Biotechnological potential of rumen microbiota for sustainable bioconversion of lignocellulosic waste to biofuels and value-added products

Metagenomic analysis reveals a dynamic rumen microbiome with diversified adaptive functions in response to dietary protein restriction and re-alimentation

Understanding the dynamics of the rumen microbiome is crucial for optimizing ruminal fermentation to improve feed efficiency and addressing concerns regarding antibiotic resistance in the livestock production industry. This study aimed to investigate the adaptive effects of microbiome and the properties of carbohydrate-active enzymes (CAZy) and antibiotic resistance genes (ARGs) in response to dietary protein shifts. Twelve Charolais bulls were randomly divided into two groups based on initial body weight: 1) Treatment (REC), where the animals received a 7 % CP diet in a 4-week restriction period, followed by a 13 % CP diet in a 2-week re-alimentation period; 2) Control (CON), where the animals were fed the 13 % CP diet both in the restriction period and the re-alimentation period. Protein restriction decreased the concentrations of acetate, propionate, isovalerate, glutamine, glutamate, and isoleucine (P < 0.05), while protein re-alimentation increased the concentrations of arginine, methionine sulfoxide, lysine, and glutamate (P < 0.05). Protein restriction decreased the relative abundances of Bacteroidota but increased Proteobacteria, with no difference observed after re-alimentation. Protein restriction decreased relative abundances of the genera Bacteroides, Prevotella, and Bifidobacterium. Following protein recovery, Escherichia was enriched in CON, while Pusillibacter was enriched in REC, indicating that distinct microbial adaptations to protein shifts. Protein restriction increased GH97 while reducing GH94 and GT35 compared to CON. Protein restriction decreased abundances of KO genes involved in VFA production pathways, while they were recovered in the re-alimentation period. Protein restriction reduced tet(W/32/O) abundances but increased those of tet(X), nimJ, and rpoB2. Following protein re-alimentation, there was a decrease in ErmQ and tet(W/N/W), and an increase in Mef(En2) compared to CON, highlighting the impact of dietary protein on the distribution of antibiotic-resistant bacteria. Overall, comprehensive metagenomic analysis reveals the dynamic adaptability of the microbiome in response to dietary shifts, indicating its capacity to modulate carbohydrate metabolism and ARGs in response to protein availability.

Novel sulfonic groups grafted sugarcane bagasse biosorbent for efficient removal of cationic dyes from wastewater

In this research, we reported the synthesis of effective sulphonated sugarcane bagasse (SCB@SA) biosorbent based on agriculture waste materials via a simple diazotization strategy for the removal of methylene blue (MB) and Bismarck Brown R(BB) dyes from waste water samples. First, the sugarcane bagasse (SCB) waste was collected, grinded, and sieved to obtain the desired size. Secondly, the SCB powder is modified with sulfanilinic acid (SA) via the formation of its diazonium salt to introduce sulfonic groups on the SCB surface. Different advanced techniques were applied to characterize the prepared materials before and after the adsorption process viz. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS) and Thermogravimetric analysis (TGA). Different parameters affecting the adsorption process of both MB and BB were studied. Because of the higher correlation coefficient (R2 ≥ 0.999) and lower error functions, the equilibrium MB and BB adsorption isotherms for a single-dye system fit Langmuir with maximum adsorption capacity reaching to 127.48 and 166.75 mg/g for MB and BB, respectively. Moreover, the RL values obtained for both dyes lie between 0 and 1, indicating that MB and BB adsorption by SCB@SA is a favorable process. Besides, the error functions' values of the pseudo-2nd-order are significantly lower than those of the pseudo-1st-order, implying that the adsorption MB and BB onto SCB@SA biosorbent fitted the pseudo-2nd-order kinetic model in a chemosorption manner. In the thermodynamic studies, the adsorption process is spontaneous, exothermic, and has less randomness. In addition, the SCB@SA biosorbent could be reused in five cycles maintaining on suitable adsorption efficiency. Finally, the MB and BB dyes could be adsorbed on the SCB@SA biosorbent via three mechanisms including π-π stacking, columbic attraction, and hydrogen bonding.

Biofuel production for circular bioeconomy: Present scenario and future scope

In recent years, biofuel production has attracted considerable attention, especially given the increasing worldwide demand for energy and emissions of greenhouse gases that threaten this planet. In this case, one possible solution is to convert biomass into green and sustainable biofuel, which can enhance the bioeconomy and contribute to sustainable economic development goals. Due to being in large quantities and containing high organic content, various biomass sources such as food waste, textile waste, microalgal waste, agricultural waste and sewage sludge have gained significant attention for biofuel production. Also, biofuel production technologies, including thermochemical processing, anaerobic digestion, fermentation and bioelectrochemical systems, have been extensively reported, which can achieve waste valorization through producing biofuels and re-utilizing wastes. Nevertheless, the commercial feasibility of biofuel production is still being determined, and it is unclear whether biofuel can compete equally with other existing fuels in the market. The concept of a circular economy in biofuel production can promote the environmentally friendly and sustainable valorization of biomass waste. This review comprehensively discusses the state-of-the-art production of biofuel from various biomass sources and the bioeconomy perspectives associated with it. Biofuel production is evaluated within the framework of the bioeconomy. Further perspectives on possible integration approaches to maximizing waste utilization for biofuel production are discussed, and what this could mean for the circular economy. More research related to pretreatment and machine learning of biofuel production should be conducted to optimize the biofuel production process, increase the biofuel yield and make the biofuel prices competitive.

