Review of thermal treatments for the degradation of dioxins in municipal solid waste incineration fly ash: Proposing a suitable method for large-scale processing

Regulatory compliance of PCDD/F emissions by a municipal solid waste incinerator. A case study in Sant Adrià de Besòs, Catalonia, Spain

Despite incineration is an important emission source of toxic pollutants, such as heavy metals and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), it is still one of the most widely used methods for the management of municipal solid waste. The current paper summarizes the results of a 20-year follow-up study of the emissions of PCDD/Fs by a municipal solid waste incinerator (MSWI) in Sant Adrià de Besòs (Catalonia, Spain). Samples of ambient air, soils and herbage were periodically collected near the facility and the content of PCDD/Fs was analyzed. In the last (2017) survey, mean levels in soil were 3.60 ng WHO-TEQ/kg (range: 0.40-10.6), being considerably higher than the mean concentrations of PCDD/Fs in soil samples collected near other MSWIs in Catalonia. Moreover, air PCDD/F concentrations were even higher than those found in a previous (2014) survey, as they increased from 0.026 to 0.044 pg WHO-TEQ/m3. Ultimately, the PCDD/F exposure would be associated to a cancer risk (2.5 × 10-6) for the population living in the surrounding area. Globally, this information indicates that the MSWI of Sant Adrià de Besòs could have had a negative impact on the environment and potentially on public health, being an example of a possible inappropriate management for years. The application of Best Available Techniques to minimize the emission of PCDD/Fs and other chemicals is critical.

Co-incineration of medical waste in municipal solid waste incineration increased emission of chlorine/brominated organic pollutants

Co-incineration of medical waste (MW) in municipal solid waste incinerators (MSWIs) is a crucial disposal method for emergency disposal of MW and the management of MW in small and medium-sized towns. This study aims to analyze and compare the levels and distribution patterns of chlorine/brominated dioxins and their precursors in fly ash from MSWIs and medical waste incinerators (MWIs) while also focusing on identifying the new pollution concerns that may arise from the co-incineration of municipal solid waste (MSW) mixed with MW (MSW/MW). The concentration of chlorobenzene (CBzs), polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) in fly ash from co-incineration of MSW/MW are 887.4, 134.4 and 27.6 μg/kg, respectively, which are 5.1, 2.0 and 2.9 times higher than that from MSWIs. The levels of polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) are about three orders of magnitude lower than that of PCDD/Fs. For the fly ash from MSWIs, the predominant PCDD/Fs congener is OCDD, which prefers synthesis and adsorption on fine-grained fly ash. For fly ash from MWIs, the major PCDD/Fs congeners are 1, 2, 3, 4, 6,7, 8-HpCDF, and OCDF, which prefer synthesis and adsorption on coarse-grained fly ash. Correlation analysis exhibited that both 1,2,3-TriCBz and 1,2,4-TriCBz in fly ash have a markedly linear correlation with PCDD/Fs and PCBs, but PBDD/Fs shows a poor negative correlation with PCDD/Fs.

Toxicity assessment of dioxins and their transformation by-products from inferred degradation pathways

Due to the significant POPs characteristics, dioxins caused concern in public health and environmental protection. Evaluating the toxicity risk of dioxin degradation pathways is critical. OCDD, 1,2,3,4,6,7,8-HpCDD, and 1,2,3,4,6,7,8-HpCDF, which are highly abundant in the environment and have strong biodegradation capabilities, were selected as precursor molecules in this study. Firstly, their transformation pathways were deduced during the metabolism of biometabolism, microbial aerobic, microbial anaerobic, and photodegradation pathways, and density function theory (DFT) was used to calculate the Gibbs free energy to infer the possibility of the occurrence of the transformation pathway. Secondly, the carcinogenic potential of the precursors and their degradation products was evaluated using the TOPKAT modeling method. With the help of the positive indicator (0-1) normalization method and heat map analysis, a significant increase in the toxic effect of some of the transformation products was found, and it was inferred that it was related to the structure of the transformation products. Meanwhile, the strength of the endocrine disrupting effect of dioxin transformation products was quantitatively assessed using molecular docking and subjective assignment methods, and it was found that dioxin transformation products with a higher content of chlorine atoms and molecules similar to those of thyroid hormones exhibited a higher risk of endocrine disruption. Finally, the environmental health risks caused by each degradation pathway were comprehensively assessed with the help of the negative indicator (1-2) standardization method, which provides a theoretical basis for avoiding the toxicity risks caused by dioxin degradation transformation. In addition, the 3D-QSAR model was used to verify the necessity and rationality of this study. This paper provides theoretical support and reference significance for the toxicity assessment of dioxin degradation by-products from inferred degradation pathways.

