Perovskite oxides for oxygen transport: Chemistry and material horizons

Hydrogen-Tolerant La0.6Ca0.4Co0.2Fe0.8O3-d Oxygen Transport Membranes from Ultrasonic Spray Synthesis for Plasma-Assisted CO2 Conversion

La0.6Ca0.4Co1-xFexO3-d in its various compositions has proven to be an excellent CO2-resistant oxygen transport membrane that can be used in plasma-assisted CO2 conversion. With the goal of incorporating green hydrogen into the CO2 conversion process, this work takes a step further by investigating the compatibility of La0.6Ca0.4Co1-xFexO3-d membranes with hydrogen fed into the plasma. This will enable plasma-assisted conversion of the carbon monoxide produced in the CO2 reduction process into green fuels, like methanol. This requires the La0.6Ca0.4Co1-xFexO3-d membranes to be tolerant towards reducing conditions of hydrogen. The hydrogen tolerance of La0.6Ca0.4Co1-xFexO3-d (x = 0.8) was studied in detail. A faster and resource-efficient route based on ultrasonic spray synthesis was developed to synthesise the La0.6Ca0.4Co0.2Fe0.8O3-d membranes. The La0.6Ca0.4Co0.2Fe0.8O3-d membrane developed using ultrasonic spray synthesis showed similar performance in terms of its oxygen permeation when compared with the ones synthesised with conventional techniques, such as co-precipitation, sol-gel, etc., despite using 30% less cobalt.

Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal-air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O2 to water (H2O) or from O2 to hydrogen peroxide (H2O2). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments (e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.

Design of Mixed Ionic-Electronic Materials for Permselective Membranes and Solid Oxide Fuel Cells Based on Their Oxygen and Hydrogen Mobility

Oxygen and hydrogen mobility are among the important characteristics for the operation of solid oxide fuel cells, permselective membranes and many other electrochemical devices. This, along with other characteristics, enables a high-power density in solid oxide fuel cells due to reducing the electrolyte resistance and enabling the electrode processes to not be limited by the electrode-electrolyte-gas phase triple-phase boundary, as well as providing high oxygen or hydrogen permeation fluxes for membranes due to a high ambipolar conductivity. This work focuses on the oxygen and hydrogen diffusion of mixed ionic (oxide ionic or/and protonic)-electronic conducting materials for these devices, and its role in their performance. The main laws of bulk diffusion and surface exchange are highlighted. Isotope exchange techniques allow us to study these processes in detail. Ionic transport properties of conventional and state-of-the-art materials including perovskites, Ruddlesden-Popper phases, fluorites, pyrochlores, composites, etc., are reviewed.

Perovskite Membranes: Advancements and Challenges in Gas Separation, Production, and Capture

Perovskite membranes have gained considerable attention in gas separation and production due to their unique properties such as high selectivity and permeability towards various gases. These membranes are composed of perovskite oxides, which have a crystalline structure that can be tailored to enhance gas separation performance. In oxygen enrichment, perovskite membranes are employed to separate oxygen from air, which is then utilized in a variety of applications such as combustion and medical devices. Moreover, perovskite membranes are investigated for carbon capture applications to reduce greenhouse gas emissions. Further, perovskite membranes are employed in hydrogen production, where they aid in the separation of hydrogen from other gases such as methane and carbon dioxide. This process is essential in the production of clean hydrogen fuel for various applications such as fuel cells and transportation. This paper provides a review on the utilization and role of perovskite membranes in various gas applications, including oxygen enrichment, carbon capture, and hydrogen production.

