggregation rate of BPS was intermediate between its heteroaggregation rates under low (10 mg/L) and high (40 mg/L) NAC concentrations. The heteroaggregation rate of APS+NAC enhanced as pH increasing from 3 to 10, whereas the opposite trend was observed for BPS+NAC. In NaCl solution or at CaCl2 concentration below 2.5 mM, HA stabilized APS+NAC and BPS+NAC via steric hindrance more effectively than SA. Above 2.5 mM CaCl2, SA destabilized APS+NAC and BPS+NAC by calcium bridging more strongly than HA. The migration process of heteroaggregates was simulated in nearshore environments. The simulation suggests that without hydrodynamic disturbance, APS+NAC (971 m) may travel farther than BPS+NAC (901 m). Mild wave (30-s sonication) and intense turbulence (1500-rpm stirring) could induce disaggregation of heteroaggregates, thus potentially extending the migration distances of APS+NAC and BPS+NAC to 1611 and 2160 m, respectively. Conversely, intense wave (20-min sonication) and mild turbulence (150-rpm stirring) may further promote aggregation of heteroaggregates, shortening the migration distances of APS+NAC and BPS+NAC to 262 and 552 m, respectively. Particle interactions mainly involved van der Waals attraction, electrostatic repulsion, steric hindrance, calcium bridging, π-π interactions, hydrogen bonding, and hydrophobic interactions. These findings highlight the important influence of NAC on the fate, transport, and risks of nanoplastics in aquatic environments.

Monitoring Poly(methyl methacrylate) and Polyvinyl Dichloride Micro/Nanoplastics in Water by Direct Solid-Phase Microextraction Coupled to Gas Chromatography-Mass Spectrometry

A simple, sustainable, and sensitive monitoring approach of micro/nanoplastics (MNPs) in aqueous samples is crucial since it helps in assessing the extent of contamination and understanding the potential risks associated with their presence without causing additional stress to the environment. In this study, a novel strategy for qualitative and quantitative determination of MNPs in water by direct solid-phase microextraction (SPME) coupled with gas chromatography-mass spectrometry (GC-MS) was proposed for the first time. Spherical poly(methyl methacrylate) (PMMA) and irregularly shaped polyvinyl dichloride (PVDC) were used to evaluate the feasibility and performance of the proposed method. The results demonstrated that both PMMA and PVDC MNPs were efficiently extracted by the homemade SPME coating of nitrogen-doped porous carbons (N-SPCs) and exhibited sufficient thermal decomposition in the GC-MS injection port. Excellent extraction performances of N-SPCs coating for MNPs are attributed to hydrophobic cross-linking, electrostatic forcing, hydrogen bonding, and pore trapping. Methyl methacrylate was identified as the marker for PMMA, while 1,3-dichlorobenzene and 1,3,5-trichlorobenzene were the indicators for PVDC. Under the optimal extraction and decomposition conditions, the proposed method exhibited ultrahigh sensitivity, with a limit of detection of 0.0041 μg/L for PMMA and 0.0054 μg/L for PVDC. Notably, a programmed temperature strategy for the GC-MS injector was developed to discriminate and eliminate the potential interferences of intrinsic indicator compounds. Owing to the integration of sampling, extraction, injection, and decomposition into one step by SPME, the proposed method demonstrates exceptional sensitivity, eliminating the necessity for complex sample pretreatment procedures and the use of organic solvents. Finally, the proposed method was successfully applied in the determination of PMMA and PVDC MNPs in real aqueous samples.

Effective removal of microplastics by filamentous algae and its magnetic biochar: Performance and mechanism

In recent years, filamentous algae blooms and microplastics (MPs) pollution have become two major ecological and environmental problems in urban water systems. In order to solve these two problems at the same time, this study explored the loading capacity of MPs on fresh filamentous algae, and successfully synthesized magnetic filamentous algae biochar loading with Fe3O4 by hydrothermal method, with the purpose of removing MPs from water. The magnetic filamentous algal biochar was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and so on. Experiments on adsorption kinetics, adsorption isotherms and optimum pH were carried out to explore the adsorption mechanism of MPs on magnetic filamentous algal biochar. The adsorption kinetics and adsorption isotherm models were evaluated, and the selection criterion for the appropriate model was determined by using the residual sum of squares (RSS) and Bayesian information criterion (BIC). Microscope images revealed that fresh filamentous algae could interact with MPs in the form of entanglement, adhesion and encapsulation. The average load of MPs in filamentous algae samples was 14.1 ± 5 items/g dry weight. The theoretical maximum adsorption capacities of polystyrene MPs (PS-MPs) by raw biochar (A500) and magnetic biochar with Fe3O4 (M2A500) were 176.99 mg/g and 215.58 mg/g, respectively. The adsorbent materials gave better reusability because they could be reused up to five times. Overall, these findings have provided new insights into the use of filamentous algae for in situ remediation of fluvial MPs pollution, as well as feasible strategies for the recycling of algal waste.

