In situ synthesis of Cu+ self-doped CuWO4/g-C3N4 heterogeneous Fenton-like catalysts: The key role of Cu+ in enhancing catalytic performance

Enhanced inactivation of Escherichia coli through hydrogen peroxide decomposition assisted by nanoscale cupric oxide-decorated activated carbon

In this study, nanoscale cupric oxide-decorated activated carbon (nCuO@AC) was synthesized by impregnation-calcination and employed to assist the decomposition of H2O2 for effective sterilization with Escherichia coli as target bacteria. Characteristic technologies demonstrated that copper oxide particles of 50-100 nm were uniformly distributed on AC surface. Owing to electron transfer from hydroxyl and aldehyde to CuO on AC, surface-bonded Cu(II) was partially reduced to Cu(I) in the nCuO matrix. The resultant Cu(I) expedited the decomposition of H2O2 and converted it into ·OH radicals which were identified by quenching experiment and electron paramagnetic resonance test. Due to oxidation attack of generated ·OH, the nCuO@AC-H2O2 system achieved a much higher inactivation rate of 6.0 log within 30 min as compared to those of 2.1 and 1.3 log in the nCuO@AC and nCuO-H2O2 systems. It also exhibited excellent pH adaptability and high inactivation efficiency under neutral conditions. After four cycles, the nCuO@AC-H2O2 system could still inactivate 5.5 log bacteria, indicating excellent stability and reusability of nCuO@AC. Spent nCuO@AC could be regenerated by eluting surficial copper oxides with hydrochloric acid, and re-coating nCuO particles through impregnation-calcination with a regeneration rate of 96.6%. Our results demonstrated that nCuO@AC was an efficient and prospective catalyst to assist the decomposition of H2O2 for effective inactivation of bacteria in water.

A review of copper-based Fenton reactions for the removal of organic pollutants from wastewater over the last decade: different reaction systems

In recent years, as global industrialization has intensified, environmental pollution has become an increasingly serious problem. Improving water quality and achieving wastewater purification remain top priorities for environmental health initiatives. The Fenton process is favored by researchers due to its high efficiency and ease of operation. Central to the Fenton process is a catalyst used to activate hydrogen peroxide, rapidly degrading pollutants, improving water quality. Among various catalysts developed, copper-based catalysts have attracted considerable attention due to their affordability, high activity, and stable performance. Based on this, this paper reviews the development of copper-based Fenton systems over the past decade. It mainly involves the research and application of copper-based catalysts in different Fenton systems, including photo-Fenton, electro-Fenton, microwave-Fenton, and ultrasonic-Fenton. This review provides a fundamental reference for the subsequent studies of copper-based Fenton systems, contributing to the goal of transitioning these systems from laboratory research into practical environmental applications.

Recent advancements in the fabrication and photocatalytic applications of graphitic carbon nitride-tungsten oxide nanocomposites

The present review focuses on the widely used graphitic carbon nitride (g-C3N4)-tungsten oxide (WO3) nanocomposite in photocatalytic applications. These catalysts are widely employed due to their easy preparation, high physicochemical stability, nontoxicity, electron-rich properties, electronic band structure, chemical stability, low cost, earth-abundance, high surface area, and strong absorption capacity in the visible range. These sustainable properties make them predominantly attractive and unique from other photocatalysts. In addition, graphitic carbon nitride (g-C3N4) is synthesized from nitrogen-rich precursors; therefore, it is stable in strong acid solutions and has good thermal stability up to 600 °C. This review covers the historical background, crystalline phases, density-functional theory (DFT) study, synthesis method, 0-D, 1-D, 2-D, and 3-D materials, oxides/transition/nontransition metal-doped, characterization, and photocatalytic applications of WO3/g-C3N4. Enhancing the catalytic performance strategies such as composite formation, element-doping, heterojunction construction, and nanostructure design are also summarized. Finally, the future perspectives and challenges for WO3/g-C3N4 composite materials are discussed to motivate young researchers and scientists interested in developing environment-friendly and efficient catalysts.