Synthesis and Oxygen Mobility of Bismuth Cerates and Titanates with Pyrochlore Structure

Synthesis and study of materials based on bismuth cerates and titanates were carried out. Complex oxides Bi_1.6Y_0.4Ti₂O₇ were synthesized by the citrate route; Bi₂Ce₂O₇ and Bi_1.6Y_0.4Ce₂O₇-by the Pechini method. The structural characteristics of materials after conventional sintering at 500-1300 °C were studied. It is demonstrated that the formation of a pure pyrochlore phase, Bi_1.6Y_0.4Ti₂O₇, occurs after high-temperature calcination. Complex oxides Bi₂Ce₂O₇ and Bi_1.6Y_0.4Ce₂O₇ have a pyrochlore structure formed at low temperatures. Yttrium doping of bismuth cerate lowers the formation temperature of the pyrochlore phase. As a result of calcination at high temperatures, the pyrochlore phase transforms into the CeO₂-like fluorite phase enriched by bismuth oxide. The influence of radiation-thermal sintering (RTS) conditions using e-beams was studied as well. In this case, dense ceramics are formed even at sufficiently low temperatures and short processing times. The transport characteristics of the obtained materials were studied. It has been shown that bismuth cerates have high oxygen conductivity. Conclusions are drawn about the oxygen diffusion mechanism for these systems. The materials studied are promising for use as oxygen-conducting layers in composite membranes.

The novel strategy of designing perovskite fiber membrane as reactor for catalytic oxidation

Negative impacts of wastewater contamination include harm to the environment, people, plants, and animals. Metal-based heterogeneous catalysts, particularly transition metal oxide catalysts, are a therapeutic option. However, they have limited reusability and cause secondary contaminations through metal leaching. In this work, a new membrane catalyst made of perovskite-type fiber was created and tested to remove methylene blue from wastewater. These innovative 3D perovskite ceramic catalysts work well in the breakdown of pollutants and dramatically lessen possible secondary contaminations caused by metal leaching from catalysts.

Transition metal oxide-based membranes for oxygen separation

Tonnage oxygen production is still mostly based on the traditional technology of cryogenic distillation, a century-old, capital- and energy-intensive method. It is critical to create a novel low-cost, energy-efficient approach that can meet the growing demand for oxygen in industry from the clean environmental or energy standpoint. Ruddlesden-Popper (RP) perovskite like oxides -based ionic transport membranes for the oxygen transport have recently been developed as a possible replacement for the traditional cryogenic approach. In this work, we detailly reviewed the progress of RP perovskite oxides based membranes for oxygen transport from separation mechanism, material types, synthesis methods to the final separation performance. This work advances the development of RP perovskite membranes for oxygen transport.

Synthesis of activated carbon-surfactant modified montmorillonite clay-alginate composite membrane for methylene blue adsorption

In this research work, a novel composite membrane was synthesized from activated carbon (AC) derived from sesban, sodium benzyl dodycyel sulphate (SBDS) treated montmorillonite (MMT) clay and alginate (alg) for the adsorption of methylene-blue (MB) dye. The AC-MMT-alg composite membranes were characterized using analytical characterizations such as FTIR, SEM, EDX and TGA analysis. Several important factors like initial solution pH, contact time, membrane dose, MB concentrations and temperature effect on the adsorption efficiency of membrane were investigated. MB dye adsorption on the synthesized membrane was explained well by pseudo second order equation. Isotherm study showed that MB adsorption data followed Langmuir adsorption isotherm model. The adsorption capacity of membrane for MB was 1429 mg/g from aqueous solution. Thermodynamic study confirmed endothermic and spontaneous MB adsorption on the adsorbent. The mechanistic path way indicated that electrostatic forces were involved in this adsorption process. The synthesized membrane proved an efficient adsorbent for MB adsorption from aqueous media.