Microplastic pollutants in water: A comprehensive review on their remediation by adsorption using various adsorbents

Microplastics (MPs), as emerging pollutants, have attracted the attention of environmentalists, statespersons, and the scientific community over the last few decades. To address the spread of MPs in the environment, it is imperative to develop various removal techniques and materials that are effective, scalable, and ecologically benign. However, to the best of our knowledge, no review has systematically examined the removal of MPs using adsorption or provided an in-depth discussion on various adsorbents. Adsorption is an inexpensive and effective technology for wastewater treatment. Recently, many researchers have conducted studies on MP remediation using diverse adsorbent materials, such as biochar, activated carbon, sponges, carbon nanotubes, metal-layered oxides, metal-organic frameworks (MOFs), and zeolites. Each adsorbent has advantages and disadvantages. To overcome their disadvantages, researchers have been designing and developing hybrid adsorbents for MP remediation. This review provides insights into these individual adsorbents and also discusses hybrid adsorbents for MP removal. Finally, the review elaborates on future possibilities and ways to enable more efficient, scalable, and environmentally friendly MP cleanup. Overall, this review bridges the gap between contemporary MP remediation using adsorption techniques and adsorbent development.

Rapid removal of Rhodamine B by phosphoric acid-modified activated carbon derived from rape straw

A series of activated carbon was obtained from rape straw by chemical modification with phosphoric acid (H3PO4). The activated carbon was characterized and the adsorption capacity for Rhodamine B (RhB) from water was analysed. The SEM images showed that PRC-40 is a porous material and the BET analysis revealed a high surface area of 1720 m2/g with the coexistence of micropores and mesopores. The FTIR spectra determined the presence of oxygenated functional groups at its surface. The XPS spectra revealed that the content of carboxyl and metaphosphate groups in the modified activated carbon significantly increased, and this is conducive to the adsorption reaction. The XRD pattern showed the amorphous nature of carbon. The effect of significant parameters, such as the concentration of H3PO4 for modification and pH value, has been discussed. The kinetic data showed that the pseudo-second-order model is predominant. Besides, the Langmuir model was compatible well with the equilibrium data, and the maximum adsorption capacity of the activated carbon modified by H3PO4 was 2882.84 mg/g. Therefore, agricultural waste and rape straw can be used to prepare effective adsorbents for the application with the removal of dye from wastewater.

Removal of polystyrene microplastics using biochar-based continuous flow fixed-bed column

In the realm of environmental challenges, microplastics have emerged as a pressing threat, presenting risks to both individuals and ecosystems. Conventional treatment plants are presently not equipped for effectively removing these minute contaminants. This study presents an investigation into the potential of a continuous flow biochar column, utilizing biochar derived from banana peel through a nitrogen-free slow pyrolysis process for the removal of microplastics. A systematic exploration of various parameters, including bed height, flow rate, inflow microplastic concentration, and microplastic size is undertaken to discern their impact on polystyrene removal efficiency. A peak removal efficiency of 92.16% has been achieved under specific conditions: a 6-cm bed height, a 3-mL/min flow rate, an inlet concentration of 0.05 g/L, and microplastic sizes ranging from 150 to 300 µm. The removal efficiency was inversely affected by flow rate while directly influenced by bed height. To deepen the understanding of polystyrene removal on biochar, a detailed characterization of the synthesized material was carried out. The removal of microplastics by banana peel biochar (BPB) is observed to be dominated by adsorption and filtration processes. The entanglement of microplastics with minuscule biochar granules, capture between particles, and entrapment in the porous system were identified as the mechanisms of removal. Leveraging the hydrophobic nature of polystyrene microplastics, interactions with the hydrophobic functional groups in BPB result in effective adsorption. This is further complemented by self-agglomeration and filtration mechanisms that synergistically contribute to the elimination of larger agglomerates. The findings thus provide a comprehensive understanding, offering hope for a more effective strategy in mitigating the environmental impact of microplastics.

Application of carbon-based adsorbents in the remediation of micro- and nanoplastics

Micro-nano plastics (MNPs) are emerging contaminants that can easily enter the food chain, posing risks to both the aquatic ecosystem and human health. Various physical, biological, and chemical methods have been explored to remove MNPs from water, and recently, adsorption technology has gained attention as an effective approach. Among the potential candidates, carbon-based adsorbent has emerged as a promising choice due to their low cost, eco-friendly nature, and sustainability. This paper summarizes recent advancements in MNP removal using carbon-based adsorbents, with a focus on the modification methods and adsorption mechanisms. Additionally, the factors influencing the adsorption performance and the methods for characterizing the adsorption mechanism are analyzed. Finally, the advantages and disadvantages of carbon-based adsorbents over other adsorbents are discussed, along with the current state of sustainable recycling and future research prospects.

Pyrolyzed sediment accelerates electron transfer and regulates rhodamine B biodegradation

Electron transfer efficiency is a key factor that determined the removal of environmental pollution through biodegradation. Electron shuttles exogenously addition is one of the measures to improve the electron transfer efficiency. In this study, the sediment was pyrolyzed at different temperature to investigate its properties of mediating electron transfer and removing of rhodamine B (RhB) in microbial electrochemical systems (MESs). Sediments pyrolyzed at 300 °C (PS300) and 600 °C (PS600) have promoted electron transfer which led to 16 % enhancement of power generation while the result is reversed at 900 °C (PS900). Although power output of PS300 and PS600 are similar, the removal efficiency of RhB is not consistent, which may be caused by the biofilm structure difference. Microbial community analysis revealed that the abundance of EAB and toxicity-degrading bacteria (TDB) in PS600 was 6 % higher than that in PS300. The differentiation of microbial community also affected the metabolic pathway, the amino synthesis and tricarboxylic acid cycle were primarily upregulated with PS600 addition, which enhanced the intracellular metabolism. However, a more active cellular anabolism occurred with PS300, which may have been triggered by RhB toxicity. This study showed that pyrolytic sediment exhibits an excellent ability to mediate electron transport and promote pollutant removal at 600 °C, which provides a techno-economically feasible scenario for the utilization of low-carbon-containing solid wastes.