Rumen fluid pretreatment promotes anaerobic methane production: revealing microbial dynamics driving increased acid yield from different concentrations of corn straw

In this work, the corn straw (CS) with concentrations of 3%, 6%, and 9% (w/v) were pretreated by rumen fluid (RF) and then used for batched mesophilic biogas production. The results showed that after a 6-day pretreatment, volatile fatty acid (VFAs) production of 3.78, 8.27, and 10.4 g/L could be found in 3%, 6%, and 9%, respectively. When concerning with biogas production, the highest accumulative methane production of 149.1 mL CH4/g volatile solid was achieved by 6% pretreated CS, which was 22% and 45% higher than 3% and 9%, respectively. Also, it was 3.6 times higher than the same concentration of unpretreated CS. The results of the microbial community structure analysis revealed that the 6% CS pretreatment not only maintained a microbial community with the highest richness and diversity, but also exhibited the highest relative abundance of Firmicutes (45%) and Euryarchaeota (3.9%). This high abundance was conducive to its elevated production of VFAs and methane. These findings provide scientific reference for the utilization of CS and support the development of agricultural waste resource utilization and environmental protection.

A review on value-addition to plastic waste towards achieving a circular economy

Plastic and mixed plastic waste (PW) has received increased worldwide attention owing to its huge rate of production, high persistency in the environment, and unsustainable waste management practices. Therefore, sustainable PW management and upcycling approaches are imperative to achieve the objectives of the United Nations Sustainable Development Goals. Numerous recent studies have shown the application and feasibility of various PW conversion techniques to produce materials with better economic value. Within this framework, the current review provides an in-depth analysis of cutting-edge thermochemical technologies such as pyrolysis, gasification, carbonization, and photocatalysis that can be used to value plastic and mixed PW in order to produce energy and industrial chemicals. Additionally, a thorough examination of the environmental impacts of contemporary PW upcycling techniques and their commercial feasibility through life cycle assessment (LCA) and techno-economical assessment are provided in this review. Finally, this review emphasizes the opportunities and challenges accompanying with existing PW upcycling techniques and deliver recommendations for future research works.

Rumen microbes, enzymes, metabolisms, and application in lignocellulosic waste conversion - A comprehensive review

The rumen of ruminants is a natural anaerobic fermentation system that efficiently degrades lignocellulosic biomass and mainly depends on synergistic interactions between multiple microbes and their secreted enzymes. Ruminal microbes have been employed as biomass waste converters and are receiving increasing attention because of their degradation performance. To explore the application of ruminal microbes and their secreted enzymes in biomass waste, a comprehensive understanding of these processes is required. Based on the degradation capacity and mechanism of ruminal microbes and their secreted lignocellulose enzymes, this review concentrates on elucidating the main enzymatic strategies that ruminal microbes use for lignocellulose degradation, focusing mainly on polysaccharide metabolism-related gene loci and cellulosomes. Hydrolysis, acidification, methanogenesis, interspecific H2 transfer, and urea cycling in ruminal metabolism are also discussed. Finally, we review the research progress on the conversion of biomass waste into biofuels (bioethanol, biohydrogen, and biomethane) and value-added chemicals (organic acids) by ruminal microbes. This review aims to provide new ideas and methods for ruminal microbe and enzyme applications, biomass waste conversion, and global energy shortage alleviation.

The effect and mechanism of variable particle size microplastics and levofloxacin on the neurotoxicity of Rana nigromaculata based on the microorganism-intestine-brain axis

Microplastics (MPs) usually appear in the aquatic environment as complex pollutants in combination with other environmental pollutants, such as levofloxacin (LVFX). After a 45-day exposure to LVFX and MPs with different particle sizes at environmental levels, LVFX was neurotoxic to Rana nigromaculata tadpoles. The order of the effects of the exposure treatment on tadpole behavior was: LVFX-MP3>LVFX-MP1>LVFX-MP2 ≥ LVFX. Results of transcriptome analysis of tadpole brain tissue showed that LVFX in combination with 0.10 and 10.00 μm MP interferes with the nervous system through the cell adhesion molecules pathway. Interestingly, the order of effects of the co-exposure on oxidative stress in the intestine was inconsistent with that of tadpole behavior. We found that Paraacteroides might be a microplastic indicator species for the gut microbiota of aquatic organisms. The results of the targeted metabolism of neurotransmitters in the intestine suggest that in the LVFX-MP2 treatment, LVFX alleviated the intestinal microbiota disorder caused by 1.00 μm MP, by regulating intestinal microbiota participating in the TCA cycle VI and gluconeogenesis and tetrapyrrole biosynthesis I, while downregulating Met and Orn, and upregulating 5HIAA, thereby easing the neurotoxicity to tadpoles exposed to LVFX-MP2. This work is of great significance for the comprehensive assessment of the aquatic ecological risks of microplastics-antibiotic compound pollutants.

