In vivo performance of near-infrared light transillumination for dentine proximal caries detection in permanent teeth

Accuracy of an intraoral scanner with near-infrared imaging feature in detection of interproximal caries of permanent teeth: An in vivo validation

OBJECTIVE

This study aimed to evaluate the accuracy of an intraoral scanner with near-infrared imaging (NIRI) feature in the diagnosis of interproximal caries and to compare it with the visual-tactile method (VTM), bitewing radiography (BWR), and panoramic radiography (PR).

MATERIALS AND METHODS

Six hundred thirty-nine interproximal surfaces (mesial-distal) of posterior teeth from 22 volunteers were examined. Results were scored by VTM, BWR, PR, and NIRI. Lesions were scored as 0 for no-caries, 1 for early-enamel lesion (EEL), and 2 for lesions involving dentino-enamel junction (DEJ). McNemar, Kappa, and Fleis Kappa tests were used to evaluate the agreement levels. Pearson's Chi-square test was used to determine the matching rates after validation.

RESULTS

A good level of agreement was observed between examination methods (Ƙ = 0.613; p < 0.001). In pairwise comparisons, a moderate agreement was seen between all the methods for lesions with DEJ involvement, while a statistically good agreement was observed between BWR and NIRI (Ƙ = 0.675; p < 0.001). As a result of validation, the accuracy of NIRI for molars was considered 85.2% and 75.7% for premolars in EELs, 85.2% for molars, and 70% for premolars regarding the lesions involving DEJ.

CONCLUSIONS

Intraoral scanners with the NIRI feature may be used for diagnosing interproximal caries, especially for permanent molars.

CLINICAL SIGNIFICANCE

Early detection of proximal caries is one of the most essential topics forming the basis of preventive dentistry. This study investigates a caries diagnostic tool integrated into intraoral scanners to diagnose interproximal caries. A caries diagnostic tool integrated into an intraoral scanner may prevent the harmful effects of ionizing radiation in early caries diagnosis and may improve the patient's oral health status.

Efficiency of Near-Infrared Technology in the Clinical Detection of Carious Lesions: A Systematic Review

The field of dentistry has seen various technological advances regarding caries detection, some lesions still prove to be difficult to detect. A reasonably new detection method, near-infrared (NIR), has shown good results in caries detection. This systematic review aims to compare NIR with conventional methods in terms of caries detection. Online databases (PubMed, Scopus, ScienceDirect, EBSCO, and ProQuest) were used for the literature search. The search was performed from January 2015 till December-2020. A total of 770 articles were selected, of that 17 articles qualified for the final analysis as per Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The articles were assessed according to a modified Critical Appraisal Skills Programme checklist, and then synthesis of the review started. The inclusion criteria were clinical trials done in vivo on teeth with active caries of vital or nonvital teeth. This review excluded nonpeer reviewed articles, case reports, case series, opinions, abstracts, non-English written articles, studies of subjects with arrested caries, or teeth with developmental defects of tooth structure and teeth having environmental defects of tooth structure, as well as in-vitro studies. The review compared near-infrared technology with radiography, visual inspection, and laser fluorescence in terms of caries detection, sensitivity, specificity, and accuracy. The sensitivity of NIR ranged from 99.1 to 29.1%. Studies showed that NIR exhibited higher sensitivity for occlusal enamel and dentin caries. The specificity of NIR ranged from 94.1 to 20.0%. In enamel and dentinal occlusal caries, NIR demonstrated lower specificity than that of radiograph. The specificity of NIR in early proximal caries was low. Accuracy was determined in 5 out of 17 studies where the values ranged from 97.1 to 29.1%. The accuracy of NIR was the highest for dentinal occlusal caries. NIR shows promising evidence as an adjunct in caries examination due to its high sensitivity and specificity; however, more studies are required to determine its full potential in different situations.