Column-based removal of high concentration microplastics in synthetic wastewater using granular activated carbon

Microplastic (MP) is an emerging contaminant of concern due to its abundance in the environment. Wastewater treatment plant (WWTP) can be considered as one of the main sources of microplastics in freshwater due to its inefficiency in the complete removal of small MPs. In this study, a column-based MP removal which could serve as a tertiary treatment in WWTPs is evaluated using granular activated carbon (GAC) as adsorbent/filter media, eliminating clogging problems commonly caused by powder form activated carbon (PAC). The GAC is characterized via N2 adsorption-desorption isotherm, field emission scanning electron microscopy, and contact angle measurement to determine the influence of its properties on MP removal efficiency. MPs (40-48 μm) removal up to 95.5% was observed with 0.2 g/L MP, which is the lowest concentration tested in this work, but still higher than commonly used MP concentration in other studies. The performance is reduced with further increase in MP concentration (up to 1.0 g/L), but increasing the GAC bed length from 7.5 to 17.5 cm could lead to better removal efficiencies. MP particles are immobilized by the GAC predominantly by filtration process by being entangled with small GAC particles/chips or stuck between the GAC particles. MPs are insignificantly removed by adsorption process through entrapment in GAC porous structure or attachment onto the GAC surface.

Study on H2SO4-modified corn straw biochar as substrate material of constructed wetland

The high value resource utilization of corn straw is a long-term problem at present and in the future. Biochar preparation is an important utilization way of corn straw. The research on city tail water treated by constructed wetland (CW) with biochar was carried out to further increase the wastewater treatment capacity of the CW. Surface characterization, structural characteristics, and adsorption of straw biochar modified by different acids were measured. The study found that the ability of H2SO4 to remove ash from biochar was stronger than other acids and H2SO4-biochar was easy to be cleaned without H2SO4 residue. The performance of biochar modified by H2SO4 was obviously better than other acids, and the biochar adsorption was enhanced. The modification of biochar substrate modified by H2SO4 in CW reduced the change of electrical conductivity (EC) and promoted denitrification. H2SO4-modified biochar promoted the absorption of N and P by Iris pseudacorus L. The compound modification effect of straw biochar was obvious. The results revealed the acid modification characteristics of straw biochar, which were beneficial for increasing the wastewater treatment rate by CW. This study will promote the sustainable development of CW.

Mechanisms of polystyrene nanoplastics adsorption onto activated carbon modified by ZnCl2

In this study, the adsorption capacity of activated carbon was enhanced after zinc chloride activation. The effects of pore filling, n-π and π-π interaction and electrostatic interaction on the adsorption of polystyrene nanoplastics (PSNPs) by activated carbon were determined by SEM, BET, Raman spectrum, FTIR and surface Zeta potential. Pore filling, electrostatic interaction and n-π interaction and π-π interaction all played a role in the adsorption process, but n-π interaction and π-π interaction was not the decisive role. The adsorption of PSNPs on activated carbon conformed to the pseudo-second-order kinetics and Langmuir isotherm, and there was spontaneous physical adsorption process driven by entropy in the adsorption process. Further, the effects of common anions SO₄^2-, HCO₃^-, and Cl^- in water on the adsorption of PSNPs by activated carbon were investigated, and the results showed that the presence of these ions could increase the adsorption capacity to some extent. ZCAC has a stable adsorption capacity under tap water, but its adsorption capacity is affected under lake water. In addition, the reuse of activated carbon was investugated, and the adsorption capacity of activated carbon was fully recovered after high temperature calcination. This study provided a direction for materials modification of adsorbed nanoplastics and a feasible method for removal of nanoplastics in drinking water treatment plants.

Microplastics in facial cleanser: extraction, identification, potential toxicity, and continuous-flow removal using agricultural waste-based biochar

Microplastic (MP) is an emerging contaminant of concern due to its ubiquitous quantity in the environment, small size, and potential toxicity due to strong affinity towards other contaminants. In this work, MP particles (5-300 μm) were extracted from a commercial facial cleanser and determined to be irregular polyethylene (PE) microbeads based on characterization with field emission scanning electron microscopy (FESEM) and Raman spectroscopy. The potential of extracted MP acting as toxic pollutants' vector was analyzed via adsorption of methylene blue and methyl orange dye where significant dye uptake was observed. Synthetic wastewater containing the extracted MP was subjected to a continuous-flow column study using palm kernel shell and coconut shell biochar as the filter/adsorbent media. The prepared biochar was characterized via proximate and ultimate analysis, FESEM, contact angle measurement, atomic force microscopy (AFM), and Fourier transform infrared (FTIR) spectroscopy to investigate the role of the biochar properties in MP removal. MP removal performance was determined by measuring the turbidity and weighing the dry mass of particles remaining in the effluent following treatment. Promising results were obtained from the study with highest removal of MP (96.65%) attained through palm kernel shell biochar with particle size of 0.6-1.18 mm and continuous-flow column size of 20 mm.