Effect of high corn straw loads on short-chain fatty acid production in semi-continuous rumen reactor

Ruminal microorganisms can efficiently hydrolyze biomass waste for short-chain fatty acid (SCFA) production. However, the continuous SCFA production by ruminal microorganisms at high loads is unclear. In this study, the effectiveness of a rumen semi-continuous reactor at high load for SCFA production was explored. Results showed that SCFA concentration reached 13.3 g/L at 8 % (w/v) corn straw load. The higher the corn straw load, the lower the volatile solid removal. Rumen microbial community composition changed significantly with increasing corn straw load. A significant decrease in bacterial diversity and abundance was observed at 8 % corn straw load. Some core genera such as Prevotella, Saccharofermentans, and Ruminococcus significantly increased. As corn straw loads increased, the expression of functional genes related to hydrolysis and acidogenesis gradually increased. Thus, the 8.0 % load is suitable for SCFA production. These findings provide new insights into high load fermentation of ruminal microorganisms.

Lignin-degrading enzyme production was enhanced by the novel transcription factor Ptf6 in synergistic microbial co-culture

Synergistic microbial co-culture has been an efficient and energy-saving strategy to produce lignin-degrading enzymes (LDEs), including laccase, manganese peroxidase, and versatile peroxidase. However, the regulatory mechanism of microbial co-culture is still unclear. Herein, the extracellular LDE activities of four white-rot fungi were significantly increased by 88-544% over monoculture levels when co-cultured with Rhodotorula mucilaginosa. Ptf6 was demonstrated from the 9 million Y1H clone library to be a shared GATA transcription factor in the four fungi, and could directly bind to the laccase gene promoter. Ptf6 exists in two alternatively spliced isoforms under monoculture, namely Ptf6-α (1078 amino acids) containing Cys2/Cys2-type zinc finger and Ptf6-β (963 amino acids) lacking the complete domain. Ptf6 responded to co-culture by up-regulation of both its own transcripts and the proportion of Ptf6-α. Ptf6-α positively activated the production of most LDE isoenzymes and bound to four GATA motifs on the LDEs' promoter with different affinities. Moreover, Ptf6-regulation mechanism can be applicable to a variety of microbial co-culture systems. This study lays a theoretical foundation for further improving LDEs production and providing an efficient way to enhance the effects of biological and enzymatic pretreatment for lignocellulosic biomass conversion.

Response of rumen microorganisms to pH during anaerobic hydrolysis and acidogenesis of lignocellulose biomass

Rumen microorganisms can efficiently degrade lignocellulosic wastes to produce volatile fatty acids (VFAs). pH is a key factor in controlling the type and yield of VFAs by affecting the microorganisms involved in rumen fermentation. However, the effects of different pH on rumen microbial diversity, communities, and mechanisms are unclear. In this study, the hydrolysis and acidogenesis of corn straw and diversity, communities, and mechanisms of rumen microorganisms were explored at different initial pHs. Results showed that the highest hemicellulose, cellulose, and lignin degradation efficiency of corn straw was 55.2 %, 38.3 %, and 7.01 %, respectively, and VFA concentration was 10.2 g/L at pH 7.0. Low pH decreased the bacterial diversity and increased the fungal diversity. Rumen bacteria and fungi had different responses to initial pHs, and the community structure of bacteria and fungi had obviously differences at the genus level. The core genera Succiniclasticum, Treponema, and Neocallimastix relative abundance at initial pH 7.0 samples were significantly higher than that at lower initial pHs, reaching 6.01 %, 1.61 %, and 5.35 %, respectively. The bacterial network was more complex than that of fungi. pH, acetic acid, and propionic acid were the main factors influencing the bacterial and fungal community structure. Low pH inhibited the expression of functional genes related to hydrolysis and acidogenesis, explaining the lower hydrolysis and acidogenesis efficiency. These findings will provide a better understanding for rumen fermentation to produce VFAs.