Facile preparation of visible light-sensitive layered g-C3N4 for photocatalytic removal of organic pollutants

The graphite-phase carbon nitride (g-C₃N₄) photocatalytic materials were prepared by one-step calcination method to degrade methylene blue (MB) and potassium butyl xanthate (PBX) under visible light irradiation. The prepared g-C₃N₄ photocatalytic materials were investigated in detail by various characterizations, and the experiments showed that the graphitic phase carbon nitride photocatalytic materials were successfully prepared by the one-step calcination method. The material possesses excellent optical properties and strong visible light absorption, thus achieving photocatalytic degradation of MB and PBX. The catalyst dosage, pH, the initial concentration of pollutants have important effects on photocatalytic activity of MB and PBX. The photocatalytic degradation efficiency was 98.99% for MB and 96.83% for PBX under the optimal conditions (catalyst dosage, initial pollutant concentration and pH value were 500 mg L^-1, 20 mg L^-1 and 7, respevtively). The photocatalytic mechanisms on MB and PBX were elucidated. ·OH was the key specie for MB, while ·O₂^- was the key specie for PBX. This study advances the development of photocatalytic technology for mineral wastewater.

Model analysis on effect of temperature on the solubility of recycling of Polyethylene Terephthalate (PET) plastic

The massive increase in the use of PET plastic bottles has raised the challenge of accumulated waste plastics disposal and its related environmental concerns. Reusing this plastic waste through a solvent-based recycling process seems to be an eco-friendly solution for eliminating waste plastic and converting them into high quality products. The selection of solvent with its temperature requirement for the dissolution of polymeric materials is crucial in the solvent-based recycling process. Therefore, an innovative MATLAB program named HSPs-TPT was designed and constructed in this work to evaluate the dissolving power of solvents. Through this program, the solubility of the waste PET polymer was examined in thirteen (13) different solvents at different temperatures. As a results, the degree of waste PET polymer dissolution in the solvents was presented as the polymer-solvent solubility diagram, which provided the information about the relative energy difference (RED) change with the temperature rise. The program also provided the temperature range effective for the dissolution of PET by indicating the minimum and maximum solubility point for each solvent, which was further validated by the experimental data found in the literature. The proposed MATLAB program can numerically analyse the solubility of a polymer in different solvents in a short time for the recycling process and fabrication of different value-added plastic products such as polymer monoliths and membrane filters.

Synthesis and study of CuNiTiO3 as an ORR electrocatalyst to enhance microbial fuel cell efficiency

Microbial fuel cells (MFCs) have the capability of simultaneous sewage treatment and electricity generation. Modifying the cathode electrode enhances their efficiency. In this study, NiTiO₃ and CuNiTiO₃ were synthesized for practical application as cathode catalysts in a dual-chamber MFC and the performance of the modified cathodes was evaluated against a bare graphite electrode. SEM images showed that the particle sizes were mostly in the range of 40-120 and 20-80 nm for NiTiO₃ and CuNiTiO₃, respectively. According to AFM results, CuNiTiO₃ presented a higher surface roughness than NiTiO₃. MFC using CuNiTiO₃/G electrode with a reduction potential value of -0.27 V (vs. SCE) and a power density of 62.18 mW m^-2 showed better oxygen reduction reaction (ORR) activity compared with NiTiO₃/G and the bare graphite. MFC using CuNiTiO₃ cathode also showed the highest values in terms of chemical oxygen demand (COD) removal (75%) and the calculated coulombic efficiency (CE, 10%). The results obtained in this study, introduce CuNiTiO₃ as a promising electrocatalyst for further improvement of the cathodic reactions in MFC applications.

Investigation on the evolution of hydrothermal biochar

The objective of this study was to visualize trends and current research status of hydrothermal biochar research through a bibliometric analysis by using CiteSpace software. The original article data were collected from the Web of Science core database published between 2009 and 2020. A visual analysis network of national co-authored, institutional co-authored and author co-authored articles was created, countries, institutions and authors were classified accordingly. By visualizing the cited literature and journal co-citation networks, the main subject distribution and core journals were identified respectively. By visualizing journal co-citations, the main research content was identified. Further the cluster analysis revealed the key research directions of knowledge structure. Keyword co-occurrence analysis and key occurrence analysis demonstrate current research hotspots and new research frontiers. Through the above analysis, the cooperation and contributions of hydrothermal biochar research at different levels, from researchers to institutions to countries to macro levels, were explored, the disciplinary areas of knowledge and major knowledge sources of hydrothermal biochar were discovered, and the development lineage, current status, hotspots and trends of hydrothermal biochar were clarified. The results obtained from the study can provide a reference for scholars to gain a deeper understanding of hydrothermal biochar.

