Fabrication of MnO2/TiO2 nano-tube arrays photoelectrode and its enhanced visible light photoelectrocatalytic performance and mechanism

Charge transfer in TiO2-based photocatalysis: fundamental mechanisms to material strategies

Semiconductor-based photocatalysis has attracted significant interest due to its capacity to directly exploit solar energy and generate solar fuels, including water splitting, CO2 reduction, pollutant degradation, and bacterial inactivation. However, achieving the maximum efficiency in photocatalytic processes remains a challenge owing to the speedy recombination of electron-hole pairs and the limited use of light. Therefore, significant endeavours have been devoted to addressing these issues. Specifically, well-designed heterojunction photocatalysts have been demonstrated to exhibit enhanced photocatalytic activity through the physical distancing of electron-hole pairs generated during the photocatalytic process. In this review, we provide a systematic discussion ranging from fundamental mechanisms to material strategies, focusing on TiO2-based heterojunction photocatalysts. Current efforts are focused on developing heterojunction photocatalysts based on TiO2 for a variety of photocatalytic applications, and these projects are explained and assessed. Finally, we offer a concise summary of the main insights and challenges in the utilization of TiO2-based heterojunction photocatalysts for photocatalysis. We expect that this review will serve as a valuable resource to improve the efficiency of TiO2-based heterojunctions for energy generation and environmental remediation.

CdSe/TiO2NTs Heterojunction-Based Nonenzymatic Photoelectrochemical Sensor for Glucose Detection

Compared with a single semiconductor, the heterojunction formed by two different semiconductors usually has higher light utilization and better photoelectric performance. By using stable TiO2 nanotubes as the main subject, CdSe/TiO2NTs heterojunctions were synthesized by a hydrothermal method. XRD, TEM, SEM, PL, UV-vis, and EIS were used to characterize the fabricated CdSe/TiO2NTs. Under visible light irradiation, CdSe/TiO2NTs heterojunctions exhibited a higher absorption intensity and lower degree of photogenerated carrier recombination than TiO2. The electrons and holes were proven to be effectively separated in this heterojunction via theoretical calculation. Under CdSe/TiO2NTs' optimal conditions, the glucose concentrations (10-90 μM) had a linear relationship with the photocurrent value, and the detection limit was 3.1 μM. Moreover, the CdSe/TiO2NTs sensor exhibited good selectivity and stability. Based on the experimental data and theoretical calculations, its PEC sensing mechanism was also illuminated.

Steel slags for enhanced removal of landfill leachate in a three-dimensional electrochemical oxidation system

In this study, a three-dimensional electrochemical oxidation system, with steel slags as particle electrodes, was applied to deal with landfill leachate. The characteristics of particle electrodes were investigated by scanning electron microscope (SEM), X-ray fluorescence spectroscopy (XRF) and X-ray diffraction (XRD) measurements. It was found that the steel slag exhibited rough and irregular surface and mainly consisted of SiO2 (Quartz), which indicated the enhanced absorbed and electroconducted abilities. Subsequently, comparative degradation tests between two-dimensional (2D) and three-dimensional (3D) electrochemical oxidation systems were carried out and results indicated removal efficiencies of COD. Moreover, NH4+-N from landfill leachate in 3D system was greatly improved compared with that of 2D system. Besides, operating conditions were also optimized to interelectrode distance of 1 cm, current density of 20 mA·cm-2, initial pH value of 4.4 and steel slag concentration of 0.30 g·mL-1, all of which were determined to guarantee excellent landfill leachate removal efficiency. In addition, a possible removal mechanism for this system was proposed. The introduction of steel slag particle electrodes in three-dimensional electrochemical oxidation system implied the concept for "using waste to treat waste", providing a workable way in pollutant elimination.