Insects to the rescue? Insights into applications, mechanisms, and prospects of insect-driven remediation of organic contaminants

Traditional and emerging contaminants pose significant human and environmental health risks. Conventional physical, chemical, and bioremediation techniques have been extensively studied for contaminant remediation. However, entomo- or insect-driven remediation has received limited research and public attention. Entomo-remediation refers to the use of insects, their associated gut microbiota, and enzymes to remove or mitigate organic contaminants. This novel approach shows potential as an eco-friendly method for mitigating contaminated media. However, a comprehensive review of the status, applications, and challenges of entomo-remediation is lacking. This paper addresses this research gap by examining and discussing the evidence on entomo-remediation of various legacy and emerging organic contaminants. The results demonstrate the successful application of entomo-remediation to remove legacy organic contaminants such as persistent organic pollutants. Moreover, entomo-remediation shows promise in removing various groups of emerging contaminants, including microplastics, persistent and emerging organic micropollutants (e.g., antibiotics, pesticides), and nanomaterials. Entomo-remediation involves several insect-mediated processes, including bio-uptake, biotransfer, bioaccumulation, and biotransformation of contaminants. The mechanisms underlying the biotransformation of contaminants are complex and rely on the insect gut microbiota and associated enzymes. Notably, while insects facilitate the remediation of contaminants, they may also be exposed to the ecotoxicological effects of these substances, which is often overlooked in research. As an emerging field of research, entomo-remediation has several knowledge gaps. Therefore, this review proposes ten key research questions to guide future perspectives and advance the field. These questions address areas such as process optimization, assessment of ecotoxicological effects on insects, and evaluation of potential human exposure and health risks.

Photodegradation of 2-chlorodibenzo-p-dioxin (2-CDD) on the surface of municipal solid waste incineration fly ash: Kinetics and product analysis

Considering that waste incineration fly ash is the main carrier of dioxins and can migrate over long distances in the atmosphere, it is of great significance to study the photochemical transformation behavior of dioxins on the surface of fly ash. In this work, 2-chlorodibenzo-p-dioxin (2-CDD) was selected to conduct a systematic photochemical study. The influence of various factors on the photodegradation of 2-CDD were first explored, and the results showed that small particle size of fly ash, low concentration of 2-CDD and appropriate level of humidity were more conducive to photodegradation, with the highest degradation percentage reaching 76%-84%. The components of fly ash (Zn (Ⅱ), Al (Ⅲ), Cu (Ⅱ) and SiO2) also had a certain promoting effect on the degradation of 2-CDD, which increases the degradation efficiency by 10%-20%, because they could act as effective photocatalysts to produce free radicals for reaction. With a higher total light exposure intensity, natural light environments led to a more complete degradation of 2-CDD than laboratory Xe lamp irradiation (90% degradation Vs. 79% degradation). Based on chemical probe and radical quenching experiment, hydroxyl radical also contributed to 2-CDD photodegradation on fly ash. A total of 16 intermediate products were detected by mass spectrometry analysis, and four initial reaction pathways of 2-CDD were speculated in the process, including dechlorination, ether bond cleavage, hydroxyl substitution, and hydroxyl addition. According to the results of density functional theory calculation, the reaction channels of ether bond cleavage and •OH attack were determined. The toxicity assessment software tool (TEST) was used to assess the toxicity and bioconcentration coefficient of reaction products, and it was found that the overall toxicity of the photodegradation products was reduced. This study would provide new insights into the environmental fate of dioxins during long-range atmospheric migration process.