Rational design of mixed ionic-electronic conducting membranes for oxygen transport

The mixed ionic-electronic conducting (MIEC) oxides have generated significant research efforts in the scientific community during the last 40 years. Since then, many MIEC compounds, most of which are based on perovskite oxides, have been synthesized and characterized. These compounds, when heated to high temperatures, form solid ceramic membranes with high oxygen ionic and electrical conductivity. The driving force for oxygen ion transport is the ionic transfer of oxygen from the air as a result of the differential partial pressure of oxygen across the membrane. Electronic and ionic transport in a range of MIEC materials has been studied using the defect theory, particularly when dopants are introduced to the compound of interest. As a result, many types of ionic oxygen transport limits exist, each with a distinct phase shift depending on the temperature and partial pressure of oxygen in use. In combination with theoretical principles, this work attempts to evaluate the research community's major and meaningful achievements in this subject throughout the preceding four decades.

Sedimentary environment and relative sea level changes revealed by marine biological membrane

Marine pollution has a deleterious impact, both on the conditions of the ecosystem and the biodiversity of the ocean. Researchers in the field of marine chemistry have been putting effort into the creation of efficient catalysts for the purification of seawater. There has been extensive research done on membrane technology for the activation of peroxymonosulfate, which is an extremely effective therapy for saltwater. The sediment of QX03, which was obtained from the western coast of Bohai, is located very close to the modern coastline. The uppermost 15 m of this sector were thoroughly analyzed in sedimentary petrology, grain size, shell, and sediment chroma dating to reconstruct the sedimentary environment and relative sea-level during the time period of 44.80 ka cal BP. This indicates that a sea-retreating and retreating process has taken place; VI (5.2-0 m), Terrestrial deposition, is separated into swamp wetlands (VI-1) and flood plain (VI-2). The changes in sedimentary levels had a fairly strong correlation with the changes in sea level. Within the scope of this study, we conducted an in-depth investigation of the innovative membrane technology for the treatment of seawater by means of aqueous phase advanced oxidation close to the Bohai. The results of this study present a prospective technique that could make it possible to use membrane technology in the process of environmental restoration in marine settings.

Scientometric analysis and scientific trends on microplastics research

In recent years, the environmental pollution of microplastics has attracted much attention. To date, there have been a lot of researches on microplastics and a series of studies published. In this study, by bibliometric analysis method to evaluated the development and evolution on microplastics research trends and hot spots. A total of 2872 literature information was collected from the Web of Science (2004-2020), which was used for bibliometric visual analysis by CiteSpace. It was possible to see the contributing countries, institutions, authors, keywords, and future study directions in the microplastics sectors by looking at the visual representation of the results. (1) Since 2004, scientific advancements in this sector have advanced significantly, with a significant increase in speed since 2012. (2) China and the United States are the world's leading researchers in microplastics. (3) The study of microplastics was multidisciplinary, comprising researchers from the fields of ecology, chemistry, molecular biology, environmental science, and oceanography. (4) In recent years, researchers have concentrated their attention on the distribution and toxicity of microplastics in the environment, as well as their coupled pollution with heavy metal contaminants. In conclusion microplastics study in environmental science has become increasingly popular in recent years. Topics include dispersion, toxicity, and coupled pollution with heavy metal pollutants. Researchers in a wide range of fields are involved in microplastics research. Furthermore, policies and regulations about microplastics in global were summarized, and membrane technology has potential to remove microplastics from water. The above findings help to clearly grasp the content and development trend of microplastics research, point out the future research direction for scholars, and promote microplastics research and pollution prevention and control.