Ruminal content biochar supplementation for enhanced biomethanation of rice straw: Focusing on biochar characterization and dose optimization

Anaerobic digestion (AD) of agricultural wastes is a promising approach for energy recovery and crop residue management. However, its recalcitrant chemical structure hinders microbial hydrolysis and reduces biomethane production under AD. Biochar supplementation has been proven to promote the digestibility and biomethanation of lignocellulosic substrates. Therefore, this study investigated the influence of different pyrolysis temperatures (450 °C, 550 °C, and 650 °C) on the physicochemical properties of biochar. Furthermore, the impact of ruminal content biochar supplementation (1 %, 2 %, and 3 %) on the AD of rice straw with rumen fluid as inoculum has been investigated. The ruminal content biochar (RUCB) supplemented reactors showed an increment in biomethane yield and the highest cumulative biomethane yield 243.11 mL/g volatile solids (VS)) was recorded at 2 % RUCB supplementation, followed by 227.12 mL/g VS at 1 % RUCB supplementation and 162.86 mL/g VS at 3 % RUCB supplementation (P > 0.05). Compared to the control reactors (128.68 mL/g VS), RUCB supplemented reactors exhibited 1.88-fold, 1.76-fold, and 1.26-fold increments in biomethane yield due to pH stabilization and facilitation of microbial biofilm formation on the biochar. The correlation analysis showed that biomethane production is positively correlated with VS reduction (R2 = 0.9852). This study proposed a potential strategy to utilize ruminal content waste as a feedstock for biochar production and its application in AD for accelerating the biomethanation of rice straw.

Optimisation of Manganese Peroxidase (MnP) Activity of Enterobacter wuhouensis Using Response Surface Method and Evaluation of Its Maillard Reaction Products Along with Lignin Degradation Ability

Manganese peroxidase (MnP), a microbial ligninolytic enzyme which plays significant role in lignin and melanoidin degradation has gained much attention in the field of industry. In the present study, 15 ligninolytic bacteria were isolated from the soil sample of Similipal Biosphere Reserve (SBR) and screened for MnP activity. The most efficient MnP-producing bacterium HNB5 was evaluated for alkali lignin and maillard reaction products (MRPs) degradation and identified as Enterobacter wuhouensis using 16S rRNA sequencing. This bacterium exhibited the highest MnP activity of 2.6 U mL-1 min-1 in un-optimized conditions. Further, optimization using response surface methodology E. wuhouensis showed increased MnP activity of 4.11 U mL-1 min-1 at pH 6.3, temperature 37 °C, substrate concentration 1.05%, and time 144 h. In both FT-IR and UV-Vis spectrophotometry analyses of control and bacterium degraded MRPs, the reduction in Maillard product colour was correlated with shifting absorption peaks. Also, the GC-MS analysis data showing a change in functional group revealed the rise of novel peaks caused due to the degradation of MRPs complex. The phytotoxicity study was conducted for bacterial degraded MRPs medium revealed that toxicity of the medium decreased after bacterial treatment. The findings of the current study suggest that the manganese MnP produced by E. wuhouensis isolated from SBR soil sample may be employed for bioremediation purposes to degrade MRPs.

Graphical abstract

Green and chemical-free pretreatment of corn straw using cold isostatic pressure for methane production

In this study, the effect of cold isostatic pressure (CIP) pretreatment on the physicochemical properties and subsequent anaerobic digestion (AD) performance of corn straw (CS) was explored. The CS was subjected to CIP pretreatment by pressures of 200, 400 and 600 MPa, respectively, while AD was carried out at medium temperature (35 ± 2 °C). The results showed that CIP pretreatment disrupted the dense structure of the CS and altered the crystallinity index and surface hydrophobicity of the CS, thereby affecting the AD process. The presence of CIP pretreatment increased the initial reducing sugar concentration by 0.11-0.27 g/L and increased the maximum volatile fatty acids content by 112.82-436.64 mg/L, which facilitated the process of acidification and hydrolysis of the AD. It was also observed that the CIP pretreatment maintained the pH in the range of 6.37-7.30, maintaining the stability of the overall system. Moreover, the cumulative methane production in the CIP pretreatment group increased by 27.17 %-64.90 % compared to the control group. Analysis of the microbial results showed that CIP pretreatment increased the abundance of cellulose degrading bacteria Ruminofilibacter from 21.50 % to 27.53 % and acetoclastic methanogen Methanosaeta from 45.48 % to 56.92 %, thus facilitating the hydrolysis and methanogenic stages. The energy conversion analysis showed that CIP is a green and non-polluting pretreatment strategy for the efficient AD of CS to methane.

Contribution of the bacterial community of poorly fermented oat silage to biogas emissions on the Qinghai Tibetan Plateau

To better utilize poorly fermented oat silage on the Qinghai Tibetan Plateau, 239 samples of this biomass were collected from the plateau temperate zone (PTZ), plateau subboreal zone (PSBZ), and nonplateau climatic zone (NPCZ) in the region and analyzed for microbial community, chemical composition and in vitro gas production. Climatic factors affect the bacterial α-diversity and β-diversity of poorly fermented oat silage, which led to the NPCZ having the highest relative abundance of Lactiplantibacillus plantarum. Furthermore, the gas production analysis showed that the NPCZ had the highest maximum cumulative gas emissions of methane. Through structural equation modeling analysis, environmental factors (solar radiation) affected methane emissions via the regulation of lactate production by L. plantarum. The enrichment of L. plantarum contributes to lactic acid production and thereby enhances methane emission from poorly fermented oat silage. Notably, there are many lactic acid bacteria detrimental to methane production in the PTZ. This knowledge will be helpful in revealing the mechanisms of environmental factors and microbial relationships influencing the metabolic processes of methane production, thereby providing a reference for the clean utilization of other poorly fermented silage.

