Aldehyde-containing nanofibers electrospun from biomass vanillin-derived polymer and their application as adsorbent

Antibacterial aroma compounds as property modifiers for electrospun biopolymer nanofibers of proteins and polysaccharides: A review

Electrospinning is one of the most promising techniques for producing biopolymer nanofibers for various applications. Proteins and polysaccharides, among other biopolymers, are attractive substrates for electrospinning due to their favorable biocompatibility and biodegradability. However, there are still challenges to improve the mechanical properties, water sensitivity and biological activity of biopolymer nanofibers. Therefore, these strategies such as polymer blending, application of cross-linking agents, the addition of nanoparticles and bioactive components, and modification of biopolymer have been developed to enhance the properties of biopolymer nanofibers. Among them, antibacterial aroma compounds (AACs) from essential oils are widely used as bioactive components and property modifiers in various biopolymer nanofibers to enhance the functionality, hydrophobicity, thermal properties, and mechanical properties of nanofibers, which depends on the electrospun strategy of AACs. This review summarizes the recently reported antimicrobial activities and applications of AACs, and compares the effects of four electrospinning strategies for encapsulating AACs on the properties and applications of nanofibers. The authors focus on the correlation of the main characteristics of these biopolymer electrospun nanofibers with the encapsulation strategy of AACs in the nanofibers. Moreover, this review also particularly emphasizes the impact of the characteristics of these nanofibers on their application field of antimicrobial materials.

Chiroptical Elastomer Film Constructed by Chiral Helical Substituted Polyacetylene and Polydimethylsiloxane: Multiple Stimuli Responsivity and Chiral Amplification

Chiral and circularly polarized luminescence (CPL) materials with multiple stimuli responses have become a focus of attention. Meanwhile, elastomers have found substantial applications in a wide variety of fields. However, how to design and construct chiral elastomers, in particular CPL-active elastomers, still remains an academic challenge. In the present study, chiral helical substituted polyacetylene is chemically bonded with polydimethylsiloxane (PDMS) by hydrosilylation to form a chiroptically active elastomer. A CPL-active film was further fabricated by adding achiral fluorophores. Compared with the corresponding chiral helical polymer, the chiral films show much enhanced thermal stability in terms of chiroptical properties. The films also demonstrate reversible tunability in optical activity and CPL property when being subjected to a stretching-restoring process and exposed to a solvent like toluene. Further, noticeable chiral amplification is observed when the chiral PDMS film is superimposed with a pure PDMS film. This interesting finding is proposed to be due to the photoreflectivity of PDMS. This study provides an alternative strategy to exploit novel CPL-active elastomer materials with multiple stimuli responsivity and tunability, which may open up new opportunities for developing novel chiroptical devices.

Freezing-triggered gelation of quaternized chitosan reinforced with microfibrillated cellulose for highly efficient removal of bilirubin

The highly efficient removal of bilirubin from blood by hemoperfusion for liver failure therapy remains a challenge in the clinical field due to the low adsorption capacity and poor hemocompatibility of currently used carbon-based adsorbents. Polysaccharide-based cryogels seem to be promising candidates for hemoperfusion adsorbents owing to their inherited excellent hemocompatibility. However, the weak mechanical strength and relatively low adsorption capacity of polysaccharide-based cryogels limited their application in bilirubin adsorption. In this work, we presented a freezing-triggered strategy to fabricate QCS/MFC cryogels, which were formed by quaternized chitosan (QCS) crosslinked with divinylsulfonyl methane (BVSM) and reinforced with microfibrillated cellulose (MFC). Ice crystal exclusions triggered the chemical crosslinking to generate the cryogels with dense pore walls. The obtained QCS/MFC cryogels were characterized by FTIR, SEM, stress-strain test, and hemocompatibility assay, which exhibited interconnected macroporous structures, excellent shape-recovery and mechanical performance, and outstanding blood compatibility. Due to the quaternary ammonium functionalization of chitosan, the QCS/MFC showed a high adsorption capacity of 250 mg g^-1 and a short adsorption equilibrium time of 3 h. More importantly, the QCS/MFC still exhibited high adsorption efficiency (over 49.7%) in the presence of 40 g L^-1 albumin. Furthermore, the QCS/MFC could also maintain high dynamic adsorption efficiency in self-made hemoperfusion devices. This facile approach provides a new avenue to develop high-performance hemoperfusion adsorbents for bilirubin removal, showing great promise for the translational therapy of hyperbilirubinemia.

