Unique multi-hierarchical Z-scheme heterojunction of branching SnIn4S8 nanosheets on ZnIn2S4 nanopetals for boosted photocatalytic performance

A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.

Controlled solvothermal synthesis of self-assembled SrTiO3 microstructures for expeditious solar-driven photocatalysis dye effluents degradation

In this work, the self-assembled SrTiO3 (STO) microstructures were synthesized via a facile one-step solvothermal method. As the solvothermal temperature increased from 140 °C to 200 °C, the STO changed from a flower-like architecture to finally an irregularly aggregated flake-like morphology. The photocatalytic performance of as-synthesized samples was assessed through the degradation of rhodamine B (RhB) and malachite green (MG) under simulated solar irradiation. The results indicated that the photocatalytic performance of STO samples depended on their morphology, in which the hierarchical flower-like STO synthesized at 160 °C demonstrated the highest photoactivities. The photocatalytic enhancement of STO-160 was benefited from its large surface area and mesoporous configuration, hence facilitating the presence of more reactive species and accelerating the charge separation. Moreover, the real-world practicality of STO-160 photocatalysis was examined via the real printed ink wastewater-containing RhB and MG treatment. The phytotoxicity analyses demonstrated that the photocatalytically treated wastewater increased the germination of mung bean seeds, and the good reusability of synthesized STO-160 in photodegradation reaction also promoted its application in practical scenarios. This work highlights the promising potential of tailored STO microstructures for effective environmental remediation applications.

Advances in Hierarchical Inorganic Nanostructures for Efficient Solar Energy Harvesting Systems

The urgent need to address the global energy and environmental crisis necessitates the development of efficient solar-power harvesting systems. Among the promising candidates, hierarchical inorganic nanostructures stand out due to their exceptional attributes, including a high specific surface area, abundant active sites, and tunable optoelectronic properties. In this comprehensive review, we delve into the fundamental principles underlying various solar energy harvesting technologies, including dye-sensitized solar cells (DSSCs), photocatalytic, photoelectrocatalytic (water splitting), and photothermal (water purification) systems, providing a foundational understanding of their operation. Thereafter, the discussion is focused on recent advancements in the synthesis, design, and development of hierarchical nanostructures composed of diverse inorganic material combinations, tailored for each of these solar energy harvesting systems. We meticulously elaborate on the distinct synthesis methods and conditions employed to fine-tune the morphological features of these hierarchical nanostructures. Furthermore, this review offers profound insights into critical aspects such as electron transfer mechanisms, band gap engineering, the creation of hetero-hybrid structures to optimize interface chemistry through diverse synthesis approaches, and precise adjustments of structural features. Beyond elucidating the scientific fundamentals, this review explores the large-scale applications of the aforementioned solar harvesting systems. Additionally, it addresses the existing challenges and outlines the prospects for achieving heightened solar-energy conversion efficiency.

Simultaneous Photocatalytic Tetracycline Oxidation and Cr(VI) Reduction by Z-Scheme Multiple Layer TiO2/SnIn4S8

Wastewater pollutants are a major threat to natural resources, with antibiotics and heavy metals being common water contaminants. By harnessing clean, renewable solar energy, photocatalysis facilitates the synergistic removal of heavy metals and antibiotics. In this paper, MXene was both a template and raw material, and MXene-derived oxide (TiO2) and SnIn4S8 Z-scheme composite materials were synthesized and characterized. The synergistic mode of photocatalytic reduction and oxidation leads to the enhanced utilization of e-/h+ pairs. The TiO2/SnIn4S8 exhibited a higher photocatalytic capacity for the simultaneous removal of tetracycline (TC) (20 mg·L-1) and Cr(VI) (15 mg·L-1). The main active substances of TC degradation and Cr(VI) reduction were identified via free radical scavengers and electron paramagnetic resonance (EPR). Additionally, the potential photocatalytic degradation route of TC was thoroughly elucidated through liquid chromatography-mass spectrometry (LC-MS).