Advances in understanding entire process of medium chain carboxylic acid production from organic wastes via chain elongation

Chain elongation is an environmentally friendly biological technology capable of converting organic wastes into medium chain carboxylic acids (MCCAs). This review aims to offer a comprehensive analysis of MCCA production from organic wastes via chain elongation. Seven kinds of organic wastes are introduced and classified as easily degradable and hardly degradable. Among them, food waste, fruit and vegetable waste are the most potential organic wastes for MCCA production. Combined pretreatment technologies should be encouraged for the pretreatment of hardly degradable organic wastes. Furthermore, the mechanisms during MCCA production are analyzed, and the key influencing factors are evaluated, which affect the MCCA production and chain elongation efficiency indirectly. Extracting MCCA simultaneously is the most important way to improve MCCA production efficiency, and technologies for sequentially extracting different kinds of MCCAs are recommended. Finally, some perspectives for future chain elongation researches are proposed to promote the large-scale application of chain elongation.

Biodegradation of willow sawdust by novel cellulase-producing bacterial consortium from wood-feeding termites for enhancing methane production

This study was designed to develop a cellulase-producing bacterial consortium (CBC) from wood-feeding termites that could effectively degrade willow sawdust (WSD) and consequently enhance methane production. The bacterial strains Shewanella sp. SSA-1557, Bacillus cereus SSA-1558, and Pseudomonas mosselii SSA-1568 exhibited significant cellulolytic activity. Their CBC consortium showed positive effects on cellulose bioconversion, resulting in accelerated WSD degradation. After nine days of pretreatment, the WSD had lost 63%, 50%, and 28% of its cellulose, hemicellulose, and lignin, respectively. The hydrolysis rate of treated WSD (352 mg/g) was much higher than that of untreated WSD (15.2 mg/g). The highest biogas production (66.1 NL/kg VS) with 66% methane was observed in the anaerobic digester M-2, which contained a combination of pretreated WSD and cattle dung in a 50/50 ratio. The findings will enrich knowledge for the development of cellulolytic bacterial consortia from termite guts for biological wood pretreatment in lignocellulosic anaerobic digestion biorefineries.

Lignocellulose degradation by rumen bacterial communities: New insights from metagenome analyses

Ruminant animals house a dense and diverse community of microorganisms in their rumen, an enlarged compartment in their stomach, which provides a supportive environment for the storage and microbial fermentation of ingested feeds dominated by plant materials. The rumen microbiota has acquired diverse and functionally overlapped enzymes for the degradation of plant cell wall polysaccharides. In rumen Bacteroidetes, enzymes involved in degradation are clustered into polysaccharide utilization loci to facilitate coordinated expression when target polysaccharides are available. Firmicutes use free enzymes and cellulosomes to degrade the polysaccharides. Fibrobacters either aggregate lignocellulose-degrading enzymes on their cell surface or release them into the extracellular medium in membrane vesicles, a mechanism that has proven extremely effective in the breakdown of recalcitrant cellulose. Based on current metagenomic analyses, rumen Bacteroidetes and Firmicutes are categorized as generalist microbes that can degrade a wide range of polysaccharides, while other members adapted toward specific polysaccharides. Particularly, there is ample evidence that Verrucomicrobia and Spirochaetes have evolved enzyme systems for the breakdown of complex polysaccharides such as xyloglucans, peptidoglycans, and pectin. It is concluded that diversity in degradation mechanisms is required to ensure that every component in feeds is efficiently degraded, which is key to harvesting maximum energy by host animals.

Characterization of the Dynamic Changes of Ruminal Microbiota Colonizing Citrus Pomace Waste during Rumen Incubation for Volatile Fatty Acid Production