Controllable synthesis of copper-organic frameworks via ligand adjustment for enhanced photo-Fenton-like catalysis

The efficient heterogeneous photo-Fenton-like catalysts based on two secondary ligand-induced Cu(II) metal-organic frameworks (Cu-MOF-1 and Cu-MOF-2) were constructed for the first time and investigated for the degradation of multiple antibiotics. Herein, two novel Cu-MOFs were prepared using mixed ligands by a facile hydrothermal method. The one-dimensional (1D) nanotube-like structure could be obtained by using V-shaped, long and rigid 4,4'-bis(3-pyridylformamide)diphenylether (3-padpe) ligand in Cu-MOF-1, while polynuclear Cu cluster could be prepared more easily by using short and small isonicotinic acid (HIA) ligand in Cu-MOF-2. Their photocatalytic performances were measured by degradation of multiple antibiotics in Fenton-like system. Comparatively, Cu-MOF-2 exhibited superior photo-Fenton-like performance under visible light irradiation. The outstanding catalytic performance of Cu-MOF-2 was ascribed to the tetranuclear Cu cluster configuration and excellent ability of photoinduced charge transfer and hole separation thus improved the photo-Fenton activity. In addition, Cu-MOF-2 showed high photo-Fenton activity in wide pH working range 3-10 and maintained wonderful stability after five cyclic experiments. The degradation intermediates and pathways were deeply studied. The main active species h⁺, O₂^- and OH worked together in photo-Fenton-like system and possible degradation mechanism was proposed. This study provided a new approach to design the Cu-based MOFs Fenton-like catalysts.

Enhanced activation of H2O2 by bimetallic Cu2SnS3: A new insight for Cu (II)/Cu (I) redox cycle promotion

HYPOTHESIS

Despite that the development of Cu₂SnS₃ (CTS) catalyst has attracted increasing interests, few study has reported to investigate its heterogeneous catalytic degradation of organic pollutants in a Fenton-like process. Furthermore, the influence of Sn components towards Cu (II)/Cu (I) redox cycling in CTS catalytic systems remains a fascinating research.

EXPERIMENTS

In this work, a series of CTS catalysts with controlled crystalline phases were prepared via a microwave-assisted pathway and applied in the H₂O₂ activation for phenol degradation. The efficiency of phenol degradation in CTS-1/H₂O₂ system (CTS-1: the molar ratio of Sn (copper acetate) and Cu (tin dichloride) is determined to be Sn:Cu = 1:1) was systematically investigated by controlling various reaction parameters including H₂O₂ dosage, initial pH and reaction temperature. We discovered that Cu₂SnS₃ exhibited superior catalytic activity to the contrast monometallic Cu or Sn sulfides and Cu (I) acted as the dominant active sites. The higher Cu (I) proportions conduce to the higher catalytic activities of CTS catalysts. Quenching experiments and electron paramagnetic resonance (EPR) further proved that the activation of H₂O₂ by CTS catalyst produces reactive oxygen species (ROS) and subsequently leads to degradation of the contaminants. A reasonable mechanism of enhanced H₂O₂ activation in Fenton-like reaction of CTS/H₂O₂ system was proposed for phenol degradation by investigating the roles of copper, tin and sulfur species.

FINDINGS

The developed CTS acted as a promising catalyst in Fenton-like oxidation progress for phenol degradation. Importantly, the copper and tin species contribute to a synergetic effect for the promotion of Cu (II)/Cu (I) redox cycle, which thus enhanced the activation of H₂O₂. Our work may offer new insight on the facilitation of Cu (II)/Cu (I) redox cycle in Cu-based Fenton-like catalytic systems.