Three-Dimensional Multihierarchical Hexagonal/Cubic ZnIn2S4 S-Scheme Heterophase Junction for Superior Photocatalysis

It is an important strategy to design composite materials with a special microstructure and a tunable electronic structure through structural compatibility. In this work, a novel hexagonal/cubic ZnIn2S4 polymorphic heterophase junction with a three-dimensional multihierarchical structure is successfully constructed by in situ growth of hexagonal ZnIn2S4 nanosheets on the surface of cubic ZnIn2S4 flower-like microspheres prepared by topological chemical synthesis. On the one hand, the multihierarchical architecture provides large specific surface area, abundant active sites, and excellent light trapping capability. On the other hand, the construction of a direct S-scheme heterophase junction enables the formation of a special charge-transfer channel under the force of a built-in electric field, which not only improves the separation efficiency of carriers but also ensures the stronger reaction activity of charges. The prepared ZnIn2S4 heterophase junction composite photocatalyst exhibits greatly boosted photocatalytic efficiency in rhodamine B degradation, hexavalent chromium reduction, and water splitting for hydrogen production, which are 12.3, 6.5, and 3.1 times higher than that of pure hexagonal ZnIn2S4 and 8.1, 5.1, and 2.3 times higher than that of pure cubic ZnIn2S4, respectively, demonstrating its significant potential for applications in energy and environmental fields.

Designing Surface-Defect Engineering to Enhance the Solar-Driven Conversion of CO2 to C2 Products over Zn3In2S6/ZnS

The manipulation of electronic structure and prevention of photogenerated carriers from being quenched in bulk defects during the photocatalytic CO2 reduction reaction (CRR) have been effectively demonstrated through surface vacancy and defect engineering. In this work, the electronic structure on the surface of Zn3In2S6/ZnS (ZIS/ZnS) is significantly modified by the introduction and control of the surface S vacancies (SV) through Ar-plasma treatment. EPR and XPS analyses confirmed that SV was exclusively present on the ZIS/ZnS surface. The resulting ZIS/ZnS heterojunction photocatalysts demonstrate an impressive 46.6% selectivity toward C2 products even in the absence of cocatalysts. The mechanism of photocatalytic CRR is further elucidated through in situ analysis. Theoretical calculations demonstrate that the presence of In and Zn atoms adjacent to SV significantly enhances the adsorption of CO2 and facilitates C-C coupling.

Label-free "signal-off" PEC aptasensor for determination of kanamycin based on 3D nanoflower-like FeIn2S4/CdS Z-scheme heterostructures

Highly photoactive 3D nanoflower-like FeIn2S4/CdS heterostructures were synthesized by hydrothermal treatment and low-temperature cation exchange. The FeIn2S4/CdS displayed 14.5 times signal amplification in contrast to FeIn2S4 alone. It was applied as a photoactive substrate to construct a label-free photoelectrochemical (PEC) aptasensor for ultrasensitive determination of kanamycin (KAN). Under the optimal conditions, the constructed PEC aptasensor displayed a wide linear range (5.0 × 10-4 ~ 5.0 × 101 ng mL-1) and a low detection limit (S/N = 3) of 40.01 fg mL-1. This study provides some constructive insights for preparation of advanced photoactive materials and exhibits great potential for quantitative determination of antibiotics in foods and environmental samples.

Vacancy-Mediated Z-Scheme Heterostructure in SnO2-Decorated Spinel In3-xS4 with Boosted Photocatalytic Activity

The widespread application of dyes and heavy metals causes increasing environmental pollution. One effective way to mitigate environmental pollution is to use semiconductor photocatalysts for redox purification of pollutants. Heterostructured photocatalysts can reduce the electron-hole recombination rate and improve light utilization. In this work, a novel SnO₂/In_3-xS₄ composite with oxygen vacancy defect-mediated Z-scheme heterostructure is constructed for the first time by a one-pot method, in which SnO₂ ultrasmall nanocrystals are decorated on nanopetals of flower-like In_3-xS₄. Material analyses show that the as-built three-dimensional hierarchical architecture is able to essentially increase the specific surface area and thus the active sites of the products. More importantly, the formation of Z-scheme heterojunction between the oxygen vacancy-induced SnO₂ defect level and the In_3-xS₄ band structure not only promotes the separation of photogenerated charges but also makes them more reactive. Through the optimization of the composition ratio between the two phases, the visible-light-driven photocatalytic reaction rates of rhodamine B degradation and Cr(VI) reduction for the developed SnO₂/In_3-xS₄ composite photocatalyst are 12.8 and 6.3 times of bare In_3-xS₄ and 32.0 and 76.0 times of bare SnO₂, respectively. This work should provide a promising implication for designing new high-performance composite photocatalysts.