Tri-functional aerogel photocatalyst with an S-scheme heterojunction for the efficient removal of dyes and antibiotic and hydrogen generation

A novel three-dimensional (3D) S-scheme S-gC₃N₄/TiO₂/SiO₂/PAN aerogel heterojunction photocatalyst (denoted as S-gTAHP) is rationally devised and manufactured by combining electrospinning, calcination, hydrothermal and freeze-drying techniques. The synthesized S-gC₃N₄ molecule is different from traditional g-C₃N₄, which has a small molecular structure similar to melamine. S-gC₃N₄ is embedded in the interwoven network structure of TiO₂/PAN short fibers, and the catalytic system of the S-scheme heterojunction is formed with SiO₂ as a crosslinking agent. S-gTAHP achieves perfect tri-functional photocatalytic capability, including remarkable hydrogen release capacity (806.7 μmol∙h^-1∙g^-1), efficient removal of three colored dyes with removal efficiencies up to 99.43% (MB, 15 min), 96.13% (RhB, 30 min) and 91.32% (MO, 40 min), and a degradation rate of the colorless antibiotic TCH reaching 84.20% in 40 min driven by simulated sunlight. Meanwhile, the effects of pH values and concentrations of contaminant solutions on the removal rates are explored, and the S-scheme mechanism of S-gTAHP strengthening photocatalytic activity is elucidated. The apparently heightened photocatalytic activities of S-gTAHP can be ascribed to the fact that the 3D hierarchical porous structure of the aerogel endows more active centers and enhanced light-harvesting capacity, and the S-scheme heterojunction supplies effective charge migrating channels, thereby affording the carriers with strong redox capability. Furthermore, S-gTAHP holds prominent reusability and is light weight. Hence, efficient and recyclable 3D aerogel photocatalysts with S-scheme heterojunctions have broad application prospects in practical sewage treatment and energy conversion fields.

Review of the Recent Advances in Electrospun Nanofibers Applications in Water Purification

Recently, nanofibers have come to be considered one of the sustainable routes with enormous applicability in different fields, such as wastewater treatment. Electrospun nanofibers can be fabricated from various materials, such as synthetic and natural polymers, and contribute to the synthesis of novel nanomaterials and nanocomposites. Therefore, they have promising properties, such as an interconnected porous structure, light weight, high porosity, and large surface area, and are easily modified with other polymeric materials or nanomaterials to enhance their suitability for specific applications. As such, this review surveys recent progress made in the use of electrospun nanofibers to purify polluted water, wherein the distinctive characteristics of this type of nanofiber are essential when using them to remove organic and inorganic pollutants from wastewater, as well as for oil/water (O/W) separation.

Novel and wet-resilient cellulose nanofiber cryogels with tunable porosity and improved mechanical strength for methyl orange dyes removal