Revealing the stability of CuWO4/g-C3N4 nanocomposite for photocatalytic tetracycline degradation from the aqueous environment and DFT analysis

Graphitic carbon nitride (g-C₃N₄) is an emerging metal-free photocatalyst, however, engineering the photocatalytic efficiency for the effective degradation of hazardous molecules is still challenging. An unstable and low bandgap CuWO₄ was composited with g-C₃N₄ to achieve synergistic benefits of tuning the visible light responsiveness and stability of CuWO₄. CuWO₄/g-C₃N₄ nanocomposite exhibited a relatively high visible light absorption region and the bandgap was modified from 2.77 to 2.53 eV evidenced via UV-DRS. Moreover, the fast electron transfer rate was observed with CuWO₄/g-C₃N₄ nanocomposite as confirmed using PL and photocurrent studies. XRD, FT-IR, and HR-TEM analyses signified the formation of CuWO₄/g-C₃N₄ nanocomposite. CuWO₄/g-C₃N₄ nanocomposite showed enhanced photocatalytic degradation of Tetracycline (TC) about ∼7.4 fold greater than pristine g-C₃N₄ in 120 min. Notably, the OH^• and ^•O₂^- radicals played a most significant role in photocatalytic TC degradation. Furthermore, the energy band structure, density of state, and Bader charge analyses of these molecules were performed.

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

Cu-doped g-C3N4 catalyst with stable Cu0 and Cu+ for enhanced amoxicillin degradation by heterogeneous electro-Fenton process at neutral pH

The development of new heterogeneous Cu-based solid catalysts for hydroxyl radical (∙OH) generation plays a crucial role in degradation of pollutants at neutral pH circumstance. In this work, a Cu-doped graphitic carbon nitride (g-C₃N₄) complex was synthesized in one-step pyrolysis process using copper chloride dihydrate and dicyandiamide as precursors. The results reveal that after Cu doping, the bulk structure of g-C₃N₄ was destroyed with fragmentary morphology formation. Besides, Cu⁰ and Cu⁺ were successfully embedded in g-C₃N₄ sheet. Moreover, amoxicillin (AMX) removal by heterogeneous electro-Fenton process was performed to evaluate the catalytic activity of the Cu-doped g-C₃N₄. 99.1% AMX removal efficiency was obtained after 60 min electrolysis under neutral pH condition when the current density was 12 mA cm² and the catalyst dosage was 0.3 g L^-1. Both Cu⁰ and Cu⁺ were stably retained in the Cu-doped g-C₃N₄ catalyst and AMX removal efficiency reached 91.1%, even after 5 cycles, manifesting the remarkable stability of Cu-doped g-C₃N₄. Also, Cu-doped g-C₃N₄ possessed excellent catalytic activities for AMX removal in various waterbodies. According to the catalytic mechanism analysis, the ∙OH was proved to be the primary reactive species for AMX removal in heterogeneous electro-Fenton process. Based on the identification of sixteen different intermediate products, the possible degradation pathways were proposed. This work provides a simple method to synthesize a Cu-based solid catalyst containing stable Cu⁰ and Cu ⁺ for degradation of pollutants in wastewater.

A novel high rotation bubble reactor for the treatment of a model pollutant in ozone/goethite/H2O2 and UV/goethite coupled processes

This work proposes a novel approach for the coupling of ozonation and Fenton processes using a new prototype of a high rotation bubble reactor (HRBR), which improves utilization of the ozone and hydrogen peroxide through bubble generation and axial and radial dispersion of the flow. The HRBR integrates the rotor and the diffuser in the same device facilitating the generation and dispersion of the ozone bubbles inside the reaction tank. Thus, the mass transfer to the liquid phase is enhanced. Most of the experiments were carried out under neutral pH and 1580 rpm of agitation during the 20 min of reaction. Total ibuprofen degradation was achieved within 20 min of operation for most of the couplings and individual processes evaluated. It was successfully demonstrated that the HRBR can be used as a reactive system for heterogeneous Fenton and ozonation coupling because it presents a high synergy. For the ozonation process, the reactor also displayed a good performance because the residual ozone in the gas is lower than 0.4 mg/L, which indicates that there is a suitable ozone utilization. Ibuprofen degradation by other processes like oxidation direct by H₂O₂ and heterogeneous Fenton was 28.0% and 73.1%, respectively. It was determined that the reaction rate, synergy, OUI (ozone utilized index), and consumption of electrical energy (EE/O) of the coupled processes could be improved by using the HRBR depending on the experimental conditions.