Rumen microorganisms are promising for efficient bioconversion of lignocellulosic wastes to biofuels and industrially relevant products. Investigating the dynamic changes of the rumen microbial community colonizing citrus pomace (CtP) will advance our understanding of the utilization of citrus processing waste by rumen fluid. Citrus pomace in nylon bags was incubated in the rumen of three ruminally cannulated Holstein cows for 1, 2, 4, 8, 12, 24, and 48 h. Results showed that total volatile fatty acids concentrations and proportions of valerate and isovalerate were increased over time during the first 12 h. Three major cellulose enzymes attached to CtP rose initially and then decreased during the 48-h incubation. Primary colonization happened during the initial hours of CtP incubation, and microbes compete to attach CtP for degrading easily digestible components and/or utilizing the waste. The 16S rRNA gene sequencing data revealed the diversity and structure of microbiota adhered to CtP were distinctly different at each time point. The increased abundance of Fibrobacterota, Rikenellaceae_RC9_gut_group, and Butyrivibrio may explain the elevated volatile fatty acids concentrations. This study highlighted key metabolically active microbial taxa colonizing citrus pomace in a 48-h in situ rumen incubation, which could have implications for promoting the biotechnological process of CtP. IMPORTANCE As a natural fermentation system, the rumen ecosystem of ruminants can efficiently degrade plant cellulose, indicating that the rumen microbiome offers an opportunity for anaerobic digestion to utilize biomass wastes containing cellulose. Knowledge of the response of the in situ microbial community to citrus pomace during anaerobic fermentation will help improve the current understanding of citrus biomass waste utilization. Our results demonstrated that a highly diverse rumen bacterial community colonized citrus pomace rapidly and continuously changed during a 48-h incubation period. These findings may provide a deep understanding of constructing, manipulating, and enriching rumen microorganisms to improve the anaerobic fermentation efficiency of citrus pomace.

Characterization of bovine ruminal content focusing on energetic potential use and valorization opportunities

This work characterized the bovine ruminal content excluding stomach tissue obtained from a slaughterhouse plant located in Cordoba, Colombia. The goal is to establish possible energetic uses and valorization potential instead of risky local current contaminant practices. Samples of ruminal content (RC) were collected under two conditions as-fresh and dry. Microbiological and bromatological quality, density, proximate and elemental analysis, and calorific power values were measured. There were complemented with optical microscopy, SEM, XEDS, FTIR, TGA, and TGA-MS analysis for both conditions. Ashes of combustion products from mixtures of natural gas and RC were studied, using XRD and XRF techniques. Results showed that fresh-state RC has an important microbiological quality without some human risk pathogens, such as Salmonella sp, E. coli, and vegetable risk pathogens, such as nematodes. Dry and sieved state RC is lignin-cellulosic heterogeneous biomass, with a real density of 164 kg/m³, a calorific power between 12 and 15 kJ/kg, and ashes rich in alkaline-earth elements. These results indicate that RC might have a good potential in co-combustion, gasification, and other energy processes. However, important considerations should be done about management of RC, because its direct application as fertilizer could carry out a negative effect, which was demonstratred in the growth of a model plant.

Waste to catalyst: Role of agricultural waste in water and wastewater treatment

Presently, owing to the rapid development of industrialization and urbanization activities, a huge quantity of wastewater is generated that contain toxic chemical and heavy metals, imposing higher environmental jeopardies and affecting the life of living well-being and the economy of the counties, if not treated appropriately. Subsequently, the advancement in sustainable cost-effective wastewater treatment technology has attracted more attention from policymakers, legislators, and scientific communities. Therefore, the current review intends to highlight the recent development and applications of biochars and/or green nanoparticles (NPs) produced from agricultural waste via green routes in removing the refractory pollutants from water and wastewater. This review also highlights the contemporary application and mechanism of biochar-supported advanced oxidation processes (AOPs) for the removal of organic pollutants in water and wastewater. Although, the fabrication and application of agriculture waste-derived biochar and NPs are considered a greener approach, nevertheless, before scaling up production and application, its toxicological and life-cycle challenges must be taken into account. Furthermore, future efforts should be carried out towards process engineering to enhance the performance of green catalysts to improve the economy of the process.

Algal biomass to biohydrogen: Pretreatment, influencing factors, and conversion strategies

Hydrogen has gained attention as an alternative source of energy because of its non-polluting nature as on combustion it produces only water. Biological methods are eco-friendly and have benefits in waste management and hydrogen production simultaneously. The use of algal biomass as feedstock in dark fermentation is advantageous because of its low lignin content, high growth rate, and carbon-fixation ability. The major bottlenecks in biohydrogen production are its low productivity and high production costs. To overcome these issues, many advances in the area of biomass pretreatment to increase sugar release, understanding of algal biomass composition, and development of fermentation strategies for the complete recovery of nutrients are ongoing. Recently, mixed substrate fermentation, multistep fermentation, and the use of nanocatalysts to improve hydrogen production have increased. This review article evaluates the current progress in algal biomass pretreatment, key factors, and possible solutions for increasing hydrogen production.