Effect of resin composite shade on digital fiber-optic transillumination imaging in vitro

Digital imaging fiber-optic transillumination (DIFOTI) devices have been used to detect caries, a technique without using X-rays. However, the effects of resin composites (RCs) shades on the images acquired with DIFOTI devices have not been investigated. Thus, this study aimed to elucidate the influence of RC shade on the images obtained with DIFOTI technique. Three shades (A1, A3, and Opaque) for each of four flowable RCs were filled on a cavity prepared in a left mandibular first premolar obtained from a donated body. Then, transmission images with a DIFOTI device (DIAGNOcam; KaVo, Biberach, Germany) were acquired, and the average lightness values of the images in the RC and enamel were used to calculate differences between those areas. To clarify the influence of the optical translucency and color on DIFOTI images, the color parameters (L*, a* and b*) of each RC were obtained with black and white backgrounds. The color differences between the backgrounds were calculated as transparency parameter (TP) values. The number of repetitions was set to 10. Differences in the lightness value of the shades varied in each RC. The difference in lightness was significantly associated with the TP value and color parameters of L* (p < 0.01), with negative (R = - 0.81) and positive (R = 0.84) correlations, respectively. In conclusion, DIFOTI images of RCs with high optical translucency resembled those of the natural tooth structure.

Use of Digital Diagnostic Aids for Initial Caries Detection: A Review

The advance in digital diagnostic technologies has significantly facilitated the detection of dental caries. Despite the increase in clinically available digital diagnostic aids for dental caries, there is yet to be a comprehensive summary of all available technology. This review aims to provide an overview of digital diagnostic aids for the clinical detection of dental caries, particularly those at an initial stage. Currently available digital diagnostic aids for caries detection can be classified into four categories according to the initial source of energy, including radiation-based aids, light-based aids, ultrasound-based aids, and electric-based aids. Radiation-based aids use ionizing radiation, normally X-ray, to produce images of dental structures. Radiation-based aids encompass digital bitewing radiography and cone beam computed tomography. Light-based aids employ light or laser to induce signals for the detection of the changes in the carious dental hard tissue. Common light-based aids include digital transillumination and light/laser-induced fluorescence. Ultrasound-based aids detect the signal of ultrasound waves to assess the acoustic impedance of the carious teeth. The ultrasound caries detector is an available ultrasound-based aid. Electric-based aids assess the changes in the electric current conductance or impedance of the teeth with caries. Available electric-based aids include electrical conductance measurement and alternating current impedance spectroscopy. Except for these clinically available digital diagnostic aids, many digital diagnostic aids for caries detection are still under development with promising results in laboratory settings.

Caries-preventing effect of a hydroxyapatite-toothpaste in adults: a 18-month double-blinded randomized clinical trial

Background

Dental caries is a worldwide challenge for public health. The aim of this 18-month double-blinded, randomized, clinical trial was to compare the caries-preventing effect of a fluoride-free, hydroxyapatite toothpaste (test) and a toothpaste with sodium fluoride (1450 ppm fluoride; positive control) in adults.

Methods

The primary endpoint was the percentage of subjects showing no increase in overall Decayed Missing Filled Surfaces (DMFS) index. The study was designed as non-inferiority trial. Non-inferiority was claimed if the upper limit of the exact one-sided 95% confidence interval for the difference of the primary endpoint DMFS between test and control toothpaste was less than the predefined margin of non-inferiority (Δ ≤ 20%).

Results

In total, 189 adults were included in the intention-to-treat (ITT) analysis; 171 subjects finished the study per protocol (PP). According to the PP analysis, no increase in DMFS index was observed in 89.3% of subjects of the hydroxyapatite group and 87.4% of the subjects of the fluoride group. The hydroxyapatite toothpaste was not statistically inferior to a fluoride toothpaste with regard to the primary endpoint.

Conclusion

Hydroxyapatite was proven to be a safe and efficient anticaries agent in oral care.

Clinical trial registration

NCT04756557.