Investigation of waste alkali-activated cementing material using municipal solid waste incineration fly ash and dravite as precursors: Mechanisms, performance, and on-site application

The proper treatment of municipal solid waste incineration fly ash (MSWIFA) is a crucial concern due to its hazardous nature and potential environmental harm. To address this issue, this study innovatively utilized dravite and black liquor to solidify MSWIFA. The semi-dry pressing method was employed, resulting in the production of waste alkali-activated cementing material (WACM). This material demonstrated impressive compressive and flexural strength, reaching 45.89 MPa and 6.55 MPa respectively, and effectively solidified heavy metal ions (Pb, Cr, Cu, Cd, and Zn). The leaching concentrations of these ions decreased from 27.15, 10.36, 8.94, 7.00, and 104.4 mg/L to 0.13, 1.05, 0.29, 0.06, and 12.28 mg/L, respectively. The strength of WACM increased by 3 times compared to conventionally produced materials. Furthermore, WACM exhibited excellent long-term performance, with acceptable heavy metal leaching and minimal mechanical degradation. Experimental and theoretical analyses revealed the heavy metal solidification mechanisms, including chemical binding, ion substitution and physical encapsulation. Finally, the on-site application of WACM confirmed its feasibility in meeting both environmental and strength requirements.

Fate of Cl and chlorination mechanism during municipal solid waste incineration fly ash reutilization using thermal treatment: a review

Safe and sustainable treatment of municipal solid waste incineration fly ash (MSWI FA) is urgently needed worldwide because of its high heavy metals, dioxin, and chlorine (Cl) contents. Thermal treatment is widely considered as a promising method for treating MSWI FA owing to its high toxic content removal efficiency and resource recovery; however, residual Cl is a concurrent critical problem faced during reutilisation of thermal treatment products. This review summarises the innovative thermal treatment methods of MSWI FA, such as those employed in production of cement, lightweight aggregates, glass slag, and metal alloys. The characteristics of Cl in MSWI FA, removal rate, transformation of water-soluble Cl into water-insoluble Cl, and the effect of different influencing factors such as temperature, composition, superheated steam, and mechanical pressure were analysed. The volatilization and decomposition of NaCl, KCl and CaClOH dominates Cl removal; however, the degradation of organic Cl and heavy metal chlorination volatilization process that generate HCl and heavy metal chlorides, respectively, also contributed to Cl removal. To promote the reutilisation of MSWI FA-based products, the leaching behaviour of residual Cl in products obtained by different thermal treatments was investigated.

Novel cost-effective oxygen-enriched melting method for MSWI fly ash

Herein, a novel oxygen- enriched melting process for fly ash, which uses the biogas produced from the leachate of municipal solid waste incineration (MSWI) plants, is proposed to reduce the high cost of conventional fly ash - melting technology. The fly ash composition was estimated via X-ray fluorescence analysis; the six constituent elements detected in fly ash in the decreasing order of their content were calcium, chlorine, silicon, sulfur, sodium, and potassium. Based on literature and actual production data, the average yield of the leachate was 15% of the total waste entering the MSWI plants and the COD of leachate was 30,000-75,000 mg/L. The amount of biogas that can be used per ton of fly ash was calculated to be 62.0-157.0 m3. The analysis of melting thermal equilibrium revealed the amount of biogas required per ton of fly ash as 57.8 m3. The aforementioned research findings indicate that the biogas produced by MSWI plants can successfully meet the demands of the oxygen- enriched melting of fly ash produced in these plants. By establishing an oxygen- enriched- melting pilot platform, the pilot tests of melting were conducted on fly ash; the results revealed the good melting effects of fly ash. The X-ray diffraction analysis of the slag demonstrated that the content of the vitreous body met the technical requirements for glassy substances. Furthermore, the leaching toxicity test results revealed that heavy metals were well solidified in the slag. This study presents a novel fly ash - melting scheme for MSWI fly ash, namely, biogas oxygen- enriched melting strategy, which has the advantages of technical feasibility and cost- effectiveness. The proposed technique exhibits considerable prospects for widespread application in MSWI plants in China and can play an important role in the safe disposal of fly ash.Implications: In this paper, a low- cost melting method of municipal solid waste incineration(MSWI) fly ash is proposed. This method uses the biogas generated by MSWI plant itself as fuel for melting. Through research, it has been found that the production of biogas can meet the demand for fly ash melting. Adopting biogas as a molten fuel can significantly reduce the cost of melting, thereby significantly reducing the cost of fly ash melting. This study established a pilot scale platform for the melting of biogas and conducted pilot scale experiments on fly ash and additives. The experimental results showed that the melting system operated well and achieved the vitrification of fly ash. The leaching test results of the molten slag showed that heavy metals were well solidified in the slag. The research results can be extended to the MSWI plant for application, which can significantly reduce the cost of fly ash melting disposal, and has broad application prospects.