Silicon Limitation Impairs the Tolerance of Marine Diatoms to Pristine Microplastics

Marine diatoms are currently facing increasing threats from microplastic (MP) pollution that is intertwined with the disturbed nutrient stoichiometry in seawater. The effects of nutrient imbalances such as silicon (Si) limitation on the interactions between diatoms and MPs remain poorly understood. In contrast to previous studies which mainly focused on MP toxicity, this study emphasizes how Si availability affects nano-scale interactions between pristine polystyrene MPs and diatom surfaces. Results showed that Si-starved cells were less tolerant to MP toxicity than the Si-enriched counterparts. Si limitation significantly changed the configuration and chemical composition of the perforated frustules, forming less negatively charged, more adhesive, and mechanically weaker cells. All of these changes facilitated the adsorption and hetero-aggregation between the diatom cells and MPs and compromised the diatoms' resistance to MP attack. Our study provides novel insights into the effects of pristine MPs in the marine environment under the context of dynamic nutrient conditions.

Immobilization of bacterial mixture of Klebsiella variicola FH-1 and Arthrobacter sp. NJ-1 enhances the bioremediation of atrazine-polluted soil environments

In this study, the effects of the immobilized bacterial mixture (IM-FN) of Arthrobacter sp. NJ-1 and Klebsiella variicola strain FH-1 using sodium alginate-CaCl2 on the degradation of atrazine were investigated. The results showed that the optimal ratio of three types of carrier materials (i.e., rice straw powder, rice husk, and wheat bran) was 1:1:1 with the highest adsorption capacity for atrazine (i.e., 3774.47 mg/kg) obtained at 30°C. On day 9, the degradation efficiency of atrazine (50 mg/L) reached 98.23% with cell concentration of 1.6 × 108  cfu/ml at pH 9 and 30°C. The Box-Behnken method was used to further optimize the culture conditions for the degradation of atrazine by the immobilized bacterial mixture. The IM-FN could be reused for 2-3 times with the degradation efficiency of atrazine maintained at 73.0% after being stored for 80 days at 25°C. The population dynamics of IM-FN was explored with the total soil DNA samples specifically analyzed by real-time PCR. In 7 days, the copy numbers of both PydC and estD genes in the IM-FN were significantly higher than those of bacterial suspensions in the soil. Compared with bacterial suspensions, the IM-FN significantly accelerated the degradation of atrazine (20 mg/kg) in soil with the half-life shortened from 19.80 to 7.96 days. The plant heights of two atrazine-sensitive crops (wheat and soybean) were increased by 14.99 and 64.74%, respectively, in the soil restored by immobilized bacterial mixture, indicating that the IM-FN significantly reduced the phytotoxicity of atrazine on the plants. Our study evidently demonstrated that the IM-FN could significantly increase the degradation of atrazine, providing a potentially effective bioremediation technique for the treatment of atrazine-polluted soil environment and providing experimental support for the wide application of immobilized microorganism technology in agriculture.

Efficient removal of microplastics from aqueous solution by a novel magnetic biochar: performance, mechanism, and reusability

Microplastics' (MPs) pollution removal from water bodies has become an urgent task to ensure water quality safety and water ecological security on a global scale. In this work, coprecipitation was employed to investigate the adsorption of MPs by magnetic biochar (MRB) prepared from agricultural waste rice husks in an aquatic system. The results showed that MRB can adsorb up to 99.96% of MPs in water; acidic conditions were favorable for the effective MPs' adsorption reaction, and competing anions had a greater effect on adsorption. The adsorption mechanism results revealed that the adsorption of MPs by MRB was a spontaneous process, and electrostatic attraction, surface complexation, hydrogen bonding and π-π interactions were present in the adsorption process. Furthermore, after the adsorption of MPs, MRB can be recovered by thermal treatment (500 °C) and still exhibits up to 90% MPs adsorption (after four uses). This work reveals that MRB is an inexpensive, efficient, and reusable nanoscale adsorbent for MPs pollution removal in water, which may provide new ideas for microplastic pollution control in the aqueous environment.

Removal of nanoplastics from aqueous solution by aggregation using reusable magnetic biochar modified with cetyltrimethylammonium bromide

Nanoplastics (NPs) pollution has become an emerging threat to the aquatic environment and its organisms. The removal of NPs from contaminated water is a global challenge. In this study, an efficient and reusable composite was prepared from cetyltrimethylammonium bromide (CTAB) modified magnetic biochar. The performances of CTAB modified magnetic biochar (CMB) to remove polystyrene (PS) and carboxylate-modified polystyrene (CPS) nanoparticles from water were systematically evaluated. The results showed that the PS and CPS removal performance of magnetic biochar was improved by CTAB modification. These increases were assigned to the increase in the surface hydrophobicity of CMB. Due to the strong electrostatic repulsion between the nanoparticles, PS and CPS maintained high stability in alkaline conditions, resulting in a significant decrease in removal efficiency. The removal efficiency was decreased to 67.4% for PS and to 40.7% for CPS at pH 11. The inhibition effects of NaCl on the PS and CPS removal efficiencies were decreased gradually with the increase of NaCl concentration. Among the anions studied, H₂PO₄^- had the biggest impact on the removal performance of CMB. Besides, CMB could be used to remove PS and CPS in real surface water, and the removal efficiencies of PS and CPS were 95.3% and 97.8%, respectively. Particularly, the removal efficiencies of PS and CPS were 90.2% for PS and 94.8% for CPS when CMB was recycled five times. According to the characterization results of XRD, TGA, SEM, FTIR and XPS, PS and CPS nanoparticles were removed by CMB from water mainly through aggregation instead of adsorption. The efficient removal of PS and CPS by CMB via aggregation process offers new insight into the removal of NPs from aquatic environment.