Heavy metals pollution characteristics and risk assessment in sediments and waters: The case of Tianjin, China

Potential health and ecological risks due to heavy metal pollution in surface waters and sediments were evaluated based on a health risk assessment model and a potential ecological risk index method. Combined with the reclamation progress of Tianjin Nangang Industrial Zone, in China, a survey was carried out in the area dealing with heavy metals concentrations in surface waters and sediments, covering from 2008 to 2018. Specifically, concentrations were determined for As, Cd, Hg, Cu, Pb, and Zn. The results show that As、Cd、Hg、Cu 、Pb、Zn average concentrations in surface water were 0.99 μg/L∼1.27 μg/L, 0.13 μg/L∼0.63 μg/L, 0.03 μg/L∼0.13 μg/L, 1.5 μg/L∼4.65 μg/L, 1.25 μg/L∼4.7 μg/L, 13.5 μg/L∼20.99 μg/L and which average concentrations in sediment were 5.12 mg/kg∼12.34 mg/kg, 0.12 mg/kg∼0.18 mg/kg, 0.04 mg/kg ∼0.087 mg/kg, 13.45 mg/kg∼31.92 mg/kg, 13.2 mg/kg ∼21.26 mg/kg, 21.58 mg/kg ∼77.21 mg/kg, respectively. The background values of the Hailuan River basin near the study area were taken as the reference and compared with the national sediment quality standards a tell us the quality of the sediments in Tianjin Nangang coastal area being good. As regards the characteristics of pollution, heavy metals showed a high concentration in 2008 and then decreased significantly, which related to the dredging of large amounts of contaminated surface sediment during port construction. According to the phase equilibrium partition coefficient (Kp) and temporal and spatial distribution characteristics of heavy metals, sediments can be seen as an obvious sink for lead, with this element being mainly affected by exogenous input in coastal seawater. Zn, As, Cd, and Hg contents in surface water were greatly affected by the endogenous release from sediments. The results of the environmental risk assessment showed that the main environmental health risk of Tianjin coastal waters was carcinogenic, and specifically due to As. The potential heavy metals ecological risk assessment results of surface sediments were mild for the affected areas.

Photocatalytic degradation of amoxicillin and tetracycline by template synthesized nano-structured Ce3+@TiO2 thin film catalyst

Contamination of the aquatic environment with pharmaceutical compounds is a serious environmental concern. The present investigation aims to utilize the Ce³⁺/TiO₂ thin film catalyst to remove of potential antibiotics (amoxicillin and tetracycline) using the less harmful UV-A radiations. Reduced cerium ion-doped TiO₂ is obtained by a simple one-step facile template method using polyethylene glycol as the templating agent. The synthesized catalysts Ce³⁺@TiO₂ (non-template) and Ce³⁺@TiO₂(T) (template) were characterized by spectroscopic methods. The XPS reaffirms the reduced Ce³⁺ dispersed within the titania network, and the AFM showed the surface roughness of the thin films. Detailed physicochemical analyses were conducted to deduce the degradation mechanism, and repeated use of the thin film photocatalyst showed enhanced stability. Significant mineralization of the antibiotics indicates the potential applicability of the photocatalytic catalyst. Furthermore, the presence of Ce³⁺ significantly restricted the recombination of electron/hole pairs in the photo-excited TiO₂ semiconductor and showed enhanced photocatalytic degradation of the antibiotics proceeded predominantly through the •OH.

Geophysical Implications for Prospective Prediction of Copper Polymetallic Ore Bodies: Northern Margin of Alxa Block, China

The Alxa Block is located in the middle part of the Central Asian orogenic belt, which is the coupling belt of the North China, Tarim, and Kazakhstan Plates. The east–west-trending deep faults control stratigraphic distribution and magmatic activity in the region. To detect the EW-trending ore-controlling deep structures, a 440 km NS section of magnetotelluric sounding was conducted from Minle to Ejinaqi. The phase tensor and electrical principal axis were analyzed based on the measured data to build the exploration model. The electrical structure model along the section was obtained using nonlinear conjugate gradient (NLCG) 2D inversion. Combined with the geological, geophysical, and deposit distribution characteristics in the area, the comprehensive study of magnetotelluric sounding profile shows that the resistivity presents as zoned along the profile. The Engelwusu ophiolite mélange belt is stacked in clumps with high and low resistivity, indicating that the northern margin of the Engelwusu Belt subducts below the high-resistivity zone, representing the passive continental margin. The southern end of the Engelwusu ophiolite belt is primarily the prospecting potential area for copper–gold deposits, whereas the northern end of the Engelwusu ophiolite belt corresponds to copper polymetallic deposits.