Enhanced visible light driven photoelectrochemical degradation of tetracycline hydrochloride using a BiOI photoanode modified with MnO2 films

Removal of pharmaceuticals in wastewater has been the focus of many research due to the recalcitrant nature and hazardous effects of these compounds. The photoelectrochemical degradation process has proven to be suitable to harness solar energy for the mineralization of organic compounds in wastewater. Herein, we report the application of BiOI/MnO₂ heterostructured anode for the photoelectrochemical degradation of tetracycline hydrochloride in aqueous solution. The photoanode was prepared through electrodeposition technique and fully characterized through microscopic, spectroscopic and electrochemical techniques. The results showed that formation of p-n heterojunction between BiOI and MnO₂ in the photoanode led to improved charge separation which was evident in improved optical and photoelectrochemical properties. The FTO-BiOI/MnO₂ electrode attained a photocurrent density of 0.104 mA cm^-2 with applied potential of 1.0 V (vs Ag/AgCl) which was almost double that of pristine BiOI suggesting efficient charge separation. The heterostructured photoanode achieved 94% removal of tetracycline hydrochloride after 120 min through the PEC degradation process with 61% mineralization efficiency. The electrode showed good reusability and stability with 92% PEC removal after eight cycles. Hence, the FTO-BiOI/MnO₂ has a great potential as anode for PEC wastewater treatments.

CdS-Modified TiO2 Nanotubes with Heterojunction Structure: A Photoelectrochemical Sensor for Glutathione

The formation of heterojunction structures can effectively prevent the recombination of photogenerated electron-hole pairs in semiconductors and result in the enhancement of photoelectric properties. Using TiO₂ nanotubes (prepared using the hydrothermal-impregnation method) as carriers, CdS-TiO₂NTs were fabricated as a photoelectrochemical (PEC) sensor, which can be used under visible light and can exhibit good PEC performance due to the existence of the heterojunction structure. The experimental results show that the prepared CdS-TiO₂NTs electrode had a linear response to 2-16 mM glutathione (GSH). The sensor's sensitivity and detection limit (LOD) were 102.9 µA·mM^-1 cm^-2 and 27.7 µM, respectively. Moreover, the biosensor had good stability, indicating the potential application of this kind of heterojunction PEC biosensor.

The application of photoelectrocatalysis in the degradation of rhodamine B in aqueous solutions: a review

The pollution of the water environment by industrial effluents is an ongoing challenge due to the rate of industrialisation and globalisation. Photoelectrocatalysis (PEC), an electrochemical advanced oxidation process, has proven to be an effective method for removing organics from wastewater. Photoelectrocatalysis is environmentally benign, cost-effective and easy to operate. In this present review, we examine the recent progress in the removal of rhodamine B dye, a common constituent of textile effluent released into the environment, through photoelectrocatalytic degradation. We present a detailed discussion on the use of different kinds of unmodified and modified photoanodes that have been explored for the photoelectrocatalytic removal of this dye. More importantly, discussions are presented on the mechanisms and kinetics of the degradation of rhodamine B dye using these photoanodes. Hence, this review will be beneficial for researchers in developing future projects in the area of wastewater treatments through photoelectrocatalysis.

Facile preparation of MnO2-TiO2 nanotube arrays composite electrode for electrochemical detection of hydrogen peroxide

The MnO₂-TNTA composite electrodes were obtained through depositing MnO₂ into TiO₂ nanotube arrays (TNTA) by successive ionic layer adsorption reaction (SILAR) and subsequent hydrothermal method. The MnO₂-TNTA nanocomposites were used as electrochemical sensors for the detection of hydrogen peroxide (H₂O₂). The preparation conditions of MnO₂-TNTA electrodes and test conditions affect the electrochemical detection performance significantly. The optimal conditions are listed as follows: the number of SILAR cycles, 6 times; KMnO₄ solution temperature, 50 °C; supporting electrolyte, 0.5 M NaOH. Under these conditions, the MnO₂-TNTA electrode exhibits the best performance for detecting H₂O₂. The optimized MnO₂-TNTA electrode has a minimum detection limit of 0.6 μM (S/N = 3) and a linear range of 5 μM ∼ 13 mM, which is much superior to the previously-reported electrodes. Moreover, the optimized MnO₂-TNTA electrode possesses high selectivity, excellent stability and good reproducibility in the detection of H₂O₂. When used in the determination of H₂O₂ content in actual samples including disinfectant and milk, it also shows good accuracy, ideal recovery (96.00% ∼ 102.67%) and high precision (RSD < 4.0%).