Biochar for the Removal of Emerging Pollutants from Aquatic Systems: A Review

Water contaminated with emerging pollutants has become a serious environmental issue globally. Biochar is a porous and carbon-rich material produced from biomass pyrolysis and has the potential to be used as an integrated adsorptive material. Many studies have shown that biochar is capable to adsorb emerging pollutants from aquatic systems and could be used to solve the water pollution problem. Here, we provided a dual perspective on removing emerging pollutants from aquatic systems using biochar and analyzed the emerging pollutant removal efficiency from the aspects of biochar types, pollutant types and coexistence with heavy metals, as well as the associated mechanisms. The potential risks and future research directions of biochar utilization are also presented. This review aims to assist researchers interested in using biochar for emerging pollutants remediation in aquatic systems and facilitate research on emerging pollutants removal, thereby reducing their environmental risk.

Removal efficiency and adsorption mechanisms of CeO2 nanoparticles onto granular activated carbon used in drinking water treatment plants

The presence of NPs in drinking water resources raises a global concern on their potential risk for human health, and whether or not drinking water treatment plants are able to effectively remove NPs to prevent their ingestion by humans. In this study, we investigate the efficiency of granular activated carbon (GAC), commonly used in conventional municipal water treatment processes, for the removal of CeO₂ NPs. In ultrapure water, NPs are found to have a good affinity for GAC and results indicate an increase in the adsorption capacity from 0.62 ± 0.10 to 5.05 ± 0.51 mg/g, and removal efficiency from 35 % ± 4 to 54 % ± 5 with increasing NPs concentration. Kinetic studies reveal that intraparticle diffusion is not the only rate controlling step indicating that mass transfer effect is also playing a role. Adsorption mechanisms are mainly controlled by the electrostatic attractions between the positively charged NPs and negatively charged GAC. Although electrostatic conditions in Lake Geneva water are less favorable for NPs adsorption, the adsorption capacity and removal efficiency are higher than in ultrapure water with values raising from 0.41 ± 0.17 to 7.13 ± 1.13 mg/g and 26 % ± 8 to 75 % ± 11, respectively. Furthermore, the external mass transfer process onto GAC surface is more important than for ultrapure water. NPs adsorption mechanism is explained by the presence of divalent cations and natural organic matter (NOM) which promote the formation of CeO₂ NPs-NOM-divalent cation heteroaggregates increasing both adsorption and removal efficiency by cation bridging.

Investigation of pulmonary toxicity evaluation on mice exposed to polystyrene nanoplastics: The potential protective role of the antioxidant N-acetylcysteine

Accumulating evidences show that the hazardous substance atmospheric nanoplastics increase the respiratory risk of individuals, but the inside toxicity mechanisms to lung tissue remain unclear. This study aims at investigating the potential mechanisms of inhaled cationic polystyrene nanoplastics (amine-polystyrene nanoplastics, APS-NPs)-induced pulmonary toxicity on mice. In vivo, the mice intratracheal administrated with APS-NPs suspension (5 mg/kg) were found inflammatory infiltrates in lung tissues through histopathology analysis. Furthermore, transcriptome analysis demonstrated that 1821 differentially expressed mRNA between APS group and control group were dominantly associated with 288 known KEGG pathways, indicating that APS-NPs might cause early inflammatory responses in lung tissue by activating the NLRP3/capase-1/IL-1β signaling pathway. Moreover, in vitro results also showed that NLRP3 inflammasome could be activated to induce pyroptosis in MLE-12 cells after exposure to APS-NPs. And, MH-S cells after exposure to APS-NPs exhibited increased Irg1 proteins, leading to the increasing generation of ROS and inflammatory factors (e.g., tnf-α, il-6, il-1β). In conclusion, these results revealed that Irg1/NF-κB/NLRP3/Caspase-1 signaling pathway was activated significantly after exposing to APS-NPs, leading to pulmonary toxicity on mice. Intriguingly, prior administration of the clinical antioxidant N-acetylcysteine (NAC) could serve as a possible candidate for the prevention and treatment of pulmonary toxicity induced by APS-NPs. The study contributes to a better understanding of the potential risks of environmental nanoplastics to humans and its improvement measure.