State-of-the-Art Organic- and Inorganic-Based Hollow Fiber Membranes in Liquid and Gas Applications: Looking Back and Beyond

The aggravation of environmental problems such as water scarcity and air pollution has called upon the need for a sustainable solution globally. Membrane technology, owing to its simplicity, sustainability, and cost-effectiveness, has emerged as one of the favorable technologies for water and air purification. Among all of the membrane configurations, hollow fiber membranes hold promise due to their outstanding packing density and ease of module assembly. Herein, this review systematically outlines the fundamentals of hollow fiber membranes, which comprise the structural analyses and phase inversion mechanism. Furthermore, illustrations of the latest advances in the fabrication of organic, inorganic, and composite hollow fiber membranes are presented. Key findings on the utilization of hollow fiber membranes in microfiltration (MF), nanofiltration (NF), reverse osmosis (RO), forward osmosis (FO), pervaporation, gas and vapor separation, membrane distillation, and membrane contactor are also reported. Moreover, the applications in nuclear waste treatment and biomedical fields such as hemodialysis and drug delivery are emphasized. Subsequently, the emerging R&D areas, precisely on green fabrication and modification techniques as well as sustainable materials for hollow fiber membranes, are highlighted. Last but not least, this review offers invigorating perspectives on the future directions for the design of next-generation hollow fiber membranes for various applications. As such, the comprehensive and critical insights gained in this review are anticipated to provide a new research doorway to stimulate the future development and optimization of hollow fiber membranes.

Potentially toxic elements in cascade dams-influenced river originated from Tibetan Plateau

Rivers originated from Tibetan Plateau are of great significance due to their environmental sensibility and fragility. However, the pollution of suspended particulate matter (SPM) in these rivers is rarely reported, in particular, the potentially toxic elements (PTEs) contamination. To clarify the status, sources, behavior, and risks of PTEs in SPM, a full investigation was conducted in dams-influenced Lancangjiang River basin. The findings revealed that the PTEs content (mg kg^-1) ranked Mn (766) > V (151.7) > Zn (131.0) > Cr (94.6) > Ni (44.2) > Pb (36.7) > Cu (29.4) > Co (14.6) > Sb (2.6) > Mo (1.6) > Tl (0.78) > Cd (0.48). The multi-index assessment suggested that Sb and Cd were moderately severe to severe enriched PTEs with the enrichment factor values of 10.0 and 8.8 and the geo-accumulation index values of 2.2 and 2.0, respectively, while the rest of PTEs were minor/no enrichment. In contrast, Cr and Ni were major toxic elements in SPM which contributed 25 ± 10%, 24 ± 8% to the total toxic risk index. The high partition coefficients (e.g., 6.1 for Cr) were observed in most PTEs and resulted in the 96.3% of Cr, 85.2% of Zn, 83.6% of Pb, 77.8% of Ni, and 63.2% of Cu transportation in the SPM form. Natural inputs (e.g., soil erosion) are the main source (53.6%∼61.9%) of V, Cr, Mn, Co, Ni, and Tl, while fuel burning contributed 40.9% of Zn, 32.5% of Pb, and 37.3% of Cd. Moreover, 51.2% of Sb was attributed to industrial waste source, while porphyry copper/molybdenum deposits related milltailings were the co-source of Mo (54.4%) and Cu (34.8%). Overall, the PTEs geochemistry of SPM showed the potential in tracing regional environmental change.