Ti/TiO2 nanotubes sensitized PbS quantum dots as photoelectrodes applied for decomposition of anticancer drugs under simulated solar energy

One of the challenges in research into photoelectrocatalytic (PEC) degradation of pollutants is finding the appropriate photoanode material, which has a significant impact on the process efficiency. Among all others, photoelectrodes based on an ordered TiO₂ nanotube arrays are a promising material due to well-developed surface area and efficient charge separation. To increase the PEC activity of this material, the SILAR method was used to decorate Ti/TiO₂ nanotubes by PbS quantum dots (QD). The ifosfamide (IF) degradation rate constants was twice as higher for PbS-Ti/TiO₂ (0.0148 min^-1) than for Ti/TiO₂ (0.0072 min^-1). Our research showed the highest efficiency of PEC degradation of drugs using IIIPbS-Ti/TiO₂ made with 3 SILAR cycles (PbS QD size mainly 2-4 nm). The 4 and 6 of SILAR cycles resulted in the aggregation of PbS nanoparticles on the Ti/TiO₂ surface and decreased IF PEC degradation rate to 0.0043 and 0.0033 min^-1, respectively. Research on PEC mechanism has shown that the drugs are degraded mainly by the activity of photogenerated holes and hydroxyl radicals. In addition, the identified drug intermediates made possible to propose a degradation pathways of anticancer drugs and the ecotoxicity test show no inhibition of Lemna minor growth of treated solutions.

A carbon membrane-mediated CdSe and TiO2 nanofiber film for enhanced photoelectrochemical degradation of methylene blue

In this study, a carbon membrane-mediated CdSe and TiO₂ ternary film (CdSe/C/TiO₂) was prepared to degrade methylene blue (MB). Carbon membrane and CdSe were introduced to the surface of a TiO₂ nanofiber film via an in situ hydrothermal deposition process successively. The investigation shows that the carbon membrane not only provides a charge transfer channel to promote the transfer of electron from the conduction band of CdSe to that of TiO₂, but also improves the poor conduct between the TiO₂ film and electrolyte. The synergies between the carbon membrane and CdSe can make the ternary system harvest more visible light energy and facilitate the charge transfer property of TiO₂. The current density of CdSe/C/TiO₂ was about 9 folds higher compared with that of pure TiO₂ under UV and visible light irradiations. This ternary hybrid exhibits a superior activity during the photoelectrochemical (PEC) degradation of MB, and 92.43% can be removed after 120 min irradiation, which is improved by 21.14% than that of TiO₂.

A CdSe/C/TiO₂ nanofiber film was prepared for enhanced photoelectrochemical degradation ability, and carbon membrane as a carrier-transfer-channel could promote electron transfer.

Photoelectrocatalytic degradation of p-chloronitrobenzene by g-C3N4/TiO2 nanotube arrays photoelectrodes under visible light irradiation

As a typical refractory pollutant, p-chloronitrobenzene (p-CNB) from industrial wastewater poses a serious threat to the aquatic environment safety and human health. The photoelectrocatalytic (PEC) technology is regarded as a promising and cleaner approach for p-CNB removal. Therefore, the graphitic carbon nitride (g-C₃N₄) modified TiO₂ nanotube arrays (g-C₃N₄/TNAs) were prepared as the photoelectrodes for p-CNB degradation. The PEC degradation efficiency for p-CNB by g-C₃N₄/TNAs (0.00484 min^-1) was much higher than that by bare TNAs (0.00135 min^-1) under visible light. The g-C₃N₄/TNAs photoelectrodes exhibited excellent visible-light response, efficient charges separation and high redox potentials of electron/hole, which was favorable for p-CNB degradation. The radical scavenging experiments indicated that both reductive electrons and oxidized species (holes and ·OH) played crucial roles simultaneously during the dechlorination process, whereas the mineralization of p-CNB mainly depended on the photo-generated holes and ·OH. The degradation pathways of p-CNB were proposed through GC/MS spectra. The acute toxicity, bioaccumulation factor and mutagenicity of identified intermediates were reduced after PEC degradation by g-C₃N₄/TNAs photoelectrodes. The Z-scheme g-C₃N₄/TNAs provided an efficient approach for simultaneous dechlorination and mineralization of refractory pollutants.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Construction of TiO2-MnO2 0D-2D nanostructured heterojunction for enhanced photocatalytic hydrogen production