Enhanced removal of aged and differently functionalized polystyrene nanoplastics using ball-milled magnetic pinewood biochars

In this study, simple and environmentally friendly magnetic biochars were successfully prepared by ball-milling biochar with Fe₃O₄ nanoparticles to remove NPs from water. The magnetic biochars synthesized at various pyrolysis temperatures of 300 °C (MBC300), 500 °C (MBC500), and 700 °C (MBC700) were used to eliminate the unmodified (PS), aged under UV radiation (UVPS), amine-modified (PS-NH₂) and carboxylate-modified (PS-COOH) polystyrene NPs of 100 nm in size. Results showed that the removal efficiency of MBC300, MBC500, and MBC700 for PS were 43.67, 82.73 and 57.02%, which were 3.01, 5.76, and 3.10 times greater than that of corresponding pristine biochars at the same temperatures, respectively, and the strongest removal efficiency of MBC500 was 95.2% since it has the largest specific surface area and abundant oxygen-containing functional groups. The surface properties of the NPs affected their removal, and the PS-NH₂ had the highest removal rate using magnetic biochars. Compared to pristine biochars, the magnetic biochars displayed faster adsorption kinetics. The Langmuir maximum adsorption capacity of magnetic biochars for NPs were 107.7181-229.5772 mg/g, much greater than those of the pristine biochars (55.4602-80.3096 mg/g). Mechanism analysis revealed that the hydrophobicity, electrostatic attraction, H-bonding formation and π-π conjunction between the NPs and MBCs contributed to the adsorption process. This work highlights the promising potential of ball milling to be used as a simple technique for the preparation of magnetic biochar to remove NPs, especially NPs with various surface groups.

Aging of colloidal contaminants and pathogens in the soil environment: Implications for nanoplastic and COVID-19 risk mitigation

Colloidal contaminants and pathogens are widely distributed in soil, whose tiny sizes and distinct surface properties render unique environmental behaviours. Because of aging, colloids can undergo dramatic changes in their physicochemical properties once in the soil environment, thus leading to diverse or even unpredictable environmental behaviour and fate. Herein, we provide a state-of-art review of colloid aging mechanisms and characteristics and implications for risk mitigation. First, we review aging-induced formation of colloidal contaminants and aging-associated changes. We place a special focus on emerging nanoplastic (NP) contaminants and associated physical, chemical, and biological aging processes in soil environments. Second, we assess aging and survival features of colloidal pathogens, especially viruses. Viruses in soils may survive from several days to months, or even several years in groundwater, depending on their rates of inactivation and the reversibility of attachment. Furthermore, we identify implications for risk mitigation based on aging mechanisms. Hotspots of (photo)chemical aging of NPs, including plastic gauzes at construction sites and randomly discarded plastic waste in rural areas, are identified as area requiring greater research attention. For COVID-19, we suggest taking greater care in regions where viruses are persist for long periods, such as cold climate regions. Soil amendment with quicklime (CaO) may act as an effective means for pathogen disinfection. Future risk mitigation of colloidal contaminants and pathogens relies on a better understanding of aging mechanisms and more sophisticated models accurately depicting processes in real soil environments.

The effect of adsorption on the fate of colloidal polystyrene microplastics in drinking water distribution system pipe scales

With microplastics (MPs) being continuously found in various environments, the pollution of water supply systems by MPs is receiving increasing attention. As the sediment in drinking water distribution systems (DWDSs), pipe scales act as the interface for complex reactions between bulk water and pipe surfaces. Consequently, the fate of MPs in pipe scales requires exploration, especially colloidal MPs. In this study, MPs were detected in different pipe scale layers, with concentrations of 0.32-3.10 items g^-1. Subsequently, the adsorption interaction mechanisms between pipe scales and colloidal polystyrene microplastics (PSMPs) were investigated through batch adsorption experiments. The findings indicated that pipe scales showed a potential adsorption capacity for PSMPs. The adsorption kinetics and isotherms results demonstrated that the PSMP adsorption process was physically dominant and complicated. van der Waals and electrostatic interactions, hydrogen bonding, and pore filling were the main adsorption mechanisms. These results verify that colloidal MPs can be adsorbed by pipe scales, demonstrating that pipe scales play an essential role in the fate of colloidal MPs in DWDSs and the quality and security of drinking water. The secondary release of MPs from pipe scales is also worthy of attention due to the environmental and health risks.

Biochar raw material selection and application in the food chain: A review

As one of the largest carbon emitters, China promises to achieve carbon emissions neutrality by 2060. Various industries are developing businesses to reduce carbon emissions. As an important greenhouse gas emissions scenario, the reduction of carbon emissions in the food chain can be achieved by preparing the wastes into biochar. The food chain, as one of the sources of biochar, consists of production, processing and consumption, in which many wastes can be transferred into biochar. However, few studies use the food chain as the system to sort out the raw materials of biochar. A systematic review of the food chain application in serving as raw materials for biochar is helpful for further application of such technique, providing supportive information for the development of biochar preparation and wastes treating. In addition, there are many pollution sources in the food production process, such as agricultural contaminated soil and wastewater from livestock and aquatic, that can be treated on-site to achieve the goal of treating wastes with wastes within the food chain. This study focuses on waste resource utilization and pollution remediation in the food chain, summarizing the sources of biochar in the food chain and analyzing the feasibility of using waste in food chain to treat contaminated sites in the food chain and discussing the impacts of the greenhouse gas emissions. This review provides a reference for the resource utilization of waste and pollution reduction in the food chain.