Effective Method of Estimating the Daily Evapotranspiration of Greenhouse Grapes in the Cold Area of Northeast China

Evapotranspiration (ET) is an important basis and key link for guiding irrigation. One of the key problems to be solved is how to predict the dynamic change in the daily ET and estimate the total amount of ET in greenhouse through limited instantaneous data. In this paper, it is estimated that the daily scale of evapotranspiration by using four methods, including the evaporative fraction method (EF method), the reference evaporative fraction method (EF' method), the sine method, and the canopy resistance method (r c method), is based on the measured ET data of grapes in a solar greenhouse in Northeast China. The relative root-mean-square pair error (RRMSE) and the efficiency coefficient (ε) are also used to study their applicability in terms of leaf area index, radiation degree, and scale-up time point. In the results, under the condition of different LAI, the simulation accuracies of ET scaled by the four methods ranked as follows (from highest to lowest): the reference evaporative fraction method, the evaporative fraction method, the sine method, and the canopy resistance method. The average RRMSE and ε of the evaporative fraction method with the best simulation accuracy were 7.19-16.46% and 0.61-0.75, respectively. Under different radiation conditions, the simulation accuracies of the four methods ranked as follows (from highest to lowest): the evaporative fraction method, the reference evaporative fraction method, the sine method, and the canopy resistance method. Under different radiation conditions, the RRSME of the four methods ranged from 11.55 to 46.62%, and the maximum of ε was 0.75. The evaporative fraction and reference evaporative fraction methods had the highest simulation accuracy, whereas the reference evaporative fraction method required fewer parameters. We concluded that the reference evaporative fraction method was the best for estimating the daily ET of greenhouse grapes in the cold area of Northeast China.

Open Tubular Column Immobilized with Covalent Organic Frameworks for Rapid Separation of Small Molecular Compounds by Capillary Electrochromatography

Preparation of a novel TpBD (synthesized from phloroglucinol and benzidine) covalent organic framework (COF) immobilized open-tubular (OT) capillary is described by in situ growth strategy. The stationary phase in the column was characterized by Fourier transform infrared (FTIR) spectra, X-ray diffraction (XRD), thermogravimetric analysis (TGA), nitrogen adsorption–desorption isotherms, scanning electron microscope (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectrum (EDS). Several families of compounds with different properties (alkylbenzenes, parabens, sulfonamides and benzoic acids) were selected to evaluate the performance of the TpBD COF immobilized capillary. The results showed that the stationary phase was uniform with about 6.0 μm thickness under the optimal preparation conditions, and the relative standard deviations (RSDs) were no more than 3.13% of alkylbenzenes on the TpBD COF immobilized capillary for 11 consecutive runs, which exhibited its excellent reproducibility and stability. A rapid baseline separation of each family of the analytes (neutral parabens, amphoteric sulfonamides and acidic benzoic acids) was obtained in less than 6 min with a resolution (Rs) of 2.79~9.30, which sufficiently verified the rapid separation, high resolution and wide application range of the TpBD COF immobilized capillary, and further revealed this strategy of fabricating COF to capillary column to show great promise in capillary electrochromatography.

On Thermodynamic Aspects of Oxide Crystal Growth

Several metal oxide compounds, especially those containing metals possessing several valence states, are able to absorb or release oxygen under suitable thermodynamic conditions. Such behavior is found often in systems containing oxides of transition metals. It is important to note that the equilibrium oxidation level of those metal oxides can depend on the aggregation state, which may significantly impede crystal growth processes from the melt. If during the melt growth of such oxide crystals, the average valence state of the oxides is different in the molten and solid state, then crystallization is connected with the absorption of free oxygen from the ambient gas, or with the release of free oxygen into it. This phenomenon can be detected by simultaneous DTA/TG measurements and can deteriorate the stability of crystal growth. This holds especially if the average valence in the solid is smaller than in the melt, because oxygen release can lead to bubble formation at the crystallization front.