Biochar application for greenhouse gas mitigation, contaminants immobilization and soil fertility enhancement: A state-of-the-art review

Rising global temperature, pollution load, and energy crises are serious problems, recently facing the world. Scientists around the world are ambitious to find eco-friendly and cost-effective routes for resolving these problems. Biochar has emerged as an agent for environmental remediation and has proven to be the effective sorbent to inorganic and organic pollutants in water and soil. Endowed with unique attributes such as porous structure, larger specific surface area (SSA), abundant surface functional groups, better cation exchange capacity (CEC), strong adsorption capacity, high environmental stability, embedded minerals, and micronutrients, biochar is presented as a promising material for environmental management, reduction in greenhouse gases (GHGs) emissions, soil management, and soil fertility enhancement. Therefore, the current review covers the influence of key factors (pyrolysis temperature, retention time, gas flow rate, and reactor design) on the production yield and property of biochar. Furthermore, this review emphasizes the diverse application of biochar such as waste management, construction material, adsorptive removal of petroleum and oil from aqueous media, immobilization of contaminants, carbon sequestration, and their role in climate change mitigation, soil conditioner, along with opportunities and challenges. Finally, this review discusses the evaluation of biochar standardization by different international agencies and their economic perspective.

One pot bioprocessing in lignocellulosic biorefinery: A review

Practically, high-yield conversion of biomass into value-added products at low cost is a primary goal for any lignocellulosic refinery. In the industrial context, the limitation in the practical adaptation of the conventional techniques practically involves multiple reactors for the conversion of biomass to bioproducts. Therefore, the present manuscript critically reviewed the advancements in one-pot reaction systems with a major focus on the scientific production of value-added products from lignocellulosic biomass. In view of that, the novelty of one-pot reactions is shown during the fractionation of biomass into their individual constituents. The importance of the direct conversion of cellulose and lignin into a range of valuable products including organic acids and platform chemicals are separately discussed. Finally, the article is concluded with the opportunities, existing troubles, and possible solutions to overcome the challenges in lignocellulosic biorefinery. This article will assist the readers to identify the economic-friendly-one-pot conversion of lignocellulosic biomass.

Biomimicry of ruminant digestion strategies for accelerating lignocellulose bioconversion in anaerobic digestion

Biomimicking ruminant digestion strategies (RDSs) into anaerobic digestion (AD) enables efficient bioconversion of lignocellulosic biomass. Understanding RDSs is essential to translate their features into designing and developing bioprocesses and bioreactors. Here, we discuss insights into recently developed bioinspired bioprocesses, bioreactors, and future AD systems based on RDSs.

Diversity of growth performance and rumen microbiota vary with feed types

Diet is a major factor in influencing the growth performance and the microbial community of lambs. This study aimed to investigate how diverse diets influence their growth performance and rumen microbiota. Ninety male lambs were randomly allocated into three groups in a completely randomized design with equal lambs: non-pelleted native grass hay (HA) as the control diet and pelleted native grass hay (GP) and pelleted native grass hay with concentrate (GPC) as experimental diets. The rumen fluid samples of the lambs in the HA, GP, and GPC groups were used to study rumen microbiota diversity through 16S rDNA high-throughput sequencing. In the present study, the final body weight, dry matter intake, and average daily gain differed significantly (p &lt; 0.05) among the HA, GP, and GPC groups. Compared to the HA group, higher final body weight, dry matter intake, and average daily gain were found in the GP group. Similarly, better animal performance was observed in the GPC group than in the GP group. The principal coordinates analysis displayed that the composition of the rumen microbiota in the three groups was distinctly separated from each other. Bacteroidetes and Firmicutes were the dominant members of the community in the HA and GP groups, while Bacteroidetes, Firmicutes, and Proteobacteria became the predominant members in the GPC group. The comparison among these groups showed significant (p &lt; 0.05) differences in Rikenellaceae_RC9_gut_group, Prevotella_1, Ruminococcaceae_NK4A214_group, and Succiniclasticum. These results suggest that the GP and GPC diets are more beneficial for growth performance than the HA diet and also indicate that the rumen microbiota varied in response to different feed types. In conclusion, these results could provide strategies to influence rumen microbiota for better growth and a healthier ecosystem on the Mongolian Plateau and lay the theoretical groundwork for feeding the pelleted native grass diet.

Sustainable biopolyol production via solvothermal liquefaction silvergrass saccharification residue: Experimental, economic, and environmental approach

With the rising environmental concern, sustainable chemistry should be accomplished by considering technical, economic, and environmental factors that guarantee the successful implementation of new alternative products. Hence, we performed the integrated techno-economic and life cycle assessment for two-step solvothermal liquefaction (two-pot synthesis) and simplified solvothermal liquefaction (one-pot synthesis) based on experiment results. Based on the itemized cost estimation, the unit biopolyol production costs obtained from the two-pot synthesis and one-pot synthesis were 10.0 $ kg^-1 and 2.89 $ kg^-1, respectively. To provide techno-economic guidelines for biopolyol production, profitability analysis, and uncertainty analysis were used to identify the economic feasibility of the proposed processes. In addition, the life cycle assessment results indicated that biopolyol production via the two-pot synthesis leads to a slightly lower greenhouse gas emission compared with the one-pot synthesis, which further required the use of an analytic hierarchy process to determine the best process for biopolyol production depending on the different weight points in the economic and environmental aspects. From these results, we can provide the technical performance, economic feasibility, and environmental impact of lab-scale biopolyol production from silvergrass residue, a low-cost waste of biomass saccharification.