A Novel Low-Cost Bio-Sorbent Prepared from Crisp Persimmon Peel by Low-Temperature Pyrolysis for Adsorption of Organic Dyes

In order to properly reuse food waste and remove various contaminants from wastewater, the development of green, sustainable and clean technologies has demonstrated potential in the efficient inhibition of secondary pollution to the environment. In this study, an economical and green method was used to prepare biochar from crisp persimmon peel (CPP) using flash-vacuum pyrolysis at different temperatures (200–700 °C; referred to as CPP200–CPP700). CPP200 has high polarity, low aromaticity and high oxygen-containing functional groups that exhibit superior MB adsorption capabilities. CPP200 that was prepared at a relatively low temperature of 200 °C exhibited a high adsorption capacity of 59.72 mg/g toward methylene blue (MB), which was relatively higher than that for alizarin yellow R (4.05 mg/g) and neutral red (39.08 mg/g), indicating that CPP200 possesses a higher adsorption selectivity for cationic dyes. Kinetics investigation revealed that the kinetic data of CPP200 for the adsorption of MB was better fitted by a linear pseudo-second-order model. Isothermal studies indicated that the linear Langmuir model was more suitable for describing the adsorption process. The adsorption thermodynamics illustrated that the adsorption of MB onto CPP200 was spontaneous and endothermic. EDS and IR analyses of CPP200 for both pre- and post-adsorption of MB showed that electrostatic interactions between oxygen-containing groups on biochar and target MB dominated the adsorption procedure, in addition to hydrogen bonding interactions. Reusability tests confirmed the excellent regeneration characteristics of CPP200, indicating that CPP200 may be used as a green, sustainable, highly efficient and recyclable adsorbent for the selective removal of cationic organic dyes.

Physicochemical modification of corn straw biochar to improve performance and its application of constructed wetland substrate to treat city tail water

Corn straw is rich in resources, and the preparation of biochar as the constructed wetland (CW) substrate is an effective measure to realize high-value resource utilization. The objective of this paper was to improve the treatment effect of CW on city tail water, the freeze-thaw cycles (FTCs) modification and chemical modification (KMnO₄, NaOH and H₂SO₄) of straw biochar and the utilization of modified straw biochar in CW were studied. The modification characteristics of straw biochar were discussed through scanning electron microscope, element determination, pore structure determination, X-ray diffraction analysis, Fourier transform infrared reflection analysis, CO₂ adsorption and desorption experiment and application experiment of CW (no plants and plants). The results show that under the influence of strong oxidation of KMnO₄, the combination of KMnO₄ and FTCs modification is easy to cause the destruction of biochar structure, and the content of carbon element is reduced. Except for the combined modification of NaOH and FTCs, other composite modifications have little effect on the crystal structure and functional groups of straw biochar. The adsorption capacity of CO₂ by FTCs modified biochar increased by 20.4%, and the adsorption capacity of CO₂ by H₂SO₄ and FTCs composite modified biochar increased by 23.0%. The effect of H₂SO₄ modification of straw biochar based on FTCs modification is obviously better than that of NaOH and KMnO₄. The research results are of great significance to improve the material structure of biochar and the purification effect of CW on city tail water.

A feasible biochar derived from biogas residue and its application in the efficient adsorption of tetracycline from an aqueous solution

The recovery of carbon materials from biogas residue (BR) could efficiently promote the efficient utilization of waste and the preparation of novel materials. In this study, a green and feasible reagent of citric acid was introduced and applied in the modification of biogas residue biochar (BRC). The modified biogas residue biochar (CABRC) showed a superior adsorption ability due to its higher specific surface area (approximately 6 times that of the BRC). Additionally, the adsorption capacities of CABRC and BRC for TC were 58.25 mg/g and 20.77 mg/g, respectively, while the TC adsorption performance of CABRC was 2.8 times that of BRC. The adsorption of TC by both BRC and CABRC was primarily controlled by physical adsorption and chemical adsorption (including pore filling, hydrogen bonding, π-π DEA interaction, and electrostatic interaction). Therefore, CABRC should be considered an environmentally friendly material due to its higher adsorption performance, which could expand its application in wastewater treatment.

Effect of Agricultural Organic Inputs on Nanoplastics Transport in Saturated Goethite-Coated Porous Media: Particle Size Selectivity and Role of Dissolved Organic Matter

The transport of nanoplastics (NPs) through porous media is influenced by dissolved organic matter (DOM) released from agricultural organic inputs. Here, cotransport of NPs with three types of DOM (biocharDOM (BCDOM), wheat strawDOM (WSDOM), and swine manureDOM (SMDOM)) was investigated in saturated goethite (GT)-coated sand columns. The results showed that codeposition of 50 nm NPs (50NPs) with DOM occurred due to the formation of a GT-DOM-50NPs complex, while DOM loaded on GT-coated sand and 400 nm NPs (400NPs) aided 400NPs transport due to electrostatic repulsion. According to the quantum chemical calculation, humic acid and cellulose played a significant role in 50NPs retardation. Owing to its high concentration, moderate humification index (HIX), and cellulose content, SMDOM exhibited the highest retardation of 50NPs transport and promoting effect on 400NPs transport. Owing to a high HIX, the effect of BCDOM on the mobility of 400NPs was higher than that of WSDOM. However, high cellulose content in WSDOM caused it to exhibit a 50NPs retardation ability that was similar to that of BCDOM. Our results highlight the particle size selectivity and significant influence of DOM type on the transport of NPs and elucidate their quantum and colloidal chemical-interface mechanisms in a typical agricultural environment.