Enhanced Fenton-like catalytic activity and stability of g-C3N4 nanosheet-wrapped copper phosphide with strong anti-interference ability: Kinetics and mechanistic study

Metal-based Fenton-like catalysts usually activate H₂O₂ to produce free radicals (^•OH and O₂^•-) for the degradation of organic pollutants. However, a catalytic reaction dominated by free radicals is easily interfered with by various inorganic anions and water matrices. Herein, g-C₃N₄-wrapped copper phosphide (Cu_xP), as a highly efficient Fenton-like catalyst, was successfully synthesized by a simple low-temperature phosphidation method. The Cu_xP/g-C₃N₄ catalyst exhibited excellent catalytic ability for the removal of various organic contaminants over a wide pH range of 3-11. In addition, the catalyst exhibited strong anti-interference ability toward various inorganic anions (Cl^-, SO₄^2-, NO₃^-, F^-, H₂PO₄^-, HCO₃^- and CO₃^2-) and water matrices (lake water, river water, tap water and simulated water matrix). The reasons for this performance were analyzed by verifying the mechanism of the catalytic reaction. Compared to the pure Cu_xP catalyst, the Cu_xP/g-C₃N₄ composite possessed good catalytic stability. The enhanced and deactivated mechanisms of the Cu_xP/g-C₃N₄ catalyst were systematically analyzed by a series of characterization techniques. A possible reaction mechanism was also proposed based on the experimental results. This work provides new insights into designing highly efficient metal-based Fenton-like catalysts with strong anti-interference ability to practically treat wastewater.

Enhanced degradation of sulfamethoxazole by a novel Fenton-like system with significantly reduced consumption of H2O2 activated by g-C3N4/MgO composite

Advanced oxidation processes (AOP) based on nonradicals have attracted growing attentions because nonradical systems require much less oxidants and have low susceptibility to radical scavengers. Herein, a novel Fenton-like system that utilizes nonradicals was explored. It was derived from g-C₃N₄/MgO activated H₂O₂, and can reduce the H₂O₂ stoichiometry from 0.94%-0.18% to 0.03%. Sulfamethoxazole (SMX), a widely used sulfonamide, was used as the model pollutant to evaluate the efficacy of the system. It was observed for the first time that organic pollutants can be degraded with singlet oxygen (¹O₂) through a nonradical pathway in the g-C₃N₄/MgOH₂O₂ system. The reduced H₂O₂ consumption was the net result of continuously-recycled H₂O₂ from the reactions between H₂O₂ and g-C₃N₄/MgO. Based on experimental results and theoretical calculations, the synthesis of g-C₃N₄ and MgO forms a N-Mg bond with strong ability to absorb electrons and the electron transfer of H₂O₂ to N-Mg bonding is accelerated, activation of H₂O₂ to generate ¹O₂. Experimental data showed that organic pollutants can be degraded rapidly over a wide pH range. Findings of this study point to a cyclical but stable Fenton-like system with reduced H₂O₂ requirement for cost-effective remediation and treatment of organic pollutants and toxic wastes.

Construction of a novel Cu2(OH)3F/g-C3N4 heterojunction as a high-activity Fenton-like catalyst driven by visible light

Inhibiting the competitive effect of O₂ in copper-based Fenton reagents and improving the photogenerated electron–hole pair separation of g-C₃N₄ are the focus of current research.

Pt-based nanoparticles decorated by phosphorus-doped CuWO4 to enhance methanol oxidation activity

DMFCs are promising power storage devices, while for methanol oxidation reaction, weak catalysis and carbon monoxide poisoning greatly limit their wide commercialization, so it's greatly necessary to exploit the anode catalysts with high performance.