Performance of Oral Cavity Sensors: A Systematic Review

Technological advancements are enabling new applications within biomedical engineering. As a connection point between the outer environment and the human system, the oral cavity offers unique opportunities for sensing technologies. This paper systematically reviews the performance of measurement systems tested in the human oral cavity. Performance was defined by metrics related to accuracy and agreement estimation. A comprehensive search identifying human studies that reported on the accuracy or agreement of intraoral sensors found 85 research papers. Most of the literature (62%) was in dentistry, followed by neurology (21%), and physical medicine and rehabilitation (12%). The remaining papers were on internal medicine, obstetrics, and aerospace medicine. Most of the studies applied force or pressure sensors (32%), while optical and image sensors were applied most widely across fields. The main challenges for future adoption include the lack of large human trials, the maturity of emerging technologies (e.g., biochemical sensors), and the absence of standardization of evaluation in specific fields. New research should aim to employ robust performance metrics to evaluate their systems and incorporate real-world evidence as part of the evaluation process. Oral cavity sensors offer the potential for applications in healthcare and wellbeing, but for many technologies, more research is needed.

Emerging Technologies for Dentin Caries Detection-A Systematic Review and Meta-Analysis

This systematic review and meta-analysis aimed at assessing the diagnostic accuracy of emerging technologies, such as laser fluorescence (LF), transillumination, light-emitting diode devices, optical coherence tomography (OCT), alternating current impedance spectroscopy, fluorescence cameras (FC), photo-thermal radiometry, and modulated luminescence technology. In vivo and in vitro results of such non-ionizing, non-invasive, and non-destructive methods' effectiveness in non-cavitated dentin caries detection are sometimes ambiguous. Following the PRISMA guidelines, 34 relevant research articles published between 2011-2021 were selected. The risk of bias was assessed with a tool tailored for caries diagnostic studies, and subsequent quantitative uni- and bi-variate meta-analysis was carried out in separate sub-groups according to the investigated surface (occlusal/proximal) and study setting (in vivo/in vitro). In spite of the high heterogeneity across the review groups, in vitro studies on LF and FC proved a good diagnostic ability for the occlusal surface, with area under the curve (AUC) of 0.803 (11 studies) and 0.845 (five studies), respectively. OCT studies reported an outstanding performance with an overall AUC = 0.945 (four studies). Promising technologies, such as OCT or FC VistaProof, still need well-designed and well-powered studies to accrue experimental and clinical data for conclusive medical evidence, especially for the proximal surface. Registration: INPLASY202210097.

Clinical Analysis of the Diagnostic Accuracy and Time of Execution of a Transillumination Caries Detection Method Compared to Bitewing Radiographs

Purposes: this clinical study evaluated the accuracy and execution time of a digital imaging fiber-optic transillumination (DIFOTI) technique for the detection of approximal caries in posterior teeth compared to intra-oral examination associated with bitewing radiographs. Methods: one hundred patients were selected and submitted to clinical inspection and bitewing radiographs. The outcomes of this process were converted into scores, according to the International Caries Detection and Assessment System (ICDAS): 0—sound tooth; 1, 2, and 3—carious lesion confined within enamel; 4, 5, and 6—dentin carious lesion. Subsequently, an independent investigator acquired digital images of the same teeth using a DIFOTI device (DIAGNOcam, Kavo Dental), which were also converted into ICDAS scores. The time required for executing diagnostic procedures was measured. The clinical sensitivity and specificity of DIFOTI were analyzed by receiver operating characteristic (ROC) curves. The time necessary to perform the diagnostic methods was evaluated by Mann–Whitney U (alfa = 0.05). Results: the overall test accuracy for the DIFOTI-based device ranged from 0.717 to 0.815 (area under the ROC curve) with p < 0.0001 for all ICDAS scores. Bitewing radiographs took almost twice the time required by DIFOTI (p < 0.001). Conclusions: the DIFOTI-based device DIAGNOcam provided accurate detection of approximal caries in posterior teeth, even at early stages. The technique employed for transillumination caries diagnosis by the same device took less time than conventional bitewing radiographs. Clinical Relevance: transillumination devices, such as DIAGNOcam, can be accurately used for caries diagnosis in approximal surfaces of posterior teeth, demanding less clinical time and without radiation-related risks.