Application fields of kitchen waste biochar and its prospects as catalytic material: A review

In China, a large amount of kitchen waste (KW) is generated each year, and the resource utilisation of the KW has become a problem. KW has a high carbon content and can be used as a raw material for biochar. Kitchen waste biochar (KWB) can be used to prepare adsorption materials, soil amendments, energy materials, carbon quantum dots, and electrode materials. However, few studies have used KWB as a raw material for catalytic materials. The application of sulfur (S) and nitrogen (N) doped biochar in the field of catalysis has proved effective and feasible. KWB contained a certain mass percentage of N and S elements, which has good application potential for use in the field of catalysis by KWB. In the process of preparing KWB by KW, keeping S and N as much as possible and converting them into pyridine N and thiophene S benefit the application of catalysis. This review provides a reference for the future application of KWB in China.

An efficient, green and sustainable potassium hydroxide activated magnetic corn cob biochar for imidacloprid removal

The extensive use of imidacloprid (IMI) has led to its being frequently detected in natural water, also caused the potential damage to the ecosystem. Development of efficient, green and sustainable technique is demanded to eliminate this problem. A novel biochar (KMCBC) derived from agriculture waste of corn cob was first time co-modified by potassium hydroxide (KOH), ferric chloride (FeCl₃) and zinc chloride (ZnCl₂), which showed the greater adsorption amount (410 mg g^-1 at 298 K) for imidacloprid (IMI). Pseudo-second-order kinetic and Langmuir isotherm models fitted well with the experimental data, together with the physicochemical characterization analysis, demonstrating that the adsorption process of IMI by KMCBC might be mainly controlled by micropore filling, π-π electron donor-acceptor and functional groups interactions (H-bonding and complexation). Additionally, the thermodynamics parameters suggested that IMI adsorption in this study was a spontaneous, endothermic and randomly increasing process. Besides, KMCBC owned the easy separation performance and promising environmental safety, also exhibited a high selective adsorption capacity regardless of solution pH (its optimum adsorption performance for IMI was obtained at pH = 5), inorganic ions strength and humic acid (HA) concentrations. The regenerated KMCBC (synergistic ultrasound/ethanol) could sustainably and efficiently adsorb IMI in the reuse cycles. Therefore, this study provided an efficient, green and sustainable adsorbent of KMCBC for IMI removal.

Microplastics and nanoplastics: Recent literature studies and patents on their removal from aqueous environment

The presence of microplastics (MP) and nanoplastics (NP) in the environment poses significant hazards towards microorganisms, humans, animals and plants. This paper is focused on recent literature studies and patents discussing the removal process of these plastic pollutants. Microplastics and nanoplastics can be quantified by counting, weighing, absorbance and turbidity and can be further analyzed using scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, surface-enhanced Raman spectroscopy and Raman tweezers. Mitigation methods reported are categorized depending on the removal characteristics: (i) Filtration and separation method: Filtration and separation, electrospun nanofiber membrane, constructed wetlands; (ii) Capture and surface attachment method: coagulation, flocculation and sedimentation (CFS), electrocoagulation, adsorption, magnetization, micromachines, superhydrophobic materials and microorganism aggregation; and (iii) Degradation method: photocatalytic degradation, microorganism degradation and thermal degradation; where removal efficiency between 58 and 100% were reported. As these methods are significantly distinctive, the parameters which affect the MP/NP removal performance e.g., pH, type of plastics, presence of interfering chemicals or ions, surface charges etc. are also discussed. 42 granted international patents related to microplastics and nanoplastics removal are also reviewed where the majority of these patents are focused on separation or filtration devices. These devices are efficient for microplastics up to 20 μm but may be ineffective for nanoplastics or fibrous plastics. Several patents were found to focus on methods similar to literature studies e.g., magnetization, CFS, biofilm and microorganism aggregation; with the addition of another method: thermal degradation.

Effects of selected functional groups on nanoplastics transport in saturated media under diethylhexyl phthalate co-contamination conditions

The production and degradation of plastic remains can result in nanoplastics (NPs) formation. However, insufficient information regarding the environmental behaviors of NPs impedes comprehensive assessment of their significant threats. In this study, the transport behavior of unmodified NPs (PSNPs), carboxyl-modified NPs (PSNPs-COOH), and amino-modified NPs (PSNPs-NH₂) was investigated using column experiments in the presence and absence of goethite (GT) and diethylhexyl phthalate (DEHP). Quantum chemical computation was performed to reveal the transport mechanisms. The results showed that GT decreased the transport of NPs and the presence of DEHP decreased it further. Van der Waals forces and small electrostatic interactions coexisted between the PSNPs and GT and caused deposition. Ligand exchange caused greater deposition of PSNPs-COOH on GT-coated sand than that of PSNPs. Although hydrogen bonding existed between the DEHP and NPs with functional groups, an increase in the positive charge and chemical heterogeneity of the collector was the main reason for DEHP promoting the deposition of NPs. Because of low absolute negative zeta potential values, PSNPs-NH₂ was sensitive to chemical heterogeneity, and thus fully deposited (over 96.9%) in GT and GT-DEHP-coated columns. Generally, the deposition of NPs due to chemical heterogeneity was more significant than that due to the formation of chemical bonds and van der Waals, electrostatic, and hydrogen interactions. Our results highlight that the surface charge and functional groups significantly influence the transport behaviors of NPs and elucidate the fate of NPs in the terrestrial environment.