The low transfer efficiency and high recombination loss of photo-induced carriers in TiO2 are significant issues that hinder its photocatalytic activity. Herein, TiO2 nanoparticles (∼5 nm) were loaded on MnO2 nanosheets (40-60 nm) to form TiO2-MnO2 nanostructured heterojunction (0D-2D nanostructure unit), possessing a high specific surface area. The separation/transfer efficiency of photocarriers and the solar absorptivity of TiO2-MnO2 were improved, thus enhancing solar energy conversion efficiency. The enhanced transfer efficiency of carriers is associated with the 2D network of MnO2 and abundant oxygen vacancies serving as media for electron transport. The enhanced visible absorption and reduced recombination should be attributed to the narrowed bandgap and modified energy band structure. The photocurrent of TiO2-MnO2 increased obviously and the H2 production rate increased to 0.38 mmol g-1 h-1, compared with that of pure TiO2 (0.25 mmol g-1 h-1). The enhanced photocatalytic properties are also associated with the excellent water oxidation kinetics caused by MnO2 nanosheets.

Rolling circle amplification promoted magneto-controlled photoelectrochemical biosensor for organophosphorus pesticides based on dissolution of core-shell MnO2 nanoflower@CdS mediated by butyrylcholinesterase

A photoelectrochemical (PEC) aptasensing platform is devised for sensitive detection of an organophosphorus pesticide based on dissolution of core-shell MnO₂ nanoflower@CdS (MnO₂ NF@CdS) by thiocholine (TCh). TCH is produced from the butyrylcholinesterase-acetylthiocholine system, accompanied by target-triggered rolling circle amplification (RCA). The core-shell MnO₂ NF@CdS with excellent PEC performance was synthesized and employed as a photo-sensing platform. The target was detected on a functionalized magnetic probe with the corresponding aptamer. Upon malathion introduction, the aptamer was detached from the magnetic beads, while capture DNA (cDNA, with primer fragment) remained on the beads. The primer fragment in cDNA can trigger the RCA reaction to form a long single-stranded DNA (ssDNA). Furthermore, a large number of butyrylcholinesterase (BChE) were assembled on the long ssDNA strands through the hybridization with the S₂-Au-BChE probe. Thereafter, TCh generated from hydrolysis of ATCh by BChE can reduce MnO₂ NF (core) to Mn²⁺ and release the CdS nanoparticles (shell) from the platform electrode, significantly enhancing the PEC signal. Under optimal conditions, the proposed aptasensor exhibited high sensitivity for malathion with a low detection limit of 0.68 pg mL^-1. Meanwhile, it also presents outstanding specificity, reproducibility, and stability. Importantly, the sensing platform provides a new concept for detection of pesticide. Graphical abstract Herein, this work devised a photoelectrochemical (PEC) aptasensing platform for sensitive detection of organophosphorus pesticide based on dissolution of core-shell MnO₂ nanoflower@CdS (MnO₂ NF@CdS) by the as-produced thiocholine (TCh) from the butyrylcholinesterase-acetylthiocholine system, accompanying with the target-triggered rolling circle amplification (RCA).

Experimental study on the optimisation of azo-dyes removal by photo-electrochemical oxidation with TiO2 nanotubes

An experimental investigation is here presented on the photo-electrochemical removal of Methyl Orange (MO), selected as a model of the organic dyes, contained in wastewaters. The process is carried out in an electrochemical flow reactor, in which titania nanotubular electrode is irradiated with a simulated solar light. Design of Experiments (DOE) technique is used to plan the experimental campaign and investigate on the single and combined effects of applied current, electrolyte flow rate, and initial MO concentration, on the specific reaction rate. The results of the DOE analysis, also combined with the study of the distribution of the intermediate products, confirm a reaction mechanism mediated by OH radicals; high applied current and low reactant concentration resulted as favourable conditions to achieve high specific reaction rate of color removal.