Inhibitor formation and detoxification during lignocellulose biorefinery: A review

For lignocellulose biorefinery, pretreatment is needed to maximize the cellulose accessibility, frequently generating excess inhibitory substances to decline the efficiency of the subsequent fermentation processes. This mini-review updates the current research efforts to detoxify the adverse impacts of generated inhibitors on the performance of biomass biorefinery. The lignocellulose pretreatment processes are first reviewed. The generation of inhibitors, furans, furfural, phenols, formic acid, and acetic acid, from the lignocellulose, with their action mechanisms, are listed. Then the detoxification processes are reviewed, from which the biological detoxification processes are noted as promising and worth further study. The challenges and prospects for applying biological detoxification in lignocellulose biorefinery are outlined. Integrated studies considering the entire biorefinery should be performed on a case-by-case basis.

Mobilization of contaminants: Potential for soil remediation and unintended consequences

Land treatment has become an essential waste management practice. Therefore, soil becomes a major source of contaminants including organic chemicals and potentially toxic elements (PTEs) which enter the food chain, primarily through leaching to potable water sources, plant uptake, and animal transfer. A range of soil amendments are used to manage the mobility of contaminants and subsequently their bioavailability. Various soil amendments, like desorbing agents, surfactants, and chelating agents, have been applied to increase contaminant mobility and bioavailability. These mobilizing agents are applied to increase the contaminant removal though phytoremediation, bioremediation, and soil washing. However, possible leaching of the mobilized pollutants during soil washing is a major limitation, particularly when there is no active plant uptake. This leads to groundwater contamination and toxicity to plants and soil biota. In this context, the present review provides an overview on various soil amendments used to enhance the bioavailability and mobility of organic and inorganic contaminants, thereby facilitating increased risk when soil is remediated in polluted areas. The unintended consequences of the mobilization methods, when used to remediate polluted sites, are discussed in relation to the leaching of mobilized contaminants when active plant growth is absent. The toxicity of targeted and non-targeted contaminants to microbial communities and higher plants is also discussed. Finally, this review work summarizes the existing research gaps in various contaminant mobilization approaches, and prospects for future research.

Multifunctional applications of bamboo crop beyond environmental management: an Indian prospective

Increasing population, industrialization, and economic growth cause several adverse impacts on the existing environment and living being. Therefore, rising pollutants load and their mitigation strategies, as well as achieving energy requirements while reducing reliance on fossil fuels are the key areas, which needs significant consideration for sustainable environment. Since India has considerable biomass resources, bioenergy is a significant part of the country’s energy policy. However, the selection of feedstock is a crucial step in bioenergy production that could produce raw material without compromising food reserve along with the sustainable environment. Higher growth capacity of bamboo species makes them a suitable lignocellulosic substrate for the production of high-value greener products such as fuels, chemicals, and biomaterials as well as an appropriate candidate for eco-restoration of degraded land. In that context, the current review discusses the multidimensional applications of bamboo species in India. The bioenergy potency of bamboo and probability of aligning its production, cultivation, and operation with economic and social development agendas are also addressed, making it an exceptional crop in India. Additionally, its fast growth, perennial root systems, and capability to restore degraded land make it an essential part of ecological restoration. Furthermore, this review explores additional benefits of bamboo plantation on the environment, economy, and society along with future research prospects.

Lignocellulosic Materials for the Production of Biofuels, Biochemicals and Biomaterials and Applications of Lignocellulose-Based Polyurethanes: A Review

The present review is devoted to the description of the state-of-the-art techniques and procedures concerning treatments and modifications of lignocellulosic materials in order to use them as precursors for biomaterials, biochemicals and biofuels, with particular focus on lignin and lignin-based products. Four different main pretreatment types are outlined, i.e., thermal, mechanical, chemical and biological, with special emphasis on the biological action of fungi and bacteria. Therefore, by selecting a determined type of fungi or bacteria, some of the fractions may remain unaltered, while others may be decomposed. In this sense, the possibilities to obtain different final products are massive, depending on the type of microorganism and the biomass selected. Biofuels, biochemicals and biomaterials derived from lignocellulose are extensively described, covering those obtained from the lignocellulose as a whole, but also from the main biopolymers that comprise its structure, i.e., cellulose, hemicellulose and lignin. In addition, special attention has been paid to the formulation of bio-polyurethanes from lignocellulosic materials, focusing more specifically on their applications in the lubricant, adhesive and cushioning material fields. High-performance alternatives to petroleum-derived products have been reported, such as adhesives that substantially exceed the adhesion performance of those commercially available in different surfaces, lubricating greases with tribological behaviour superior to those in lithium and calcium soap and elastomers with excellent static and dynamic performance.