Interconnected macro-porous cryogels with robust and pore-tunable structures have been fabricated using chemically crosslinked microfibrillated cellulose (MFC). Periodate oxidation was initially conducted to introduce aldehyde groups into the MFC surface, followed by the freeze-induced chemical crosslinking via the formation of hemiacetal bonds between aldehyde and hydroxyl at -12 °C. The cryogels with pore-tunable structures and sharply enhanced mechanical strengths were finally achieved by re-assembly of MFCs through soaking in NaIO₄ solution. Furthermore, the MFC cryogels were post-crosslinked by polyethyleneimine (PEI), bestowing the cryogels with the capability of adsorbing anionic dyes. The stress of the PEI-MFC cryogel at the 80% strain was determined to be 304.5 kPa, which is the maximum value for the nanocellulose-based cryogels reported so far. Finally, the adsorption performances of PEI-MFC cryogels for methyl orange (MO) were evaluated. Maximum adsorption capacity of 500 mg/g could be obtained by the Langmuir model, outperforming that of previous absorbent materials. Reuse experiments indicated that over 90% of adsorption capacity was retained after 6 cycles. Continuous clean-up experiments demonstrated excellent MO removal abilities of the PEI-MFC cryogel. This study shows that the novel, green strategy to fabricate the robust cryogel extends the practical applications of nanocellulose adsorbents for environmental remediation.

Recent advances in lignin-based porous materials for pollutants removal from wastewater

Water pollution is one of the most serious threats facing mankind today and has obtained widespread attention. Significant advances have been made in the past decades to apply porous materials in wastewater treatment, due to their large specific surface areas (S_BET) for interaction with the aimed ions or molecules. However, the majority of porous materials are prepared from fossil-based resources and still possess some drawbacks, such as high cost and non-degradability, which inevitably cause secondary pollution to the environment from their production to disposal. Lignin is the most abundant and the only scalable renewable aromatic resource on earth. Due to its unique physicochemical properties including high carbon content, plentiful functional groups and environmental friendliness, the lignin-based porous materials (LPMs) have shown promising prospects in efficient removal of soluble pollutants from wastewater. In this review, we firstly described the structural and chemical basis of LPMs, following presented the recent progress in the decontamination of heavy metal ions, organic dyes, antibiotics, anions and radionuclides from aqueous systems. Additionally, the outlook was provided to promote more practical implementation of LPMs in the near future.

Electrospun Carbon Nanofibers from Biomass and Biomass Blends-Current Trends

In recent years, ecological issues have led to the search for new green materials from biomass as precursors for producing carbon materials (CNFs). Such green materials are more attractive than traditional petroleum-based materials, which are environmentally harmful and non-biodegradable. Biomass could be ideal precursors for nanofibers since they stem from renewable sources and are low-cost. Recently, many authors have focused intensively on nanofibers' production from biomass using microwave-assisted pyrolysis, hydrothermal treatment, ultrasonication method, but only a few on electrospinning methods. Moreover, still few studies deal with the production of electrospun carbon nanofibers from biomass. This review focuses on the new developments and trends of electrospun carbon nanofibers from biomass and aims to fill this research gap. The review is focusing on recollecting the most recent investigations about the preparation of carbon nanofiber from biomass and biopolymers as precursors using electrospinning as the manufacturing method, and the most important applications, such as energy storage that include fuel cells, electrochemical batteries and supercapacitors, as well as wastewater treatment, CO2 capture, and medicine.

Recent Advances in Renewable Polymer Production from Lignin-Derived Aldehydes

Lignin directly derived from lignocellulosic biomass has been named a promising source of platform chemicals for the production of bio-based polymers. This review discusses potentially relevant routes to produce renewable aromatic aldehydes (e.g., syringaldehyde and vanillin) from lignin feedstocks (pre-isolated lignin or lignocellulose) that are used to synthesize a range of bio-based polymers. To do this, the processes to make aromatic aldehydes from lignin with their highest available yields are first presented. After that, the routes from such aldehydes to different polymers are explored. Challenges and perspectives of the production the lignin-derived renewable chemicals and polymers are also highlighted.

Coupling the fluorescence and adsorptive properties of biomass-based cellulose–CdS nanocomposite for the alleviation of water contaminants

Integration of CdS nanoparticles with CNF nanofibers for selective fluorescence detection of pharmaceutical waste and adsorptive elimination of textile and pesticide waste.