Mechanism investigation on the enhanced photocatalytic oxidation of nonylphenol on hydrophobic TiO2 nanotubes

Enhanced and selective photocatalytic oxidation of nonylphenol (NP), a typical hydrophobic endocrine disrupting chemicals (EDCs), was realized on hydrophobic titanium dioxide nanotubes (H-TiO₂NTs), which was fabricated by an electrochemical anodization method, followed by grafting of perfluorooctyl groups. The water contact angle of catalyst surface changed from 21.1° to 128.4° after hydrophobic modification. H-TiO₂NTs showed excellent photocatalytic oxidation performance for NP, that it was completely converted in 40 min under irradiation, which was improved for about 17% compared with the hydrophilic TiO₂NTs. The enhanced photocatalytic performance of H-TiO₂NTs was attributed to the stronger adsorption ability toward NP identified by ATR-FTIR, with an initial adsorption rate of 4 times as higher as that of bare TiO₂NTs. Meanwhile, the hydrophobic surface of H-TiO₂NTs was beneficial for generation of more hydroxyl radicals. The apparent rate constant of hydroxyl radicals' generation on H-TiO₂NTs, which was the main oxidizing species, could reach 1.83 times that of the hydrophilic TiO₂NTs. Both the two factors contributed to the successful competition of NP against the coexistent hydrophilic contaminates in the adsorption and oxidation on the catalyst surface, leading to the selective removal of NP in mixed systems finally.

Oxidative nucleation and growth of Janus-type MnOx-Ag and MnOx-AgI nanoparticles

Janus nanoparticles (NPs) containing two chemically distinct materials in one system are of great significance for catalysis in terms of harnessing catalytic synergies that do not exist in either component. We herein present a novel synthetic method of two Janus-type MnOx-Ag and MnOx-AgI NPs. The synthesis of Janus-type MnOx-AgI NPs is based on the oxidative nucleation and growth of Ag domains on MnO first and the subsequent iodization of Ag. A mild and non-disruptive iodization strategy is developed to yield Janus MnOx-AgI NPs, in which converting Ag to AgI domains with iodomethane (CH3I) is achieved through partial iodization. Simultaneously, Mn2+ species in the primary MnO octahedra are oxidized during the growth of Ag NPs, leading to the formation of amorphous p-type MnOx domains. Therefore, the as-resultant Janus-type MnOx-AgI NPs combining two semiconductors into an integrated nanostructure can be used as an efficient photocatalyst for visible-light-driven water oxidation. Janus MnOx-AgI NPs show an expected photocatalytic activity even in the absence of Ru(bpy)3Cl2 as an electron mediator. This intriguing synthesis may offer a new opportunity to develop asymmetric nanostructures of two semiconductors that will potentially be efficient photocatalysts for solar-driven water splitting.

Degradation of nitrobenzene by synchronistic oxidation and reduction in an internal circulation microelectrolysis reactor

The degradation of nitrobenzene by synchronistic oxidation and reduction was investigated using an internal circulation microelectrolysis (ICE) reactor with an active volume of 0.018 m³. Compared with a conventional fixed bed reactor with and without aeration, the ICE reactor exhibited a markedly higher nitrobenzene degradation efficiency. The effects of various operational parameters such as reaction time, aeration rate, initial nitrobenzene concentration, initial pH, and a volume ratio of iron and carbon (Fe/C) were also investigated. The optimal operating conditions (reaction time = 60 min, aeration rate = 5 × 10^-4 m³/s, initial concentration of nitrobenzene = 300 mg/L, pH = 3.0, Fe/C = 1:1) gave removal efficiencies of nitrobenzene and chemical oxygen demand of 98.2% and 58%, respectively. The biodegradability index of the treated nitrobenzene solution was 0.45, which is 22 times that of the original solution. The reaction intermediates were identified through high-performance liquid chromatography, ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, gas chromatography-mass spectrometry, and ion chromatography. The primary intermediates were determined to be aniline, phenol, and carboxylic acids, indicating that nitrobenzene was synchronously oxidized and reduced in the ICE reactor. Based on the identified intermediates, a possible pathway for nitrobenzene degradation in the ICE reactor is proposed.